YDBM9HS2DECT VOIP PHONE

Wall Mounting - Wandmontage - Fixation murale - Montaje en pared - Montaggio a parete - Montagem na parede Distance to wall Abstand zur Wand Distance au mur Distanza dalla parete Distancia a la pared Distância à parede ∼6 mm (0.236") ømax 8 mm (0.315") ømax 5 mm (0.197") 2 x Notincludedindelivery: NichtimLieferumfangenthalten: Noninclus: Noincluidos: Noninclusos: Nãoincluído: 123 mm qsg_m9_113.indd 202.11.2011 09:58:58 3 english ....................................................................................5 Safety Information & Warranty USA .....................23 Safety Information & Warranty Australia .....................37 Safety Information & Warranty New Zealand ............41 deutsch ....................................................................................45 français ....................................................................................65 italiano ....................................................................................85 español ....................................................................................105 appendix · anhang · annexe · apendice · anexo GNU General Public Licence ............................................................124 Distance to wall Abstand zur Wand Distance au mur Distanza dalla parete Distancia a la pared Distância à parede ∼6 mm (0.236") ømax 8 mm (0.315") ømax 5 mm (0.197") qsg_m9_113.indd 302.11.2011 09:58:58 4 snom m9 Quick Start Guide E N G L I S H qsg_m9_113.indd 402.11.2011 09:58:58 5 snom m9 Quick Start Guide E N G L I S H This is the Quick Start Guide to the installation, setup, and operation of the base station and the phone. For further information please refer to the manual at http://wiki.snom.com. deliVerY content Complete Set Handset Kit 1.Base station1 x- 2.Base station power adapter (5 V, DC plug inner Ø 2.1 mm, outer Ø 5.5 mm) 1 x- 3.Network cable1 x- 4.Handset1 x1 x 5.3.7 V Lithium-Ion rechargeable battery pack 1 x1 x 6.Handset charger1 x1 x 7.Handset charger power adapter (5.9 V, DC plug inner Ø 1.35 mm, outer Ø 3.5 mm) 1 x1 x 8.Belt clip1 x1 x You will also need: Data received from your service provider or administrator: 1. Account (usually the phone number) (required) 2. Registrar (required) 3. Password, authentication name, outbound proxy (may be required, mailbox account (if available) 4. If DHCP is not available for automatic initialization, you will also need the IP address, the IP gateway and the DNS server. Press > (Settings menu) > Network > enter PIN > select IP Gateway and DNS Server, respectively, with OK. qsg_m9_113.indd 502.11.2011 09:58:58 6 snom m9 Quick Start Guide E N G L I S H copYright, tradeMarKs, gpl, legal disclaiMers © 2011 snom technology Aktiengesellschaft All Rights Reserved. snom, the names of snom products, and snom logos are trademarks owned by snom technology AG. All other product names and names of enterprises are the property of their respective owners. snom technology AG reserves the right to revise and change this document at any time, without being obliged to announce such revisions or changes beforehand or after the fact. Texts, images, and illustrations and their arrangement in this document are subject to the protection of copyrights and other legal rights worldwide. Their use, reproduction, and transmittal to third parties without express written permission may result in legal proceedings in the criminal courts as well as civil courts. When this document is made available on snom’s web page, snom technology AG gives its permission to download and print copies of its content for the intended purpose of using it as a manual. No parts of this document may be altered, modified or used for commercial purposes without the express written consent of snom technology AG. Although due care has been taken in the compilation and presentation of the information in this document, the data upon which it is based may have changed in the meantime. snom therefore disclaims all warranties and liability for the accurateness, completeness, and currentness of the information published, except in the case of intention or gross negligence on the part of snom or where liability arises due to binding legal provisions. Our firmware includes some source code that may be used and modified by anyone and everyone under the GNU Public License (GPL) (see Appendix on page 124), provided they, in turn, make it available to everyone else with the same licensing agreement. Please go to http://www.snom. com/en/support/download/gpl-quellcode/ for the original GPL license and the source code of components licensed under GPL and used in snom products. qsg_m9_113.indd 602.11.2011 09:58:58 7 snom m9 Quick Start Guide E N G L I S H Standards Conformance This phone is CE and FCC-certified and meets European and US health, safety, and environmental standards. Unauthorized opening, changing, or modifying the phone will cause the warranty to lapse and may also result in the lapse of the CE and FCC certifications. In case of malfunction contact authorized service personnel, your seller, or snom. Base ID: YDBM9BS1 Handset ID: YDBM9HS2 qsg_m9_113.indd 702.11.2011 09:58:59 8 snom m9 Quick Start Guide E N G L I S H safetY precautions Please read these precautions and the instructions on how to set up and use the base and the phone thoroughly before using the devices. Save this Quick Start Guide and do not give the device to third parties without it. See also separate general safety information and country-specific safety and warranty information for the USA, Australia, and New Zealand. Power supplies/adapters, rechargeable battery • Use only the power converters (AC/DC adapters) delivered with the base station and the phone or those power supplies expressly recommended by snom. Other power power supplies may damage or even destroy the device(s). Elementech Power Adapters, Model No. Base stationHandset charger Europe without UK AU1050507eAU1050607e UK AU1050505bAU1050605b USA & …

