Y9P-PEBBLEV2-433Remote Control

1 K SPIDER PEBBLE1-2 TECHNOLOGY A VAILABLE ON THE ABOVE SYSTEMS TECHNOLOGIE DISPONIBLE SUR LES SYSTÈMES CI-DESSUS BULBLITE SYSTE M Bulb l i t e B U L B SYSTE M Bulb SPIDE R SYSTE M S p i d e r 23 DESCRIPTION DU PRODUIT Français PRÉSENTATION DU PRODUIT MODE D’UTILISATION Effet bougie - scintillement des LEDs Défilement de toutes les couleurs Effet bougie - scintillement des LEDs CANDLE CANDLE BLEU RAINBOW BOUTON COMMANDE BOUTON SYNCHRONISATION CHOISIR UNE COULEUR OU UN MODE (AMBIANCE) ALLUMER ET ÉTEINDRE LA LUMIÈRE CR2032 C R 2 0 3 2 BOUTON COMMANDE BOUTON COMMANDE Un appui court sur ce bouton allume, change la couleur ou le mode puis éteint le luminaire. La nouvelle Pebble vous permet de synchroniser les luminaires Smart&Green. 20 m = = SYNCHRONISER LES LUMINAIRES CYCLE DE 7 COULEURS ET 3 MODES OFF Pebble2 • S&G • 09/12/2013 PRÉCAUTIONS D’UTILISATION Lisez attentivement ce mode d’emploi avant d’utiliser l’appareil et conservez-le pour usage ultérieur. Utiliser la télécommande conformément aux instructions données dans cette notice, faute de quoi aucune garantie ne pourra être appliquée. • Ne pas plonger dans l’eau • Ne pas l’exposer longuement au soleil • Ne pas l’exposer au feu • La garder hors de portée des jeunes enfants • En cas de non utilisation prolongées, otez la pile de la télécommande • En cas de remplacement, utiliser la référence de pile fournie en fin de notice • Ne pas tenter de la démonter > Pour toute questions relatives au bon fonctionnement de ce produit, contactez votre point de vente. Pile : 3V Lithium CR2032 Durée de vie (pile) : 2 ans (usage standard) Fréquence radio : 433 MHz Portée radio : 20m maximum (en portée directe) Résistance aux chocs et UV Protection : IP55 (peut être utilisée sous la pluie) Température d’utilisation conseillée : 0 à 40°C Garantie du produit : 1an INFORMATIONS TECHNIQUES CARACTÉRISTIQUES TECHNIQUES CONFORMITÉ A LA REGLEMENTATION QUE FAIRE EN CAS DE PROBLÈMES ? RÉSISTANT AUX ÉCLABOUSSURES Dans l’union Européenne (conformément à la directive DEEE 2002/96/CE), voire aussi d’autres régions, vous avez l’obligation, en fin de vie, de retourner ce produit à un point de collecte pour recyclage. En effet, ce produit n’est pas un déchet ménager ordinaire, gérer ainsi sa fin de vie nous permet de préserver notre environnement et limiter l’utilisation de nos ressources naturelles. Pour toute information complémentaire, contactez Smart & Green. IPW Europe déclare le présent produit conforme aux directives européennes suivantes : RTTE (1999/5/CE), LVD (2006/95/CE), ROHS (2011/65/EU), EMC (2004/108/CE) and Battery (2006/66/EC). La déclaration de conformité correspondante est disponible sur notre site internet (www.smartandgreen.eu). TÉLECOMMANDE- RADIO VOUS NE PARVENEZ PAS À CONTRÔLER UN (OU PLUSIEURS) LUMINAIRES. • Vérifiez qu’il s’agit bien d’un produit compatible avec la technologie Pebble. • Commencez par recharger votre ampoule ou système lumineux si ce n’est déjà fait. • Lors de la première