XYO-WB5505G CPE

MIMO ATEL'S CPE ※：n30/LTE B30/LTE B48 21 dBm ±2 dB n41/n77/n78/B41 are HPUE 26 dBm ±2 dB ※ WB550-NA-00 North America 5G Sub-6: n2/n5/n7/n12/n14/n25/n30/n41/n48/n66/n71/n77/n78 LTE FDD: B2/B4/B5/B7/B12/B13/B14/B17/B25/B26/B29/B30/B66/B71 LTE TDD: B41/48 LAA: B46 WCDMA: B2/4/5 Module: Verizon & AT&T Certified We remind users here that changes or modifications not explicitly approved by the responsible party may cause users to lose the authority to operate the equipment. Quick Start Guide Introduction The WB550 is a premium indoor 5G NR CPE, designed for 802.11a/b/ g/n/ac/ax dual band Wi-Fi access. The product provides optimized high throughput data and a wide area coverage network for residential, commercial and enterprise users, supporting multiple services. Customers enjoy reliable dual-band Wi-Fi AP functions, broadband access and hot- spot Wi-Fi connections with the WB550. LTE /5G NR BTS Indoor CPE Power Adapter Wi-Fi 11 a/b/g/n/ac/ax I/O Panel of Router Packing List LED Panel of Router Make sure you have everything you need to properly configure the device. IDU Power supply Ethernet cable Configure Hardware Insert SIM Card If you want to remove the SIM card, please lightly press the SIM card, the SIM card will pop out. Make sure the CPE is turned off before you insert or remove your SIM card. Otherwise, the CPE and SIM card may be damaged. Please insert your SIM card (3FF) as following: How does it Work The figure is just for reference only, please connect according to your requirements. Step 1 Connect the supplied power adapter to the CPE. Step 2 Connect other devices. You can connect your computer or classic Switch via Ethernet cable to LAN port. You can connect your laptop via Wi-Fi. You can connect your telephone via TEL port. When you are using the CPE, you can adjust the position and direction of CPE to get stronger NR signal, you can judge from the NR signal LED indicators. LED Indicators When set up the CP860, you will see the following LED indicators: Indicator Status Description POWER Steady on Power On Off No Power Supply INTERNET Steady on Internet Available Off Internet Unavailable Blinking (500ms interval) Searching network of NR WiFi Steady on WiFi Available Off WiFi unavailable VOICE Steady on VOICE Available Off VOICE Unavailable SIGNAL Steady on Display the current LTE network signal, the stronger signal, the more bars on Off No Signal Blinking one by one Firmware upgrade Configure The CPE Login to the Website Use a browser to access the management web page to configure and manage the CPE. The following procedure describes how to use a computer running Windows 7 or above version and Internet Explorer to connect to the CPE webpage. Step 1 Step 2 Connect the CPE correctly. Start Internet Explorer, go to http://192.168.1.1 in the address bar, and press Enter. Step 3 click Log In. Enter the user name (admin) and password (admin), and You can connect to the management web page after the password is verified. Configuration of NR Step 1 Connect the CPE correctly. Step 2 Enter the management website. Step 3 Choose Settings → Network → NRSettings. Step 4 Set the connection mode and scan mode. The default setting is automatically connection and full band scanning,if you want to connect the LTE network according to your needs,you can set the connection mode as manual,and simply scan a specified band. Configuration of Wi-Fi Step 1 Step 2 Step 3 Step 4 Connect the CPE correctly. Enter the management website. Choose Settings → Wi-Fi → WLAN Settings. In the General Settings, set Wi-Fi Enable or enable Wi-Fi with the Wi-Fi button. Step 5 Step 6 In the Setting, change the SSID, such as "NR-Router" To ensure data security, it is recommended that you change the Wi-Fi password by default. Step 7 Click Submit to save the settings. Troubleshooting The POWER indicator does not turn on. Make sure that the power cable is connected properly and the CPE is powered on. Make sure that the power adapter is compatible with the CPE. Fails to login the web management page. Make sure that the CPE is started. Verify that the CPE is correctly connected to the computer through Wi-Fi or a network cable. The CPE fails to search for the wireless network. Check that the power adapter is connected properly. Check that the CPE is placed in an open area that is far away from obstructions, such as concrete or wooden walls. Check that the CPE is placed far away from household electrical appliances that generate strong electromagnetic field, such as micro-wave ovens, refrigerators, and satellite dishes. The power adapter of the CPE is overheated. The CPE will be overheated after being used for a long time. There-fore, power off the CPE when you are not using it. Check that the CPE is properly ventilated and shielded from direct sunlight. The parameters are restored to default values. If the CPE is powered off unexpectedly while being configured, the parameters may be restored to the default settings. After configuring the parameters, download the configuration file to quickly restore the CPE to the desired settings. If the problem persists,please contact authorized local service suppliers. Product Marketing Name (PMN)：ATEL 5G CPE FCC ID: XYO-WB550 IC ID: 20255-WB550 FCC Regulations ATEL 5G CPE complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interf…

Text truncated - open the document above for the full version.

