YETCELFI-RS225WUCel-Fi Residential System

Cel-Fi ™ with IntelliBoost ™ Nextivity Incorporated Headquarters: 12230 World Trade Drive Suite 250 San Diego, CA 92128, USA http://www.nextivityinc.com Bureau en Europe: Whitehill Way Swindon, UK SN5 6QR Cel-Fi ™ with IntelliBoost ™ Nextivity Incorporated Headquarters: 12230 World Trade Drive Suite 250 San Diego, CA 92128, USA http://www.nextivityinc.com Bureau en Europe: Whitehill Way Swindon, UK SN5 6QR STOP!!! Do not call your carrier until you have read the Quick Start Guide. If you need more help, try visiting http://www.celfihelp.com Safety Precautions  Install Cel-Fi indoors. It should not be used outdoors.  These products are designed to be used with a direct plug-in power supply unit meeting SELV and “Limited Power Source” (NEC/CEC Class 2) requirements rated 12 Vdc, 1.66 A. When installing the equipment, all the requirements of the manufacturer and the referenced standards must be met.  There are no user serviceable parts inside. 420N005‐002‐001‐10 R01 CAUTION: Changes or modifications to this product not expressly approved by Nextivity may void your right to operate the equipment. STOP!!! Do not call your carrier until you have read the Quick Start Guide. If you need more help, try visiting http://www.celfihelp.com CAUTION: Changes or modifications to this product not expressly approved by Nextivity may void your right to operate the equipment. 420N005‐002‐001‐10 R01 Safety Precautions  Install Cel-Fi indoors. It should not be used outdoors.  These products are designed to be used with a direct plug-in power supply unit meeting SELV and “Limited Power Source” (NEC/CEC Class 2) requirements rated 12 Vdc, 1.66 A. When installing the equipment, all the requirements of the manufacturer and the referenced standards must be met.  There are no user serviceable parts inside. Limited Warranty; Warranties This Cel-Fi (Product) is distributed by your mobile carrier, and depending on their terms and conditions of sale, you may or may not have additional rights under a warranty program for Cel-Fi. This does not affect your statutory rights. All Products must be stored, carried, processed, installed or otherwise handled or dealt with by End User and its agents in accordance with Nextivity’s published instructions, and in accordance with normal safety procedures for the handling of Products, and Nextivity shall not be liable for any loss, damage, injury or expense arising out of the Products or their condition if this is not done. Nextivity shall not be liable to replace any Products rejected only on the grounds of immaterial imperfections or variations in the manufacturing process. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES WITH RESPECT TO THE PRODUCTS AND ANY DOCUMENTATION OR OTHER MATERIALS PROVIDED BY NEXTIVITY, EITHER EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, AND NONINFRINGEMENT, ALL OF WHICH ARE HEREBY DISCLAIMED. WITHOUT LIMITING THE FOREGOING, NEXTIVITY. DOES NOT WARRANT THAT THE HARDWARE WILL WORK PROPERLY IN ALL ENVIRONMENTS AND APPLICATIONS, NO PERSON IS AUTHORIZED TO REPRESENT, PROMISE OR ASSUME ANY OBLIGATION OR LIABILITY CONTRARY OR IN ADDITION TO THIS WARRANTY. Limitation of Liability In no event shall Nextivity, nor its directors, employees, agents, suppliers or End Users, be liable under contract, tort, strict liability, negligence or any other legal or equitable theory with respect to the Products or any other subject matter of this Agreement (i) for any lost profits, cost of procurement of substitute goods or services, or special, indirect, incidental, punitive, or consequential damages of any kind whatsoever or (ii) for any direct damages in excess of (in the aggregate) the fees actually received by Nextivity from End User with respect to the Products actually purchased and paid for. Intellectual Property End User agrees not to copy any product or process of Nextivity, or any part thereof, except with the express, prior written consent of Nextivity, given in its sole discretion. All risks of direct or indirect patent infringement are assumed by the End User. Nothing shall be construed as recommendation to make, use, or sell any Product or process in conflict with existing or future patents. End User shall not (and End User shall not permit anyone else to): (i) in any way reverse engineer or otherwise attempt to derive any source code or underlying ideas or algorithms from any part of the Products, except to the limited extent applicable laws specifically prohibit such restriction, (ii) modify, translate, or otherwise create derivative works of any part of the Products, or (iii) copy, rent, lease, distribute, or otherwise transfer any of the rights that End User receives hereunder. End User shall abide by all applicable local, state, national and international laws and regulations. Miscellaneous Cel-Fi, IntelliBoost, and Nextivity logo are trademarks of Nextivity, Inc. Copyright © 2011 by Nextivity, Inc. U.S. Patent 7,519,323 and other Patents Pending. All Rights Reserved. Reproduction or media conversion by any means is protected by copyright and may only occur with prior written permission of Nextivity. Declaration of Conformity We, Nextivity, Incorporated, 12230 World Trade Drive, Suite 250, San Diego, CA 92128, USA declare under our sole responsibility that the product(s): Product Description: Cel-Fi Residential (CELFI-RS2) Models: CELFI-RS218WU and CELFI-RS218CU, CELFI-RS225WU and CELFI-RS225CU to which this declaration relate(s) is(are) in conformance with the provisions of Directive 1999/5/EC governing Radio Equipment and Telecommunications Terminal Equipment and the Mutual Recognition of their Conformity using the following standards: SAFETY (art 3.1.a): EN 60950:2006 /A11:2009 /A1:2010 EMC: (art 3.1.b): EMC – (art 3.1.b): EN 301 489-1 v1.8.1, EN 301 489-17 v2.1.1, EN 301 489-23 v1.3.1, EN 62311:2008, SAR Touch Safe RADIO SPECTUM (art 3.2): EN 301 908-1 v5.2.1, EN 301 908-11 v5.2.1, E…

