Y3DA100USMART RFID DONGLE READER

User Guide ARETE POP Smart RFID Dongle Reader ARETE POP User Guide 2 / 17 Contents 1 Understanding ARETE POP ............................................................................. 3 1.1 ARETE POP at a Glance .................................................................................. 3 1.2 Accessories ...................................................................................................... 3 2 Basics ................................................................................................................. 4 2.1 Activating .......................................................................................................... 4 3 How to use iPhone application ........................................................................ 5 3.1 How to install application in your iPhone ...................................................... 5 3.2 Main Display ..................................................................................................... 6 3.3 Inventory ........................................................................................................... 7 4 How to use Android application ....................................................................... 8 4.1 How to install application in your Android Phone ........................................ 8 4.2 Main Display ..................................................................................................... 9 4.3 Inventory .......................................................................................................... 11 4.4 Additional Functions ..................................................................................... 12 ARETE POP User Guide 3 / 17 1 Understanding ARETE POP 1.1 ARETE POP at a Glance 1.2 Accessories ARETE POP User Guide 4 / 17 2 Basics 2.1 Activating 1. Insert ARETE POP RFID Reader to your Phone's headphone jack. 2. Turn volume up to 100%. 3. Switch the button to "On" in App. 4. LED indicator will be turned on in blue color. ARETE POP User Guide 5 / 17 3 How to use iPhone application 3.1 How to install application in your iPhone 1. Select App Store 2. Search ARETE POP application and install it. ARETE POP User Guide 6 / 17 3.2 Main Display - Switch: Turn on or off the Reader - Read Button: Start to read “Tag EPC” - Clear Button: Remove Read Record - Stop Button: Stop Tag Reading - Display: Show Tag Read Record ARETE POP User Guide 7 / 17 3.3 Inventory 1. Switch the button to "On" 2. Touch Read button to inventory tag continuously 3. Touch Stop button to finish inventory tag ARETE POP User Guide 8 / 17 4 How to use Android application 4.1 How to install application in your Android Phone 1. Connect your phone to Google Play Store. 2. Search “ARETE POP” and touch install. 3. ARETE POP app touch your phone. ARETE POP User Guide 9 / 17 4.2 Main Display - State bar : Pop Connect, Beep on/off, ARETE POP on/off, ARETE POP Battery, TX output power ARETE POP Connected ARETE POP On ARETE POP Beep off/on ARETE POP Tx power (20,21,22,23,24,25 dBm) ARETE POP Battery (1,10,20,30,40,50,60,70,80,90,100 %) ARETE POP User Guide 10 / 17 - On/Off Switch: Turn on or off the Reader - Start Reading Button: Start to read “Tag EPC” - Stop Read Button: Stop Tag Reading - Clear List Button: Remove Read Record - Display: Show Tag Read Record - Display rotation Rotation display 90 degree. - Additional Functions: Setting and functions Go to Setting Menu. ARETE POP User Guide 11 / 17 4.3 Inventory 1. Touch On/Off switch to power on the reader 2. Touch Start Reading button to inventory tag continuously 3. Touch Stop Read button to finish inventory tag ARETE POP User Guide 12 / 17 4.4 Additional Functions 1. Setting for output power ARETE POP User Guide 13 / 17 2. Set Beep 3. ReadTime On/Off Read on : 400ms , Read off : 100ms ARETE POP User Guide 14 / 17 4. Save the RCP log Mod You can save the RCP log data into a .csv(EXCEL) file Default = off SavePath = yourPhone/sdcard/ARETE/POPLOG_yourPhoneModel_time.csv 5. Reader information 1. click tab ‘information’ 2. Show Your ARETE POP information ARETE POP User Guide 15 / 17 Specifications PHYSICAL Dimension(WxLxH) 51 x 50 x 15 mm (without plug), 51 x 67.5 x 15 mm (with plug) Weight 30g Indication Power on LED(Blue), Charging LED(Red), Tagging(Blue blinking) Battery 360mAh Continuous Time 2.0 hours Charging Micro USB 5pin Color White RFID PERFORMANCE RFID Reader Chip PHYCHIPS PR9200 Air Protocol ISO 18000-6C/ EPC Class1 Gen 2 Interface 3.5mm stereo headphone jack Part No. & Operating Frequency A100-U: 917.1 ~ 926.9 MHz (US Band) A100-E: 865.1 ~ 867.9 MHz (EU Band) A100-J: 916.8 ~ 923.4 MHz (Japan Band) OS Apple iOS 5.0, Android 2.3.3 above (as of May 31 st 2013) Output (EIRP) 316mW(25dBm) for US, EU band 200mW(23dBm) for Japan band RFID Read Distance Up to 1.0m (depend on tags) Antenna Circularly Polarized Antenna Tag Read, Write, Lock, Kill USER ENVIRONMENT Operating Temp 0~40 ̊C Storage Temp -20~60 ̊C ARETE POP User Guide 16 / 17 Channel Number Table Channel Channel Frequency Channel Channel Frequency 1 917.10 MHz 26 922.10 MHz 2 917.30 MHz 27 922.30 MHz 3 917.50 MHz 28 922.50 MHz 4 917.70 MHz 29 922.70 MHz 5 917.90 MHz 30 922.90 MHz 6 918.10 MHz 31 923.10 MHz 7 918.30 MHz 32 923.30 MHz 8 918.50 MHz 33 923.50 MHz 9 918.70 MHz 34 923.70 MHz 10 918.90 MHz 35 923.90 MHz 11 919.10 MHz 36 924.10 MHz 12 919.30 MHz 37 924.30 MHz 13 919.50 MHz 38 924.50 MHz 14 919.70 MHz 39 924.70 MHz 15 919.90 MHz 40 924.90 MHz 16 920.10 MHz 41 925.10 MHz 17 920.30 MHz 42 925.30 MHz 18 920.50 MHz 43 925.50 MHz 19 920.70 MHz 44 925.70 MHz 20 920.90 MHz 45 925.90 MHz 21 921.10 MHz 46 926.10 MHz 22 921.30 MHz 47 926.30 MHz 23 921.50 MHz 48 926.50 MHz 24 921.70 MHz 49 926.70 MHz 25 921.90 MHz 50 926.90 MHz ARETE POP User Guide 17 / 17 For body worn operation, this device has been tested and meets the FCC RF exposure guidelines when a minimum distance of 0cm from user`s body. CAUTION : Any changes or modifications in construction of this device which…