Rev 11/20/07 Asiatelco Technologies Co. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: XYO-WB550 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name (1. Block Diagram.pdf; 2.SCH.pdf; 3. Operation Description.pdf; 4.BOM.pdf; 5. Tune up.pdf;) (Block Diagram, SCH, Operation Description, BOM, Tune Up Procedure) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 45 days after the grant as outlined in Public Notice DA 04-1705. Exhibit Type File Name (External Photos, Internal Photos, Test Setup Photos, Manual) (Appendix A.4-External Photos.pdf; Appendix A.5-Internal Photos.pdf; Appendix A.2 - DSS_DTS_NII Setup Photos; Appendix A.3 - PCB Setup Photos; Manual;) Sincerely, Name: Ella.chen Title: Certification Manager

We Product Name：WB550 Model Name： WB550-NA, WB550-EU Change Description： Model Name different。 Except for the above changes, there are no other changes between WB550-EU and WB550-NA, including the schematic, PCBlayout, Radiation parameter. Signed by: Represent: Ella.chen Corporation： Asiatelco Technologies Co.

RF_160, Issue 04 Asiatelco Technologies Co. Declaration of Authorization We Name: Asiatelco Technologies Co. Address: #289 Bisheng Road, Building-8, 3F, Zhang jiang Hi-Tech Park, Pudong, Shanghai 201204, China City: Shanghai Country: China Declare that: Name Representative of agent: Well Wei Agent Company name: SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd Address: South of No. 6 Plant, No. 1, Runsheng Road, Suzhou Industrial Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone City: Suzhou Country China is authorized to apply for Certification of the following product(s): Product description: 5G CPE Type designation: WB550-NA/WB550-EU Trademark: ATEL on our behalf. Date: 2023/01/10.. City:  Shanghai .. Name:  Ella.chen .. (2) Email: [email protected]....... Signature:  . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

Page 1 of 4 1 Photographs - EUT Constructional Details WB550 Page 2 of 4 Page 3 of 4 Page 4 of 4

Model: WB550-NA IMEI: XXXXXXXXXXXXXXX MAC: XXXXXXXXXX SN: XXXXXXXXXXXX User name: xxxxxx Password: xxxxxx Asiatelco Technologies Co. Made in China 标签文字字体：Proxima Nova 尺寸：50.5x50.5mm,公差0~-0.1mm 印刷内容公差：±0.2mm 材质： PET50#+哑膜 FCC ID: XYO-WB550 IC: 20255-WB550 Model: WB550-EU IMEI: XXXXXXXXXXXXXXX MAC: XXXXXXXXXX SN: XXXXXXXXXXXX User name: xxxxxx Password: xxxxxx Asiatelco Technologies Co. Made in China 标签文字字体：Proxima Nova 尺寸：50.5x50.5mm,公差0~-0.1mm 印刷内容公差：±0.2mm 材质： PET50#+哑膜 FCC ID: XYO-WB550 IC: 20255-WB550

Page 1 of 6 1 Photographs - EUT Constructional Details Model No.:WB550-NA/WB550-EU Page 2 of 6 WIFI ANT0 WIFI ANT1 ANT8 WCDMA B2/4/5 LTE B2/4/5/7/12/13/14/17/25/26/30/66/71/41 NR N2/5/7/12/25/66/71/41(MIMO) Page 3 of 6 ANT3 N41(MIMO) TX ANT6 LTE B48 TX NR N77(MIMO)/78(MIMO) TX ANT1 NR N77(MIMO)/78(MI MO) TX Page 4 of 6 Page 5 of 6 Page 6 of 6

