XN6-BKDW45Flicks Portable Projector

TURN ON THE MASTER SWITCH You won’t be able to operate Flicks withou t turning on the master switch located at the bottom of Flicks CHARGE YOUR FLICKSFully charge your Flicks using the included power adapter before firs t use. It would ta ke approximately 4 to 10 hours to fu lly charge your Fl icks depending on the Flicks models you purchase. • 140WH Flicks model fully charged in 4 to 6 hours • 280WH Flicks model fully charged in 8 to 10 hours WATCH MOVIES ON FLICKSTURNING ON PROJECTOR1.Press and hold t he projector power butto n for 2 seconds to turn on the projector . The speakers will turn on automatically along with the projector so yo u don’t need to do anything else. 2.Connect Flicks to your HDMI- compatible device using the included HDMI cable.ADJUSTING VOLUMEAdjust the volume of your movie by pressing the + and - buttons located on the top panel of Flicks.ADJUSTING FOCUSRotate the focus ri ng clockwise/counter clockwise to sharpen the image.TURNING OFF PROJECTORPress and hold the projector power button for 2 seconds and follow the on-screen instruction to turn off the projector by pressing the projector power button again. fli c k s Quick Start Guide LISTEN TO BLUETOOTH MUSIC ON FLICKSTURNING ON SPEAKER1.Press and hold the sp eaker power button for 2 seconds to turn on the speakers. 2.Turn on Bluetooth on your Bluetooth-enabled device. 3.When prompted, select “D ashbon Flicks” to pair. It may take up to a minute to pair. ADJUSTING VOLUMEAdjust the music volume by pressing the + and - buttons located on the top pane l of Flicks or the volume buttons on your Blue tooth-enabled device. TURNING OFF SPEAKERPress and hold t he speaker power butt on for 2 seconds to turn off the speaker. WARNING ! Do not look directly into the projector beam SAFETY The lightning flash with arrow-head symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the unit’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit. WARNINGS • To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture. • Do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on or near the apparatus. As with any electronic products, use care not to spill liquids into any part of the system. Liquids can cause a failure and/or a fire hazard. • Do not place any naked flame sources, such as lighted candles, on or near the apparatus. • Do not use any charger other than that specifically provided for use with the equipment. • The battery needs to be charged before use. Always use the correct charger and refer to the manufacturer’s instructions or equipment manual for proper charging instructions. • After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain maximum performance. • The battery pack gives its best performance when it is operated at normal room temperature (68°F +/- 23°F or 20°C +/- 5°C). • Do not leave a battery on prolonged charge when not in use. • The battery pack shall not be exposed to excessive heat such as sunshine, fire or the like. • Do not subject battery pack to mechanical shock. • In the event of fluid from the battery leaks from the equipment, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice. • Do not use any battery pack which is not designed for use with the equipment. • Keep battery pack clean and dry. • For battery replacement, please contact Dashbon Customer Service. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Only use attachments/accessories specified by the manufacturer. 10. Unplug this apparatus during lightning storms or when unused for long periods of time. 11. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 12. Do not block any ventilation openings. To ensure reliable operation of the projector and to protect from overheating, it is recommended to install the projector in a location that does not block ventilation. As an example, do not place the projector on a crowded coffee table, sofa, bed, etc. Do not put the projector in an enclosure such as a book case or a cabinet that restricts air flow. 13. Do not use the projector near water or moisture. To reduce the risk of fire and/or electric shock, do not expose the projector to rain or moisture. 14. Do not install near heat sources such as radiators, heaters, stoves or any other apparatus such as amplifiers that emits heat. 15. Clean only with dry cloth. 16. Only use attachments/accessories specified by the manufacturer. 17. Do not use the unit if it has been physically damaged or abused. 18. Physical damage/abuse would be (but not limited to): • Unit has been dropped. • Power supply cord or plug has been damaged. • Liquid has been spilled on to the projector. • Projector has been exposed to rain or moisture. • Something has fallen in the projector or something is loose inside. 19. Do not attempt to ser…

Text truncated - open the document above for the full version.

