YG7RF31200MWireless HD Net Connect Transmitter

Register your product and get support at www.philips.com/welcome EN User manual 3 ES Manual del usuario 21 FR Mode d’emploi 39 SWW1890 UYYAAWOA'0KPFF UYYAAWOA'0KPFF 3 Contents 1 Important 4 Safety 4 2 Your Philips Wireless HD Net Connect 6 What is in the box 6 3 Overview 7 The transmitter 7 The receiver 7 4 Installation 9 Connect the transmitter to your computer 9 Connect the receiver to the HDTV set 9 5 Activate your Philips Wireless HD Net Connect and set up the link 10 Turn on the power of your HDTV 10 Activate the wireless link 10 6 Mount your receiver 12 Mount your receiver on the wall 12 Mount your receiver on the back of the HDTV 13 7 Technical data 14 Supported resolution 14     14 8 Notice 15 Notice for USA 15 Notice for Canada 15 Recycling 16 One Year Limited Warranty 16 9 Frequently asked questions 17 EN English UYYAAWOA'0KPFF 4 Important Safety Instructions a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or              produce heat. i Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided           an electrician for replacement of the obsolete outlet. j Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. k          by the manufacturer.. l Unplug this apparatus during lightning storms or when unused for long periods of time. m              personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug 1 Important Safety This ‘bolt of lightning’ indicates uninsulated material within your unit may cause an electrical shock. The ‘exclamation mark’ calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. Warning  !     "       "  apparatus should not be exposed to rain or moisture  #$    %            be placed on this apparatus. Caution  To prevent electric shock, fully insert the plug. (For regions with polarized plugs: To prevent electric shock,  %  #  %  & EN UYYAAWOA'0KPFF 5 is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. n Apparatus shall not be exposed to dripping or splashing. o Do not place any sources of danger on the    &&      #$       & EN English UYYAAWOA'0KPFF 6 USB cable for the power supply of the     '   )   Power adapter for the receiver Anchors x 2 Screws x 2 Adhesive tape x 2 Quick Installation Guide Quick start guide User manual 2 Your Philips Wireless HD Net Connect Congratulations on your purchase and welcome to Philips! !  #        Philips offers, register your product at www.philips.com/welcome. What is in the box Note  Make sure you have all these items in the box. Contact your dealer for any missing or damaged items. Transmitter Receiver +8;< # =   EN UYYAAWOA'0KPFF 7 The receiver Top view 1 LED indicatorDisplays the status of the receiver. 2 Power button with LED indicator Press to turn the receiver on/off or to standby mode. 3INFO buttonDisplays on the HDTV the connection status of the receiver. Rear view 1DC IN connector Connect the power adapter of the receiver. 2HDMI OUT connector Connect to the HDTV with an HDMI cable 3 Overview The transmitter Front view POWER 1 LED indicator Displays the connection status of the transmitter. 2 USB power jack Connect the transmitter to the computer with the USB cable. Top view 1INFO button Displays on the HDTV the connection status of the transmitter. 2 HDMI IN connector Plug into the HDMI port of the computer. EN English UYYAAWOA'0KPFF 8 The Philips Wireless HD Net Connect gives you a total wireless solution to enjoy the content from your computer on your HDTV. The transmitter can transmit an uncompressed video content up to 20 feet (without obstruction between the transmitter      %   & !      receive signals for viewing on your HDTV. All you need to do is to:  Connect the transmitter to your computer.  Connect the receiver to your HDTV set. EN UYYAAWOA'0KPFF 9 3 Connect the other end of the USB cable to your the USB port of your computer. Note  For some computers, the HDMI and USB ports are located in different sides of the computer. »The power LED indicator of the     ?   #     into solid blue when the connection is established. Connect the receiver to the HDTV set HDMI HDMI 1 Connect the receiver with the supplied HDMI cable:  Connect one end of the HDMI cable to HDMI OUT connector of the receiver.  Connect the other end of the HDMI cable to the HDMI in connector of your HDTV. 2 Connect the power adapter to the receiver with the supplied power adapter :  Connect one end of the power adapter to the DC IN connector of the receiver.  Connect the other end of the power adapter to a power socket. 4 Installation Connect the transmitter to your computer a b c C…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT PHILIPS SAMPLE Page 2 Page 3 ZINWELL SAMPLE Page 4 Page 5