Text truncated - open the document above for the full version.

PHYCHIPS Inc. #205 Migun Techno World 1, 533 Yongsan-dong, Yuseong-gu, Daejeon, Korea, 305-500 Date: July 15, 2013 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA LETTER OF AUTHORIZATION We, the undersigned, hereby authorize Harvey Sung of DIGITAL EMC CO., LTD. to act on our behalf in all manners relating to application for equipment authorization for FCC ID: Y3DA100U including signing of all documents relating to these matters. Any and all acts carried out by Harvey Sung of DIGITAL EMC CO., LTD. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from PHYCHIPS Inc. Sincerely, Laekyu Chang Manager

PHYCHIPS Inc. #205 Migun Techno World 1, 533 Yongsan-dong, Yuseong-gu, Daejeon, Korea, 305-500 Date: July 15, 2013 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA RE: Request of Confidentiality for FCCID: Y3DA100U To Whom It may Concern: Pursuant to Sections 0.457 and 0.459 of the Commission`s Rules(CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, PHYCHIPS Inc. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give PHYCHIPS Inc. temporary confidentiality of commercially sensitive information prior to product release. The requested permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT & SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Schematics 3 Operational Description 4 Part Lists SHORT-TERM 5 External Photos 6 Internal Photos 7 Test-Setup Photos 8 User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be public before the date of the Grant for this application. Sincerely, Laekyu Chang Manager

PHYCHIPS Inc. #205 Migun Techno World 1, 533 Yongsan-dong, Yuseong-gu, Daejeon, Korea, 305-500 Date: July 15, 2013 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA DECLARATION FOR ADDITIONAL FREQUENCY HOPPING REQUIREMENTS To whom it may concern: We hereby declare that the Bluetooth of Y3DA100U meet following FCC requirements of the Section 15.247(a)(1) : 1. The hopping sequence is pseudorandom. 2. All channels are used equally on average. 3. The receiver input bandwidth approximately equal the transmit bandwidth. 4. The receiver hop in sequence with the transmit signal. Sincerely, Laekyu Chang Manager