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 4.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (current) 3.0 4.0 March-26-2015 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 4.0 Zylux Acoustic Corporation Aug 11, 2015 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: XN6-BKDW45 We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature: Client’s name: Percy Lee Contact information / address: 3F, 22 Lane 35, Jihu Road, NeiHu Technolongy Park, 114 Taipei Taiwan Client’s Email: [email protected]

Zylux Acoustic Corporation Date: Aug 18, 2015 FCC ID: XN6-BKDW45 Statement Model number: BK01DW45A﹡, BK02DW45A﹡, BK03DW45A﹡, BK04DW45A﹡ Note: 1.character“﹡”can be A-Z or Blank, indicate different Color 2. Except that the battery capacity is not the same between BK01DW45A﹡ and BK02DW45A﹡, other circuits are the same. 3.BK03DW45A﹡, BK04DW45A﹡are identical with BK01DW45A﹡, BK02DW45A﹡ in interior structure, electrical circuits and components We hereby state that the model number is different for the marketing requirement. Your assistance on this matter is highly appreciated. Sincerely, Applicant’s complete, legal business name: Zylux Acoustic Corporation Applicant’s mailing address: 3F, 22 Lane 35, Jihu Road, NeiHu Technolongy Park, 114 Taipei Taiwan Applicant’s Contact Information: Sincerely, Client’s signature: Client’s name: Percy Lee Contact information / address: 3F, 22 Lane 35, Jihu Road, NeiHu Technolongy Park, 114 Taipei Taiwan Client’s Email: [email protected]