Wireless HD Net Connect Transmitter Model: SWW1890T /27 Input: DC 5V1A,5W Made in Taiwan 39.5 8.5 CAN IC:9078A-RF31200M FCC ID:YG7RF31200M Serial No.:CR1AYYWWXXXXXX

Page 1 CONSTRUCTION PHOTOS OF EUT PHILIPS SAMPLE Page 2 Page 3 Page 4 ZINWELL SAMPLE Page 5 Page 6

FCC ID: YG7RF31200M Report No.: RF110607C08 Operational Description This device is a wireless PC to TV transmission device, which operates in 5GHz band; the maximum data rate could be up to 500Mbps, which OFDM technique. The transmitter of the EUT is powered by the 5Vdc host device. The antenna is Chip antenna without antenna connector. The other instruction, please have a look at the users manual. FCC 15.407(c) states: The device shall automatically discontinue transmission in case of either absence of information to transmit or operational failure. These provisions are not intended to preclude the transmission of control or signaling information or the use of repetitive codes used by certain digital technologies to complete frame or burst intervals. Applicants shall include in their application for equipment authorization a description of how this requirement is met” Data transmission is always initiated by software, which is then pass down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets (ACKs, CTS, PSPoll, etc...) are initiated by the MAC. There are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets are being transmitted.

Report No.: SA110607C08 1 Report Format Version 4.0.0 SAR TEST REPORT (15.247) REPORT NO.: SA110607C08 MODEL NO.: SWW1890T /27 (refer to item 2.1 for more details) FCC ID: YG7RF31200M RECEIVED: May 27, 2011 TESTED: Jun. 24, 2011 ISSUED: Jul. 12, 2011 APPLICANT: Zinwell Corporation ADDRESS: 7F., No.512, Yuanshan Rd., Zhonghe Dist., New Taipei City 235, Taiwan (R.O.C.) ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 25 pages in total except Appendix. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Report No.: SA110607C08 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD...................................................................................................3 1. CERTIFICATION ..................................................................................................................4 2. GENERAL INFORMATION ..................................................................................................5 2.1 GENERAL DESCRIPTION OF EUT.....................................................................................5 2.2 GENERAL DESCRIPTION OF APPLIED STANDARDS ......................................................6 2.3 GENERAL INOFRMATION OF THE SAR SYSTEM ............................................................7 2.4 TEST EQUIPMENT ............................................................................................................10 2.5 GENERAL DESCRIPTION OF THE SPATIAL PEAK SAR EVALUATION ......................... 