utilisation, vous devez appuyer une première fois sur un bouton de l’ampoule pour activer la transmission radio. • Pour une commande à distance, placez-vous à portée radio. • Si le problème persite, reportez-vous à la notice du luminaire pour l’éteindre et le rallumer, voire pour restaurer sa configuration d’origine. Un appui court sur ce bouton répète la dernière commande. BOUTON SYNCHRONISATION = 45 PRODUCT DESCRIPTION English PRODUCT PRESENTATION OPERATING MODES Candle effect - LEDs flicker Scrolls through all the colours Candle effect - LEDs flicker CANDLE CANDLE BLUE RAINBOW CONTROL BUTTON SYNCHRONIZATION BUTTON SELECTING A COLOUR MODE (AMBIENCE) SWITCHING ON/OFF CR2032 C R 2 0 3 2 CONTROL BUTTON CONTROL BUTTON Briely press this button to turn the light on in white light, or changes the light color or mode then switch off the light. The new Pebble remote control easily synchronizes your Smart & Green products. 20 m = = SYNCHRONISING LIGHTS 7-COLOUR CYCLE AND 3 MODES OFF Pebble2 • S&G • 02/12/2013 PRECAUTIONS Carefully read and save these instructions before using the product. Use the remote control in accordance with the instructions given in this user manual. Failure to do so will invalidate your guarantee. • Do not immerse in water. • Do not subject to prolonged exposure to the sun. • Do not expose to fire. • Keep out of reach of children. • When not in use for an extended period of time, remove the battery from the remote control. • When replacing the battery, use the battery reference provided at the end of this user manual. • Do not attempt to dismantle. > For any questions relating to the proper functioning of this product, please contact your point of sale. Battery: 3V Lithium CR2032 Life (battery): 2 ans (usage standard) Radio frequency: 433 MHz Radio range: 20m maximum (en portée directe) Shock and UV resistant Protection: IP44 (can be used in rain) Recommended operating temperature: 0 to 40°C Product guarantee: 1 year TECHNICAL INFORMATION TECHNICAL CHARACTERISTICS COMPLIANCE TROUBLESHOOTING GUIDE YOU ARE UNABLE TO CONTROL ONE (OR SEVERAL) LIGHT(S). • Verify that your product is indeed compatible with the new Pebble remote control. • Start by recharging your light module or system if it is not already done. • When using for the first time, you must first press one of the bulb’s buttons to activate the radio transmission. • For remote control, stand within radio range. • If the problem persists, refer to the light user manual to switch it off and on, or restore its original settings. Briefly press this button to repeat the previous command. SYNCHRONIZATION BUTTON = SPLASH RESISTANT RADIO REMOTE CONTROL In the European Union (in accordance with Directive DEEE 2002/96/EC), and also in other regions, you must return this product to a recycling collection point at the end of its life. As this product is not ordinary household waste, managing its end of life helps us protect our environment and limit the use of our natural resources. For further informa…

