YA7-AS300Compact Asset Tracker

AS300 / Compact Asset Tracker User Manual V02 July 05, 2024 1 1 User Manual ATrack Technology AS300 Table of Contents 1. Notification ................................................................................................................................. 2 1.1. Disclaimer .......................................................................................................................... 2 1.2. Copyright ........................................................................................................................... 2 1.3. Warning ............................................................................................................................. 2 1.4. FCC ID ................................................................................................................................ 2 1.5. FCC Compliance Statement ............................................................................................... 2 1.6. IC Compliance Statement .................................................................................................. 3 1.7. Manufacturer .................................................................................................................... 3 1.8. CE Representatives (CE Cert. have been processing) ........................................................ 3 1.9. Document Amendments ................................................................................................... 3 1.10. Caution .............................................................................................................................. 4 2. Product Specifications ................................................................................................................ 5 3. Installation .................................................................................................................................. 7 3.1. Package Content ................................................................................................................ 7 3.2. Optional Accessory ............................................................................................................ 7 3.3. SIM Card Installation ......................................................................................................... 7 3.4. Configuration Port and Setting .......................................................................................... 8 3.5. LED Indication for Battery Capacity ....................................... 9 4. Configuration ............................................................................................................................... 9 4.1. Connecting AS300 Using HyperTerminal ......................................................................... 10 2 2 User Manual ATrack Technology AS300 1. Notification 1.1. Disclaimer This document, and all other related products, including device, firmware, and software, are exclusively developed by ATrack Technology Inc. Due to the continuous developments and improvements of device functionalities, changes in the protocol, specification, and firmware functions are subjects to change without notice. ATrack Technology Inc. reserves the right to modify all documentations based on its own timelines. Document modification notices will be released to ATrack Technology Inc.’s customers upon completion. ATrack Technology Inc. products are not intended to be used as life support or rescue equipment. ATrack Technology Inc. is not liable for any loss or injury caused by using or referencing to any of its products. Any possible means of using or integrating ATrack Technology Inc. products shall be avoided in such applications. 1.2. Copyright © ATrack Technology Inc. All Rights Reserved ATrack Technology Inc. holds all parts of intellectual rights applicable in the copyright laws in all the countries. Any and all contents of this document shall not be exposed, delivered, and/or disclosed to non-authorized 3 rd party without any form of approval and consent from ATrack Technology Inc. Any form of, including but not limited to, verbal, duplicate, or internet sharing, of releasing or exposing information to an unauthorized party shall be prohibited. ATrack Technology Inc. reserves the rights of litigation in the violation of copyright laws. 1.3. Warning 1. Connecting of the input wires can be hazardous to both the installer and your vehicle’s electrical system if not done by an installer. This document assumes you are aware of the inherent dangers of working in and around a vehicle and have qualified knowledge of understanding electrical behaviors. An experienced technician with knowledge of installing audio system, relay wiring, or any electronic system in vehicle is highly recommended to perform installation. 2. While doing any operation without top cover, please wear anti-static gloves/rings to avoid the damage of Electrical Static Discharge. 3. There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions and your local government’s recycling or disposal directives. 1.4. FCC ID FCC ID：YA7-AS300 1.5. FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio c…

Text truncated - open the document above for the full version.

8F., No. 13, Ln. 120, Sec. 1, Neihu Rd., Neihu Dist. Taipei Taiwan 11493

8F., No. 13, Ln. 120, Sec. 1, Neihu Rd., Neihu Dist. Taipei

Appendix No.: EP-2406T082-1 APPENDIX-EUT PHOTOS Project No.: 2406T082 Page 1 of 21 Appendix No.: EP-2406T082-1 APPENDIX-EUT PHOTOS Project No.: 2406T082 Page 2 of 21 Appendix No.: EP-2406T082-1 APPENDIX-EUT PHOTOS Project No.: 2406T082 Page 3 of 21 Appendix No.: EP-2406T082-1 APPENDIX-EUT PHOTOS Project No.: 2406T082 Page 4 of 21 Appendix No.: EP-2406T082-1 APPENDIX-EUT PHOTOS Project No.: 2406T082 Page 5 of 21 Appendix No.: EP-2406T082-1 APPENDIX-EUT PHOTOS Project No.: 2406T082 Page 6 of 21