11 2.6 DESCRIPTION OF SUPPORT UNITS...............................................................................14 3. DESCRIPTION OF ANTENNA LOCATION ........................................................................15 4. RECIPES FOR TISSUE SIMULATING LIQUIDS ...............................................................16 5. SYSTEM VALIDATION.......................................................................................................19 5.1 TEST PROCEDURE ..........................................................................................................19 5.2 VALIDATION RESULTS .....................................................................................................20 5.3 SYSTEM VALIDATION UNCERTAINTIES .........................................................................21 6. TEST RESULTS .................................................................................................................22 6.1 TEST PROCEDURES ........................................................................................................22 6.2 CONDUCTED POWER......................................................................................................23 6.3 DESCRIPTION OF TEST CONDITION..............................................................................23 6.4 MEASURED SAR RESULTS .............................................................................................23 6.5 POWER DRIFT TABLE ......................................................................................................23 6.6 SAR LIMITS .......................................................................................................................24 7. INFORMATION ON THE TESTING LABORATORIES.......................................................25 APPENDIX A: TEST CONFIGURATIONS AND TEST DATA APPENDIX B: ADT SAR MEASUREMENT SYSTEM APPENDIX C: PHOTOGRAPHS OF SYSTEM VALIDATION APPENDIX D: SYSTEM CERTIFICATE & CALIBRATION Report No.: SA110607C08 3 Report Format Version 4.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED Original release NA Jul. 12, 2011 Report No.: SA110607C08 4 Report Format Version 4.0.0 1. CERTIFICATION PRODUCT: Wireless HD Net Connect Transmitter MODEL NO.: SWW1890T /27 (refer to item 2.1 for more details) BRAND: PHILIPS (refer to item 2.1 for more details) APPLICANT: Zinwell Corporation TESTED: Jun. 24, 2011 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1093) FCC OET Bulletin 65, Supplement C (01-01) RSS-102 Issue 4 (2010-03) The above equipment (model: SWW1890T /27, WHD100T) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE :Jul. 12, 2011 Joanna Wang / Senior Specialist APPROVED BY : , DATE :Jul. 12, 2011 Gary Chang / Assistant Manager Report No.: SA110607C08 5 Report Format Version 4.0.0 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT EUT Wireless HD Net Connect Transmitter MODEL NO. SWW1890T /27 (refer to NOTE for more details) FCC ID YG7RF31200M POWER SUPPLY 5Vdc MODULATION TECHNOLOGY OFDM TRANSFER RATE 500Mbps OPERATING FREQUENCY 5755 ~ 5795MHz NUMBER OF CHANNEL 2 MAXIMUM SAR (1g) 0.109mW/g ANTENNA TYPE TX: Chip antenna with 4.9dBi gain RX: Chip antenna with 6.2dBi gain ANTENNA CONNECTOR NA I/O PORTS USB DATA CABLE 0.5m shielded USB cable without core ACCESSORY DEVICES Adapter NOTE: 1. The following models are provided to this EUT. BRAND MODEL DESCRIPTION PHILIPS SWW1890T /27 ZINWELL WHD100T All models are electrically identical, different brand name, model name and its outward appearance are for marketing purpose. 2. Th…