FCCID: Y3DA100U Copyright Ⓒ 2013, Digital EMC Co., Ltd. View 1 FCCID: Y3DA100U Copyright Ⓒ 2013, Digital EMC Co., Ltd. View 2 FCCID: Y3DA100U Copyright Ⓒ 2013, Digital EMC Co., Ltd. View 3

FCC ID: Y3DA100U Copyright Ⓒ 2013, DIGITAL EMC Co., Ltd. FCC ID SAMPLE LABEL & LOCATION LABELLING REQUIREMENTS PER §2.925 The Label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase The label is attached to this device by an adhesive. The adhesive is permanent type with strong strength. Bottom Side of Device

CONFIDENTIAL 1 TOP CONFIDENTIAL 2 BOT

FCCID: Y3DA100U Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page1 / 6 View 1 FCCID: Y3DA100U Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page2 / 6 View 2 FCCID: Y3DA100U Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page3 / 6 View 3 FCCID: Y3DA100U Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page4 / 6 View 4 FCCID: Y3DA100U Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page5 / 6 View 5 FCCID: Y3DA100U Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page6 / 6 View 6

Datasheet / QSA Antenna / UHF RFID AQUA920S-4510F-RDR Notes The contents of this datasheet are subject to change without notice. Please confirm the specifications and delivery conditions when placing your order. 1 DATASHEET AQUA920S Series Application UHF RFID Features High Efficiency High Front-Back Ratio Wide bandwidth Pb-free Condition RoHS Compliant ACTENNA Document Datasheet Type Quadrifilar Spiral Antenna Application UHF RFID Part No. AQUA920S-4510F-RDR Revision 0 Datasheet / QSA Antenna / UHF RFID AQUA920S-4510F-RDR Notes The contents of this datasheet are subject to change without notice. Please confirm the specifications and delivery conditions when placing your order. 2 Table of Content 1.Features 3 2. Specifications 3 3. Measurement Result 4 3.1 E-Plane 4 3.2 H-Plane 5 4. Soldering 6 5. Reliability 6 Datasheet / QSA Antenna / UHF RFID AQUA920S-4510F-RDR Notes The contents of this datasheet are subject to change without notice. Please confirm the specifications and delivery conditions when placing your order. 3 1. FEATURES UHF RFID Reader Circular Polarization Antenna Square Quadrifilar Sprial Antenna (* Patent Registration) Wide Beamwidth, Wide Bandwidth Small Antenna Element Low Weight, Compact Size Low Frequency Shift by Platform Size Immunity from User Proximity and Handling Easy Application and Save Development Time OEM / ODM 2. SPECIFICATIONS 1. Electrical Specifications No Item Min Typ. Max Remark 1 Operating Frequency [MHz] 917~924 2 Polarization RHCP 3 Peak Gain [dBic] -5.5 -3.5 4 Axial Ratio <1.5 5 Bandwidth (-10dB R.L.) [MHz] 200 6 Beamwidth (degrees) >130 7 Impedance (Ω) 50 2. Mechanical Specifications No Item Spec. Remark 1 Dimensions (L x W x H) 45 x 45 x 10 mm 3 2 Operating Temperature -40 ~ +90 °C Datasheet / QSA Antenna / UHF RFID AQUA920S-4510F-RDR Notes The contents of this datasheet are subject to change without notice. Please confirm the specifications and delivery conditions when placing your order. 4 3. MEASUREMENT RESULT 3-1 E-Plane Datasheet / QSA Antenna / UHF RFID AQUA920S-4510F-RDR Notes The contents of this datasheet are subject to change without notice. Please confirm the specifications and delivery conditions when placing your order. 5 3-2 H-Plane Datasheet / QSA Antenna / UHF RFID AQUA920S-4510F-RDR Notes The contents of this datasheet are subject to change without notice. Please confirm the specifications and delivery conditions when placing your order. 6 4 SOLERING Manual Soldering (By Iron) – Pb free Soldering Temperature : 300°C ±5°C, 5sec max. (Solder : Sn/Ag/Cu:96.5/3.0/0.5) Must comply with above soldering condition to prevent from degradation of antenna performance. 5 RELIABILITY No Item Test Condition Requirement 1 Drop Test 1. Place antenna on set 2. 1.5 m height 3. Drop 5 times 1. No visible defect 2. S11 satisfy 2 Vibration Test 1. 5-55-5Hz, 1 octive/min Amp. = 1.5mm, acceleration=2g Crossover Freq.=18Hz, Holdtime=2H.R 1. No visible defect 2. S11 satisfy 3 Humidity 1. 60°C, 95%RH, 96Hr 1. No visible defect 2. S11 satisfy 4 Thermal Shock 1. +80°C(30min)5min-40°C(30min) 2. 10 cycle 1. No visible defect 2. S11 satisfy 5 High Temperature Resistance 1. +90°C, 96Hr 1. No visible defect 2. S11 satisfy 6 Low Temperature Resistance 1. -40°C, 96Hr 1. No visible defect 2. S11 satisfy 7 Adhesion Strength of Soldering 1. Used of pull push gauge 1. Spec (min. 5kgf)

