YCK-CM100LTEBlackvue Connectivity Module

DR750X-2CH © 2020 DR750X-2CH instagram.com/BlackVueofficial Headquarter FCC ID: YCK-DR750X-2CH / HVIN : DR750X-2CH Pittasoft 4F, 331, Pangyo-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, Republic of Korea, 13488 Service Center ENGLISH BLACKVUE DR750X-2CH For manuals, customer support and FAQs go to www.blackvue.com Important safety information For user safety and to avoid property damage, read through this manual and follow these safety instructions to use the product correctly. y Do not disassemble, repair, or modify the product yourself. Doing so may cause fire, electric shock, or malfunction. For internal inspection and repair, contact the service center. y Do not adjust the product while driving. Doing so may cause an accident. Stop or park your car in a safe place before installing and setting up the product. y Do not operate the product with wet hands. Doing so may cause electric shock. y If any foreign matter gets inside the product, detach the power cord immediately. Contact the service center for repair. y Do not cover the product with any material. Doing so may cause external deformation of the product or fire. Use the product and peripherals in a well-ventilated location. y If the product is used outside the optimal temperature range (-20°C - 85°C / -4°F - 185°F), performance can decline or malfunctions may occur. y When entering or exiting a tunnel, when directly facing into bright sunlight, or when recording at night without lighting the quality of recorded video may deteriorate. y If the product is damaged or the power supply is cut due to an accident, video may not be recorded. y Do not remove the microSD card while the microSD card is saving or reading data. y The data can be damaged or malfunctions may occur. DR750X-2CH2 FCC Compliance Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protections against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to ty to correct the interference by one or more of the following measures. y Reorient or relocate the receiving antenna. y Increase the separation between the equipment and receiver. y Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. y Consult the dealer or an experienced radio, TV technician for help. y Only shielded interface cable should be used. Finally, any changes or modifications to the equipment by the user not expressly approved by the grantee or manufacture could void the user’s authority to operate such equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation of this device. FCC ID: YCK-DR750X-2CH 3BLACKVUE FCC RF Radiation Exposure Statement: This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. CAUTION Any changed or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. CE WARNING y Changes and modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. y It is desirable that it be installed and operated with at least 20cm or more between the radiator and a person’s body (excluding extremities: hand, wrists, feet, and ankles). Disposal of your BlackVue dashcam 1. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. Contact local authorities to learn about disposal and recycling options available in your area. 2. The correct disposal of your BlackVue dashcam will help prevent potential negative consequences for the environment and human health. 3. For more detailed information about disposal of your BlackVue dashcam, please contact your city office, waste disposal service or the shop where you purchased the product. DR750X-2CH4 ICC Compliance This Class [B] digital apparatus complies with Canadian ICES-003. This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. - IC Warning This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicable aux appreils radio exempts de license. L’exploitation est aut…

Text truncated - open the document above for the full version.

Applicant Declaration Applicant Declaration Rev: 0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Pittasoft Co., Ltd. Address A 4th floor, ABN Tower, 331, Pangyo-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, 13488, South Korea Grantee Code YCK FCC ID YCK-CM100LTE Authorized Contact Name Kwang-Jo Kim Contact Email [email protected] Contact Phone 82-10-8998-8734 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has r ead, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: May 6, 2020 Print Name: Kwang-Jo Kim Title: Research Advisor *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Pittasoft Co., Ltd. 7F, BYC HIGH CITY Building A 131, Gasan Digital-ro, Geumcheon-gu, Seoul, South Korea Regarding: Confidentiality Request regarding application for FCC ID YCK-CM100LTE LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Kim, Kwang Jo Research Advisor Pittasoft Co., Ltd.

Date: April 20, 2020 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: YCK-CM100LTE To whom it may concern: We, the undersigned, hereby authorize SGS Korea Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Pittasoft Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Kim, Kwang Jo Title: Research Advisor Signature: On behalf of Company: Pittasoft Co., Ltd. Telephone: 82-10-8998-8734

Letter of Declaration Product Equality 20 April 2020 We, as a manufacturer, hereby declare that our product has variant model names as listed below. Each model has a different configuration and entire test was performed with basic model. There is no hardware difference among the listed models that have different configurations. All the compliances have been demonstrated with representative model and difference of configuration does not affect compliances. Model Name Information Basic Model CM100LTE - Basic model Variant Models CM100LTE1 - Variant models are all same as basic model except for supported country. CM100LTE2 CM100LTE3 CM100LTE4 CM100LTE5 CM100LTE6 CM100LTE7 CM100LTE8 CM100LTE9 CM100LTE10 Kim Kwang Jo Research Advisor, HW Team, R&D Center Pittasoft Co., Ltd.

Front View of EUT Rear View of EUT Inside of EUT Front View of Main Board Rear View of Main Board View of Antenna

1.2020.04.28 Model: CM100LTE [NA] CM100LTE_Product_CM100LTE[NA] Contains FCC ID : XMR201605EC25A Contains IC ID : 10224A-201611EC25A This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Front View of EUT Rear View of EUT Inside of EUT Front View of Main Board Rear View of Main Board View of Antenna