Appendix No.: EP-2406T082-1 APPENDIX-EUT PHOTOS Project No.: 2406T082 Page 7 of 21 Appendix No.: EP-2406T082-1 APPENDIX-EUT PHOTOS Project No.: 2406T082 Page 8 of 21 Appendix No.: EP-2406T082-1 APPENDIX-EUT PHOTOS Project No.: 2406T082 Page 9 of 21 Appendix No.: EP-2406T082-1 APPENDIX-EUT PHOTOS Project No.: 2406T082 Page 10 of 21 Appendix No.: EP-2406T082-1 APPENDIX-EUT PHOTOS Project No.: 2406T082 Page 11 of 21 Appendix No.: EP-2406T082-1 APPENDIX-EUT PHOTOS Project No.: 2406T082 Page 12 of 21 Pogo pin Appendix No.: EP-2406T082-1 APPENDIX-EUT PHOTOS Project No.: 2406T082 Page 13 of 21 Appendix No.: EP-2406T082-1 APPENDIX-EUT PHOTOS Project No.: 2406T082 Page 14 of 21 Appendix No.: EP-2406T082-1 APPENDIX-EUT PHOTOS Project No.: 2406T082 Page 15 of 21 Appendix No.: EP-2406T082-1 APPENDIX-EUT PHOTOS Project No.: 2406T082 Page 16 of 21 Appendix No.: EP-2406T082-1 APPENDIX-EUT PHOTOS Project No.: 2406T082 Page 17 of 21 Appendix No.: EP-2406T082-1 APPENDIX-EUT PHOTOS Project No.: 2406T082 Page 18 of 21 Appendix No.: EP-2406T082-1 APPENDIX-EUT PHOTOS Project No.: 2406T082 Page 19 of 21 Appendix No.: EP-2406T082-1 APPENDIX-EUT PHOTOS Project No.: 2406T082 Page 20 of 21 Appendix No.: EP-2406T082-1 APPENDIX-EUT PHOTOS Project No.: 2406T082 Page 21 of 21

Report No.: BTL-FCCP-2-2406T082 Project No.: 2406T082 Page 1 of 8 Report Version: R00 FCC RF Exposure Report FCC ID: YA7-AS300 Report No. : BTL-FCCP-2-2406T082 Equipment : Compact Asset Tracker Model Name : AS300 Brand Name : ATrack Applicant : ATrack Technology Inc. Address : 8F., No. 13 Ln. 120, Sec. 1, Neihu Rd., Neihu Dist., Taipei City 11493, Taiwan Standard(s) : 47 CFR § 2.1091 IEEE C95.1 Date of Receipt : 2024/6/26 Date of Test : 2024/7/3 ~ 2024/8/1 Issued Date : 2024/9/12 The above equipment has been tested and found in compliance with the requirement of the above standards by BTL Inc. Prepared by : Eddie Lee, Engineer Approved by : Jerry Chuang, Supervisor BTL Inc. No.18, Ln. 171, Sec. 2, Jiuzong Rd., Neihu Dist., Taipei City 114, Taiwan Tel: +886-2-2657-3299 Fax: +886-2-2657-3331 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-2-2406T082 Project No.: 2406T082 Page 2 of 8 Report Version: R00 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL assumes no responsibility for the data provided by the Customer, any statements, inferences or generalizations drawn by the customer or others from the reports issued by BTL. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-2-2406T082 Project No.: 2406T082 Page 3 of 8 Report Version: R00 REVISION HISTORY Report No. Version Description Issued Date Note BTL-FCCP-2-2406T082 R00 Original Report. 