XN6-SR8250HP Roar Plus Wireless Speaker

5 V @ 2 A RMN/型號/型号: HP SR8250 The Bluetooth trademark is owned by its proprietor and used by Hewlett-Packard Company under license. © Copyright 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: May 2014 3 4 5 6 7 1 89- 2 Using the speaker features FeatureDescription 1 Volume up buttonPress to increase the volume. When the maximum volume is reached, the speaker beeps twice. 2 Volume down button Press to decrease the volume. When the mimimum volume is reached, the speaker beeps twice. 3 Forward buttonPress to play the next track. 4 Play buttonPress to play, pause, or resume playback. 5 Back buttonPress to play the previous track. 6 Talk buttonPress to answer or end calls from a phone or phone app paired to the speaker through Bluetooth®. 7 Power button, Bluetooth light, and battery light Press to turn the speaker on and off. If the speaker is charging, the light blinks amber. If the battery is fully charged, the light is off when the speaker is turned off, solid white when the speaker is turned on and paired, and blinking white when the speaker is turned on and pairing. The speaker starts in pairing mode and automatically attempts to connect to previously paired Bluetooth devices. 8 Charging portConnect to a device, such as a cell phone, to charge the device. 9 Micro USB portConnect to a powered USB port to charge the speaker. - Audio-in portConnect to a music device to play music. استخدام ميزات مكبر الصوت الميزةالوصف 1 الصوت رفع زر عند صفيرين الصوت مكبر سيصدر .الصوت مستوى لرفع عليه اضغط .صوت مستوى أعلى إلى الوصول 2 خفض زر الصوت عند صفيرين الصوت مكبر سيصدر .الصوت مستوى لخفض عليه اضغط .صوت مستوى أدنى إلى الوصول 3 الزر للأمام.التالي المسار لتشغيل عليه اضغط 4 التشغيل زر.التشغيل استئناف أو ا ً مؤقت التشغيل إيقاف أو التشغيل لبدء عليه اضغط 5 الزر للخلف.السابق المسار لتشغيل عليه اضغط 6 زر التحدث الهاتف تطبيق أو الهاتف من الاتصالات إنهاء أو على للرد الزر على اضغط . Bluetooth® خلال من الصوت مكبر مع إقرانه تم الذي 7 وضوء الطاقة زر Bluetooth البطارية وضوء اضغط على الزر لتشغيل مكبر الصوت أو إيقاف تشغيله. عندما يتم شحن مكبر الصوت، يومض الضوء بالكهرماني. إذا كانت البطارية عندما يكون مكبر الصوت موقف ً مشحونة بالكامل، يكون الضوء مطفأ التشغيل، ويضيء الضوء بالأبيض الثابت عندما يكون مكبر الصوت قيد التشغيل وتم إقرانه، ويومض الضوء بالأبيض عندما يكون مكبر الصوت قيد التشغيل ويجري الإقران. يتم تشغيل مكبر الصوت في وضع الإقران كما أنه ا. ً التي تم إقرانها سابقBluetoothا الاتصال بأجهزة ً يحاول تلقائي 8 الشحن منفذ.الجهاز لشحن محمول هاتف مثل بجهاز للتوصيل 9 Micro USB منفذ.الصوت مكبر لشحن بالطاقة مزود USB بمنفذ للتوصيل - صوت منفذ داخل .الموسيقى لتشغيل موسيقى بجهاز للتوصيل Използване на функциите на високоговорителя ФункцияОписание 1 Бутон за увеличаване на звука Натиснете, за да увеличите звука. Когато е достигната максималната сила на звука, високоговорителят изписуква два пъти. 2 Бутон за намаляване на звука Натиснете, за да намалите звука. Когато е достигната минималната сила на звука, високоговорителят изписуква два пъти. 3 Бутон за напредНатиснете, за да изпълните следващия запис. 4 Бутон за възпроизвеждане Натиснете, за да пуснете, поставите на пауза или възобновите възпроизвеждането. 5 Бутон за назадНатиснете, за да изпълните предишния запис. 