Test Report No. : F690501-RF-EMG000144-2 Page : 2 of 11 EMC5101-01A(2017.07.06)(2) A4(210mm*297mm) Contents 1. General Information ................................................................................................... 4 1.1 Client Information ................................................................................................ 4 1.2 Test Laboratory ................................................................................................... 4 1.3 General Information of E.U.T. ............................................................................. 4 1.4 Operating Modes and Conditions ........................................................................ 5 1.5 Auxiliary Equipments .......................................................................................... 5 1.6 Cable List ............................................................................................................ 5 1.7 System Configurations ........................................................................................ 6 1.8 Test System Layout ............................................................................................ 6 1.9 Modifications ....................................................................................................... 6 1.10 Applicable Standards for Testing ...................................................................... 6 1.11 Summary of Test Results .................................................................................. 6 2. Emission Test ............................................................................................................ 7 2.1 Test Results ........................................................................................................ 7 2.2 Test Method and Limits ....................................................................................... 7 2.2.1 Test Method ............................................................................................... 7 2.2.2 Test Limits .................................................................................................. 7 2.3 Radiated Emission .............................................................................................. 8 2.3.1 Test Equipments ........................................................................................ 8 2.3.2 Test Site ..................................................................................................... 8 2.3.3 Environment Conditions and data .............................................................. 8 Appendix A : Radiated Emission ................................................................................. 11 Test Report No. : F690501-RF-EMG000144-2 Page : 3 of 11 EMC5101-01A(2017.07.06)(2) A4(210mm*297mm) Revision History Revision Report Number Description 0 F690501-RF-EMG000144 Initial 1 F690501-RF-EMG000144-1 Corrected System Configurations. 2 F690501-RF-EMG000144-2 Corrected System Configurations. Test Report No. : F690501-RF-EMG000144-2 Page : 4 of 11 EMC5101-01A(2017.07.06)(2) A4(210mm*297mm) 1. General Information 1.1 Client Information Applicant : Pittasoft Co., Ltd. - Address of Applicant : A 4th floor, ABN Tower, 331, Pangyo-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, Republic of Korea Manufacturer : Pittasoft Co., Ltd. - Address of Manufacturer : A 4th floor, ABN Tower, 331, Pangyo-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, Republic of Korea Factory : SMT SCOUT Co., Ltd. - Address of Factory : 38 Dangjeong-ro, Gunpo-so, Gyeonggi-do, Republic of Korea, 15849 1.2 Test Laboratory Name and Address : SGS Korea Co., Ltd. - Giheung 1 Laboratory : 35, Giheungdanji-ro 121beon-gil, Giheung-gu, Yongin-si, Gyeonggi-do, Republic of Korea - Giheung 2 Laboratory : 23, Giheungdanji-ro 24beon-gil, Giheung-gu,Yongin-si, Gyeonggi-do, Republic of Korea - Gunpo Laboratory : 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, 15807, Republic of Korea. Phone : + 82 31 428 5700 Fax : + 82 31 427 2370 e-mail : [email protected] 1.3 General Information of E.U.T. Classification Description Product Name Blackvue Connectivity Module Model Name CM100LTE Alt.Model Name CM100LTE1, CM100LTE2, CM100LTE3, CM100LTE4, CM100LTE5, CM100LTE6, CM100LTE7, CM100LTE8, CM100LTE9, CM100LTE10 Model Differences Refer to Note1. Serial No. None Highest Internal Frequency 1 850 ㎒ ~ 1 990 ㎒ EMI Classification Class B Test Voltage 120 V~, 60 ㎐(for Travel Adapter), 12 Vd.c.(for Battery) Operating Voltage 5.0 Vd.c. 2.0 A (Minimum 2.7 Vd.c. ~ Maximum 5.5 Vd.c.) Operating Temperature (-)35 °C ~ (+)75 °C S/W Version LTEON_VER0.90 H/W Version CM100LTE_PP_V02 Function This device is an LTE connection used in Dash Cam. Test Report No. : F690501-RF-EMG000144-2 Page : 5 of 11 EMC5101-01A(2017.07.06)(2) A4(210mm*297mm) Note1. Model Differences Model name Information Basic Model CM100LTE - Basic model Variant Models CM100LTE1 - Variant models are all same as basic model except for supported country. CM100LTE2 CM100LTE3 CM100LTE4 CM100LTE5 CM100LTE6 CM100LTE7 CM100LTE8 CM100LTE9 CM100LTE10 1.4 Operating Modes and Conditions Operating Mode Percussor 1) Standby(LTE 2) Standby(LTE 2) Mode 1.5 Auxiliary Equipments Description Model Serial No. Manufacturer Travel Adapter EP-TA200 R37MA8S2NF1SE3 SAMSUNG Power Module KM001 - Chargerlab Car Battery - - - Dash Cam BLACKVUE Cloud - Pittasoft Co., Ltd. 1.6 Cable List Start END Cable Spec. Used core Name I/O Port Name I/O Port Length Shield Radiated Emission(Below 1 ㎓) Test Car Battery AC OUT Dash Cam AC IN 4.2 Unshield No Dash Cam DC OUT EUT DC IN 1.5 Unshield No Radiated Emission(Above 1 ㎓) Test AC Source AC OUT Travel Adapter AC IN - - - Travel Adapter DC OUT Power Module DC IN - - - Power Module USB EUT - 1.5 Unshield No Test Report No. : F690501-RF-EMG000144-2 Page : 6 of 11 EMC5101-01A(2017.07.06)(2) A4(210mm*297mm) 1.7 System Configurations Description Model Serial No. Manufacturer Main Board CM100LTE_PP_V02 - - Antenna - - - Note. Antenna Requirement For inte…

Text truncated - open the document above for the full version.

Radiated Emission (Below 1 ㎓ ) _ Front Radiated Emission (Below 1 ㎓ ) _ Rear Radiated Emission ( Above 1 ㎓ ) _ Front Radiated Emission ( Above 1 ㎓ ) _ Rear