Text truncated - open the document above for the full version.

12230 World Trade Drive Suite 250 San Diego California 92128 858.485.9442 (main) 858-485.9445 (fax) [email protected] www.nextivityinc.com Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 4/11/2012 Dear Examiner: I am writing to avoid the possibility of an inadvertent disclosure of proprietary information. The accompanying Form 731 is being filed with the commission on our behalf by Elliott/NTS Laboratories, Inc., a consulting and testing laboratory. Included as exhibits with the enclosed application are block diagrams, BOMs, schematics, and a detailed description of the theory of operation of the device. It is our intention to provide the commission with a full disclosure of our product so that its merits can be evaluated. Indeed, we are pleased to provide any further information that the commission might wish to see. It is not our intention, however, to make our proprietary process a matter of public record. In view of the fact that the block diagrams, BOMs, schematics, and associated theory of operation disclose the mechanism of our process, we ask that these portions of our application be withheld from public inspection as provided under FCC sections 47 CFR 0.457 (d) and 47 CFR 0.459: • Block diagrams • BOMs • Schematics • Theory of operation These documents contain details of the proprietary operation of product. These details are not readily discernible - even to technically sophisticated individuals - from our hardware and constitute trade secrets. We request therefore that these documents be segregated from the body of our evaluation report and withheld from public inspection. Thank you for your attention. Please let the undersigned know if the Commission disagrees with our position or requires further justification. Sincerely, Michiel Lotter V.P. Engineering, Nextivity

287378 D01 Equipment Shipping Instructions v01 RETURN SHIPMENT AUTHORIZATION This completed form, along with a copy of the sample request letter and return shipping labels, must accompany all equipment. Failure to follow these instructions will delay testing of your equipment. All equipment and accessories, if any, must be listed and properly labeled. Type of Equipment FCC ID (if no FCC ID assigned, list model / type number) Serial Number Cel-Fi RS225 Window Unit CELFI-RS225WU 150201000108 Cel-Fi RS225 Coverage Unit CELFI-RS225CU 150201000108 Agilent 8960 “call box” 8960 Series 10 GB44350168 Please check if an additional sheet is used Michiel Lotter [email protected] Printed Name of Responsible Person Printed Email Address of Responsible Person Nextivity Inc. (858) 485-9442 Name of Company Telephone no. (Include area code – USA ONLY) Please check here if equipment is not to be returned. If equipment is to be returned, please complete the following: 12230 World Trade Drive, San Diego, CA. 92128 Complete shipping address, including ZIP code Preferred carrier for return shipment: FEDEX - 486524944 Name of company and your account number

