XYH-RDR2750VDigital Radio Base Station

Communications Systems RDR2750 Digital Base Station Radio QUICK START GUIDE RDR2750 Base Station Radio What’s Included: PS2750 Power Supply MB2750KIT Mounting Bracket Screw Kit Attaching / Removing the Antenna: Complete User Manual at: RCACommunicationsSystems.com Complete User Manual at: RCACommunicationsSystems.com Notes: ANB2750V/U Antenna www.rcacommunicationssystems.com [email protected] (877) 822-2915 Created in U.S.A. MENU P1 PTPTTT CH+VOL+ CH-VOL- P2 OKBACK MENU P1 PTPTTT CH+VOL+ CH-VOL- P2 OKBACK 34567 9 8 10 11 1 2 1213 141516 RCA RDR2750 Base Station Overview 1LCD Display7Push-To-Talk Button13 External Microphone Jack 2LED Indicators8Internal Speaker14Power On / Off Switch 3Menu Button9 P1 / P2 Buttons (Programmable) 15 Power Supply Connector 4Ok Button10 Channel Up / Down Buttons 16Antenna Connector 5Back Button11 Volume Up / Down Buttons 6Internal Microphone12 Programming Cable Port Note: The frequency band of your RDR2750 is marked on the radio label. If it is not visible, identify the frequency band according to the color code ring on the antenna: red indicates UHF 400- 430 Mhz, orange indicates UHF 440-470 Mhz, purple indicates VHF 136-174 Mhz. P1 CH+VOL+ CH-VOL- P2 1. With the base station turned off, set the antenna in the antenna connector and turn clockwise to secure it. 2. To remove the antenna, turn the base station off and turn the antenna counterclockwise. RCA and the RCA logo are trademarks used under license. For further information visit www.rca-brand.com. All other trademarks are the property of their respective owners. © 2022 RCA Communications Systems. All rights reserved. Complete User Manual at: RCACommunicationsSystems.comComplete User Manual at: RCACommunicationsSystems.com LED indicator LED IndicationRadio Status Blinking Red Radio is scanning, receiving an emergency transmission or has failed the self-test upon powering up. Solid RedRadio is transmitting. Blinking GreenRadio is powering up. Solid GreenRadio is receiving or carrier is present/busy channel. Rapidly Blinking GreenRadio is receiving a privacy-enabled call or data. Note: When the LED is solid green, it indicates the radio detects activity over the air. Due to the nature of the digital protocol, this activity may or may not affect the radio’s programmed channel. Setting Up Your Base Station: Connecting the Base Station to Power Outlet 1. Plug the adapter’s AC connector into the AC outlet socket. (see image A) 2. Plug the adapter’s DC connector into the DC socket on the back of the base station. (see image B) Image A Image B Turn On/Off the Base Station The base station can be turned On/Off by using the power switch. Note: There is no power up tone if the radio tones/alerts function is disabled. If your base station does not power up, check your connection to the power source. Make sure that power cord is properly attached. If your base station still does not power up, contact your RCA Communications Systems dealer. Adjusting the Volume To increase the volume, press the ( VOL+ ) button. To decrease the volume, press the ( VOL- ) button. Programmable Buttons Your RCA Communications Systems Dealer can program the programmable buttons as shortcuts to radio functions or preset channels/groups depending on the duration of a button press: Short Press - Press and release quickly. Long Press - Press and hold for the programmed duration (between 1 seconds and 3.75 seconds). The Programmable Functions are: All Alert Tones On/OffOne Touch Access 4One Touch Access 1 Emergency OnOne Touch Access 5One Touch Access 2 Emergency OffOne Touch Access 6One Touch Access 3 Nuisance DeleteRepeater/TalkaroundEncryption On/Off High/Low Transmit PowerScan On/OffLone Worker On/Off Monitor On/OffTight/Normal Squelch Display Icons The LCD display shows radio status, text entries, and menu entries. The following are icons that appear on the radio’s display. Received Signal Strength Indicator (RSSI) The number of bars displayed represents the radio signal strength and is only displayed while the radio is in receiving mode. MonitorSelected channel is being monitored. or Power LevelRadio is set at Low power. Radio is set at High power. Tones DisableRadio tones are turned off. ScanScan feature is enabled. Priority Scan Radio detects activity on channel/group designated as Priority 1 (if • is blinking) or Priority 2 (if • is steady) Unread MessageThe Radio has unread message(s) in the inbox. Inbox FullThe radio’s Inbox is full. EmergencyRadio is in Emergency mode. EncryptionThe Encryption feature is enabled. Talkaround The radio is currently configured for direct radio to radio communication. Private Call Indicates a Private Call in progress. In the Contacts list, it indicates a subscriber alias (name) or ID (number). Group Call / All Call Indicates a Group Call or All Call in progress. In the Contacts list, it indicates a group alias (name) or ID (number). Sent SuccessfullyThe text message is sent successfully. Send FailedThe text message cannot be sent. In-ProgressThe text message to a group alias or ID is pending transmission. Audio Tones Alert tones provide you with audible indications of the radio’s status or the radio’s response to data received. Continuous Tone - A monotone sound. Sounds continuously until termination. Periodic Tone - Sounds periodically depending on the duration set by the radio. Repetitive Tone - A single tone that repeats itself until it is terminated by the user. Momentary Tone - Sounds only once for a short period of time defined by the radio. All Alert Tones On/Off - Toggles all tones and alerts on or off Emergency On - Initiates an emergency alarm or call. Emergency Off - Cancels an emergency alarm or call. Nuisance Delete - Temporarily removes an unwanted channel, except for the Selected Channel, from the scan list. The Selected Channel refers to the user’s selected zone/channel combination from which scan is initiated. High/Low Transmit Power - Toggles transmit power level b…

