Y2L00030433 MHz Remote Control

Boly Media Comminicationas ( Asia) Co., Ltd. 433MHz Remote Control User Manual Features: It is designed with small size, beautiful exterior , Sound wave resonator (SAW) is used for stabilizing frequency, It is applied for wireless alarms, wireless controlling devices, etc. Using High stability, SMT components, SAW (sound wave resonator) Optional for encoding IC Optional for the outside color Tech Spec: 1. Operating voltage: DC12V(one unit 27A/12V battery) 2. Operating current: ≤ 10mA; 3. Modulation mode : ASK (AM) 4. Operating frequency: 433.92 MHz 5. Transmitting distance:> 80m (open space) 6. Encoding type: fixed code ,learning code, rolling code 7. Size: 55 * 30 * 13mm Applications: Widely used in various anti-theft alarms, security systems, Remote controlling devices, Motor-driven curtain, roller blind door, garage / gate barriers, motorcycle, short-range wireless remote control products, industrial control products. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct The interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of FCC Rules. 1. Operation is subject to the following two conditions: 2. This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. such modifications could void the user’s authority to operate this equipment.

Boly Media Comminicationas ( Asia) Co., Ltd. Boly Media Comminicationas ( Asia) Co., Ltd. Boly Media Communications (Asia) Co., Ltd. Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with Sections 0.457 and 0.459 pertaining to confidential material. Boly Media Communications (Asia) Co., Ltd. would like the following documents regarding this submission for FCC ID: Y2L00030 to be kept confidential. 1. Block Diagram 2. Schematic 3. Theory of Operation The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely yours, Xiao Ping HU/ CEO Company Name: Boly Media Communications (Asia) Co., Ltd. Fax: +852-27745336 Tel: +852-27745236 E-mail: [email protected]

External photos of the EUT

FCC TEST REPORT 47 CFR FCC Part 15 Subpart C 15.231 Report Reference No. .....................: FCC ID . ............................................: TRE13090006 R/C: 20880 Y2L00030 Compiled by ( position+printed name+signature) .. : File administrators Jerome Luo Supervised by ( position+printed name+signature) .. : Test Engineer Yuchao Wang Approved by ( position+printed name+signature) .. : Manager Wenliang Li Date of issue ..................................... : Oct 18, 2013 Testing Laboratory Name .............. : Shenzhen Huatongwei International Inspection Co., Ltd Address ............................................ : Keji Nan No.12 Road, Hi-tech Park, Shenzhen, China Applicant’s name ............................ : Boly Media Communications (Asia) Co., Ltd. Address ............................................ : WORKSHOP B9,6/F,BLOCK B,CAMBRIDGE PLAZA NO.188 SAN WAN ROAD, SHEUNG SHUI,N.T.,HONG KONG Manufacturer’s name ..................... : Boly Media Communications (shenzhen) Co., Ltd. Address ............................................ : 2F,Shanshui Building B,Yungu Innovation Industrial park,NO.1183,Liuxian Blvd, Nanshan District,Shenzhen..Guangdong,China Test specification ...........................: Standard ........................................... : 47 CFR FCC Part 15 Subpart C & 15.231 ANSI C63.10: 2009 TRF Originator .................................. : Shenzhen Huatongwei International Inspection CO., Ltd Master TRF ....................................... : Dated 2006-06 Shenzhen Huatongwei International Inspection Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Huatongwei International Inspection Co., Ltd is acknowledged as copyright owner and source of the material. Shenzhen Huatongwei International Inspection Co., Ltd takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : 433MHz Remote Control Trade Mark ....................................... : BOLYGUARD/SCOUTGUARD Model/Type reference ....................... : ZABY1-4 Modulation ........................................ : ASK Listed Models .................................. : / Operation Frequency ....................... : 433.92MHz Result................................................ : Positive Report No.: TRE13090006 Page 2 of 22 Issue Data:2013-10-18 T E S T R E P O R T Test Report No. : TRE13090006 Oct 18, 2013 ______________________________________________________________________________________________ Date of issue Equipment under Test : 433MHz Remote Control Model /Type : ZABY1-4 Listed Models : / Applicant : Boly Media Communications (Asia) Co., Ltd. Address : WORKSHOP B9,6/F,BLOCK B,CAMBRIDGE PLAZA NO.188 SAN WAN ROAD, SHEUNG SHUI,N.T.,HONG KONG Manufacturer : Boly Media Communications (shenzhen) Co., Ltd. Address : 2F,Shanshui Building B,Yungu Innovation Industrial park,NO.1183,Liuxian Blvd, Nanshan District,Shenzhen..Guangdong,China Test Result according to the standards on page 4: Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: TRE13090006 Page 3 of 22 Issue Data:2013-10-18 Contents 1. TEST STANDARDS .................................................................. 4 2. SUMMARY ............................................................................. 5 2.1. General Remarks 5 2.2. Equipment Under Test 5 2.3. Short description of the Equipment under Test (EUT) 5 2.4. EUT operation mode 5 2.5. Configuration of Test System 5 2.6. Related Submittal(s) / Grant (s) 5 2.7. Modifications 5 2.8. NOTE 6 3. TEST ENVIRONMENT ............................................................... 7 3.1. Address of the test laboratory 7 3.2. Test Facility 7 3.3. Environmental conditions 8 3.4. Test Description 8 3.5. Statement of the measurement uncertainty 8 3.6. Equipments Used during the Test 8 4. TEST CONDITIONS AND RESULTS ............................................ 10 4.1. AC Power Conducted Emission(Not Applicable) 10 4.2. Radiated Emission 11 4.3. Occpied Bandwidth 16 4.4. Deactivation Time 17 4.5. Antenna Requirement 18 5. TEST SETUP PHOTOS OF THE EUT .......................................... 19 6. EXTERNAL AND INTERNAL PHOTOS OF THE EUT ....................... 20 Report No.: TRE13090006 Page 4 of 22 Issue Data:2013-10-18 1. TEST STANDARDS The tests were performed according to following standards: FCC Rules Part 15.231: Periodic operation in the band 40.66–40.70 MHz and above 70 MHz. ANSI C63.10-2009 : American National Standard for Testing Unlicensed Wireless Devices. Report No.: TRE13090006 Page 5 of 22 Issue Data:2013-10-18 2. SUMMARY 2.1. General Remarks Date of receipt of test sample : Sep 01, 2013 Testing commenced on : Sep 01, 2013 Testing concluded on : Oct 18,2013 2.2. Equipment Under Test Power supply system utilised Power supply voltage : ○ 120V / 60 Hz ○ 115V / 60Hz ○ 12 V DC ○ 24 V DC ● Other (specified in blank below) DC 12V from battery 2.3. Short description of the Equipment under Test (EUT) Operation Frequency: 433.92MHz Model number: ZABY1-4 Channel number: 1 channel Modulation type: ASK For more details, refer to the user’s manual of the EUT. 2.4. EUT operation mode The EUT has been tested under typical operating condition. 2.5. Configuration of Test System EUT Block Diagram of Test Setup 2.6. Related Submittal(s) / Grant (s) This submittal(s) (test report) is intended for FCC ID: Y2L00030 filing to comply with Section 15.231 of the FCC Part 15, Subpart C Rules. 2.7. Modifications No modifications were implemented to meet testing criteria. Report No.: TRE13090006 Page 6 of 22 Issue Data:2013-10-18 2.8. NOTE 1. The functions of the EUT are listed as below: Test Standards Reference Report Radio FCC…

Text truncated - open the document above for the full version.

Test Setup Photos of the EUT