XR3-POKE4E Ink Tablet, Smart E Ink Tablet, ePaper Tablet, E-bag Tablet, E-book Tablet, E-reader Tablet, Eyes protection E Ink Tablet, E-paper Tablet, Color E Ink Tablet, Color ePaper Tablet

ONYX INTERNATIONAL INC. Room 301-6, 10 Honglou Street, Liwan District, Guangzhou City, Guangdong Province, China Tel: (86)0755-86966884 Fax: (86)0755-86966884 Email: [email protected] Attestation Letter Date: 2022-05-24 To: FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 The Main chip, model: QCS2290 installed in our product E Ink Tablet, Smart E Ink Tablet, ePaper Tablet, E-bag Tablet, E-book Tablet, E-reader Tablet, Eyes protection E Ink Tablet, E-paper Tablet, Color E Ink Tablet, Color ePaper Tablet, model: Poke4 Plus, FCC ID: XR3-POKE4,this chip supports BT/BLE1M&2M/2.4G&5GWi-Fi function, but for marketing purpose, this chip only supports BT/BLE1M,2.4G&5GWi-Fi band (5150-5250MHz，5725-5850MHz).The BLE2M and the other 5GWi-Fi band was disabled to use by manufacture in the software, the end user has no capability to activate it. Signature: Lifen Yu R&D Assistant

Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220330-11570E-RF External Photos Page 1 of 3 External Photos Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220330-11570E-RF External Photos Page 2 of 3 Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220330-11570E-RF External Photos Page 3 of 3

Step: Settings (Product Information)- About the device – Certification Information

Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220330-11570E-RF Internal Photos Page 1 of 5 Internal photos Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220330-11570E-RF Internal Photos Page 2 of 5 Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220330-11570E-RF Internal Photos Page 3 of 5 Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220330-11570E-RF Internal Photos Page 4 of 5 Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220330-11570E-RF Internal Photos Page 5 of 5 Antenna

Note: This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “★”. Shenzhen Accurate Technology Co., Ltd. is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. Shenzhen Accurate Technology Co., Ltd. 1/F., Building A, Changyuan New Material Port, Science & Industry Park, Nanshan District, Shenzhen, Guangdong, P.R. China Tel: +86 755-26503290 Fax: +86 755-26503396 Web: www.atc-lab.com Version 801: 2021-11-09 Page 1 of 39 FCC SAR TEST REPORT Applicant Name : ONYX INTERNATIONAL INC. Address : Room 301-6, 10 Honglou Street, Liwan District, Guangzhou City, Guangdong Province, China Report Number : SZNS220330-11570E-SA FCC ID: XR3-POKE4 Test Standard (s) FCC Part 2.1093 Sample Description Product Type: E Ink Tablet, Smart E Ink Tablet, ePaper Tablet, E-bag Tablet, E-book Tablet, E-reader Tablet, Eyes protection E Ink Tablet, E-paper Tablet, Color E Ink Tablet, Color ePaper Tablet Model No.: Poke4 Plus Multiple Model(s) No.: Poke4 Lite, Poke4 Pro, Poke4 Color, Poke4, Poke4S (Please refer to DOS for Model difference) Trade Mark: BOOX Date Received: 2022/03/30 Report Date: 2022/06/01 Test Result: Pass* * In the configuration tested, the EUT complied with the standards above. Prepared and Checked By: Approved By: Lance Li Candy Li EMC Engineer EMC Engineer Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Version 801: 2021-11-09 Page 2 of 39 FCC SAR Attestation of Test Results MODE Max. SAR Level(s) Reported(W/kg) Limit (W/kg) WLAN 2.4G 1g Body SAR 0.58 1.6 WLAN 5.2G 1g Body SAR 1.42 WLAN 5.8G 1g Body SAR 1.35 Applicable Standards FCC 47 CFR part 2.1093 Radiofrequency radiation exposure evaluation: portable devices RF Exposure Procedures: TCB Workshop April 2019 IEEE1528:2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques IEC 62209-1:2016 Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz) KDB procedures KDB 447498 D01 General RF Exposure Guidance v06 KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r04 KDB 865664 D02 RF Exposure Reporting v01r02 KDB 941225 D07 UMPC Mini Tablet v01r02 KDB 248227 D01 802 11 Wi-Fi SAR v02r02 Note: This wireless device has been shown to be capable of compliance for localized specific absorption rate (SAR) for General Population/Uncontrolled Exposure limits specified in FCC 47 CFR part 2.1093 and has been tested in accordance with the measurement procedures specified in IEEE 1528-2013 and RF exposure KDB procedures. The results and statements contained in this report pertain only to the device(s) evaluated. Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Version 801: 2021-11-09 Page 3 of 39 FCC SAR TABLE OF CONTENTS DOCUMENT REVISION HISTORY ......................................................................................................................... 4 EUT DESCRIPTION ................................................................................................................................................... 5 TECHNICAL SPECIFICATION ............................................................................................................................................. 5 REFERENCE, STANDARDS, AND GUIDELINES ................................................................................................. 6 SAR LIMITS ..................................................................................................................................................................... 7 FACILITIES ................................................................................................................................................................. 8 DESCRIPTION OF TEST SYSTEM .......................................................................................................................... 9 EQUIPMENT LIST AND CALIBRATION ............................................................................................................. 15 EQUIPMENTS LIST & CALIBRATION INFORMATION ........................................................................................................ 15 SAR MEASUREMENT SYSTEM VERIFICATION ............................................................................................. 16 LIQUID VERIFICATION ................................................................................................................................................... 16 SYSTEM ACCURACY VERIFICATION ............................................................................................................................... 17 SAR SYSTEM VALIDATION DATA ......................................................................................................................... 18 EUT TEST STRATEGY AND METHODOLOGY ................................................................................................. 21 TEST POSITIONS FOR BODY-WORN AND OTHER CONFIGURATIONS .................................................................................. 21 TEST DISTANCE FOR SAR EVALUATION ..................................................................................................…