Text truncated - open the document above for the full version.

RCA Communications Systems 555 W. Victoria Street Compton California United States Tel: 8778222915 Fax Number: 3175363718 Email: [email protected] Date: 2023-08-18 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Extended Frequencies Justification Dear Sir/Madam, The Radio with FCC ID: XYH-RDR2750V was designed to operate in the frequency bands 136-174MHz To aid equipment authorization in other countries which accept the United States FCC Grant for Certification, RCA Communications Systems is requesting that the FCC lists the frequencies 136-174MHz, under FCC Rule Part 90 on the FCC Grant. RCA Communications Systems attests that the radio will not be marketed to USA users with the frequency band which is not allowed by the rule part 90. Per the FCC’s KDB634817 guidance, as an alternative to listing the exact frequencies, we acknowledge that it’s a violation of the FCC Rules if this device operates on unauthorized frequencies. Frequency Range (MHz) FCC Rule Part 136-150.8 For FEDERAL 150.8-152.855 FCC Part 90 152.855-154 FCC Part 90 154-156.2475 FCC Part 90 157.1875-157.45 FCC Part 90 157.45-161.575 FCC Part 90 161.775-161.9625 FCC Part 90 162.0375-173.2 FCC Part 90 173.2-173.4 FCC Part 90 173.4-174 For FEDERAL Also, equipment programming is the responsibility of Authorized Service Personnel, the radio complies with 47 CFR Part 90.203(e), in that the operator cannot directly program the transmit frequencies using the normally accessible external controls. Sincerely Yours, Signature: Ben Burns CEO

RCA Communications Systems 555 W. Victoria Street Compton California United States Tel: 8778222915 Fax Number: 3175363718 Email: [email protected] Date: 2023-08-18 To: FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Attestation statement regarding the Digital Portable Radio spectrum efficiency Type of Equipment: Digital Radio Base Station Model number: RDR2750V FCC ID: XYH-RDR2750V Dear Sir or Madam We, RCA Communications Systems declare that the time division multiple access (TDMA) technology provides two paths in a 12.5 kHz channel bandwidth, thus meeting the one voice path per 6.25 kHz of spectrum requirement. This radio also provides data rate of 9600 bps in a 12.5 kHz channel, thus meeting the minimum data rate of 4800 bps in a 6.25 kHz channel. Please contact the undersigned if you have any questions or need any further information. Sincerely Yours, Signature: Ben Burns CEO