2024/9/12 Valid Report No.: BTL-FCCP-2-2406T082 Project No.: 2406T082 Page 4 of 8 Report Version: R00 1. LIMITS According to § 1.1310 Radiofrequency radiation exposure limits. (a) Specific absorption rate (SAR) shall be used to evaluate the environmental impact of human exposure to radiofrequency (RF) radiation as specified in § 1.1307(b) of this part within the frequency range of 100 kHz to 6 GHz (inclusive). (b) The SAR limits for occupational/controlled exposure are 0.4 W/kg, as averaged over the whole body, and a peak spatial-average SAR of 8 W/kg, averaged over any 1 gram of tissue (defined as a tissue volume in the shape of a cube). Exceptions are the parts of the human body treated as extremities, such as hands, wrists, feet, ankles, and pinnae, where the peak spatial-average SAR limit for occupational/controlled exposure is 20 W/kg, averaged over any 10 grams of tissue (defined as a tissue volume in the shape of a cube). Exposure may be averaged over a time period not to exceed 6 minutes to determine compliance with occupational/controlled SAR limits. (c) The SAR limits for general population/uncontrolled exposure are 0.08 W/kg, as averaged over the whole body, and a peak spatial-average SAR of 1.6 W/kg, averaged over any 1 gram of tissue (defined as a tissue volume in the shape of a cube). Exceptions are the parts of the human body treated as extremities, such as hands, wrists, feet, ankles, and pinnae, where the peak spatial-average SAR limit is 4 W/kg, averaged over any 10 grams of tissue (defined as a tissue volume in the shape of a cube). Exposure may be averaged over a time period not to exceed 30 minutes to determine compliance with general population/uncontrolled SAR limits. (e) Limits for Maximum Permissible Exposure (MPE) to radiofrequency electromagnetic fields (Table 1). Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (i) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *(100) ≤6 3.0-30 1842/f 4.89/f *(900/f 2 ) <6 30-300 61.4 0.163 1.0 <6 300-1.500 f/300 <6 1.500-100.000 5 <6 (ii) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) <30 1.34-30 824/f 2.19/f *(180/f 2 ) <30 30-300 27.5 0.073 0.2 <30 300-1.500 f/1500 <30 1.500-100.000 1.0 <30 f = frequency in MHz. * = Plane-wave equivalent power density. Report No.: BTL-FCCP-2-2406T082 Project No.: 2406T082 Page 5 of 8 Report Version: R00 2. APPLIED EXEMPTION CRITERIA Refer to KDB 447498 D04, ticked item is applied: For RF Exposure Test Exemptions for Single Source: ☐ 1-mW Test Exemption Per § 1.1307(b)(3)(i)(A), a single RF source is exempt RF device (from the requirement to show data demonstrating compliance to RF exposure limits, as previously mentioned) if the available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption applies to all operating configurations and exposure conditions, for the frequency range 100 kHz to 100 GHz, regardless of fixed, mob…