External Photos

Label and label location 見備注說明 NOTE : 1. IF TOLERANCE FOR EACH DIMENSIONS NOT SHOWN, REFER TO TABLE <B> TABLE FOR TOLERANCE. 2. USE R=1.0MM FOR ALL RADII NOT SPECIFIED. 3. UNACCEPTABLE CONDITIONS: FLASH, SHRINKAGE, DEFORMATION, AND/OR SPOTS. 4. REPRESENTS REVISIONS OR NEW DIMENSIONS. 5. REPRESENTS CRITICAL AREAS TO BE MEASURED. ALL OTHER DIMENSIONS ARE FOR REFERANCE. 6. THE MOULD NUMBER: NO 7. TEXTURE NUMBER: NO 8. ALL SUBSTANCE NEED TO MEET THE ROHS / REACH REQUIREMENTS. DETAILS REFER TO ZYLUX'S PROCEDURE "QMI-P40-01". 9. WILL USE ±0.05MM INNER DIAMETER FOR THE SCREW WHICH NOT SPECIFIED THE DETAILED DIMENSION. 65.00 55.00 -0.5 +0.5 -0.5 +0.5 Pantone Cool Gray 8C 200#合成纸+光膜 +背壓克力膠 This device compl ies with Part 15 of the FCC Rul es. Operation is subject to the fol lowing two conditions : (1) thi s de vice may not caus e harmful i nt erferenc e, and (2) thi s device mus t accept any int erferenc e received, i nc luding int erferenc e that may caus e undesired operation. CAN ICES-3 (B)/NMB-3(B) Product Name (品名/品名): Flic ks Portable Projector / 便携式投影机 Model (型號/型号): BK01DW45AG FCC ID: XN6-BKDW45 IC:8819A-BKDW45 Input (輸入/输入): 19V 4.74A 製造商/制造商/Made in China XXXXXXXXXXX 208-XXXXX CMIIT ID: 2015DJ3622 15 達信邦科技股份有限公司/Dashbon,Inc. 見備注說明 NOTE : 1. IF TOLERANCE FOR EACH DIMENSIONS NOT SHOWN, REFER TO TABLE <B> TABLE FOR TOLERANCE. 2. USE R=1.0MM FOR ALL RADII NOT SPECIFIED. 3. UNACCEPTABLE CONDITIONS: FLASH, SHRINKAGE, DEFORMATION, AND/OR SPOTS. 4. REPRESENTS REVISIONS OR NEW DIMENSIONS. 5. REPRESENTS CRITICAL AREAS TO BE MEASURED. ALL OTHER DIMENSIONS ARE FOR REFERANCE. 6. THE MOULD NUMBER: NO 7. TEXTURE NUMBER: NO 8. ALL SUBSTANCE NEED TO MEET THE ROHS / REACH REQUIREMENTS. DETAILS REFER TO ZYLUX'S PROCEDURE "QMI-P40-01". 9. WILL USE ±0.05MM INNER DIAMETER FOR THE SCREW WHICH NOT SPECIFIED THE DETAILED DIMENSION. 65.00 55.00 -0.5 +0.5 -0.5 +0.5 Pantone Cool Gray 8C 200#合成纸+光膜 +背壓克力膠 This device compl ies with Part 15 of the FCC Rul es. Operation is subject to the fol lowing two conditions : (1) thi s de vice may not caus e harmful i nt erferenc e, and (2) thi s device mus t accept any int erferenc e received, i nc luding int erferenc e that may caus e undesired operation. CAN ICES-3 (B)/NMB-3(B) Product Name (品名/品名): Flic ks Portable Projector / 便携式投影机 Model (型號/型号): BK01DW45AK FCC ID: XN6-BKDW45 IC:8819A-BKDW45 Input (輸入/输入): 19V 4.74A 製造商/制造商/Made in China XXXXXXXXXXX 208-XXXXX CMIIT ID: 2015DJ3622 15 達信邦科技股份有限公司/Dashbon,Inc. 見備注說明 NOTE : 1. IF TOLERANCE FOR EACH DIMENSIONS NOT SHOWN, REFER TO TABLE <B> TABLE FOR TOLERANCE. 2. USE R=1.0MM FOR ALL RADII NOT SPECIFIED. 3. UNACCEPTABLE CONDITIONS: FLASH, SHRINKAGE, DEFORMATION, AND/OR SPOTS. 4. REPRESENTS REVISIONS OR NEW DIMENSIONS. 5. REPRESENTS CRITICAL AREAS TO BE MEASURED. ALL OTHER DIMENSIONS ARE FOR REFERANCE. 6. THE MOULD NUMBER: NO 7. TEXTURE NUMBER: NO 8. ALL SUBSTANCE NEED TO MEET THE ROHS / REACH REQUIREMENTS. DETAILS REFER TO ZYLUX'S PROCEDURE "QMI-P40-01". 9. WILL USE ±0.05MM INNER DIAMETER FOR THE SCREW WHICH NOT SPECIFIED THE DETAILED DIMENSION. 65.00 55.00 -0.5 +0.5 -0.5 +0.5 Pantone Cool Gray 8C 200#合成纸+光膜 +背壓克力膠 This device compl ies with Part 15 of the FCC Rul es. Operation is subject to the fol lowing two conditions : (1) thi s de vice may not caus e harmful i nt erferenc e, and (2) thi s device mus t accept any int erferenc e received, i nc luding int erferenc e that may caus e undesired operation. CAN ICES-3 (B)/NMB-3(B) Product Name (品名/品名): Flic ks Portable Projector / 便携式投影机 Model (型號/型号): BK01DW45AR FCC ID: XN6-BKDW45 IC:8819A-BKDW45 Input (輸入/输入): 19V 4.74A 製造商/制造商/Made in China XXXXXXXXXXX 208-XXXXX CMIIT ID: 2015DJ3622 15 達信邦科技股份有限公司/Dashbon,Inc. 見備注說明 NOTE : 1. IF TOLERANCE FOR EACH DIMENSIONS NOT SHOWN, REFER TO TABLE <B> TABLE FOR TOLERANCE. 2. USE R=1.0MM FOR ALL RADII NOT SPECIFIED. 3. UNACCEPTABLE CONDITIONS: FLASH, SHRINKAGE, DEFORMATION, AND/OR SPOTS. 4. REPRESENTS REVISIONS OR NEW DIMENSIONS. 5. REPRESENTS CRITICAL AREAS TO BE MEASURED. ALL OTHER DIMENSIONS ARE FOR REFERANCE. 6. THE MOULD NUMBER: NO 7. TEXTURE NUMBER: NO 8. ALL SUBSTANCE NEED TO MEET THE ROHS / REACH REQUIREMENTS. DETAILS REFER TO ZYLUX'S PROCEDURE "QMI-P40-01". 9. WILL USE ±0.05MM INNER DIAMETER FOR THE SCREW WHICH NOT SPECIFIED THE DETAILED DIMENSION. 65.00 55.00 -0.5 +0.5 -0.5 +0.5 Pantone Cool Gray 8C 200#合成纸+光膜 +背壓克力膠 This device compl ies with Part 15 of the FCC Rul es. Operation is subject to the fol lowing two conditions : (1) thi s de vice may not caus e harmful i nt erferenc e, and (2) thi s device mus t accept any int erferenc e received, i nc luding int erferenc e that may caus e undesired operation. CAN ICES-3 (B)/NMB-3(B) Product Name (品名/品名): Flic ks Portable Projector / 便携式投影机 Model (型號/型号): BK01DW45AS FCC ID: XN6-BKDW45 IC:8819A-BKDW45 Input (輸入/输入): 19V 4.74A 製造商/制造商/Made in China XXXXXXXXXXX 208-XXXXX CMIIT ID: 2015DJ3622 15 達信邦科技股份有限公司/Dashbon,Inc. 見備注說明 NOTE : 1. IF TOLERANCE FOR EACH DIMENSIONS NOT SHOWN, REFER TO TABLE <B> TABLE FOR TOLERANCE. 2. USE R=1.0MM FOR ALL RADII NOT SPECIFIED. 3. UNACCEPTABLE CONDITIONS: FLASH, SHRINKAGE, DEFORMATION, AND/OR SPOTS. 4. REPRESENTS REVISIONS OR NEW DIMENSIONS. 5. REPRESENTS CRITICAL AREAS TO BE MEASURED. ALL OTHER DIMENSIONS ARE FOR REFERANCE. 6. THE MOULD NUMBER: NO 7. TEXTURE NUMBER: NO 8. ALL SUBSTANCE NEED TO MEET THE ROHS / REACH REQUIREMENTS. DETAILS REFER TO ZYLUX'S PROCEDURE "QMI-P40-01". 9. WILL USE ±0.05MM INNER DIAMETER FOR THE SCREW WHICH NOT SPECIFIED THE DETAILED DIMENSION. 65.00 55.00 -0.5 +0.5 -0.5 +0.5 Pantone Cool Gray 8C 200#合成纸+光膜 +背壓克力膠 This device compl ies with Part 15 of the FCC Rul es. Operation is subject to the fol lowing two conditions : (1) thi s de vice may not caus e harmful i nt erferenc e, and (2) thi s device mus t accept any int erferenc e received, i nc luding int erferenc e that may caus e undesired operation. CAN ICES-3 (B)/NMB-3(B) Product Name (品名/品名): Flic ks Portable Projector / 便携式投影机 Model (型號/型号): BK01DW45AW FCC ID: XN6-BKDW45 IC:8…