http://www.emc2000.co.kr EMCComplianceLtd.480-5 Sin-dong, Yeongtong-gu, Suwon-city, Gyeonggi-do, 443-390, Korea TEL: 82 31 336 9919FAX: 82 505 299 8311 This test report shall not be reproduced, except in full, without the written approval. Report No.: EMC-FCC-A0006-1 Page: 1 of 59 SAR TEST REPORT In the configuration tested, the EUT complied with the standards specified above. This report details the results of the testing carried out on one sample, the results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all pr oducts in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system com plies with all relevant standards. Any mention of EMC Compliance Ltd. or testing done by EMC comp liance Ltd. in connection with distribution or use of the product described in this report must be appro ved by EMC ComplianceLtd. in writing. Date of receipt: 2013. 08. 09 Date of testing: 2013. 08. 09Issued date: 2013. 08. 13 Tested by: Chang-won, Lee Approved by: Sang-Hun, Yu Test report No:EMC-FCC-A0006-1 Type of Equipment:Smart RFID Dongle Reader Model Name:A100-U Applicant: FCCID: PHYCHIPS Inc. Y3DA100U Test standards: FCC OET Bulletin 6 supplement C IEEE 1528 ,2003 IEC 62209 :2006/IEC62209-2 :2010 RSS-102 Max. SAR(1g) 0.652 W/kg Test result:Complied http://www.emc2000.co.kr EMCComplianceLtd.480-5 Sin-dong, Yeongtong-gu, Suwon-city, Gyeonggi-do, 443-390, Korea TEL: 82 31 336 9919FAX: 82 505 299 8311 This test report shall not be reproduced, except in full, without the written approval. Report No.: EMC-FCC-A0006-1 Page: 2 of 59 Contents 1. Applicant information........................................................................................................................... 3 2. Laboratory information........................................................................................................................ 4 3. Identification of Sample......................................................................................................................... 5 4.Test Result Summary............................................................................................................................. 6 5. Report Overview................................................................................................................................... 6 6. Test Lab Declaration or comments......................................................................................................... 6 7. Applicant Declaration or Comments...................................................................................................... 6 8. Measurement Uncertainty..................................................................................................................... 7 9. The SAR Measurement System............................................................................................................. 8 9.1 Isotropic E-field Probe EX3DV4................................................................................................... 9 9.2 SAM Twin Phantom..................................................................................................................... 10 9.3 Device Holder for Transmitters................................................................................................... 11 10. Measurement for Tissue Simulant Liquid.......................................................................................... 12 11. SAR System Validation...................................................................................................................... 13 12. Operation Configurations.................................................................................................................. 14 13. SAR Measurement Procedures.......................................................................................................... 15 14. Test Equipment Information.............................................................................................................. 17 15. SAR Test Results............................................................................................................................... 19 16. Validation Test Results....................................................................................................................... 20 17. Test Results........................................................................................................................................ 21 Annex A. Photographs.......................................................................................................................... 28 Annex B. Calibration certificate........................................................................................................... 35 http://www.emc2000.co.kr EMCComplianceLtd.480-5 Sin-dong, Yeongtong-gu, Suwon-city, Gyeonggi-do, 443-390, Korea TEL: 82 31 336 9919FAX: 82 505 299 8311 This test report shall not be reproduced, except in full, without the written approval. Report No.: EMC-FCC-A0006-1 Page: 3 of 59 1. Applicant information Applicant:PHYCHIPS Inc. Address:#205 Migun Techno World 1, 533 Yongsan-dong, Yuseong-gu, Daejeon, Korea, 305-500 Telephone:+82-42-864-2402 Fax:+82-42-864-2403 E-mail:[email protected] Contact name:Laekyu Chang Manufacturer:PHYCHIPS Inc. Address:#205 Migun Techno World 1, 533 Yongsan-dong, Yuseong-gu, Daejeon, Korea, 305-500 http://www.emc2000.co.kr EMCComplianceLtd.480-5 Sin-dong, Yeongtong-gu, Suwon-city, Gyeonggi-do, 443-390, Korea TEL: 82 31 336 9919FAX: 82 505 299 8311 This test report shall not be reproduced, except in full, without the written approval. Report No.: EMC-FCC-A0006-1 Page: 4 of 59 2. Laboratory information Address EMC compl…

Text truncated - open the document above for the full version.

