XRSCRMXCORE1012.4G Wireless Control Module

      CONFIDENTIALITY NOTE CONFIDENTIALITY NOTECONFIDENTIALITY NOTE CONFIDENTIALITY NOTE                          !ဆငင$စဓငစ Revision: PA6 – Jan 28, 2015 - 2 (18) - Table of Contents Table of ContentsTable of Contents Table of Contents ................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ .................................. .... .. 1 11 1 ABSOLUTE MAXIMUM RATINGS ABSOLUTE MAXIMUM RATINGSABSOLUTE MAXIMUM RATINGS ABSOLUTE MAXIMUM RATINGS ................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ ...................................... ............ ...... 3 33 3 Reco RecoReco Recommended operating conditions mmended operating conditionsmmended operating conditions mmended operating conditions ................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ ........................................................... ...................................................... ........................... 3 33 3 Electrical characteristics Electrical characteristicsElectrical characteristics Electrical characteristics................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ .................................................... ........................................ .................... 3 33 3 General characteristics General characteristicsGeneral characteristics General characteristics ................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ ...................................................... ............................................ ...................... 4 44 4 RF characteristics RF characteristicsRF characteristics RF characteristics ................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................ 4 44 4 ADC characteristics ADC characteristicsADC characteristics ADC characteristics ................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ ............................................................. .......................................................... ............................. 4 44 4 Control input AC characteristics Control input AC characteristicsControl input AC characteristics Control input AC characteristics................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ ................................................................ ..................................... .......... ..... 5 …

Text truncated - open the document above for the full version.

integral antenna and external antenna with unique connection port

Project No.: 1412C254 Page 2 of 6 Project No.: 1412C254 Page 5 of 6 Project No.: 1412C254 Page 6 of 6

FCC ID : XRSCRMXCORE101 CRMX CORE Model: 200-1901 IC : 8879A-CRMXC101

Project No.: 1412C254 Page 3 of 6 Project No.: 1412C254 Page 4 of 6 Project No.: 1412C254 Page 5 of 6

FCC RF EXPOSURE REPORT FCC ID: XRSCRMXCORE101 Project No. : 1412C254 Equipment : 2.4G Wireless Control Module Model : 200-1901 Applicant : LumenRadio AB Address : Stena Center 1, Gothenburg, Sweden According: : FCC Guidelines for Human Exposure IEEE C95.1 BTL INC. No.3, Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, China. TEL: +86-769-8318-3000 FAX: +86-769-8319-6000 MPE CALCULATION METHOD: Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Table for Filed Antenna Ant. BrandModel NameAntenna TypeConnector Gain(dBi) Note 1 N/A 104-1001 Dipole N/A 2.15 2 N/A N/A Internal N/A 0.5 TEST RESULTS EUT： CRMX CORE Model Name : 200-1901 Temperature： 25 °C Relative Humidity: 55 % Test Voltage : AC 120V/60Hz Test Mode ： 1Mbps_CH11/19/26 Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 2.15 1.6406 14.11 25.7632 0.008412991 Complies 2.15 1.6406 14.12 25.8226 0.008432381 Complies Note: the calculated distance is 20 cm.