6 Бутон за разговорНатиснете, за да отговорите на повикване или приключите разговор от телефон или приложение на телефон, сдвоени с високоговорителя чрез Bluetooth®. 7 Бутон за захранване, Bluetooth индикатор и индикатор за батерията Натиснете, за да включите или изключите високоговорителя. Ако високоговорителят се зарежда, индикаторът мига в жълто. Ако батерията е напълно заредена, индикаторът е изключен, когато високоговорителят е изключен, в непрекъснато бяло, когато високоговорителят е включен или сдвоен, и мига в бяло, когато високоговорителят е включен и се сдвоява. Високоговорителят се стартира в режим на сдвояване и автоматично опитва да се свърже към преди това сдвоени Bluetooth устройства. 8 Порт за зарежданеСвържете към устройство, като например мобилен телефон, за да заредите устройството. 9 Micro USB портСвържете към захранващ USB порт, за да заредите високоговорителя. - Порт за аудиовходСлужи за свързване към музикални устройства за възпроизвеждане на музика. Použití funkcí reproduktoru FunkcePopis 1 Tlačítko zvýšení hlasitosti Stisknutím zvýšíte hlasitost. Po dosažení maximální hlasitosti reproduktor dvakrát pípne. 2 Tlačítko snížení hlasitosti Stisknutím snížíte hlasitost. Po dosažení minimální hlasitosti reproduktor dvakrát pípne. 3 Tlačítko pro posun vpřed Stisknutím spusťte přehrávání další stopy. 4 Tlačítko přehrávání Stisknutím spustíte přehrávání, pozastavení přehrávání nebo pokračování přehrávání. 5 Tlačítko zpětStisknutím spusťte přehrávání předchozí stopy. 6 Tlačítko hovoruStiskněte pro přijetí nebo ukončení hovoru z telefonu nebo telefonní aplikace spárované s reproduktorem pomocí technologie Bluetooth®. 7 Tlačítko napájení, kontrolka Bluetooth a kontrolka baterie Stiskněte pro zapnutí a vypnutí reproduktoru. Pokud se reproduktor nabíjí, kontrolka bliká oranžově. Pokud je baterie zcela nabitá, po vypnutí reproduktoru kontrolka zhasne, po zapnutí, je-li reproduktor zapnut a spárován, svítí bíle, a bliká, pokud je reproduktor zapnut a probíhá párování. Reproduktor se spustí v režimu párování a automaticky se pokouší připojit ke dříve spárovaným zařízením Bluetooth. 8 Nabíjecí portPokud chcete zařízení, jako je mobilní telefon, nabíjet, připojte jej. 9 Port Micro USBPokud chcete reproduktor nabíjet, připojte jej k napájenému portu USB. - Port vstupu zvuku Pokud chcete přehrávat hudbu, připojte zařízení s hudbou. Brug af højtalerfunktioner FunktionBeskrivelse 1 Knappen Lydst…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (current) 2.0 3.0 Jan-31-2012 Updated letter information (current) 3.0 4.0 May-23-2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 3.0 Zylux Acoustic Corporation 3F, 22, Lane 35, Jihu Road, Neihu Technology Park, Taipei 11492, Taiwan 2014/07/05 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, __ Zylux Acoustic Corporation hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): Product description: HP Roar Plus Wireless Speaker Model name: HP SR8250 FCC ID: XN6-SR8250 We affirm that between SIEMIC and __ Zylux Acoustic Corporation _ , any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Client’s signature : Client’s name / title : Percy.lee / Project Manager Contact information / address: 3F, 22, Lane 35, Jihu Road, Neihu Technology Park, Taipei 11492, Taiwan