Text truncated - open the document above for the full version.

IPW China Limited Address: 5/F, Block B3, Xujingchang Industrial Park, Fuyong, Shenzhen, GuangDong, China Tel: 86-075533816768 Fax: 86-075533816767 2013-12-14 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Confidentiality Request regarding application for certification of FCC ID: Y9P-PEBBLEV2-433 We hereby request confidential treatment of information accompanying this application as outlined below: - Schematics Diagram - Block Diagram - Operation description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s name / title : Jack Qin / Purchaser Contact information / address : 5/F, Block B3, Xujingchang Industrial Park, Fuyong, Shenzhen, GuangDong, China Tel: 86-075533816768 Fax: 86-075533816767

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: Y9P-PEBBLEV2-433 Report No.:LCS1311281095TF This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 3 1. EXTERIOR PHOTOGRAPHS OF EUT Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: Y9P-PEBBLEV2-433 Report No.:LCS1311281095TF This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 3 Fig.3 Fig.4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: Y9P-PEBBLEV2-433 Report No.:LCS1311281095TF This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 3 Fig.5 Fig.6

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD FCC ID:Y9P-PEBBLEV2-433 Report No.:LCS1311281095TF This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1 LABEL AND LOCATION Label And Location

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: Y9P-PEBBLEV2-433 Report No.:LCS1311281095TF This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 3 1. INTERIOR PHOTOGRAPHS OF EUT Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: Y9P-PEBBLEV2-433 Report No.:LCS1311281095TF This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 3 Fig.3 Fig.4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: Y9P-PEBBLEV2-433 Report No.:LCS1311281095TF This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 3 Fig.5 Fig.6 Antenna

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: Y9P-PEBBLEV2-433 Report No.: LCS1311281095TF This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 25 FCC TEST REPORT For IPW China Limited Remote Control Model No.: Pebble 1-2 Prepared for : IPW China Limited Address : 5/F, Block B3, Xujingchang Industrial Park, Fuyong, Shenzhen, GuangDong, China Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 1/F., Xingyuan Industrial Park, Tongda Road, Bao’an Avenue, Bao’an District, Shenzhen, Guangdong, China Date of receipt of test sample : December 05, 2013 Number of tested samples : 1 Serial number : Prototype Date of Test : December 05, 2013– December 14, 2013 Date of Report : December 14, 2013 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: Y9P-PEBBLEV2-433 Report No.: LCS1311281095TF This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 25 FCC TEST REPORT FCC CFR 47 PART 15 C(15.231): 2012 Report Reference No. .............. : LCS1311281095TF Date of Issue ................................ : December 14, 2013 Testing Laboratory Name ......... : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ........................................ : 1/F., Xingyuan Industrial Park, Tongda Road, Bao’an Avenue, Bao’an District, Shenzhen, Guangdong, China Testing Location/ Procedure ........ : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ....................... : IPW China Limited Address ........................................ : 5/F, Block B3, Xujingchang Industrial Park, Fuyong, Shenzhen, GuangDong, China Test Specification Standard ....................................... : FCC CFR 47 PART 15 Subpart C : 2012, ANSI C63.4-2003 Test Report Form No. ................ : LCSEMC-1.0 TRF Originator ............................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF .................................. : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test Item Description. ............... : Remote Control Trade Mark .................................. : Smart&Green Model/ Type reference ................. : Pebble 1-2 Ratings ......................................... : DC 3V by Battery Result ......................................... : Positive Compiled by: Supervised by: Approved by: Jacky Li/ File administrators Fox Zhang/ Technique principal Gavin Liang/ Manager SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: Y9P-PEBBLEV2-433 Report No.: LCS1311281095TF This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 25 FCC--TEST REPORT Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCS1311281095TF December 14, 2013 Date of issue Type / Model........................... : Pebble 1-2 EUT......................................... : Remote Control Applicant............................... : IPW China Limited Address.................................. : 5/F, Block B3, Xujingchang Industrial Park, Fuyong, Shenzhen, GuangDong, China Telephone............................... : / Fax.......................................... : / Manufacturer........................ : IPW China Limited Address................................... : 5/F, Block B3, Xujingchang Industrial Park, Fuyong, Shenzhen, GuangDong, China Telephone............................... : / Fax.......................................... : / Factory................................... : IPW China Limited Address................................... : 5/F, Block B3, Xujingchang Industrial Park, Fuyong, Shenzhen, GuangDong, China Telephone............................... : / Fax.......................................... : / SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: Y9P-PEBBLEV2-433 Report No.: LCS1311281095TF This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 4 of 25 TABLE OF CONTENTS 1. GENERAL INFORMATION .................................................................................................................................. 5 1.1. DESCRIPTION OF DEVICE (EUT) ........................................................................................................................... 5 1.2. OBJECTIVE ............................................................................................................................................................ 5 1.3. ENVIRONMENTAL CONDITIONS............................................................................................................................. 5 1.4. HOST SYSTEM CONFIGURATION LIST AND DETAILS ............................................................................................. 6 1.5. EXTERNAL I/O PORT ............................................................................................................................................. 6 1.6. EUT OPERATION .................................................................................................................................................. 6 1.7. ANTENNA SYSTEM ..............................................…

Text truncated - open the document above for the full version.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: Y9P-PEBBLEV2-433 Report No.:LCS1311281095TF _______________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 1 1. TEST SETUP PHOTOGRAPHS 1.1. Photo of Radiated Emissions Measurement (X Position) Fig.1 Fig.2