Text truncated - open the document above for the full version.

ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL www.snom.com www.snom.com © 2011 snom technology AG v1.13 Quick Start Guide snom technology AG Charlottenstr. 68-71 10117 Berlin, Deutschland Tel. +49 30 39 83 3-0 Fax +49 30 39 83 31 11 [email protected], [email protected] snom technology, Inc. 18 Commerce Way, Suite 6000 Woburn, MA 01801, USA Tel. 781-569-2044 Fax 978-998-7883 [email protected] snom UK Ltd Aspect Court 47 Park Square East Leeds, LS12NL, UK Tel. +44 1133 503 111 Fax +44 1133 503 110 [email protected], [email protected] snom France SARL 6 Parc des fontenelles 78870 Bailly, France Tel. +33 1 80 87 62 87 Fax +33 1 80 87 62 88 [email protected], [email protected] snom technology SRL Via A. Lusardi 10 20122 Milano, Italia Tel +39 02 00611212 Fax +39 02 93661864 [email protected], [email protected] snom technology Ltd. Rm. A2, 3F, No. 37, Ln. 258 Ruiguang Rd., Neihu Dist. Taipei City 114, Taiwan Tel +886-2-8751-1120 Fax +886-2-8751-1130 [email protected] Your specialist retailer - Ihr Fachhändler - Votre distributeur - Su distribuidor - Il tuo rivenditore:

FCC ID: YDBM9HS2 ETC Report No.: 11-09-MAS-087-01 Page A1 of A4 ANNEX A: EXTERNAL CONSTRUCTION PHOTOS OF EUT 1. Outside view 1 of EUT 2. Outside view 2 of EUT FCC ID: YDBM9HS2 ETC Report No.: 11-09-MAS-087-01 Page A2 of A4 3. Outside view 1 of cradle 4. Outside view 2 of cradle FCC ID: YDBM9HS2 ETC Report No.: 11-09-MAS-087-01 Page A3 of A4 5. Outside view 1 of Adapter 6. Outside view 2 of Adapter FCC ID: YDBM9HS2 ETC Report No.: 11-09-MAS-087-01 Page A4 of A4 7. Outside view 3 of Adapter