Text truncated - open the document above for the full version.

ຐ཰ࣽިמҽԖज़Ϧљ Unictron Technologies Corporation Website:www.unictron.com THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES W ITHOUT PERMISSION Prepared by : Jane Designed by :James Checked by : Mike Approved by烉Herbert TITLE烉3.2 x 1.6 x 0.5(mm) WiFi/Bluetooth Ceramic Chip Antenna (AA055U) Engineering Specification DOCUMENT H2U34W1H1Z0700 REV. NO. D PAGE 1 OF 11 3.2 x 1.6 x 0.5 (mm) WiFi/Bluetooth Ceramic Chip Antenna (AA055U) Engineering Specification 1. Product Number 2. Features *Stable and reliable in performances *Low profile, compact size *RoHS 2.0 compliance *SMT processes compatible *AEC-Q200 compliant 3. Applications *ISM 2.4 GHz applications *ZigBee/BLE applications *Bluetooth earphone systems *Hand-held devices when WiFi / Bluetooth functions are needed, e.g., Smart phones *IEEE802.11 b/g/n *Wireless PCMCIA cards or USB dongles 4. Description Unictron’s AA055U ceramic chip antenna is designed for ISM 2.4GHz applications, covering frequencies 2400~2500MHz. Fabricated with proprietary design and processes, AA055U shows excellent performance and is fully compatible with SMT processes which can decrease the assembly cost and improve device’s quality and consistency. H 2 1 4 W H Z 7 0 U 3 0 1 0 ຐ཰ࣽިמҽԖज़Ϧљ Unictron Technologies Corporation Website:www.unictron.com THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES W ITHOUT PERMISSION Prepared by : Jane Designed by :James Checked by : Mike Approved by烉Herbert TITLE烉3.2 x 1.6 x 0.5(mm) WiFi/Bluetooth Ceramic Chip Antenna (AA055U) Engineering Specification DOCUMENT H2U34W1H1Z0700 REV. NO. D PAGE 2 OF 11 5. Layout Guide & Electrical Specifications 5-1. Layout Guide (unit:mm) Solder Land Pattern: The solder land pattern (gold marking areas) is shown below. Recommendation on matching circuit will be provided according to customer’s installation conditions. ຐ཰ࣽިמҽԖज़Ϧљ Unictron Technologies Corporation Website:www.unictron.com THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES W ITHOUT PERMISSION Prepared by : Jane Designed by :James Checked by : Mike Approved by烉Herbert TITLE烉3.2 x 1.6 x 0.5(mm) WiFi/Bluetooth Ceramic Chip Antenna (AA055U) Engineering Specification DOCUMENT H2U34W1H1Z0700 REV. NO. D PAGE 3 OF 11 5-2. Electrical Specifications (Evaluation Board Dimensions: 80 x 40 mm 2 ) 5-2-1. Electrical Table Characteristics Specifications Unit Outline Dimensions 3.2 x 1.6 x 0.5 mm Ground Plane Dimensions 80 x 40 mm Working Frequency 2400~2500 MHz VSWR (@ center frequency)* 2 Max. Characteristic Impedance 50 : Polarization Linear Polarization Peak Gain (@2442 MHz) 1.8 (typical**) dBi Efficiency 76.3 (typical**) % *Center frequency means the frequency with the lowest value in return loss of the chip antenna on the evaluation board. **A typical value is for reference only, not guaranteed. 5-2-2. Frequency vs. V.S.W.R. and Total Radiation Gain ຐ཰ࣽިמҽԖज़Ϧљ Unictron Technologies Corporation Website:www.unictron.com THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES W ITHOUT PERMISSION Prepared by : Jane Designed by :James Checked by : Mike Approved by烉Herbert TITLE烉3.2 x 1.6 x 0.5(mm) WiFi/Bluetooth Ceramic Chip Antenna (AA055U) Engineering Specification DOCUMENT H2U34W1H1Z0700 REV. NO. D PAGE 4 OF 11 6. Outline Dimensions of Antenna & Evaluation Board (unit: mm) 6-1. Antenna Dimensions PIN Definition PIN 1 2 Soldering PAD Signal Tuning / Ground ຐ཰ࣽިמҽԖज़Ϧљ Unictron Technologies Corporation Website:www.unictron.com THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES W ITHOUT PERMISSION Prepared by : Jane Designed by :James Checked by : Mike Approved by烉Herbert TITLE烉3.2 x 1.6 x 0.5(mm) WiFi/Bluetooth Ceramic Chip Antenna (AA055U) Engineering Specification DOCUMENT H2U34W1H1Z0700 REV. NO. D PAGE 5 OF 11 6-2. Evaluation Board with Antenna ຐ཰ࣽިמҽԖज़Ϧљ Unictron Technologies Corporation Website:www.unictron.com THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES W ITHOUT PERMISSION Prepared by : Jane Designed by :James Checked by : Mike Approved by烉Herbert TITLE烉3.2 x 1.6 x 0.5(mm) WiFi/Bluetooth Ceramic Chip Antenna (AA055U) Engineering Specification DOCUMENT H2U34W1H1Z0700 REV. NO. D PAGE 6 OF 11 7. 3D Radiation Gain Pattern (with 80 x 40 mm 2 Evaluation Board) 3D Radiation Gain Pattern @ 2442 MHz (unit: dBi) Z X Z Y ຐ཰ࣽިמҽԖज़Ϧљ Unictron Technologies Corporation Website:www.unictron.com THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES W ITHOUT PERMISSION Prepared by : Jane Designed by :James Checked by : Mike Approved by烉Herbert TITLE烉3.2 x 1.6 x 0.5(mm) WiFi/Bluetooth Ceramic Chip Antenna (AA055U) Engineering Specification DOCUMENT H2U34W1H1Z0700 REV. NO. D PAGE 7 OF 11 8. Frequency tuning and Matching circuit 8-1. Chip antenna tuning scenarioǺ 8-2. Matching circuit烉 With the following recommended values of matching and tuning components, the center frequencies will be about 2442 MHz at our standard 80x40 mm 2 evaluation board. However, these are typical reference values which may need to be changed when circuit boards or part vendors are different. System Matching Circuit Component Location Description Vendor T…

Text truncated - open the document above for the full version.

