YAMADN02Wireless Audio Adapter

DN-02 OWNER’S MANUAL 2014 HyteraCommunicationsCorporationLimited. HyteraCommunicationsCorporationLimited. O10745 C10524 Z04313 8110000006910 A 1 Preface Thanks for your favor in our product. To derive optimum performance from the product, please read this manual carefully before use. This manual is applicable to the following product: ADN-01 Wireless Audio Adapter (PD70X series) ADN-02 Wireless Audio Adapter (PD60X series) ESW01 Wireless Earpiece Disclaimer Hytera Communications Corporation Limited (the Company) endeavors to achieve the accuracy and completeness of this manual, but no warranty of accuracy or reliability is given. All the specifications and designs are subject to change without notice due to continuous technology development. No part of this manual may be copied, modified, translated, or distributed in any manner without the express written permission of us. If you have any suggestions or would like to learn more details, please visit our website at: http://www.hytera.com. Instructions ●Ensure the distance between the wireless earpiece and the radio is within 10 meters during operation. ●Only use the wireless earpiece if traffic conditions permit safe use and check if local laws and regulations restrict the use of wireless earpiece while driving. ●Do not use the wireless earpiece during lightning storm weather to avoid malfunction. ●Exposure to loud noise from any source for extended periods of time may temporarily or permanently affect your hearing. Use as low a volume as possible and avoid prolonged wearing. 2 Items in the Package Please unpack carefully and check that all items listed below are received. If any item is missing or damaged, please contact your dealer. No.NameQty. 1Wireless Earpiece1 2Earhook1 3Rubber Ear Cushion3 4Wireless Audio Adapter1 5Owner’s Manual1 Function Overview This exquisite, easy-wearing and low- powered wireless kit is applicable to Hytera portable radios with firmware version of 5.05 and above. With Hands-free function, you can have convenient and safe communication within a distance of 10 meters from the radio. 3 Product Overview Wireless Earpiece 4 Wireless Audio Adapter 5 Specification Talk Time>4 hours Dust/Water Protection Class IP54 Operation Temperature Wireless Earpiece: -20 ̊C to ＋60 ̊C Wireless Audio Adapter: -25 ̊C to +65 ̊C Storage Temperature Wireless Earpiece: -40 ̊C to ＋75 ̊C Wireless Audio Adapter: -40 ̊C to +75 ̊C Charging the Wireless Earpiece Note： ● To charge the wireless earpiece, simply connect it to the adapter on the radio. It is recommended to use the high-capacity battery specified by the Company to ensure the optimal operation duration of the radio. ● Charging the wireless earpiece will not affect the radio operation. ● If the earpiece is idle for a long time, charge it at least once within three months. ● If the LED indicator does not glow red while the wireless earpiece is being charged, charge the earpiece for 10 to 20 minutes for it to recover to normal status. Charge the wireless earpiece before use. The LED indicator of the wireless earpiece glows red during charging and glows blue when the wireless earpiece is fully charged. Also, the LED indicator indicates the pairing and connection status. Please refer to LED Indication for details. 6 3. Turn on the radio. Caution: The wireless earpiece can be charged only when the radio is powered on. 2. Fix the wireless earpiece into the wireless audio adapter. Make sure the wireless earpiece is fully fixed into the adapter. Pairing with and Connecting to the Adapter Before initial use, the wireless earpiece needs to be paired with and connected to the adapter automatically. Afterwards, the wireless earpiece can be connected to the adapter automatically upon power-on. Note: Wireless ring PTT is an optional accessory. Please contact us or your local dealer for details. Auto Pairing and Connection When the wireless earpiece is connected to the adapter for initial use, the wireless earpiece will be paired with and connected to the adapter automatically. 1. Connect the wireless audio adapter to the radio and secure the screw to fasten it. 7 » When there is a wireless ring PTT available for pairing and connection and it is paired and connected successfully, the LED indicator of the adapter flashes blue rapidly. » When there is a wireless ring PTT available for pairing and connection but it is not paired and connected successfully, the adapter will exit the pairing and connection mode of the wireless ring PTT after about three minutes, and the LED indicator of the adapter flashes blue rapidly at the same time. » When there is no wireless ring PTT available for pairing and connection, the adapter will exit the pairing and connection mode of the wireless ring PTT after about three minutes, and the LED indicator of the adapter flashes blue rapidly at the same time. 1. Disconnect the wireless earpiece from other devices (excluding wireless ring PTT). 2. Connect the wireless earpiece with the radio. See Charging the Wireless Earpiece for details. 3. Turn on the radio, and the wireless earpiece will be powered up. 4. The wireless earpiece will be paired with and connected to the adapter automatically. 1. Pairing mode: The LED indicator of the wireless earpiece/adapter flashes red and blue alternatively. 2. Connection status: When the connection is completed, the LED indicator of the wireless earpiece flashes blue rapidly and the LED indicator of the adapter glows blue (waiting for pairing and connection of the wireless ring PTT). 8 Manual Pairing and Connection Scenario One When the wireless earpiece is not connected to the adapter for initial use, the wireless earpiece needs to be paired with and connected to the adapter manually. 1. Disconnect the wireless earpiece from other devices (excluding wireless ring PTT). 2. Connect the wireless audio adapter to the radio and secure the screw to fasten it. 3. Turn on the radio, and the wireless audio adapter will be powered up. 4. Long…