Band 2+5 Window Unit

EMC Test Data Client: Contact: Standard: Test Specific Details General Test Configuration Yes Device complies with Power Density requirements at 20 ti Test Engineer: David Bare Calculation uses the free space transmission formula: S = (PG)/(4 πd 2 ) Where: S is power density (W/m 2 ), P is output power (W), G is antenna gain relative to isotropic, d is separation distance from the transmitting antenna (m). Summary of Results Maximum Permissible Exposure Objective: The objective of this test session is to perform final qualification testing of the EUT with respect to the specification listed above. Date of Test: 4/27/2012 Steve van Skike RSS 132, RSS 133, FCC Part 22, FCC Part 24 Class: - Nextivity IncJob Number: J86441 Model: RS225 WU and RS225 CU T-Log Number: T86829 Account Manager: Sheareen Washington Yes 20cm separation: T86829 Nextivity FCC 22 24 v01.xlsMPE CalcPage 1 of 3 EMC Test Data Client: Contact: Standard: Steve van Skike RSS 132, RSS 133, FCC Part 22, FCC Part 24 Class: - Nextivity IncJob Number: J86441 Model: RS225 WU and RS225 CU T-Log Number: T86829 Account Manager: Sheareen Washington Use: General Used for Multi ple Transmitters Peak AveragedBmWWdBm 869-894 WCDM A10.20.010.20.010530.03114.97 5470-5725OFDM20.65.526.10.407710.40726.10 40.43926.42 Power Density (S) @ 20cm (mW/cm^2)0.087 MPE Limit @ 20cm (mW/cm^2) 1.0 Distance at which S > MPE Limit 5.9cm CU unit (a transmitted "channel" for both WCDMA and OFDM consists of the 3 WCDMA sub channels or the 6 OFDM subchannels respectivel y. All sub channels were present during power measurements.) Output PowerAntenna EIRPChannels Channels Total EIRP Totals: CU unit (a transmitted "channel" for both WCDMA and OFDM consists of the 3 WCDMA sub channels or the 6 OFDM subchannels respectivel y. All sub channels were present during power measurements.) BandMode Output PowerAntenna gain (Max) EIRPChannels Available Channels Used Total EIRP PeakAveragedBmWWdBm 1930-1990 WCDMA10.00.010.00.010530.03014.77 5470-5725OFDM20.65.526.10.407710.40726.10 40.43726.41 Power Density (S) @ 20cm (mW/cm^2)0.087 MPE Limit @ 20cm (mW/cm^2) 1.0 Distance at which S > MPE Limit 5.9cm Totals: BandMode Output PowerAntenna gain (Max) EIRPChannels Available Channels Used Total EIRP T86829 Nextivity FCC 22 24 v01.xlsMPE CalcPage 2 of 3 EMC Test Data Client: Contact: Standard: Steve van Skike RSS 132, RSS 133, FCC Part 22, FCC Part 24 Class: - Nextivity IncJob Number: J86441 Model: RS225 WU and RS225 CU T-Log Number: T86829 Account Manager: Sheareen Washington PeakAveragedBmWWdBm 824-849 WCDM A17.34.421.70.148530.44426.47 5150-5350OFDM16.65.522.10.162510.16222.10 40.60627.82 Power Density (S) @ 20cm (mW/cm^2)0.121 MPE Limit @ 20cm (mW/cm^2) 1.0 Distance at which S > MPE Limit 6.9cm Peak AveragedBmWWdBm 1850-1910 WCDMA19.14.423.50.224530.67228.27 Totals: WU unit (a transmitted "channel" for both WCDMA and OFDM consists of the 3 WCDMA sub channels or the 6 OFDM subchannels respectivel y. All sub channels were present during power measurements.) BandMode Output PowerAntenna gain (Max) EIRPChannels Available Channels Used Total EIRP WU unit (a transmitted "channel" for both WCDMA and OFDM consists of the 3 WCDMA sub channels or the 6 OFDM subchannels respectivel y. All sub channels were present during power measurements.) BandMode Output PowerAntenna gain (Max) EIRPChannels Available Channels Used Total EIRP 5150-5350OFDM16.65.522.10.162510.16222.10 40.83429.21 Power Density (S) @ 20cm (mW/cm^2)0.166 MPE Limit @ 20cm (mW/cm^2) 1.0 Distance at which S > MPE Limit 8.1cm Totals: T86829 Nextivity FCC 22 24 v01.xlsMPE CalcPage 3 of 3

