XVE-SA11201Track and Field Events Timing Transmitter

DTS User Manual Stage Version 1.0 DTS Version: 1.0 User Manual Date: 2/24/2012 9:59:00 AM Confidential © Traxxas 2009 Page 2 of 7 Revision History Date Version Description Author 10/10/2011 1.0 Original. Chris S. Russell DTS Version: 1.0 User Manual Date: 2/24/2012 9:59:00 AM Confidential © Traxxas 2009 Page 3 of 7 Table of Contents 1. INTRODUCTION ............................................................................................................................................... 4 2. USERS GUIDE INFORMATION ...................................................................................................................... 5 2.1 ANTENNA REGULATION ................................................................................................................................. 5 2.2 EMISSIONS COMPLIANCE TESTING ................................................................................................................. 5 2.3 WORKING WITH ADDITIONAL TRANSMITTERS................................................................................................ 5 2.4 PRODUCT LABELING REQUIREMENTS ............................................................................................................. 6 3. FCC RF EXPOSURE STATEMENT ................................................................................................................ 7 DTS Version: 1.0 User Manual Date: 2/24/2012 9:59:00 AM Confidential © Traxxas 2009 Page 4 of 7 1. Introduction The user manual contains information pertaining to output power, operating frequency, operating channels, data rates, tuning range, intended use, general installation instructions, and antenna connector and gain information. . DTS Version: 1.0 User Manual Date: 2/24/2012 9:59:00 AM Confidential © Traxxas 2009 Page 5 of 7 2. Users Guide Information It is required that Traxxas LLP place the text below in the product user guide along with all other pertinent regulatory information. General Conditions: The following conditions must be strictly adhered to for modular approval: 1. No modification to the module including the circuitry is permitted. 2. Design criteria to include antenna, interconnects, and local oscillator. 3. Testing of the final device configuration for Digital Emissions Compliance The Spectrum 2.4 GHz, DTS may not be altered or modified in any manner by the OEM or other entity. Additionally, no component may be added which could change the radio frequency (RF) characteristics. These include, but are not limited to unintentional or spurious emissions, immunity, ESD characteristics, or other items commonly associated with RF devices. This includes all components; passive and active. Additionally, no RF components may be placed between the RF output of the module and the antenna. 2.1 Antenna Regulation The antenna has been selected and specifically tested with the Spectrum 2.4GHz, DTS, and has been certified through the regulatory agencies in the US and European Union authorized use. Use of any other antenna type used with this unit voids the LMA grant for the said module. 2.2 Emissions Compliance Testing Notwithstanding the Modular Approval for the device with associated antenna, the end product configuration must meet digital emissions compliance and must be tested in accordance with FCC Part 15 requirements confirming radiated emissions are within specified limits. Applicable FCC guidelines: • Part 15 Section 15.109 Sub-paragraph A, Class B Radiated Emission Limits. These emission tests can be conducted by the manufacturer or by contacting an approved test facility equipped and certified accordingly. The results of these emissions tests are not required to be submitted to the FCC or Traxxas, but should be kept on file by the OEM. 2.3 Working with Additional Transmitters The DTS should not be operated with any other transmitter in the end product. However, if such an application comes about, further regulatory compliance from the FCC must be obtained. DTS Version: 1.0 User Manual Date: 2/24/2012 9:59:00 AM Confidential © Traxxas 2009 Page 6 of 7 2.4 Product Labeling Requirements FCC product labeling requirements stipulate an FCC label, including specific text, be placed on the device containing the module. The product label must include the following text and must be affixed to the exterior of the final product. The text should be located beneath the FCC compliance logo. This product contains an integrated 2.4GHz (DSSS) radio. FCC ID: XVE-SA11201 In addition to the above text FCC Part 15.21 stipulates that the Digital Electronic Devices manufacturers must also have the following statements printed in their user/operations manual and/or indicate this exact text on the side of the final device. “This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment” DTS Version: 1.0 User Manual Date: 2/24/2012 9:59:00 AM Confidential © Traxxas 2009 Page 7 of 7 3. FCC RF Exposure Statement “This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specified operating instructions for satisfying RF exposure compliance. The antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.” This document is provided “as is” with no warranties whatsoever…

Text truncated - open the document above for the full version.