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 3.0 Zylux Acoustic Corporation 3F, 22, Lane 35, Jihu Road, Neihu Technology Park, Taipei 11492, Taiwan 2014/07/05 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: XN6-SR8250 We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature : Client’s name / title : Percy.lee / Project Manager Contact information / address: 3F, 22, Lane 35, Jihu Road, Neihu Technology Park, Taipei 11492, Taiwan

External Photos M/N: HP SR8250 External Photos M/N: HP SR8250 External Photos M/N: HP SR8250

22*34 mm

Label Location

Internal Photos M/N: HP SR8250 Internal Photos M/N: HP SR8250 Internal Photos M/N: HP SR8250 Internal Photos M/N: HP SR8250 Bluetooth Antenna Internal Photos M/N: HP SR8250 Internal Photos M/N: HP SR8250

FCC ID: XN6-SR8250 FCC PART 15C TEST REPORT FOR CERTIFICATION On Behalf of Zylux Acoustic Corporation. HP Roar Plus Wireless Speaker Model Number: HP SR8250 FCC ID: XN6-SR8250 Prepared for : Zylux Acoustic Corporation. 3F, 22Lane 35, Jihu Road, Neihu Technology Park, Taipei, 114 Taiwan Prepared By : EST Technology Co., Ltd. Santun(guantai Road), Houjie Town, DongGuan City, GuangDong, China. Tel: 86-769-83081888-808 Report Number: ESTE-R1406009 Date of Test : June 03 ~ June 17, 2014 Date of Report : June 25, 2014 FCC ID: 1. EXPOSURE EVALUATION OF PORTABLE OR MOBILE DEVICES Human exposure to RF emissions from portable devices (47 CFR §2.1093), as defined by the FCC, must be evaluated with respect to the FCC-adopted limits for SAR. Evaluation of mobile devices, as defined by the FCC, may also be performed with respect to SAR limits, but in such cases it is usually simpler and more cost-effective to evaluate compliance with respect to field strength or power density limits. For certain devices that are designed to be used in both mobile and portable configurations similar to those described in 47 CFR §2.1091(d)(4), such as certain desktop phones and wireless modem modules, compliance for mobile configurations is also satisfied when the same device is evaluated for SAR compliance in portable configurations. 2．SAR TEST EXCLUSION THRESHOLD FOR 100MHz to 6GHz and ≤50mm The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where •f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. FCC ID: 3. EVALUATION RESULTS Maximum measured transmitter power. Mode CH Peak output Power （dBm） Peak output Power （mW） Results 2402 1.87 1.538 0.477 2440 2.57 1.807 0.565 GFSK 2480 2.45 1.758 0.554 [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] * [√f(GHz)] < 3.0 SAR Test Exclusion Thresholds is 3.0 for separation distance 5mm. Therefore, SAR test is not required. ====END====

FCC ID: XN6-SR8250 EST Technology Co.,Ltd Report No.ESTE-R1406037 Page 1 of 70 FCC PART 15C TEST REPORT FOR CERTIFICATION On Behalf of Zylux Acoustic Corporation. HP Roar Plus Wireless Speaker Model Number: HP SR8250 FCC ID: XN6-SR8250 Prepared for : Zylux Acoustic Corporation. 3F, 22Lane 35, Jihu Road, Neihu Technology Park, Taipei, 114 Taiwan Prepared By : EST Technology Co., Ltd. Santun(guantai Road), Houjie Town, DongGuan City, GuangDong, China. Tel: 86-769-83081888-808 Report Number: ESTE-R1406037 Date of Test : June 03 ~ June 19, 2014 Date of Report : June 25, 2014 FCC ID: XN6-SR8250 EST Technology Co.,Ltd Report No.ESTE-R1406037 Page 2 of 70 TABLE OF CONTENTS Description Page TEST REPORT VERIFICATION.........................................................................................................................3 1. GENERAL INFORMATION.................................................................................................................5 1.1. Description of Device (EUT) ........................................................................................................... 5 2. SUMMARY OF TEST.........................................................................................................................6 2.1. Summary of test result...................................................................................................................... 6 2.2. Test Facilities ................................................................................................................................... 7 2.3. Assistant equipment used for test ..................................................................................................... 8 2.4. Block Diagram ................................................................................................................................. 8 2.5. Test mode ......................................................................................................................................... 9 2.6. Channel List for Bluetooth ............................................................................................................... 9 2.7. Test Equipment............................................................................................................................... 10 3 POWER LINE CONDUCTED EMISSION TEST........................................................................................11 3.1. Limit................................................................................................................................................... 11 3.2. Block Diagram of Test Setup ......................................................................................................... 11 3.3 Test Procedure ................................................................................................................................ 11 3.4. Test Result ...................................................................................................................................... 11 3.5. Test data ......................................................................................................................................... 12 4 RADIATED EMISSION TEST................................................................................................................14 4.1 Limit.................................................................................................................................................... 14 4.2. Test Procedure ................................................................................................................................ 15 4.3 Block Diagram of Test setup .......................................................................................................... 15 4.4 Test Result ...................................................................................................................................... 15 4.5 Test Data ........................................................................................................................................ 16 5 CONDUCTED SPURIOUS EMISSION.................................................................................................35 5.1 Limit ............................................................................................................................................... 35 5.2 Test Procedure ................................................................................................................................ 35 5.3 Test Result ...................................................................................................................................... 35 5.4 Test Data ........................................................................................................................................ 36 6 BAND EDGE COMPLIANCE TEST...................................................................................................42 6.1 Limit ............................................................................................................................................... 42 6.2 Test Procedure ................................................................................................................................ 42 6.3 Test Result ...................................................................................................................................... 42 6.4 Test Data ........................................................................................................................................ 43 7 6dB Bandwidth Test.....................................................................................................................47 7.1 Limit ............................................................................................................................................... 47 7.2 Test Procedure ............................................................................................…

Text truncated - open the document above for the full version.

Conducted Test Radiated Test (30-1000 MHz) Radiated Test (1000-25000 MHz)