SGS-CSTC STANDARDS TECHNICAL SERVICES (XI 'AN) CO., LTD. Report No.: AR/2021/4000901 Page: 1 of 22 Authorized Signature: Simon Ling Wireless Laboratory Manager TEST REPORT Application No: AR/2021/40009 Applicant: Fibocom Wireless Inc. Address of Applicant 1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan,Shenzhen, China Manufacturer: Fibocom Wireless Inc. Address of Manufacturer: 1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan,Shenzhen, China EUT Description: 5G module Model No.: FG360-NA Trade Mark: Fibocom FCC ID: ZMOFG360NA Standard(s) : 47 CFR Part 15, Subpart B Date of Receipt: 2021/5/7 Date of Test: 2021/5/7 to 2021/6/7 Date of Issue: 2021/6/7 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC STANDARDS TECHNICAL SERVICES (XI 'AN) CO., LTD. Report No.: AR/2021/4000901 Page: 2 of 22 Revision Record Version Chapter Date Modifier Remark 01 2021/6/7 Original Authorized for issue by: Prepared By (Leah Chen) / Engineer Checked By (Daniel Wang) /Reviewer SGS-CSTC STANDARDS TECHNICAL SERVICES (XI 'AN) CO., LTD. Report No.: AR/2021/4000901 Page: 3 of 22 Test Summary Emission Part Item Standard Method Requirement Result Conducted Emissions at Mains Terminals (150kHz-30MHz) 47 CFR Part 15, Subpart B ANSI C63.4:2014 Class B Pass Radiated Emissions (30MHz-1GHz) 47 CFR Part 15, Subpart B ANSI C63.4:2014 Class B Pass Radiated Emissions (above 1GHz) 47 CFR Part 15, Subpart B ANSI C63.4:2014 Class B Pass Internal Source Upper Frequency Below 1.705MHz 30MHz 1.705MHz to 108MHz 1GHz 108MHz to 500MHz 2GHz 500MHz to 1GHz 5GHz Above 1GHz 5th harmonic of the highest frequency or 40GHz, whichever is lower SGS-CSTC STANDARDS TECHNICAL SERVICES (XI 'AN) CO., LTD. Report No.: AR/2021/4000901 Page: 4 of 22 Contents 1 GENERAL INFORMATION ........................................................................................................................ 5 1.1 DESCRIPTION OF SUPPORT UNITS ......................................................................................................... 6 1.2 TEST LOCATION .................................................................................................................................... 6 1.3 TEST FACILITY ...................................................................................................................................... 6 1.4 DEVIATION FROM STANDARDS ............................................................................................................... 6 1.5 ABNORMALITIES FROM STANDARD CONDITIONS ..................................................................................... 6 2 EMISSION TEST RESULTS ...................................................................................................................... 7 2.1 CONDUCTED EMISSIONS AT MAINS TERMINALS (150KHZ-30MHZ) .......................................................... 7 2.1.1 E.U.T. Operation ............................................................................................................................ 7 2.1.2 Test Setup Procedures .................................................................................................................. 8 2.1.3 Measurement Data ........................................................................................................................ 8 2.2 RADIATED EMISSIONS (30MHZ-1GHZ) ................................................................................................ 11 2.2.1 E.U.T. Operation .......................................................................................................................... 11 2.2.2 Test Setup Procedures ................................................................................................................ 12 2.2.3 Measurement Data ...................................................................................................................... 12 2.3 RADIATED EMISSIONS (ABOVE 1GHZ) .................................................................................................. 15 2.3.1 E.U.T. Operation .......................................................................................................................... 15 2.3.2 Test Setup Procedures ................................................................................................................ 16 2.3.3 Measurement Data ...................................................................................................................... 16 3 EQUIPMENT LIST .................................................................................................................................... 19 4 MEASUREMENT UNCERTAINTY ........................................................................................................... 21 5 PHOTOGRAPHS ...................................................................................................................................... 22 5.1 TEST SETUP ....................................................................................................................................... 22 5.2 EUT CONSTRUCTIONAL DETAILS (EUT PHOTOS) ................................................................................. 22 SGS-CSTC STANDARDS TECHNICAL SERVICES (XI 'AN) CO., LTD. Report No.: AR/2021/4000901 Page: 5 of 22 1 General Information Product Name: 5G module Model No.(EUT): FG360-NA Trade Mark: Fibocom Hardware Version: V1.0 Software Version: 81103.7000.30.02.01.09 Frequency Bands: Band Tx (MHz) Rx (MHz) WCDMA Band II 1850~1910 1930~1990 WCDMA Band IV 1710~1755 2110~2155 WCDMA Band V 824~849 869~894 LTE Band 2 1850~1910 1930~1990 LTE Band 4 1710~1755 2110~2155 LTE Band 5 824~849 869~894 LTE Band 7 2500~2570 2620~2690 LTE Band 12 699~716 729~746 LTE Band 13 777~787 746~756 LTE Band 14 788~798 746~756 LTE Band 17 704~716 734~746 LTE Band 25 1850~1915 1930~1995 LTE Band 26 814~849 859~894 LTE …

Text truncated - open the document above for the full version.

` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2211000265RG05 Rev.: 01 Page: 1 of 23 Authorized Signature: Panta Sun Wireless Laboratory Manager TEST REPORT Application No.: SEWM2211000265RG Applicant: Asiatelco Technologies Co. Address of Applicant: #289 Bisheng Road, Building-8, 3F, Zhang jiang Hi-Tech Park, Pudong, Shanghai 201204, China Manufacturer: Asiatelco Technologies Co. Address of Manufacturer: #289 Bisheng Road, Building-8, 3F, Zhang jiang Hi-Tech Park, Pudong, Shanghai 201204, China EUT Description: 5G CPE Model No.: WB550-NA/WB550-EU Trade Mark: ATEL FCC ID: XYO-WB550 Standard(s): FCC 47 CFR Part 15, Subpart B Date of Receipt: 2022/11/22 Date of Test: 2022/12/28 to 2022/12/29 Date of Issue: 2023/01/05 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2211000265RG05 Rev.: 01 Page: 2 of 23 Revision Record Version Chapter Date Modifier Remark 01 2023/01/05 Original Prepared By (King-p Li) / Test Engineer Checked By (Well Wei) / Reviewer ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2211000265RG05 Rev.: 01 Page: 3 of 23 Test Summary Emission Part Item Standard Method Requirement Result Conducted Emissions at Mains Terminals (150kHz-30MHz) FCC 47 CFR Part 15, Subpart B ANSI C63.4:2014 Class B Pass Radiated Emissions (30MHz-1GHz) FCC 47 CFR Part 15, Subpart B ANSI C63.4:2014 Class B Pass Radiated Emissions (above 1GHz) FCC 47 CFR Part 15, Subpart B ANSI C63.4:2014 Class B Pass Internal Source Upper Frequency Below 1.705MHz 30MHz 1.705MHz to 108MHz 1GHz 108MHz to 500MHz 2GHz 500MHz to 1GHz 5GHz Above 1GHz 5th harmonic of the highest frequency or 40GHz, whichever is lower ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2211000265RG05 Rev.: 01 Page: 4 of 23 Contents 1 General Information ...................................................................................................... 5 1.1 Description of Support Units .................................................................................. 7 1.2 Test Location ......................................................................................................... 7 1.3 Test Facility ........................................................................................................... 7 1.4 Deviation from Standards ...................................................................................... 7 1.5 Abnormalities from Standard Conditions ............................................................... 7 2 Emission Test Results .................................................................................................. 8 2.1 Conducted Emissions at Mains Terminals (150kHz-30MHz) ................................. 8 2.1.1 E.U.T. Operation ................................................................................................ 8 2.1.2 Test Setup Procedures ...................................................................................... 9 2.1.3 Measurement Data ............................................................................................ 9 2.2 Radiated Emissions (30MHz-1GHz) .................................................................... 12 2.2.1 E.U.T. Operation .............................................................................................. 12 2.2.2 Test Setup Procedures .................................................................................... 13 2.2.3 Measurement Data .......................................................................................... 13 2.3 Radiated Emissions (above 1GHz) ...................................................................... 16 2.3.1 E.U.T. Operation .............................................................................................. 16 2.3.2 Test Setup Procedures .................................................................................... 17 2.3.3 Measurement Data .......................................................................................... 17 3 Equipment List ............................................................................................................ 20 4 Measurement Uncertainty ........................................................................................... 22 5 Photographs ............................................................................................................... 23 5.1 Test Setup ........................................................................................................... 23 ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2211000265RG05 Rev.: 01 Page: 5 of 23 1 General Information EUT Description: 5G CPE Model No.: WB550-NA/WB550-EU Trade Mark: ATEL Hardware Version: P1 Software Version: CPE_WB550_NA00_VZW_v1.0.8.1 IMEI: 862424050036655 Frequency Bands: Band Tx (MHz) Rx (MHz) WCDMA Band II 1850~1910 1930~1990 WCDMA Band IV 1710~1755 2110~2155 WCDMA Band V 824~849 869~894 LTE Band 2 1850~1910 1930~1990 LTE Band 4 1710~1755 2110~2155 LTE Band 5 824~849 869~894 LTE Band 7 2500~2570 2620~2690 LTE Band 12 699~716 729~746 LTE Band 13 777~787 746~756 LTE Band 14 788~798 746~756 LTE Band 17 704~716 734~746 LTE Band 25 1850~1915 1930~1995 LTE Band 26 (814 to 824 MHz) 814~824 859~869 LTE Band 26 (824 to 849 MHz) 824~849 869~894 LTE Band 30 2305 ~ 2315 2350 ~ 2360 LTE Band 41 2496~2690 2496~2690 LTE Band 48 3550~3700 3550~3700 LTE Band 66 1710~1780 2110~2200 LTE Band 71 663~698 617~652 NR Band n2 1850~1910 1930~1990 NR Band n5 824~849 869~894 NR Band n7 2500~2570 2620~2690 NR Band n12 699~716 729~746 NR Band n14 788~798 758~768 ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2211000265RG05 Rev.: 01 Page: 6 of 23 NR Band n25 1850~1915 1930~1995 NR Band n30 2305 ~ 2315 2350 ~ 2360 NR Band n41 2496~2690 2496~2690 NR Band n66 1710~1780 2110~2180 NR Band n71 663~698 …