EMC Test Report Application for Grant of Equipment Authorization Industry Canada RSS-Gen Issue 3 / RSS 210 Issue 8 FCC Part 15, Subpart E CELFI-RS225WU IC CERTIFICATION #: 9298A-CRS225WU FCC ID: YETCELFI-RS225WU APPLICANT: Nextivity Inc. 12230 World Trade Drive Suite 250 San Diego, CA 92128 TEST SITE(S): Elliott Laboratories 41039 Boyce Road. Fremont, CA. 94538-2435 IC SITE REGISTRATION #: 2845B-3; 2845B-4, 2845B-5, 2845B-7 REPORT DATE: May 9, 2012 FINAL TEST DATES: March 14, 16 and 20 and April 1, 2012 TOTAL NUMBER OF PAGES: 49 PROGRAM MGR / QUALITY ASSURANCE DELEGATE / TECHNICAL REVIEWER: FINAL REPORT PREPARER: ______________________________ ______________________________ David W. Bare David Guidotti Chief Engineer Senior Technical Writer Elliott Laboratories is accredited by the A2LA, certificate number 0214.26, to perform the test(s) listed in this report, except where noted otherwise. This report and the information contained herein represent the results of testing test articles identified and selected by the client performed to specifications and/or procedures selected by the client. National Technical Systems (NTS) makes no representations, expressed or implied, that such testing is adequate (or inadequate) to demonstrate efficiency, performance, reliability, or any other characteristic of the articles being tested, or similar products. This report should not be relied upon as an endorsement or certification by NTS of the equipment tested, nor does it represent any statement whatsoever as to its merchantability or fitness of the test article, or similar products, for a particular purpose. This report shall not be reproduced except in full File: R87346 Page 1 Elliott Laboratories -- EMC Department Test Report Report Date: May 9, 2012 File: R87346 Page 2 REVISION HISTORY Rev# Date Comments Modified By - 05-09-2012 First release Elliott Laboratories -- EMC Department Test Report Report Date: May 9, 2012 File: R87346 Page 3 TABLE OF CONTENTS REVISION HISTORY ................................................................................................................................................ 2 TABLE OF CONTENTS ............................................................................................................................................ 3 SCOPE .......................................................................................................................................................................... 4 OBJECTIVE ................................................................................................................................................................ 5 STATEMENT OF COMPLIANCE ........................................................................................................................... 5 DEVIATIONS FROM THE STANDARDS .............................................................................................................. 5 TEST RESULTS SUMMARY ................................................................................................................................... 6 UNII / LELAN DEVICES ........................................................................................................................................ 6 GENERAL REQUIREMENTS APPLICABLE TO ALL BANDS .......................................................................... 7 MEASUREMENT UNCERTAINTIES .................................................................................................................... 8 EQUIPMENT UNDER TEST (EUT) DETAILS ...................................................................................................... 9 GENERAL ................................................................................................................................................................ 9 ANTENNA SYSTEM .............................................................................................................................................. 9 ENCLOSURE ........................................................................................................................................................... 9 MODIFICATIONS ................................................................................................................................................... 9 SUPPORT EQUIPMENT ......................................................................................................................................... 9 EUT INTERFACE PORTS .................................................................................................................................... 10 EUT OPERATION ................................................................................................................................................. 10 TEST SITE ................................................................................................................................................................. 11 GENERAL INFORMATION ................................................................................................................................. 11 CONDUCTED EMISSIONS CONSIDERATIONS .............................................................................................. 11 RADIATED EMISSIONS CONSIDERATIONS .................................................................................................. 11 MEASUREMENT INSTRUMENTATION ............................................................................................................ 12 RECEIVER SYSTEM ............................................................................................................................................ 12 INSTRUMENT CONTROL COMPUTER ............................................................................................................ 12 LINE IMPEDANCE STABILIZATION NETWORK (LISN) ............................................................................... 12 FILTERS/ATTENUATORS .....…

Text truncated - open the document above for the full version.