Text truncated - open the document above for the full version.

Internal Photos Note: BK02DW45AW, BK02DW45AK, BK02DW45AG, BK02DW45AS, BK02DW45AR “W”is White;“K”is Black;“G”is Gray;“S”is Sliver;“R”is Red, They represent different colors. BK02DW45A* series’ EUT are equipped with two battery. The battery capacity is 15600mAH and 10400mAH respectively. The other circuits are all the same. Note: BK01DW45AW, BK01DW45AK, BK01DW45AG, BK01DW45AS, BK01DW45AR “W”is White;“K”is Black;“G”is Gray;“S”is Sliver;“R”is Red, They represent different colors. BK01DW45A* series’ EUT only equipped with a battery. The battery capacity is 13000mAH. The other circuits are all the same.

FCC ID : XN6-BKDW45 1. RF EXPOSURE 1.1. The Requirement System operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission’s guidelines. See Section 15.247(b)(4) and Section 1.1307(b)(1) 1.2. Limit For Maximum Permissible Exposure (MPE) Limits for General Population/ Uncontrolled Exposure F = frequency in MHz, * Plane-wave equivalent power density 1.3. MPE Calculation Method Predication of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) ( 2 mW/cm) Averaging Time 2 E, 2 H or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 f/1500 30 1500-100,000 1.0 30 From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the antenna is 0 dBi, the RF power density can be obtained. 1.4. TEST RESULTS Maximum measured transmitter power For BT 4.0 LE GFSK mode Test Frequency （MHz） Minimum Separation Distance (cm) Output Power (dBm) Output Power (mW) Target power (dBm) Antenna Gain (Numeric) Power Density Limit (mW/cm 2 ) Power Density At 20 cm (mW/cm 2 ) Test Results 2402 20.00 -1.46 0.714 -1 ±1 1.000 1.000 0.0002 Pass 2440 20.00 -0.47 0.897 0 ±1 1.000 1.000 0.0003 Pass 2480 20.00 -2.14 0.611 -2 ±1 1.000 1.000 0.0002 Pass For BT 2.1+EDR GFSK mode Test Frequency （MHz） Minimum Separation Distance (cm) Output Power (dBm) Output Power (mW) Target power (dBm) Antenna Gain (Numeric) Power Density Limit (mW/cm 2 ) Power Density At 20 cm (mW/cm 2 ) Test Results 2402 20.00 2.22 1.667 2 ±1 1.000 1.000 0.0004 Pass 2441 20.00 2.85 1.928 2 ±1 1.000 1.000 0.0004 Pass 2480 20.00 1.71 1.483 2 ±1 1.000 1.000 0.0004 Pass ∏/4-DQPSK Mode Test Frequency （MHz） Minimum Separation Distance (cm) Output Power (dBm) Output Power (mW) Target power (dBm) Antenna Gain (Numeric) Power Density Limit (mW/cm 2 ) Power Density At 20 cm (mW/cm 2 ) Test Results 2402 20.00 0.32 1.076 0±1 1.000 1.000 0.0003 Pass 2441 20.00 1.72 1.486 1±1 1.000 1.000 0.0003 Pass 2480 20.00 -0.20 0.955 0±1 1.000 1.000 0.0003 Pass 8DPSK Mode Test Frequency （MHz） Minimum Separation Distance (cm) Output Power (dBm) Output Power (mW) Target power (dBm) Antenna Gain (Numeric) Power Density Limit (mW/cm 2 ) Power Density At 20 cm (mW/cm 2 ) Test Results 2402 20.00 0.70 1.175 0±1 1.000 1.000 0.0003 Pass 2441 20.00 1.42 1.387 1±1 1.000 1.000 0.0003 Pass 2480 20.00 0.13 1.030 0±1 1.000 1.000 0.0003 Pass The measurement results comply with the FCC Limit per 47 CFR 2.1091 for the uncontrolled RF Exposure. 1.5. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, Human proximity to the antenna shall not be less than 20cm(8 inches) during normal operation. Proposed RF exposure safety information to include in User’s Manual.