Text truncated - open the document above for the full version.

SGS-CSTC STANDARDS TECHNICAL SERVICES (SUZHOU) CO., LTD. Page: 1 of 3 Appendix A Setup Photos for ZR/2021/70020 SGS-CSTC STANDARDS TECHNICAL SERVICES (SUZHOU) CO., LTD. Page: 2 of 3 1 Setups 1.1 Unwanted Emissions that fall Outside of the Restricted Bands(Radiated) and Unwanted Emissions in the Restricted Bands (Radiated) below 1GHz SGS-CSTC STANDARDS TECHNICAL SERVICES (SUZHOU) CO., LTD. Page: 3 of 3 1.2 Unwanted Emissions that fall Outside of the Restricted Bands(Radiated) and Unwanted Emissions in the Restricted Bands (Radiated) above 1GHz

SGS-CSTC STANDARDS TECHNICAL SERVICES (XI 'AN) CO., LTD. Page: 1 of 7 Appendix A Setup Photos for AR/2021/40009 SGS-CSTC STANDARDS TECHNICAL SERVICES (XI 'AN) CO., LTD. Page: 2 of 7 1 Setups – PCE 1.1 AC Power Line Conducted Emissions SGS-CSTC STANDARDS TECHNICAL SERVICES (XI 'AN) CO., LTD. Page: 3 of 7 1.2 Unwanted Emissions that fall Outside of the Restricted Bands(Radiated) and Unwanted Emissions in the Restricted Bands (Radiated) below 1GHz SGS-CSTC STANDARDS TECHNICAL SERVICES (XI 'AN) CO., LTD. Page: 4 of 7 1.3 Unwanted Emissions that fall Outside of the Restricted Bands(Radiated) and Unwanted Emissions in the Restricted Bands (Radiated) above 1GHz SGS-CSTC STANDARDS TECHNICAL SERVICES (XI 'AN) CO., LTD. Page: 5 of 7 2 Setups – CXX 2.1 AC Power Line Conducted Emissions SGS-CSTC STANDARDS TECHNICAL SERVICES (XI 'AN) CO., LTD. Page: 6 of 7 2.2 Radiated Emission below 1GHz SGS-CSTC STANDARDS TECHNICAL SERVICES (XI 'AN) CO., LTD. Page: 7 of 7 2.3 Radiated Emission above 1GHz Remark: Performed by SGS-CSTC STANDARDS TECHNICAL SERVICES (XI 'AN) CO.,LTD.

` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Rev.: 01 Page: 1 of 5 Appendix A.1 Setup Photos for SEWM2211000265RG05 ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Rev.: 01 Page: 2 of 5 1.1 AC Power Line Conducted Emissions ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Rev.: 01 Page: 3 of 5 1.2 Radiated Emission below 1GHz ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Rev.: 01 Page: 4 of 5 1.3 Radiated Emission above 1GHz 1G-18GHz: ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Rev.: 01 Page: 5 of 5 Above 18GHz: ---End of Attachment---