RCA Communications Systems 555 W. Victoria Street Compton California United States Tel: 8778222915 Fax Number: 3175363718 Email: [email protected] Attestation Letter Date: 2023-08-18 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 We, RCA Communications Systems Type of Equipment: Digital Radio Base Station Model number: RDR2750V FCC ID: XYH-RDR2750V The product, only support 136-174MHz, for the purpose of marketing, other frequencies has been shielded by software, the end user has no capability to activate it. The prototype supports 12.5KHz, 25kHz channel spacing, FCC only uses 12.5kHz, 25kHz is blocked by software, the end user has no capability to activate it. Sincerely Yours, Signature: Ben Burns CEO

CFR 47 §2.911(d)(5)(i) Attestation Letter RCA Communications Systems 555 W. Victoria Street Compton California United States Tel: 8778222915 Fax Number: 3175363718 Email: [email protected] Attestation Letter Date: 08/18/2023 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i) Filing FCC ID: XYH-RDR2750V RCA Communications Systems certifies that the equipment for which authorization is sought, is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature: Ben Burns CEO

CFR 47 §2.911 (d)(5)(ii) Attestation Letter RCA Communications Systems 555 W. Victoria Street Compton California United States Tel: 8778222915 Fax Number: 3175363718 Email: [email protected] Attestation Letter Date: 08/18/2023 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(ii) Filing FCC ID: XYH-RDR2750V RCA Communications Systems certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature: Ben Burns CEO

U.S. AGENT LETTER OF ATTESTATION Date: 2023-08-18 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID: XYH-RDR2750V RCA Communications Systems certifies that, as of the date of the filing of the application, RCA Communications Systems is our designated U.S. agent for service of process for the above referenced FCC ID. RCA Communications Systems accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. RCA Communications Systems accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent and Applicant Information: Name: RCA Communications Systems Address: 555 W. Victoria Street Compton California United States FRN: 0019356328 Tel.: 8778222915 Email: [email protected] Signed by (printed name): Ben Burns Signature:

CEO QA-FR-170-B 7/29/2014 RCA Communications Systems 555 W. Victoria Street Compton California United States Tel: 8778222915 Fax Number: 3175363718 Email: [email protected] FCC Authorization Date: 2023-08-18 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, RCA Communications Systems, the undersigned, hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Ben Burns

CEO RCA Communications Systems 555 W. Victoria Street Compton California United States Tel: 8778222915 Fax Number: 3175363718 Email: [email protected] FCC Confidential Authorization Date: 2023-08-18 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: XYH-RDR2750V In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, RCA Communications Systems hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description  Part list/Tune up Procedure (for licensed device) As well as short-term confidential treatment of information accompanying this application for a period of 180 days after grant is issued as outlined below:  Internal Photos The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature: Ben Burns

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230743380-EXP Page 1 of 5 EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS China Certification ICT Co., Ltd (Dongguan) Report No.: CR230743380-EXP Page 2 of 5 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230743380-EXP Page 3 of 5 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230743380-EXP Page 4 of 5 Antenna China Certification ICT Co., Ltd (Dongguan) Report No.: CR230743380-EXP Page 5 of 5

Label 1 Label 2 Label Location Information Label 1 Label 2

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230743380-INP Page 1 of 7 EXHIBIT C - EUT INTERNAL PHOTOGRAPHS China Certification ICT Co., Ltd (Dongguan) Report No.: CR230743380-INP Page 2 of 7 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230743380-INP Page 3 of 7 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230743380-INP Page 4 of 7 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230743380-INP Page 5 of 7 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230743380-INP Page 6 of 7 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230743380-INP Page 7 of 7