Text truncated - open the document above for the full version.

Hytera Communications Corporation Ltd. Add: HYT Tower, Hi-Tech Industrial Park North, Nanshan District, Shenzhen China. 518057 Tel: +86-0755-26972999 Fax: +86-0755-86137130 FCC Authorization Date: 2014-10-09 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We Hytera Communications Corporation Ltd., the undersigned, Hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Lei Xiong General Director QA-FR-170-B

10/09/2014 Tel: +86-0755-26972999 Fax: +86-0755-86137130 Hytera Communications Corporation Ltd. Add: HYT Tower, Hi-Tech Industrial Park North, Nanshan District, Shenzhen China. 518057 FCC Confidential Authorization FE DERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Confidentiality Request regarding application for certification of Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below:  Block Diagram--- (Long term)  Circuit Description--- (Long term)  schematic --- (Long term) Th e above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely Yours, Signature: Lei Xiong General Director FCC ID: YAMADN02

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS EUT – Front View EUT – Rear View EUT – Top View EUT – Bottom View EUT – Left Side View EUT – Right Side View

EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925) Label here

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS EUT – Cover off View EUT – Main Board Top View Antenna EUT – Main Board Bottom View

Note: This test report is prepared for the customer shown above and for the equipment described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. FCC PART 15.247 TEST REPORT For Hytera Communications Co., Ltd. HYT Tower, Hi-Tech Industrial Park North, Nanshan District, Shenzhen, China FCC ID: YAMADN02 Report Type: Original Report Product Type: Wireless Audio Adapter Test En gineer: Gardon Zhang Re port Number: RSZ140915002-00A Re port Date: 2014-10-11 Reviewed B y: Jimmy Xiao RF En gineer Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F, the 3rd Phase of WanLi Industrial Building ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ140915002-00A FCC Part 15.247 Page 2 of 55 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 4 TEST METHODOLOGY .................................................................................................................................................. 4 TEST FACILITY ............................................................................................................................................................. 4 SYSTEM TEST CONFIGURATION .......................................................................................................................... 5 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 5 EUT EXERCISE SOFTWARE .......................................................................................................................................... 5 SPECIAL ACCESSORIES ................................................................................................................................................. 5 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 5 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 5 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 5 SUMMARY OF TEST RESULTS ............................................................................................................................... 6 FCC §15.247 (i) & §2.1093 – RF EXPOSURE ............................................................................................................ 7 APPLICABLE STANDARD .............................................................................................................................................. 7 FCC §15.203 – ANTENNA REQUIREMENT ............................................................................................................ 8 APPLICABLE STANDARD .............................................................................................................................................. 8 ANTENNA CONNECTOR CONSTRUCTION ...................................................................................................................... 8 FCC §15.205, §15.209 & §15.247(d) – RADIATED EMISSIONS ............................................................................. 9 APPLICABLE STANDARD .............................................................................................................................................. 9 MEASUREMENT UNCERTAINTY .................................................................................................................................... 9 EUT SETUP .................................................................................................................................................................. 9 EMI TEST RECEIVER & SPECTRUM ANALYZER SETUP .............................................................................................. 10 TEST PROCEDURE ...................................................................................................................................................... 10 CORRECTED AMPLITUDE & MARGIN CALCULATION ................................................................................................. 10 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 11 TEST RESULTS SUMMARY .......................................................................................................................................... 11 TEST DATA ................................................................................................................................................................ 11 FCC §15.247(a) (1)-CHANNEL SEPARATION TEST ........................................................................................... 14 APPLICABLE STANDARD ............................................................................................................................................ 14 TEST PROCEDURE ...................................................................................................................................................... 14 TE…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Radiated Emissions View (Below 1 GHz) Radiated Emissions View (Above 1 GHz)