Text truncated - open the document above for the full version.

Report No.: SA110607C08-1 1 Report Format Version 4.0.0 SAR TEST REPORT (15.407) REPORT NO.: SA110607C08-1 MODEL NO.: SWW1890T /27 (refer to item 2.1 for more details) FCC ID: YG7RF31200M RECEIVED: May 27, 2011 TESTED: Jun. 24, 2011 ISSUED: Jul. 12, 2011 APPLICANT: Zinwell Corporation ADDRESS: 7F., No.512, Yuanshan Rd., Zhonghe Dist., New Taipei City 235, Taiwan (R.O.C.) ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 26 pages in total except Appendix. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product, certification, approval or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Report No.: SA110607C08-1 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD.................................................................................................. 3 1. CERTIFICATION .............................................................................................................. 4 2. GENERAL INFORMATION .............................................................................................. 5 2.1 GENERAL DESCRIPTION OF EUT................................................................................. 5 2.2 GENERAL DESCRIPTION OF APPLIED STANDARDS .................................................. 6 2.3 GENERAL INOFRMATION OF THE SAR SYSTEM ........................................................ 7 2.4 TEST EQUIPMENT ........................................................................................................ 10 2.5 GENERAL DESCRIPTION OF THE SPATIAL PEAK SAR EVALUATION ..................... 11 2.6 DESCRIPTION OF SUPPORT UNITS........................................................................... 14 3. DESCRIPTION OF ANTENNA LOCATION .................................................................... 15 4. RECIPES FOR TISSUE SIMULATING LIQUIDS ........................................................... 16 5. SYSTEM VALIDATION................................................................................................... 19 5.1. TEST PROCEDURE ...................................................................................................... 19 5.2. VALIDATION RESULTS ................................................................................................. 20 5.3. SYSTEM VALIDATION UNCERTAINTIES ..................................................................... 21 6. TEST RESULTS ............................................................................................................. 22 6.1 TEST PROCEDURES .................................................................................................... 22 6.2 CONDUCTED POWER .................................................................................................. 24 6.3 DESCRIPTION OF TEST CONDITION.......................................................................... 24 6.4 MEASURED SAR RESULT............................................................................................ 24 6.5 POWER DRIFT TABLE .................................................................................................. 24 6.6 SAR LIMITS ................................................................................................................... 25 7. INFORMATION ON THE TESTING LABORATORIES ................................................... 26 APPENDIX A: TEST CONFIGURATIONS AND TEST DATA APPENDIX B: ADT SAR MEASUREMENT SYSTEM APPENDIX C: PHOTOGRAPHS OF SYSTEM VALIDATION APPENDIX D: SYSTEM CERTIFICATE & CALIBRATION Report No.: SA110607C08-1 3 Report Format Version 4.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED Original release NA Jul. 12, 2011 Report No.: SA110607C08-1 4 Report Format Version 4.0.0 1. CERTIFICATION PRODUCT: Wireless HD Net Connect Transmitter MODEL: SWW1890T /27 (refer to item 2.1 for more details) BRAND: PHILIPS (refer to item 2.1 for more details) APPLICANT: Zinwell Corporation TESTED: Jun. 24, 2011 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1093) FCC OET Bulletin 65, Supplement C (01-01) RSS-102 Issue 4 (March 2010) The above equipment (model: SWW1890T /27, WHD100T) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE :Jul. 12, 2011 Joanna Wang / Senior Specialist APPROVED BY : , DATE :Jul. 12, 2011 Gary Chang / Assistant Manager Report No.: SA110607C08-1 5 Report Format Version 4.0.0 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT EUT Wireless HD Net Connect Transmitter MODEL NO. SWW1890T /27 (refer to NOTE for more details) FCC ID YG7RF31200M POWER SUPPLY 5Vdc MODULATION TECHNOLOGY OFDM TRANSFER RATE 500Mbps OPERATING FREQUENCY 5190 ~ 5230MHz NUMBER OF CHANNEL 2 MAXIMUM SAR (1g) 0.068mW/g ANTENNA TYPE TX: Chip antenna with 4.9dBi gain RX: Chip antenna with 6.2dBi gain ANTENNA CONNECTOR NA I/O PORTS USB DATA CABLE 0.5m shielded USB cable without core ACCESSORY DEVICES Adapter NOTE: 1. The following models are provided to this EUT. BRAND MODEL DESCRIPTION PHILIPS SWW1890T /27 ZINWELL WHD100T All models are electrically identical, different brand name, model name and its outward appearance are for marketing purpose. 2. The EUT is a Wireless HD Net Connect Transmitter. Th…

Text truncated - open the document above for the full version.