Professional Testing (EMI), Inc. 1601 FM 1460, Suite B Round Rock, Texas 78664 April 5, 2012 On behalf of Traxxs, LP, Professional Testing (EMI), Inc. is seeking a modular approval for the Drag Timing System Stage End. Requirements listed in FCC part 15.212 are addressed below. 1) The device has a RF shield covering the RF generating portion of the circuit board. 2) The Cypress CYRF6936/7936 does provide buffering on the data inputs. 3) This is a battery operated device. Traxxas is only using the module in its own equipment; also, there is sufficient filtering on the module for the supplied voltage supply. 4) The antenna requirement is satisfied by the use of a yagi located on the PCB. 5) The module was tested in a stand-alone configuration by PTI. 6) The FCC ID label is located on the RF shielding of the module. 7) The User’s Manual explains that any modifications may strictly void the certification. 8) Emissions are below the RF Exposure limits. Jesse Banda

l{.*,t} t I} m $ F.ryft s LLg t} M t3 t} gLsn Authority to Act as Aeent Date: bPtE-202* American Certification BodY, Inc' 6731 Whittier Avenue Suite C110 Mclean, V A 22101 To Whom It MaY Concern: pTI is authorized to act on our behalf, until otherwise notified, for applications to G"-ftun Clrtification Body, Inc' (ACB)' we certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862' Fulhef, no party' as defined in 47 cFR 1 .2002 (b)"to the application is subject to denial of federal benefits, that includes FCC benefits' Thank you, Agency Agreement Expiration Date: l2-I4qntbs- By: Title: ,4,-- - n^ t-)*an- (Signdture) Director EE Garv lelilit--- (Print name) On behalf of: Traxxas- (CompanY Name) Telephone: W 022311+tfr {i(}in lload, fiano, Texas ?5S74Fhon*: $72-265-S*fin Fax: 972-3S5-S01 1 . www.Trexxas.com

Request for ConfidentialitY DTS Stase Date: LW 23,20f2- Subject: Confidentiality Request for: FCC ID: XVE-SAI1201 pursuant to FCC 47 CRF 0.457(d) and 0.45g and IC RSP- 1 00, Section 1 0, the applicant requests that a part of the subject FCC application be held confidential' Type of ConfidentialitY Requested ! stiort rerm ffi Permanent I Short term F it"tott r.t* ! Permanent*r I snott t.ttn X Permanent I short t.t* n Permanent I short t.tt fl Permanent n Snott t.t* [] Permanent X Short term X shott t..t ! Permanent* Exhibit Block Diagrams Extemal Photos Internal Photos Operati on Description/Theory of Operation Parts List & PlacemenYBOM Tune-Up Procedure Schematics Test Setup Photos ljser's Manual Garv DeWitt (Print name) *Note: Traxxas has spent substantial.effort in developing this product and it is one of the first of its kind in industry. Having ttie suu3ectinformation easily available to ;competition" would negate the advantage they have achieved by developing this product. Not protlcting the details of the design will result in financial hardship' Permanent ConfidentialitY: The applicant requests ttre extrlUits listed above as permanently confidential be petmanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public' Short-Term ConfidentialitY: The applicant requests tt " ."hiUit. selected above as shofi term conhdential be withheld from public view for a period of ltQ ouy, rro* the date of the Grant of Equipment Authorization and prior to marketing' This is to avoid premature release of sensitive information prior to marteting or release of the product to the public' Applicant is also aware that they are responsible to notit A'ag in tl',e event information regarding the product or the product is made available to the public. ACB will then ielease the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: ihe applicant undeistands that uniil such time that IC distinguishes between Shorl Term and Permanent Confidentiality, eitheriype of marked exhibit above will simply be marked Confidential when submitted to IC' Sincerely, By: 022311-6

Spectrum 2.4GHz, Module Pictures Version 1.0 2.4GHz Transmitter Version: 1.0 Module Pictures Date: 8/1/2011 10:10am Confidential © Traxxas 2009 Page 2 of 7 Revision History Date Version Description Author 8/1/2011 1.0 Original. Chris S. Russell 2.4GHz Transmitter Version: 1.0 Module Pictures Date: 8/1/2011 10:10am Confidential © Traxxas 2009 Page 3 of 7 Table of Contents 1. PICTURES ........................................................................................................................................................... 5 2.4GHz Transmitter Version: 1.0 Module Pictures Date: 8/1/2011 10:10am Confidential © Traxxas 2009 Page 4 of 7 List of Figures Figure 1 2.4GHz Transceiver Top ................................................................................................................................. 5 Figure 2 2.4GHz Transceiver Bottom ............................................................................................................................ 6 Figure 3 2.4GHz Transceiver Top with RF can ............................................................................................................. 7 2.4GHz Transmitter Version: 1.0 Module Pictures Date: 8/1/2011 10:10am Confidential © Traxxas 2009 Page 5 of 7 1. Pictures Figure 1 2.4GHz Transceiver Top 2.4GHz Transmitter Version: 1.0 Module Pictures Date: 8/1/2011 10:10am Confidential © Traxxas 2009 Page 6 of 7 Figure 2 2.4GHz Transceiver Bottom 2.4GHz Transmitter Version: 1.0 Module Pictures Date: 8/1/2011 10:10am Confidential © Traxxas 2009 Page 7 of 7 Figure 3 2.4GHz Transceiver Top with RF can