FCC ID : Y3DA100U DEMC1306-01803 Report No.: DRTFCC1307-0695 TRF-RF-212(00)101214 Page 2 / 29 Copyright ○ C 2013, Digital EMC Co., Ltd. Table of Contents 1. General Information ................................................................................................ 3 1.1 Testing Laboratory ........................................................................................................... 3 1.2 Details of Applicant .......................................................................................................... 3 1.3 Description of EUT ........................................................................................................... 3 1.4. Declaration by the manufacturer ................................................................................... 3 1.6. Test Equipment List ........................................................................................................ 4 1.7. Summary of Test Results ................................................................................................ 5 1.8 Conclusion of worst-case and operation mode ............................................................ 6 1.9 Test report revision .......................................................................................................... 6 2. Radiated Spurious Emissions and Conducted Spurious Emission ................... 7 2.1. Test Setup ......................................................................................................................... 7 2.2. Limit .................................................................................................................................. 7 2.3. Test Procedures .............................................................................................................. 8 2.3.1. Test Procedures for Radiated Spurious Emissions ................................................ 8 2.3.2. Test Procedures for Conducted Spurious Emissions ............................................ 8 2.4. Test Results ...................................................................................................................... 9 2.4.1. Radiated Emission ...................................................................................................... 9 2.4.2. Conducted Spurious Emissions ............................................................................. 10 3. Carrier Frequency Separation .............................................................................. 16 3.1. Test Setup ...................................................................................................................... 16 3.2. Limit ................................................................................................................................ 16 3.3 Test Procedure:............................................................................................................... 16 3.4 Test Results: ................................................................................................................... 16 4. Number of Hopping Frequencies ...................................................................... 17 4.1. Test Setup ...................................................................................................................... 17 4.2. Limit ................................................................................................................................ 17 4.3 Test Procedure:............................................................................................................... 17 4.4 Test Results: ................................................................................................................... 17 5. 20dBc BW ............................................................................................................... 18 5.1. Test Setup ....................................................................................................................... 18 5.2. Limit ................................................................................................................................ 18 5.3. Test Procedure .............................................................................................................. 18 5.4. Test Results .................................................................................................................... 18 6. Time of Occupancy (Dwell Time) ......................................................................... 21 6.1. Test Setup ....................................................................................................................... 21 6.2. Limit ................................................................................................................................ 21 6.3. Test Procedure .............................................................................................................. 21 6.4. Test Results .................................................................................................................... 21 7. Maximum Peak Output Power Measurement ...................................................... 22 7.1. Test Setup ....................................................................................................................... 22 7.2. Limit ................................................................................................................................ 22 7.3. Test Procedure ............................................................................................................... 22 7.4. Test Results .................................................................................................................... 22 8. Transmitter AC Power Line Conducted Emission .............................................. 25 8.1. Test Setup ....................................................................................................................... 25 8.2. Limit .........................…

Text truncated - open the document above for the full version.

FCC ID: Y3DA100U Copyright Ⓒ 2013, Digital EMC Co., Ltd. EUT Axis information X Axis Y Axis Z Axis FCC ID: Y3DA100U Copyright Ⓒ 2013, Digital EMC Co., Ltd. Test Setup Photo of Radiated Measurement (0.009 ~ 30MHz) FCC ID: Y3DA100U Copyright Ⓒ 2013, Digital EMC Co., Ltd. Test Setup Photo of Radiated Measurement (30 ~ 1000MHz) FCC ID: Y3DA100U Copyright Ⓒ 2013, Digital EMC Co., Ltd. Test Setup Photo of Radiated Measurement (1 ~ 10GHz) FCC ID: Y3DA100U Copyright Ⓒ 2013, Digital EMC Co., Ltd. Test Setup Photo of Conducted Emissions