FCC ID Label_Location

snom technical datasheet (P-DIN_A4) Version 1.2.1. /// Nov 2009 companysnom technology AG revisionPS No.ERP No.scale total pagespage model snom m9r 37.50.000031141:11 1 productTYPE LABEL HANDSET - EU/UK/AUS prepa red byMartin Taube lename snom_m9r_label_type_handset_EU_UK_AUS_rev3.pdf checked by created2011-06-01 app roved by last saved2011-11-10 status 1. Bar code System: Code 128 2. Material: white ART paper 3. Printing color: Black. The content of pink color areas must be print on the assembly line. Do not pre-print the pink areas data! 4. Tolerance: ±0.2mm 5. SIZE: 40.0(W)X22.0(H)mm 6. Print content: A. Serial No. barcode (Code 128): XXX:= Country of Origin - ISO 3166-1 alpha-3 (3 digits) YY:= Product of factory abbreviation - provided by snom (2 digits) ZZ:= 00 instead of BASE 11 instead of Handset 22 instead of Charger nX8888:= VerWWYY V ersion, week, year (only last two digits) 99999:= Serial Number (5 digits, numeric) B. IPEI No. TYP N 10 digits (hexdec) C. Country of Origin (English name) D. Revision: RnX (provided by snom with PO) R:= indicates revision number (fixed information) n:=1st revision index (major changes) (numeric) X:=2nd revision index (minor changes) (capital letter) e.g. R3A 7. Attach onto the backside of the phone enclosure 8. Do not rip off the label and never re-use it! C D A B 22 mm 0.1mm 40 mm Made in XXXXX label thickness (side view) RnX

FCC ID: YDBM9HS2 ETC Report No.: 11-09-MAS-087-01 Page B1 of B9 ANNEX B: INTERNAL CONSTRUCTION PHOTOS OF EUT 1. Inside View 1 of EUT 2. Inside View 2 of EUT FCC ID: YDBM9HS2 ETC Report No.: 11-09-MAS-087-01 Page B2 of B9 3. Inside View 3 of EUT 4. Inside View 4 of EUT FCC ID: YDBM9HS2 ETC Report No.: 11-09-MAS-087-01 Page B3 of B9 5. Inside View 5 of EUT 6. Inside View 6 of EUT FCC ID: YDBM9HS2 ETC Report No.: 11-09-MAS-087-01 Page B4 of B9 7. Inside View 7 of EUT 8. Keyboard FCC ID: YDBM9HS2 ETC Report No.: 11-09-MAS-087-01 Page B5 of B9 9. Module 10. Front view of PCB1 FCC ID: YDBM9HS2 ETC Report No.: 11-09-MAS-087-01 Page B6 of B9 11. Rear view of PCB1 12. Front view of PCB2 FCC ID: YDBM9HS2 ETC Report No.: 11-09-MAS-087-01 Page B7 of B9 13. Rear view of PCB2 14. Inside View 1 of cradle FCC ID: YDBM9HS2 ETC Report No.: 11-09-MAS-087-01 Page B8 of B9 15. Inside View 2 of cradle 16. Front view of PCB FCC ID: YDBM9HS2 ETC Report No.: 11-09-MAS-087-01 Page B9 of B9 17. Rear view of PCB