Text truncated - open the document above for the full version.

Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 1 of 36 APPENDIX C PROBE CALIBRATION CERTIFICATES Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 2 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 3 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 4 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 5 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 6 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 7 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 8 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 9 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 10 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 11 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 12 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 13 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 14 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 15 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 16 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 17 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 18 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 19 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 20 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 21 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 22 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 23 of 36 APPENDIX D DIPOLE CALIBRATION CERTIFICATES Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 24 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 25 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 26 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 27 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 28 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 29 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 30 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 31 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 32 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 33 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 34 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 35 of 36 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 36 of 36

Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 1 of 16 Plot 1#: WLAN 2.4G_Body Front_Mid DUT: Poke4 Plus; Type: E Ink Tablet; Serial: SZNS220330-11570E-SA-S1 Communication System: UID 0, 2.4G DTS (0); Frequency: 2437 MHz;Duty Cycle: 1:1.01 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.815 S/m; ε r = 40.005; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: EX3DV4 - SN3619; ConvF(6.69, 6.69, 6.69) @ 2437 MHz; • Sensor-Surface: 4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1211; Calibrated: 2022/03/01 • Phantom: Twin SAM; Type: QD000P40CD; Serial: 1744 • Measurement SW: DASY52, Version 52.10 (2); Body Front/WLAN 802.11b Mid/Area Scan (121x101x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.443 W/kg Body Front/WLAN 802.11b Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.167 V/m; Power Drift = 0.12 dB Peak SAR (extrapolated) = 1.05 W/kg SAR(1 g) = 0.339 W/kg; SAR(10 g) = 0.143 W/kg Maximum value of SAR (measured) = 0.357 W/kg 0 dB = 0.357 W/kg = -4.47 dBW/kg Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 2 of 16 Plot 2#: WLAN 2.4G_Body Back_Mid DUT: Poke4 Plus; Type: E Ink Tablet; Serial: SZNS220330-11570E-SA-S1 Communication System: UID 0, 2.4G DTS (0); Frequency: 2437 MHz;Duty Cycle: 1:1.01 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.815 S/m; ε r = 40.005; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: EX3DV4 - SN3619; ConvF(6.69, 6.69, 6.69) @ 2437 MHz; • Sensor-Surface: 4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1211; Calibrated: 2022/03/01 • Phantom: Twin SAM; Type: QD000P40CD; Serial: 1744 • Measurement SW: DASY52, Version 