Spectrum 2.4GHz, Module Pictures Version 1.0 2.4GHz Transmitter Version: 1.0 Module Pictures Date: 8/1/2011 10:10am Confidential © Traxxas 2009 Page 2 of 7 Revision History Date Version Description Author 8/1/2011 1.0 Original. Chris S. Russell 2.4GHz Transmitter Version: 1.0 Module Pictures Date: 8/1/2011 10:10am Confidential © Traxxas 2009 Page 3 of 7 Table of Contents 1. PICTURES ........................................................................................................................................................... 5 2.4GHz Transmitter Version: 1.0 Module Pictures Date: 8/1/2011 10:10am Confidential © Traxxas 2009 Page 4 of 7 List of Figures Figure 1 2.4GHz Transceiver Top ................................................................................................................................. 5 Figure 2 2.4GHz Transceiver Bottom ............................................................................................................................ 6 Figure 3 2.4GHz Transceiver Top with RF can ............................................................................................................. 7 2.4GHz Transmitter Version: 1.0 Module Pictures Date: 8/1/2011 10:10am Confidential © Traxxas 2009 Page 5 of 7 1. Pictures Figure 1 2.4GHz Transceiver Top 2.4GHz Transmitter Version: 1.0 Module Pictures Date: 8/1/2011 10:10am Confidential © Traxxas 2009 Page 6 of 7 Figure 2 2.4GHz Transceiver Bottom 2.4GHz Transmitter Version: 1.0 Module Pictures Date: 8/1/2011 10:10am Confidential © Traxxas 2009 Page 7 of 7 Figure 3 2.4GHz Transceiver Top with RF can

Project 13461-10 Prepared for: Traxxas LLP 1100 Klein Road Plano, TX 75074 By Professional Testing (EMI), Inc. 1601 N. A.W. Grimes Blvd., Suite B Round Rock, Texas 78665 April 6, 2012 MPE / RF Exposure Report Drag Timing System Stage End FCC ID: XVE-SA11201 12145-10 Page 2 of 5 Table of Contents Title Page ........................................................................................................................................1 Table of Contents ...........................................................................................................................2 Certificate of Compliance..............................................................................................................4 1.0 MPE Prediction ...................................................................................................................4 1.1 Evaluation Procedure .......................................................................................................4 1.2 Evaluation Criteria ...........................................................................................................4 NOTICE: (1) This Report must not be used to claim product endorsement, by NVLAP, NIST, the FCC or any other Agency. This report also does not warrant certification by NVLAP or NIST. (2) This report shall not be reproduced except in full, without the written approval of Professional Testing (EMI), Inc. (3) The significance of this report is dependent on the representative character of the test sample submitted for evaluation and the results apply only in reference to the sample tested. The manufacturer must continuously implement the changes shown herein to attain and maintain the required degree of compliance. 12145-10 Page 3 of 5 Applicant: Traxxas LLP Applicant’s Address: 1100 Klein Road Plano, Texas 75074 FCC ID: XVE-SA11201 Project Number: 13461-10 Test Dates: March 9, 2012 I, Jesse Banda, for Professional Testing (EMI), Inc., being familiar with the FCC rules and test procedures have reviewed the test setup, measured data and this report. I believe them to be true and accurate. Jesse Banda EMC Engineer This report has been reviewed and accepted by Traxxas LLP. The undersigned is responsible for ensuring that this device will continue to comply with the FCC rules. _____________________________________ Traxxas LLP, Representative 12145-10 Page 4 of 5 1.0 MPE Prediction Prediction of MPE limit at a given distance was made by using equation from page 18 of OET Bulletin 65, Edition 97-01. 1.1 Evaluation Procedure S=PG/4R² or S=EIRP/4R² Where: S = power density P= power input to antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna EIRP = Equivalent (or effective) isotropcially radiated power 1.2 Antenna Gain The Antenna gain is 7.64 dBi 1.3 Evaluation Criteria MPE limit for uncontrolled exposure at prediction frequency (mW/cm²): 1.0 12145-10 Page 5 of 5 MPE Prediction Calculation Frequency (MHz) EIRP Waiver Limit (60/f(GHz)) Minimum Exposure Distance RF Field Density MPE Limit Result (mW) (mW) (cm) (mW/cm 2 ) (mW/cm 2 ) (P/F) 2406 41.591 24.94 20 8.27E-03 1.00 PASS 2426 40.551 24.73 20 8.07E-03 1.00 PASS 2453 34.514 24.46 20 6.87E-03 1.00 PASS Calculations 2406 MHz: S=EIRP/4R² = 41.591mW/(4*π*20cm*20cm) = 0.00827mW/cm 2 2426 MHz: S=EIRP/4R² = 40.551mW/(4*π*20cm*20cm) = 0.00807mW/cm 2 2453 MHz: S=EIRP/4R² = 34.514mW/(4*π*20cm*20cm) = 0.00687mW/cm 2