Report No.: 11-09-MAS-087-03 Page 1 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 1 Report No.: 11-09-MAS-087-03 Client: Snom Technology AG Product: DECT VOIP Phone Model: Snom m9r FCC ID: YDBM9HS2 Manufacturer/supplier: GBM Group Date test item received: 2011/09/08 Date test campaign completed: 2011/10/05 Date of issue: 2011/10/05 Test Result: ■ Compliance □ Not Compliance Statement of Compliance: The SAR values measured for the test sample are below the maximum recommended level of 1.6 W/kg averaged over any 1g tissue according to FCC OET Bulletin 65 Supplement C (Edition 01-01). The test result onl y corresponds to the tested sample. It is not permitted to copy this report, in part or in full, without the permission of the test laboratory. Total number of pages of this test report: 85 pages Test Engineer Perry Lin Checked by James Cheng Approved by Winpo Tsai The testing described in this report has been carried out to the best of our knowledge and ability, and our responsibility is limited to the exercise of reasonable care. This certification is not intended to believe the sellers from their legal and/or contractual obligations. SAR Evaluation Report for FCC OET Bulletin 65 Supplement C Report No.: 11-09-MAS-087-03 Page 2 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 2 Applicant Information Client : Snom Technology AG Address : Charlottenstr., 68-71 Berlin, Germany Manufacturer : GBM Group Address : Yue Yuen Industrial Estate, Huang Jiang Zhen Dong Guan City, Guang Dong Province, China EUT : DECT VOIP Phone Trade Name ---- Model No. : Snom m9r Standard Applied : FCC OET 65 Supplement C (Edition 01-01, June 2001) IEEE Standard 1528-2003 Test Location : Electronics Testing Center, Taiwan (www.etc.org.tw) No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang,Taoyuan County 33383, Taiwan, R.O.C. The DECT VOIP Phone is in compliance with the FCC Report and Order 93- 326 and Health Canada Safety Code 6, and the tests were performed according to the FCC OET65c for uncontrolled exposure. Report No.: 11-09-MAS-087-03 Page 3 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 3 Table of Contents EXECUTIVE SUMMARY........................................................................................................................ 5 1 GENERAL INFORMATION............................................................................................................. 6 1.1 Description of Equipment Under Test ..................................................................................... 6 1.2 Photograph of EUT .................................................................................................................. 6 1.3 Environment Conditions .......................................................................................................... 7 1.4 FCC Requirements for SAR Compliance Testing ................................................................... 7 1.4.1 RF Exposure Limits ..........................................................................................................................7 1.5 The SAR Measurement Procudure for Mobile ........................................................................ 8 1.5.1 General Requirements.......................................................................................................................8 1.5.2 Phantom Requirements .....................................................................................................................8 1.5.3 Test Positions ....................................................................................................................................8 1.5.4 Test Procedures ...............................................................................................................................10 1.5.5 Test Procedures for Handset with Belt-Clip ......................................................................................10 2 DESCRIPTION OF THE TEST EQUIPMENT.................................................................................. 11 2.1 Test Equipment List ............................................................................................................... 11 2.2 DASY4 Measurement System Diagram ................................................................................ 12 2.3 DASY4 Measurement Server................................................................................................. 14 2.4 DAE (Data Acquisition Electronics)...................................................................................... 15 2.5 Phantom.................................................................................................................................. 16 2.6 Device Holder ........................................................................................................................ 17 2.7 Specifications of Probes ......................................................................................................... 18 2.8 SAR Measurement Procedures in DASY4 ............................................................................ 18 2.9 Simulating Liquids ................................................................................................................. 19 2.10 System Performance Check ................................................................................................... 19 2.10.1 Purpose .......................................................................................................................................19 2.10.2 System Performance Check Procedure.......................................................................................19 2.10.3 System Performance Check Setup ..............................................................................................20 2.10.4 Result of System Performance Check: Valid Result .....................................................…

Text truncated - open the document above for the full version.

Report No.: 11-09-MAS-087-03 Page 60 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 60 ANNEX C: DIPOLE CERTIFICATE Report No.: 11-09-MAS-087-03 Page 61 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 61 Report No.: 11-09-MAS-087-03 Page 62 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 62 Report No.: 11-09-MAS-087-03 Page 63 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 63 Report No.: 11-09-MAS-087-03 Page 64 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 64 Report No.: 11-09-MAS-087-03 Page 65 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 65 Report No.: 11-09-MAS-087-03 Page 66 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 66 Report No.: 11-09-MAS-087-03 Page 67 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 67 Report No.: 11-09-MAS-087-03 Page 68 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 68