RF EXPOSURE EVALUATION Applicant: RCA Communications Systems Address: 555 W. Victoria Street Compton California United States FCC ID: XYH- RDR2750V Product Name: Digital Radio Base Station Standard(s): 47 CFR §1.1310, 47 CFR §2.1091 The above device has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR230743380-00C Date Of Issue: 2023/8/18 Reviewed By: Julie Tan Title: RF Engineer Approved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230743380-00C Page 2 of 4 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR230743380-00C Page 3 of 4 DOCUMENT REVISION HISTORY Revision Number Report Number Description of Revision Date of Revision 1.0 CR230743380-00C Original Report 2023/8/18 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230743380-00C Page 4 of 4 1. MAXIMUM PERMISSIBLE EXPOSURE (MPE) 1.1 Applicable Standard According to 1.1310, 2.1091 systems operating under the provisions of this section shall be operated in a manner that ensures the public is not exposed to RF energy level in excess of the communication guidelines. Limits for Maximum Permissible Exposure (MPE) Limits for Occupational/Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Time |E|, |H| or S (minutes) 0.3- 3.0 614 1.63 (100)* 6 3.0 - 30 1842/f 4.89/f (900/f 2 )* 6 30-300 61.4 0.163 1.0 6 300-1500 / / f/300 6 1500-100,000 / / 5 6 f = frequency in MHz; * = Plane-wave equivalent power density; 1.2 MPE Calculation Prediction of power density at the distance of the applicable MPE limit S = PG/4R 2 Where: S = power density (in appropriate units, e.g. mW/cm 2 ); P = power input to the antenna (in appropriate units, e.g., mW); G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); 1.3 MPE Results Frequency (MHz) Antenna Gain Maximum Conducted output power including Tune-up Tolerance Operation Duty Cycle (%) Evaluation Distance (cm) Power Density (mW/cm 2 ) Power Density Limit (mW/cm 2 ) (dBi) (numeric) (dBm)(mW) 136-174 2.5 1.78 37 500050250.57 1.0 Note: the Maximum Conducted output power including Tune-up Tolerance was declared by manufacturer. Result: The device meet FCC MPE at 25 cm distance for Occupational/Controlled condition. ===== END OF REPORT =====

Unit11， 12/F, BLK B Veristrong ind. Ctr, 34-36 Au Pui Wan Street, Fo Tan Shatin, N.T. HK Tel: 852 2345 0215 Fax: 852 27978191 Email:[email protected] No.: CUSTOMER’S NAME : 客户名称 CUSTOMER’S MODEL NO . : 客户型号 CUSTOMER’S PART NO. : 客户料号 PRODUCT NAME : 产品名称 OUR MODEL NO. : 本公司型號 NO. 1 2 3 4 Capability Test Report (性能测试报告) Please fax back this brefile page with authorized signature and company chop as customer’s approval on samples,Thanks! (如果此产品得到您的确认,请传回本页给我们.) G-RA0K11165109-SM009 Pages(页码) Bondale Electronics Ltd. 1 1 COVER OF SPECIFICATION 规 格 书 Rubber Antenna Company Chop 普星 客户签名 博 钜 电 子 有 限 公 司 Product Drawing (产品图) Specification of Product (规格书内容) 本规格书由以下内容组成(样品另附)： Website: www.bondale.com Items(项目) 客户公章 Certificate Of Conformance ROHS(环保证明书) 共 5 页 1 1 This Specification is Composed of Under Listed (Samples be attached) Customer SignCustomer Total pages(包含本页) Unit11， 12/F, BLK B Veristrong ind. Ctr, 34-36 Au Pui Wan Street, Fo Tan Shatin, N.T. HK Tel: 852 2345 0215 Fax: 852 27978191 Email:[email protected] TO: DATE: File NO.: Customer Part No. : Bondale Part No. : Description : Rubber Antenna G-RA0K11165109-SM009 is fully comply with the EU directive 2011/65/EU, (EU)2015/863 and packaging directive 94/62/EC and that its content of hazardous substances is below the values as listed: ROHS critical values: *Cadmium(Cd)under 100 ppm Generallyunder 1,000 ppm Products that contain Copper alloy components under 40,000 ppm Product that contain Steel alloy components under 3,500 ppm Product that contain aluminum alloy components under 4,000 ppm *Mercury (Hg)under 1,000 ppm *Hexavalent Chormium (Cr6+)under 1,000 ppm *PBBsunder 1,000 ppm *PBDEsunder 1,000 ppm *DEHPunder 1,000 ppm *BBPunder 1,000 ppm *DBPunder 1,000 ppm *DIBPunder 1,000 ppm Packaging directive 94/62/EC critical values: *Packaging (Pb + Cd +Hg +Cr6+ ) under 100 ppm Expemted below: If the above mentioned item is reprocessed by customer, we wouldn’t promise and assure the content of hazardous substances of the product item. On behalf of Bondale Electronics Ltd. ROHS green chop and GPMS spokesman sign(Rohs綠色印章+ GPMS負責人簽名): Yours sincerely, Bondale Electronics Ltd. 博 钜 电 子 有 限 公 司 Be Exempted*Lead (Pb) 普星 CERTIFICATE OF CONFORMANCE ROHS We, Bondale Electronics ltd. assured that the above mentioned item: Website: www.bondale.com G-RA0K11165109-SM009 2023-04-07 ---GREEN PRODUCT MANAGEMENT SYSTEM (GPMS)--- ---綠色產品管理系統--- PR OJECTION ( 視角 ) 版次 21 /03-23 陆 东 Note: 1.Les connecteurs sont: sma-p avec nickelage2.La couleur du tuyau est: noir3.La fréquence de fonctionnement de l’antenne est: 136~174Mhz4.Gravure au radium ”136 à 71Mhz“ Customer : 普星 Specification No.: Model No.: G-RA0K11165109-SM009 1, Application The antenna specified in this specification is applicable for the radio-communication 2, Dimensions As per Drawing No. G-RA0K11165109-SM009 attached. 3, Materials As specified in drawing No. G-RA0K11165109-SM009 4, Electrical Characteristics i) Resonate Frequency : 136~174 MHz ii) Impedance : 50 ohm Nominal iii) Radiation Pattern : Omni Directional iv) Polarization : Vertical v) Standing Wave Ratio (S.W.R): 2.0 or less at Resonate point vi) Insulation resistance : 500 M ohm at DC 500V 5, Mechanical characteristics: The strength of fixing between sleeve and stud shall withstand the following stresses i)Vertical Direction: 2.0 kg Rotating Direction: 2.0 kgf.cm 6, Others: Any modification of this specification has to be agreed by us Prepared By:Checked By:Approval: RUBBER ANTENNA SPECIFICATION Antenna Gain: 2.5 dBi Specification NO.: Model NO.: G-RA0K11165109-SM009 Capability Test Report