威潤AS300 Engineer : Ting Report date : 2024/04/03 REV.03 2 www.wieson.com •Revision History •Antenna Specification •Antenna Placement •Antenna Solution •Antenna MeasurementVector Network Analyzer –S-Parameter Result –Isolation Result •The Antenna Anechoic Chamber Measurement –Antenna Measurement Photo –Antenna Measurement •Peak Gain、Efficiency Result •2D Antenna Pattern •Conclusion&Recommendations Executive Summary 3 www.wieson.com Revision History RevisionDateEngineerDescription 012023/12/21TingNew Release 022024/01/04TingUpdate Environment 032024/04/03TingRedesignantennas fornew PCBA 4 www.wieson.com Antenna Specification Item LTEGPS Operating Frequency 617-9601710~26901166~11861565-1585 Return Loss 5dB 6 dB10 dB8 dB Peak Gain0.4dBi(Max.)1.05dBi(Max.)0.18 dBi(Max.)0.43 dBi(Max.) Antenna TypeFPC V.S.W.R3.5 : 13 : 12 : 12.3 : 1 Efficiency 36 %(Max.)41 %(Max.)41 %(Max.)40 %(Max.) 5 www.wieson.com AntennaPlacement Z X Y LTE GPS LTE GPS ANTANTTypeSize(L*W*H) LTEFPC62 mm×29mm GPSFPC56 mm×10mm 6 www.wieson.com S-Parameter Result LTE S-Parameter(dB) Freq.(MHz) ANT 61796017102690 LTE -5.0-6.4-12.9-6.0 7 www.wieson.com S-Parameter Result GPS S-Parameter(dB) Freq.(MHz) ANT 11761575 LTE -11.2-8.4 8 www.wieson.com -50.00 -45.00 -40.00 -35.00 -30.00 -25.00 -20.00 -15.00 -10.00 -5.00 0.00 0.500.751.001.251.501.752.002.252.502.753.00 S21[dB] Frequency[GHz] Isolation Result Isolation(dB) Freq.(MHz) ANT 6179601176157517102690 LTE & GPS-21.6-22.8-14.0-18.5-22.1-26.8 LTE to GPS 9 www.wieson.com Z X Y Z Y Chamber Measurement Photo 10 www.wieson.com Peak Gain、Efficiency Result Freq.(GHz) PeakGain (dBi) Efficiency (%) 0.6170.1231 0.6521.237 0.698-0.8734 0.707-0.0336 0.7460.5337 0.7870.3730 0.8240.0830 0.8490.1931 0.9-0.7131 0.9250.0234 0.960.3335 LTE Freq.(GHz) PeakGain (dBi) Efficiency (%) 1.711.4643 1.7850.6337 1.840.8535 1.95-0.3834 1.98-0.3136 2.010.1642 2.17-0.236 2.350.9138 2.41.1141 2.4840.0739 2.50.943 Freq.(GHz) PeakGain (dBi) Efficiency (%) 2.550.6538 2.570.6638 2.60.838 2.651.139 2.6750.7535 2.690.734 11 www.wieson.com Peak Gain、Efficiency Result GPS Freq.(GHz) PeakGain (dBi)Efficiency (%) 1.1660.139 1.1760.1841 1.186-0.1934 1.565-0.0637 1.5750.4340 1.5850.2336 12 www.wieson.com XZ-planeYZ-planeXY-plane X Z Y Z Y X X Z Y Z Y X 2D Antenna Pattern Far-field amplitude limits: Max: 5dB min: -50dB LTE Frequency：617MHz 13 www.wieson.com XZ-planeYZ-planeXY-plane X Z Y Z Y X X Z Y Z Y X X Z Y Z Y X 2D Antenna Pattern Far-field amplitude limits: Max: 5dB min: -50dB LTE Frequency：707MHz 14 www.wieson.com XZ-planeYZ-planeXY-plane X Z Y Z Y X X Z Y Z Y X X Z Y Z Y X X Z Y Z Y X 2D Antenna Pattern Far-field amplitude limits: Max: 5dB min: -50dB LTE Frequency：960 MHz 15 www.wieson.com XZ-planeYZ-planeXY-plane X Z Y Z Y X X Z Y Z Y X X Z Y Z Y X 2D Antenna Pattern Far-field amplitude limits: Max: 5dB min: -50dB LTE Frequency：1710 MHz 16 www.wieson.com XZ-planeYZ-planeXY-plane X Z Y Z Y X 2D Antenna Pattern Far-field amplitude limits: Max: 5dB min: -50dB LTE Frequency：2400 MHz 17 www.wieson.com XZ-planeYZ-planeXY-plane X Z Y Z Y X 2D Antenna Pattern Far-field amplitude limits: Max: 5dB min: -50dB LTE Frequency：2690 MHz 18 www.wieson.com XZ-planeYZ-planeXY-plane X Z Y Z Y X X Z Y Z Y X X Z Y Z Y X X Z Y Z Y X 2D Antenna Pattern Far-field amplitude limits: Max: 5dB min: -50dB GPS Frequency：1176 MHz 19 www.wieson.com XZ-planeYZ-planeXY-plane X Z Y Z Y X X Z Y Z Y X X Z Y Z Y X 2D Antenna Pattern Far-field amplitude limits: Max: 5dB min: -50dB GPS Frequency：1575 MHz 20 www.wieson.com LTE GPS Conclusion & Recommendations 1.主板上彈片無法觸碰版邊天線，故此次模擬使用導電泡棉增加厚度。 Z X Y