Report No.: 11-09-MAS-087-03 Page 69 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 69 ANNEX D: PROBE CERTIFICATE Report No.: 11-09-MAS-087-03 Page 70 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 70 Report No.: 11-09-MAS-087-03 Page 71 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 71 Report No.: 11-09-MAS-087-03 Page 72 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 72 Report No.: 11-09-MAS-087-03 Page 73 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 73 Report No.: 11-09-MAS-087-03 Page 74 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 74 Report No.: 11-09-MAS-087-03 Page 75 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 75 Report No.: 11-09-MAS-087-03 Page 76 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 76 Report No.: 11-09-MAS-087-03 Page 77 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 77 Report No.: 11-09-MAS-087-03 Page 78 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 78 Report No.: 11-09-MAS-087-03 Page 79 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 79 Report No.: 11-09-MAS-087-03 Page 80 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 80 Report No.: 11-09-MAS-087-03 Page 81 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 81 Report No.: 11-09-MAS-087-03 Page 82 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 82 Report No.: 11-09-MAS-087-03 Page 83 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 83 Report No.: 11-09-MAS-087-03 Page 84 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 84 Report No.: 11-09-MAS-087-03 Page 85 of 85 FCC ID: YDBM9HS2 Electronics Testing Center, Taiwan (ETC) Rev. No.1.3 85

FCC ID: YDBM9HS2 Sheet 1 of 83 Sheets ETC Report No.: 11-09-MAS-087-01 Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. Rev. No 1.0 CONFORMANCE TEST REPORT FOR FCC Part 15, subpart D Report No.: 11-09-MAS-087-01 Client: Snom Technology AG Product: DECT VOIP Phone Model: Snom m9r FCC ID: YDBM9HS2 Manufacturer/supplier: GBM Group Date test item received: 2011/09/08 Date test campaign completed: 2011/10/04 Date of issue: 2011/10/26 The test result only corresponds to the tested sample. It is not permitted to copy this report, in part or in full, without the permission of the test laboratory. Total number of pages of this test report: 83 pages Total number of pages of photos: External photos 4 pages Internal photos 9 pages Setup photos 2 pages Test Engineer Checked By Approved By John Li James Cheng Winpo Tsai FCC ID: YDBM9HS2 Sheet 2 of 83 Sheets ETC Report No.: 11-09-MAS-087-01 Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. Rev. No 1.0 Table of Contents Page 1 GENARAL INFORMATION......................................................................................................... 4 1.1 Testing Laboratory..................................................................................................................... 4 1.2 Client Information....................................................................................................................... 4 1.3 Manufacturer...............................................................................................................................4 2 TEST INFORMATION................................................................................................................... 5 2.1 Description of Tested Device(s)............................................................................................... 5 2.2 Test Environment....................................................................................................................... 5 3 TEST REPORT SUMMARY......................................................................................................... 6 3.1 Test Summary............................................................................................................................ 6 3.2 Other Comments........................................................................................................................ 7 4 TEST SETUP.................................................................................................................................. 8 4.1 Frequency and Timing Measurements................................................................................... 8 4.2 Conducted Emission Tests....................................................................................................... 8 4.3 Radiated Emission Tests.......................................................................................................... 9 4.4 Power line Conducted Tests.................................................................................................... 9 4.5 Monitoring Tests....................................................................................................................... 10 5 TEST EQUIPMENT LIST............................................................................................................ 11 6 TEST RESULT............................................................................................................................. 12 6.1 Coordination with fixed microwave........................................................................................ 12 6.2 Cross Reference...................................................................................................................... 13 6.3 Labeling Requirements........................................................................................................... 15 6.4 Power line Conducted Emissions.......................................................................................... 16 6.5 Antenna Requirement............................................................................................................. 19 6.6 Digital Modulation Techniques............................................................................................... 19 6.7 Peak Transmit Power.............................................................................................................. 20 6.8 Power Spectral Density........................................................................................................... 24 6.9 Antenna Gain............................................................................................................................ 28 6.10 Automatic discontinuation of transmission......................................................................... 28 6.11 Safety exposure levels.......................................................................................................... 29 6.12 Emission Bandwidth B.......................................................................................................... 30 6.13 Monitoring time....................................................................................................................... 34 6.14 Monitoring threshold.............................................................................................................. 35 6.15 Maximum transmit period..................................................................................................... 36 6.16 System Acknowledgement................................................................................................... 38 FCC ID: YDBM9HS2 Sheet 3 of 83 Sheets ETC Report No.: 11-09-MAS-087-01 Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. Rev. No 1.0 6.17 Least Interfer…

Text truncated - open the document above for the full version.