Report No.: ATE20151667 Page 1 of 69 FCC ID: XN6-BKDW45 ACCURATE TECHNOLOGY CO., LTD APPLICATION CERTIFICATION FCC Part 15C On Behalf of Zylux Acoustic Corporation. Flicks Portable Projector Model No.: BK01DW45A﹡, BK02DW45A﹡, BK03DW45A﹡, BK04DW45A﹡ FCC ID: XN6-BKDW45 Prepared for : Zylux Acoustic Corporation. Address : 3F, 22 Lane 35, Jihu Road, NeiHu Technolongy Park, 114 Taipei Taiwan Prepared by : ACCURATE TECHNOLOGY CO., LTD Address : F1, Bldg. A, Chan Yuan New Material Port, Keyuan Rd. Science & Industry Park, Nan Shan, Shenzhen, Guangdong P.R. China Tel: (0755) 26503290 Fax: (0755) 26503396 Report No. : ATE20151667 Date of Test : July 22-Aug 12, 2015 Date of Report : Aug 12, 2015 Report No.: ATE20151667 Page 2 of 69 FCC ID: XN6-BKDW45 ACCURATE TECHNOLOGY CO., LTD TABLE OF CONTENTS Description Page Test Report Certification 1. GENERAL INFORMATION .......................................................................................................... 5 1.1. Description of Device (EUT) .................................................................................................................... 5 1.2. Carrier Frequency of Channels ................................................................................................................. 6 1.3. Special Accessory and Auxiliary Equipment ........................................................................................... 6 1.4. Description of Test Facility ...................................................................................................................... 7 1.5. Measurement Uncertainty ......................................................................................................................... 7 2. MEASURING DEVICE AND TEST EQUIPMENT ..................................................................... 8 3. OPERATION OF EUT DURING TESTING ................................................................................. 9 3.1. Operating Mode ........................................................................................................................................ 9 3.2. Configuration and peripherals .................................................................................................................. 9 3.3. Sample differences and their testing instructions ................................................................................... 10 4. TEST PROCEDURES AND RESULTS ....................................................................................... 11 5. POWER LINE CONDUCTED MEASUREMENT ..................................................................... 12 5.1. Block Diagram of Test Setup .................................................................................................................. 12 5.2. Power Line Conducted Emission Measurement Limits .......................................................................... 12 5.3. Configuration of EUT on Measurement ................................................................................................. 12 5.4. Operating Condition of EUT .................................................................................................................. 12 5.5. Test Procedure ........................................................................................................................................ 13 5.6. Power Line Conducted Emission Measurement Results ........................................................................ 13 6. 6DB BANDWIDTH MEASUREMENT ........................................................................................ 26 6.1. Block Diagram of Test Setup .................................................................................................................. 26 6.2. The Requirement For Section 15.247(a)(2) ............................................................................................ 26 6.3. EUT Configuration on Measurement ..................................................................................................... 26 6.4. Operating Condition of EUT .................................................................................................................. 26 6.5. Test Procedure ........................................................................................................................................ 26 6.6. Test Result .............................................................................................................................................. 27 7. MAXIMUM PEAK OUTPUT POWER ....................................................................................... 29 7.1. Block Diagram of Test Setup .................................................................................................................. 29 7.2. The Requirement For Section 15.247(b)(3) ............................................................................................ 29 7.3. EUT Configuration on Measurement ..................................................................................................... 29 7.4. Operating Condition of EUT .................................................................................................................. 29 7.5. Test Procedure ........................................................................................................................................ 29 7.6. Test Result .............................................................................................................................................. 30 8. POWER SPECTRAL DENSITY MEASUREMENT .................................................................. 32 8.1. Block Diagram of Test Setup .................................................................................................................. 32 8.2. The Requirement For Section 15.247(e) ................................................................................................. 32 8.3. EUT Configuration on Measure…

Text truncated - open the document above for the full version.

Test Photos