Report No.: BTL-FCCP-1-2406T082 Project No.: 2406T082 Page 1 of 58 Report Version: R00 FCC Radio Test Report FCC ID: YA7-AS300 Report No. : BTL-FCCP-1-2406T082 Equipment : Compact Asset Tracker Model Name : AS300 Brand Name : ATrack Applicant : ATrack Technology Inc. Address : 8F., No. 13 Ln. 120, Sec. 1, Neihu Rd., Neihu Dist., Taipei City 11493, Taiwan Radio Function : Bluetooth Low Energy FCC Rule Part(s) : FCC CFR Title 47, Part 15, Subpart C (15.247) Measurement Procedure(s) : ANSI C63.10-2013 Date of Receipt : 2024/6/26 Date of Test : 2024/7/3 ~ 2024/8/1 Issued Date : 2024/9/12 The above equipment has been tested and found in compliance with the requirement of the above standards by BTL Inc. Prepared by : Eddie Lee, Engineer Approved by : Jerry Chuang, Supervisor BTL Inc. No.18, Ln. 171, Sec. 2, Jiuzong Rd., Neihu Dist., Taipei City 114, Taiwan Tel: +886-2-2657-3299 Fax: +886-2-2657-3331 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-1-2406T082 Project No.: 2406T082 Page 2 of 58 Report Version: R00 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL assumes no responsibility for the data provided by the Customer, any statements, inferences or generalizations drawn by the customer or others from the reports issued by BTL. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-1-2406T082 Project No.: 2406T082 Page 3 of 58 Report Version: R00 CONTENTS REVISION HISTORY 5 1 SUMMARY OF TEST RESULTS 6 1.1 TEST FACILITY 7 1.2 MEASUREMENT UNCERTAINTY 7 1.3 TEST ENVIRONMENT CONDITIONS 7 1.4 DUTY CYCLE 8 2 GENERAL INFORMATION 9 2.1 DESCRIPTION OF EUT 9 2.2 TEST MODES 11 2.3 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 2.4 SUPPORT UNITS 13 3 AC POWER LINE CONDUCTED EMISSIONS TEST 14 3.1 LIMIT 14 3.2 TEST PROCEDURE 14 3.3 DEVIATION FROM TEST STANDARD 15 3.4 TEST SETUP 15 3.5 TEST RESULT 15 4 RADIATED EMISSIONS TEST 16 4.1 LIMIT 16 4.2 TEST PROCEDURE 17 4.3 DEVIATION FROM TEST STANDARD 17 4.4 TEST SETUP 18 4.5 EUT OPERATING CONDITIONS 19 4.6 TEST RESULT – 9KHZ TO 30 MHZ 19 4.7 TEST RESULT – 30 MHZ TO 1 GHZ 19 4.8 TEST RESULT – ABOVE 1 GHZ 19 5 BANDWIDTH TEST 20 5.1 APPLIED PROCEDURES / LIMIT 20 5.2 TEST PROCEDURE 20 5.3 DEVIATION FROM STANDARD 20 5.4 TEST SETUP 20 5.5 EUT OPERATION CONDITIONS 20 5.6 TEST RESULTS 20 6 OUTPUT POWER TEST 21 6.1 APPLIED PROCEDURES / LIMIT 21 6.2 TEST PROCEDURE 21 6.3 DEVIATION FROM STANDARD 21 6.4 TEST SETUP 21 6.5 EUT OPERATION CONDITIONS 21 6.6 TEST RESULTS 21 7 POWER SPECTRAL DENSITY TEST 22 7.1 APPLIED PROCEDURES / LIMIT 22 7.2 TEST PROCEDURE 