Report No.:BTL-FCCP-1-1412C254 FCC Radio Test FCC ID: This report concerns (check one): Project No. : 1412C254 Equipment : 2.4G Wireless Control Module Model Name : 200 Applicant : LumenRadio AB Address : Svangatan 2B, SE Date of Receipt : Dec. 30, 2014 Date of Test : Dec. 30, 2014 ~ Issued Date : Mar. 05, 2015 Tested by : BTL Inc. Testing Engineer Technical Manager Authorized Signatory BTL No.3, Jinshagang 1st Road, Shi Guangdong, TEL: +86-769-8318 FCC Radio Test Report FCC ID: XRSCRMXCORE101 This report concerns (check one): Original Grant Class II Change 1412C254 2.4G Wireless Control Module 200-1901 LumenRadio AB Svangatan 2B, SE-41668 Gothenburg, Sweden Dec. 30, 2014 Dec. 30, 2014 ~ Mar. 04, 2015 Mar. 05, 2015 BTL Inc. : (David Mao) : (Leo Hung) : (Steven Lu) BTL INC. Jinshagang 1st Road, Shixia, Dalang Town, Dong Guangdong, China. 8318-3000 FAX: +86-769-8319-6000 Page 1 of 92 Class II Change Dalang Town, Dongguan, 6000 Report No.:BTL-FCCP-1-1412C254 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL BTL’s reports must not be used by the client to claim product endorsement by the authoritie agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and BTL-self, extracts from the test report shall not be reproduced except in full with approval. BTL’s laboratory quality assurance procedures are in compliance with the and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement , or National Institute of Standards and Technology (NIST) of 's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical shall have no liability for any declarations, inferences or generalizations BTL issued reports. ’s reports must not be used by the client to claim product endorsement by the authoritie This report is the confidential property of the client. As a mutual protection to the clients, the public and , extracts from the test report shall not be reproduced except in full with BTL’s authorized written ’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 and accredited by the conformity assessment authorities listed in this test report. limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Page 2 of 92 represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement ) of U.S.A. 's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and shall have no liability for any declarations, inferences or generalizations ’s reports must not be used by the client to claim product endorsement by the authorities or any This report is the confidential property of the client. As a mutual protection to the clients, the public and ’s authorized written 17025 requirements, limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Report No.:BTL-FCCP-1-1412C254 Table of Contents 1 . CERTIFICATION 2 . SUMMARY OF TEST RESULTS 2.1 TEST FACILITY 2.2 MEASUREMENT UNCERTAINTY 3 . GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT 3.2 DESCRIPTION OF TEST MODES 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE 3.4 BLOCK DIAGRAM SHOWING THE CON 3.5 DESCRIPTION OF SUPPORT UNITS 4 . EMC EMISSION TEST 4.1 CONDUCTED EMISSION MEASUREMENT 4.1.1 POWER LINE CONDUCTED EMISSION LIMI 4.1.2 TEST PROCEDURE 4.1.3 DEVIATION FROM TEST STANDARD 4.1.4 TEST SETUP 4.1.5 EUT OPERATING CONDITIONS 4.1.6 EUT TEST CONDITIONS 4.1.7 TEST RESULTS 4.2 RADIATED EMISSION MEASUREMENT 4.2.1 RADIATED EMISSION LIMITS 4.2.2 TEST PROCEDURE 4.2.3 DEVIATION FROM TEST STANDAR 4.2.4 TEST SETUP 4.2.5 EUT OPERATING CONDITIONS 4.2.6 EUT TEST CONDITIONS 4.2.7 TEST RESULTS (9KHZ TO 4.2.8 TEST RESULTS (BETWEEN 30 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 5 . BANDWIDTH TEST 5.1 APPLIED PROCEDURES 5.1.1 TEST PROCEDURE 5.1.2 DEVIATION FROM STANDARD 5.1.3 TEST SETUP 5.1.4 EUT OPERATION CONDITIONS 5.1.5 EUT TEST CONDITIONS 5.1.6 TEST RESULTS 6 . MAXIMUM PEAK CONDUCTED Table of Contents SULTS RTAINTY ION OF EUT EST MODES ERS OF TEXT SOFTWARE SETTING GRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED UPPORT UNITS EMISSION MEASUREMENT DUCTED EMISSION LIMITS TEST STANDARD ONDITIONS TIONS N MEASUREMENT ION LIMITS TEST STANDARD CONDITIONS TIONS HZ TO 30MHZ) BETWEEN 30MHZ TO 1000 MHZ) ABOVE 1000 MHZ) STANDARD CONDITIONS CONDITIONS PEAK CONDUCTED OUTPUT POWER TEST Page 3 of 92 Page 6 7 8 8 9 9 11 11 TESTED 12 12 13 13 13 13 13 14 14 14 14 15 15 16 16 16 17 17…

Text truncated - open the document above for the full version.

Report No.:BTL-FCCP-1-1412C254 10. EUT TEST PHOTO Conduc Conducted Measurement Photos Page 25 of 86 Report No.:BTL-FCCP-1-1412C254 Radiated Measurement Photos Radiated Measurement Photos Radiated Measurement Photos 9KHz to 30MHz Radiated Measurement Photos Page 26 of 86 Report No.:BTL-FCCP-1-1412C254 Radiated Measurement Photos 30MHz to 1000MHz Radiated Measurement Photos Page 27 of 86 Report No.:BTL-FCCP-1-1412C254 Above 1000MHz Page 28 of 86