TEST REPORT Applicant: RCA Communications Systems Address: 555 W. Victoria Street Compton California United States FCC ID: XYH-RDR2750V Product Name: Digital Radio Base Station Standard(s): 47 CFR Part 2 47 CFR Part 90 ANSI C63.26-2015 ANSI/TIA 603-E-2016 The above device has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR230743380-00B Date Of Issue: 2023/11/14 Reviewed By: Julie Tan Title: RF Engineer Approved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230743380-00B Page 2 of 53 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR230743380-00B Page 3 of 53 CONTENTS DOCUMENT REVISION HISTORY .......................................................................................... 5 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 7 1.2.1 EUT Operation Condition: ............................................................................................................................. 7 1.2.2 Support Equipment List and Details .............................................................................................................. 7 1.2.3 Support Cable List and Details ...................................................................................................................... 7 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 7 1.3 MEASUREMENT UNCERTAINTY .......................................................................................................... 8 2. SUMMARY OF TEST RESULTS ............................................................................................ 9 TRANSMITTER OUTPUT POWER .................................................................................................................. 9 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 10 3.1 TRANSMITTER FREQUENCY STABILITY ........................................................................................... 10 3.1.1 Applicable Standard ..................................................................................................................................... 10 3.1.2 Test Procedure ............................................................................................................................................. 10 3.1.3 EUT Setup Block Diagram .......................................................................................................................... 11 3.2 TRANSMITTER OUTPUT POWER ....................................................................................................... 12 3.2.1 Applicable Standard ..................................................................................................................................... 12 3.2.2 Test Procedure ............................................................................................................................................. 12 3.2.3 EUT Setup Block Diagram .......................................................................................................................... 13 3.3 OCCUPIED BANDWIDTH & EMISSION MASK .................................................................................... 14 3.3.1 Applicable Standard ..................................................................................................................................... 14 3.3.2 Test Procedure ............................................................................................................................................. 15 3.3.3 EUT Setup Block Diagram .......................................................................................................................... 15 3.4 TRANSMITTER UNWANTED EMISSIONS(CONDUCTED) .................................................................... 16 3.4.1 Applicable Standard ..................................................................................................................................... 16 3.4.2 Test Procedure ...........................…

Text truncated - open the document above for the full version.

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230743380-00B-TSP Page 1 of 1 EXHIBIT D - TEST SETUP PHOTOGRAPHS Radiated Emission Below 1GHz View Radiated Emission Above 1GHz View