1601 North A.W. Grimes Blvd., Suite B Round Rock, TX 78665 e-mail: [email protected] (512) 244-3371 Fax: (512) 244-1846 April 18, 2012 Traxxas, LLP 1100 Klein Road Plano, TX 75074 Dear Gary: Enclosed is the Wireless Test Report for the Drag Timing System Stage End by Traxxas. This report can be used to demonstrate compliance with FCC requirements for wireless devices in the United States. If you have any questions, please contact me. Sincerely, Jeffrey A. Lenk President Enclosure Professional Testing (EMI), Inc Traxxas, LLP –Drag Timing System Stage End Wireless Test Report 13461-10 April 18, 2012 Page 2 of 34 Project 13461-10 Traxxas, LLP Drag Timing System Stage End Wireless Test Report Revision 1 Prepared for: Traxxas, LLP 1100 Klein Road Plano, TX 75074 By Professional Testing (EMI), Inc. 1601 N. A.W. Grimes Blvd., Suite B Round Rock, Texas 78665 April 18, 2012 Reviewed by Written by Jeffrey A. Lenk President Jesse Banda EMC Engineer Professional Testing (EMI), Inc Traxxas, LLP –Drag Timing System Stage End Wireless Test Report 13461-10 April 18, 2012 Page 3 of 34 Table of Contents Title Page .........................................................................................................................................1 1.0 Introduction ...........................................................................................................................6 1.1 Scope ................................................................................................................................6 1.2 EUT Description ..............................................................................................................6 1.3 Modifications ...................................................................................................................7 1.4 Test Site ...........................................................................................................................7 1.5 Applicable Documents .....................................................................................................7 1.6 Applicable Tests...............................................................................................................7 2.0 Maximum Peak Conducted Output Power ...........................................................................8 2.1 Test Procedure .................................................................................................................8 2.2 Test Criteria .....................................................................................................................8 2.3 Test Equipment ................................................................................................................8 2.4 Test Results ......................................................................................................................9 3.0 Occupied Bandwidth ...........................................................................................................10 3.1 Test Procedure ...............................................................................................................10 3.2 Test Criteria ...................................................................................................................10 3.3 Test Equipment ..............................................................................................................10 3.4 Test Result .....................................................................................................................10 4.0 Power Spectral Density .......................................................................................................14 4.1 Test Procedure ...............................................................................................................14 4.2 Test Criteria ...................................................................................................................14 4.3 Test Equipment ..............................................................................................................14 4.4 Test Results ....................................................................................................................14 5.0 Maximum Unwanted Emissions .........................................................................................18 5.1 Test Procedure ...............................................................................................................18 5.2 Test Criteria ...................................................................................................................18 5.3 Test Equipment ..............................................................................................................18 5.4 Test Results ....................................................................................................................19 6.0 Radiated Spurious Emissions ..............................................................................................23 6.1 Test Procedure ...............................................................................................................23 6.2 Test Criteria ...................................................................................................................24 6.3 Test Equipment ..............................................................................................................24 6.4 Test Results ....................................................................................................................25 7.0 Band Edge Emissions .........................................................................................................31 7.1 Test Procedure ...............................................................................................................31 7.2 Test Criteria ...................................................................................................................31 7.3 Test Equipment .......................................................…

Text truncated - open the document above for the full version.

Radiated Emission (rear) Radiated Emission (front) Conducted Emission Conducted Emission (close)