File: R87008 Rev. 1 Page 1 of 204 TEST REPORT Covering the DYNAMIC FREQUENCY SELECTION (DFS) REQUIREMENTS OF FCC Part 15 Subpart E (UNII), RSS-210 Annex 9 Nextivity Inc. Model(s): CELFI-RS225WU & CELFI-RS225CU COMPANY: Nextivity Inc. 12230 World Trade Drive Suite 250 San Diego, CA, 92128 TEST SITE: Elliott Laboratories 41039 Boyce Road Fremont, CA 94538 REPORT DATE: May 1, 2012 FINAL TEST DATE: March 26, 27, 2012 TEST ENGINEER: Wayne Fisher PROGRAM MGR / QUALITY ASSURANCE DELEGATE / TECHNICAL REVIEWER: FINAL REPORT PREPARER: ______________________________ ______________________________ David Bare David Guidotti Chief Engineer Senior Technical Writer Elliott Laboratories is accredited by the A2LA, certificate number 0214.26, to perform the test(s) listed in this report, except where noted otherwise. This report and the information contained herein represent the results of testing test articles identified and selected by the client performed to specifications and/or procedures selected by the client. National Technical Systems (NTS) makes no representations, expressed or implied, that such testing is adequate (or inadequate) to demonstrate efficiency, performance, reliability, or any other characteristic of the articles being tested, or similar products. This report should not be relied upon as an endorsement or certification by NTS of the equipment tested, nor does it represent any statement whatsoever as to its merchantability or fitness of the test article, or similar products, for a particular purpose. This report shall not be reproduced except in full Elliott Laboratories -- EMC Department Test Report Report Date: May 1, 2012 REVISION HISTORY Rev # Date Comments Modified By 1.0 05-01-2012 First Release - File: R87008 Rev. 1 Page 2 of 204 Elliott Laboratories -- EMC Department Test Report Report Date: May 1, 2012 TABLE OF CONTENTS REVISION HISTORY ................................................................................................................................................ 2 TABLE OF CONTENTS ............................................................................................................................................ 3 LIST OF TABLES ....................................................................................................................................................... 4 LIST OF FIGURES ..................................................................................................................................................... 7 SCOPE .......................................................................................................................................................................... 8 OBJECTIVE ................................................................................................................................................................ 8 STATEMENT OF COMPLIANCE ........................................................................................................................... 8 DEVIATIONS FROM THE STANDARD ................................................................................................................ 8 TEST RESULTS .......................................................................................................................................................... 9 TEST RESULTS SUMMARY – FCC PART 15, MASTER DEVICE ..................................................................... 9 MEASUREMENT UNCERTAINTIES .................................................................................................................. 13 EQUIPMENT UNDER TEST (EUT) DETAILS .................................................................................................... 14 GENERAL .............................................................................................................................................................. 14 ENCLOSURE ......................................................................................................................................................... 16 MODIFICATIONS ................................................................................................................................................. 16 SUPPORT EQUIPMENT ....................................................................................................................................... 16 EUT INTERFACE PORTS .................................................................................................................................... 16 EUT OPERATION ................................................................................................................................................. 17 RADAR WAVEFORMS ........................................................................................................................................... 18 DFS TEST METHODS ............................................................................................................................................. 19 RADIATED TEST METHOD ............................................................................................................................... 19 DFS MEASUREMENT INSTRUMENTATION .................................................................................................... 21 RADAR GENERATION SYSTEM ....................................................................................................................... 21 CHANNEL MONITORING SYSTEM .................................................................................................................. 22 DFS MEASUREMENT METHODS ....................................................................................................................... 23 DFS RADAR DETECTION BANDWIDTH ........................................................................................................ 23 DFS – CHANNEL CLOSING TRANSMISSION TIME AND CHANNEL MOVE TIME .............................…

Text truncated - open the document above for the full version.