52.10 (2); Body Back/WLAN 802.11b Mid/Area Scan (121x101x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.548 W/kg Body Back/WLAN 802.11b Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.190 V/m; Power Drift = 0.13 dB Peak SAR (extrapolated) = 1.05 W/kg SAR(1 g) = 0.476 W/kg; SAR(10 g) = 0.199 W/kg Maximum value of SAR (measured) = 0.565 W/kg 0 dB = 0.565 W/kg = -2.48 dBW/kg Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 3 of 16 Plot 3#: WLAN 2.4G_Body Left_Mid DUT: Poke4 Plus; Type: E Ink Tablet; Serial: SZNS220330-11570E-SA-S1 Communication System: UID 0, 2.4G DTS (0); Frequency: 2437 MHz;Duty Cycle: 1:1.01 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.815 S/m; ε r = 40.005; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: EX3DV4 - SN3619; ConvF(6.69, 6.69, 6.69) @ 2437 MHz; • Sensor-Surface: 4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1211; Calibrated: 2022/03/01 • Phantom: Twin SAM; Type: QD000P40CD; Serial: 1744 • Measurement SW: DASY52, Version 52.10 (2); Body Left/WLAN 802.11b Mid/Area Scan (81x101x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.165 W/kg Body Left/WLAN 802.11b Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 9.437 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 0.295 W/kg SAR(1 g) = 0.143 W/kg; SAR(10 g) = 0.066 W/kg Maximum value of SAR (measured) = 0.166 W/kg 0 dB = 0.166 W/kg = -7.80 dBW/kg Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 4 of 16 Plot 4#: WLAN 2.4G_Body Bottom_Mid DUT: Poke4 Plus; Type: E Ink Tablet; Serial: SZNS220330-11570E-SA-S1 Communication System: UID 0, 2.4G DTS (0); Frequency: 2437 MHz;Duty Cycle: 1:1.01 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.815 S/m; ε r = 40.005; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: EX3DV4 - SN3619; ConvF(6.69, 6.69, 6.69) @ 2437 MHz; • Sensor-Surface: 4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1211; Calibrated: 2022/03/01 • Phantom: Twin SAM; Type: QD000P40CD; Serial: 1744 • Measurement SW: DASY52, Version 52.10 (2); Body Bottom/WLAN 802.11b Mid/Area Scan (81x101x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.160 W/kg Body Bottom/WLAN 802.11b Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.094 V/m; Power Drift = 0.15 dB Peak SAR (extrapolated) = 0.276 W/kg SAR(1 g) = 0.131 W/kg; SAR(10 g) = 0.058 W/kg Maximum value of SAR (measured) = 0.152 W/kg 0 dB = 0.152 W/kg = -8.18 dBW/kg Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 5 of 16 Plot 5#: WLAN 5.2G_Body Front_Low DUT: Poke4 Plus; Type: E Ink Tablet; Serial: SZNS220330-11570E-SA-S1 Communication System: UID 0, 5.2G WiFi (0); Frequency: 5180 MHz;Duty Cycle: 1:1.02 Medium parameters used (interpolated): f = 5180 MHz; σ = 4.703 S/m; ε r = 37.096; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: EX3DV4 - SN3619; ConvF(4.37, 4.37, 4.37) @ 5180 MHz; • Sensor-Surface: 2mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1211; Calibrated: 2022/03/01 • Phantom: Twin SAM; Type: QD000P40CD; Serial: 1744 • Measurement SW: DASY52, Version 52.10 (2); Body Front/WLAN 5.2G 802.11a Low/Area Scan (111x101x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 2.69 W/kg Body Front/WLAN 5.2G 802.11a Low/Zoom Scan (8x8x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 0.7580 V/m; Power Drift = 0.20 dB Peak SAR (extrapolated) = 5.86 W/kg SAR(1 g) = 1.11 W/kg; SAR(10 g) = 0.293 W/kg Maximum value of SAR (measured) = 2.64 W/kg 0 dB = 2.64 W/kg = 4.22 dBW/kg Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 6 of 16 Plot 6#: WLAN 5.2G_Body Front_Mid DUT: Poke4 Plus; Type: E Ink Tablet; Serial: SZNS220330-11570E-SA-S1 Communication System: UID 0, 5.2G WiFi (0); Frequency: 5200 MHz;Duty Cycle: 1:1.02 Medium parameters used: f = 5200 MHz; σ = 4.725 S/m; ε r = 37.01…

Text truncated - open the document above for the full version.

Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 1 of 3 APPENDIX B EUT TEST POSITION PHOTOS Liquid depth ≥ 15cm Phantom Type: Twin SAM Phantom ; Type: QD000 P40 CD; Serial: TP:1744 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 2 of 3 Body Front Setup Photo (0mm) Body Back Setup Photo (0mm) Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-SA Page 3 of 3 Body Left Setup Photo (0mm) Body Bottom Setup Photo (0mm)

★ Note: This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “ ”. Shenzhen Accurate Technology Co., Ltd. is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. Shenzhen Accurate Technology Co., Ltd. 1/F., Building A, Changyuan New Material Port, Science & Industry Park, Nanshan District, Shenzhen, Guangdong, P.R. China Tel: +86 755-26503290 Fax: +86 755-26503396 Web: www.atc-lab.com Version 12: 2021-11-09 Page 1 of 66 FCC- BLE&2.4G Wi-Fi TEST REPORT Applicant Name : ONYX INTERNATIONAL INC. Address : Room 301-6, 10 Honglou Street, Liwan District, Guangzhou City, Guangdong Province, China Report Number : SZNS220330-11570E-RF-00B FCC ID: XR3-POKE4 Test Standard (s) FCC PART 15.247 Sample Description Product Type: E Ink Tablet, Smart E Ink Tablet, ePaper Tablet, E-bag Tablet, E-book Tablet, E-reader Tablet, Eyes protection E Ink Tablet, E-paper Tablet, Color E Ink Tablet, Color ePaper Tablet Model No.: Poke4 Plus Multiple Model(s) No.: Poke4 Lite, Poke4 Pro, Poke4 Color, Poke4, Poke4S (Please refer to DOS for Model difference) Trade Mark: BOOX Date Received: 2022/03/30 Report Date: 2022/05/30 Test Result: Pass* * In the configuration tested, the EUT complied with the standards above. Prepared and Checked By: Approved By: Black Ding Robert Li EMC Engineer EMC Engineer Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220330-11570E-RF-00B Version 12: 2021-11-09 Page 2 of 66 FCC- BLE&2.4G Wi-Fi TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 TEST METHODOLOGY .................................................................................................................................................. 4 MEASUREMENT UNCERTAINTY .................................................................................................................................... 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 7 EUT EXERCISE SOFTWARE .......................................................................................................................................... 7 DUTY CYCLE ................................................................................................................................................................ 7 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 7 EXTERNAL I/O CABLE .................................................................................................................................................. 7 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 8 SUMMARY OF TEST RESULTS ............................................................................................................................... 9 TEST EQUIPMENT LIST ......................................................................................................................................... 10 FCC§15.247 (I), §1.1307 (B) (1) & §2.1093 – RF EXPOSURE .................................................................................... 12 APPLICABLE STANDARD ............................................................................................................................................ 12 FCC §15.203 - ANTENNA REQUIREMENT ........................................................................................................... 13 APPLICABLE STANDARD ............................................................................................................................................ 13 ANTENNA CONNECTOR CONSTRUCTION .................................................................................................................... 13 FCC §15.207 (A) – AC LINE CONDUCTED EMISSIONS .................................................................................... 14 APPLICABLE STANDARD ............................................................................................................................................ 14 EUT SETUP ................................................................................................................................................................ 14 EMI TEST RECEIVER SETUP ....................................................................................................................................... 14 TEST PROCEDURE ......................................................................................................................................................…

Text truncated - open the document above for the full version.

Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220330-11570E-RF Test Photos Page 1 of 2 Photo of Conducted Emission Measurement Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220330-11570E-RF Test Photos Page 2 of 2 Photo of Radiated Emission Measurement (Below 1GHz) Photo of Radiated Emission Measurement (Above 1GHz)