22 7.3 DEVIATION FROM STANDARD 22 7.4 TEST SETUP 22 7.5 EUT OPERATION CONDITIONS 22 7.6 TEST RESULTS 22 Report No.: BTL-FCCP-1-2406T082 Project No.: 2406T082 Page 4 of 58 Report Version: R00 8 ANTENNA CONDUCTED SPURIOUS EMISSION 23 8.1 APPLIED PROCEDURES / LIMIT 23 8.2 TEST PROCEDURE 23 8.3 DEVIATION FROM STANDARD 23 8.4 TEST SETUP 23 8.5 EUT OPERATION CONDITIONS 23 8.6 TEST RESULTS 23 9 LIST OF MEASURING EQUIPMENTS 24 10 EUT TEST PHOTO 26 11 EUT PHOTOS 26 APPENDIX A AC POWER LINE CONDUCTED EMISSIONS 27 APPENDIX B RADIATED EMISSIONS - 9 KHZ TO 30 MHZ 32 APPENDIX C RADIATED EMISSIONS - 30 MHZ TO 1 GHZ 37 APPENDIX D RADIATED EMISSIONS - ABOVE 1 GHZ 40 APPENDIX E BANDWIDTH 51 APPENDIX F OUTPUT POWER 53 APPENDIX G POWER SPECTRAL DENSITY TEST 55 APPENDIX H ANTENNA CONDUCTED SPURIOUS EMISSION 57 Report No.: BTL-FCCP-1-2406T082 Project No.: 2406T082 Page 5 of 58 Report Version: R00 REVISION HISTORY Report No. Version Description Issued Date Note BTL-FCCP-1-2406T082 R00 Original Report. 2024/9/12 Valid Report No.: BTL-FCCP-1-2406T082 Project No.: 2406T082 Page 6 of 58 Report Version: R00 1 SUMMARY OF TEST RESULTS Test procedures according to the technical standards. Standard(s) Section Description Test Result Judgement Remark 15.207 AC Power Line Conducted Emissions APPENDIX A Pass ------ 15.205 15.209 15.247(d) Radiated Emissions APPENDIX B APPENDIX C APPENDIX D Pass ------ 15.247(a)(2) Bandwidth APPENDIX E Pass ------ 15.247(b)(3) Output Power APPENDIX F Pass ------ 15.247(e) Power Spectral Density APPENDIX G Pass ------ 15.247(d) Antenna conducted Spurious Emission APPENDIX H Pass ------ 15.203 Antenna Requirement ------ Pass ------ NOTE: (1) ”N/A” denotes test is not applicable in this Test Report. (2) The report format version is TP.1.1.1. Report No.: BTL-FCCP-1-2406T082 Project No.: 2406T082 Page 7 of 58 Report Version: R00 1.1 TEST FACILITY The test l…

Text truncated - open the document above for the full version.

Appendix No.: TP-2406T082-FCCP-1 APPENDIX-TEST PHOTOS Project No.: 2406T082 Page 1 of 5 AC Power Line Conducted Emissions test photos Appendix No.: TP-2406T082-FCCP-1 APPENDIX-TEST PHOTOS Project No.: 2406T082 Page 2 of 5 Radiated emissions test photos 9kHz to 30 MHz Appendix No.: TP-2406T082-FCCP-1 APPENDIX-TEST PHOTOS Project No.: 2406T082 Page 3 of 5 Radiated emissions test photos 30 MHz to 1 GHz Appendix No.: TP-2406T082-FCCP-1 APPENDIX-TEST PHOTOS Project No.: 2406T082 Page 4 of 5 Radiated emissions test…

Text truncated - open the document above for the full version.