Report No.: RF110607C08 1 Report Format Version 4.0.0 FCC TEST REPORT (15.247) REPORT NO.: RF110607C08 MODEL NO.: SWW1890T /27 (refer to item 3.1 for more details) FCC ID: YG7RF31200M RECEIVED: May 27, 2011 TESTED: May 27 ~ Jun. 23, 2011 ISSUED: Jul. 07, 2011 APPLICANT: Zinwell Corporation ADDRESS: 7F., No.512, Yuanshan Rd., Zhonghe Dist., New Taipei City 235, Taiwan (R.O.C.) ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 49 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Report No.: RF110607C08 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD...............................................................................................4 1. CERTIFICATION............................................................................................................5 2. SUMMARY OF TEST RESULTS ...................................................................................6 2.1 MEASUREMENT UNCERTAINTY.................................................................................6 3. GENERAL INFORMATION ............................................................................................7 3.1 GENERAL DESCRIPTION OF EUT ..............................................................................7 3.2 DESCRIPTION OF TEST MODES ................................................................................8 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST ...........................................................9 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ..............................10 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS .............................................12 3.4 DESCRIPTION OF SUPPORT UNITS ........................................................................12 4. TEST TYPES AND RESULTS .....................................................................................13 4.1 RADIATED EMISSION MEASUREMENT ...................................................................13 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT.................................................13 4.1.2 TEST INSTRUMENTS.................................................................................................14 4.1.3 TEST PROCEDURES .................................................................................................15 4.1.4 DEVIATION FROM TEST STANDARD........................................................................15 4.1.5 TEST SETUP...............................................................................................................16 4.1.6 EUT OPERATING CONDITIONS ................................................................................16 4.1.7 TEST RESULTS ..........................................................................................................17 4.2 CONDUCTED EMISSION MEASUREMENT ..............................................................21 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT............................................21 4.2.2 T EST INSTRUMENTS................................................................................................21 4.2.3 TEST PROCEDURES .................................................................................................22 4.2.4 DEVIATION FROM TEST STANDARD........................................................................22 4.2.5 TEST SETUP...............................................................................................................23 4.2.6 EUT OPERATING CONDITIONS ................................................................................23 4.2.7 TEST RESULTS ..........................................................................................................24 4.3 6DB BANDWIDTH MEASUREMENT ..........................................................................28 4.3.1 LIMITS OF 6DB BANDWIDTH MEASUREMENT .......................................................28 4.3.2 TEST INSTRUMENTS.................................................................................................28 4.3.3 TEST PROCEDURE....................................................................................................28 4.3.4 DEVIATION FROM TEST STANDARD........................................................................29 4.3.5 TEST SETUP...............................................................................................................29 4.3.6 EUT OPERATING CONDITIONS ................................................................................29 4.3.7 TEST RESULTS ..........................................................................................................30 4.4 MAXIMUM OUTPUT POWER .....................................................................................31 Report No.: RF110607C08 3 Report Format Version 4.0.0 4.4.1 LIMITS OF MAXIMUM OUTPUT POWER MEASUREMENT......................................31 4.4.2 INSTRUMENTS ...........................................................................................................31 4.4.3 TEST PROCEDURE....................................................................................................31 4.4.4 DEVIATION FROM TEST STANDARD........................................................................31 4.4.5 TEST SETUP...............................................................................................................32 4.4.6 EUT OPERATING CONDI…

Text truncated - open the document above for the full version.

Report No.: RF110607C08-1 1 Report Format Version 4.0.0 FCC TEST REPORT (15.407) REPORT NO.: RF110607C08-1 MODEL NO.: SWW1890T /27 (refer to item 3.1 for more details) FCC ID: YG7RF31200M RECEIVED: May 27, 2011 TESTED: May 27 ~ Jun. 23, 2011 ISSUED: Jul. 07, 2011 APPLICANT: Zinwell Corporation ADDRESS: 7F., No.512, Yuanshan Rd., Zhonghe Dist., New Taipei City 235, Taiwan (R.O.C.) ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 53 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Report No.: RF110607C08-1 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD.............................................................................................. 4 1. CERTIFICATION........................................................................................................... 5 2. SUMMARY OF TEST RESULTS .................................................................................. 6 2.1 MEASUREMENT UNCERTAINTY................................................................................ 6 3. GENERAL INFORMATION ........................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................. 7 3.2 DESCRIPTION OF TEST MODES ............................................................................... 8 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST .......................................................... 9 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................. 10 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................ 12 3.4 DESCRIPTION OF SUPPORT UNITS ....................................................................... 12 4. TEST TYPES AND RESULTS .................................................................................... 13 4.1 RADIATED EMISSION MEASUREMENT .................................................................. 13 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT................................................ 13 4.1.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS .............. 13 4.1.3 TEST INSTRUMENTS................................................................................................ 14 4.1.4 TEST PROCEDURES ................................................................................................ 15 4.1.5 DEVIATION FROM TEST STANDARD....................................................................... 15 4.1.6 TEST SETUP.............................................................................................................. 16 4.1.7 EUT OPERATING CONDITION.................................................................................. 16 4.1.8 TEST RESULTS ......................................................................................................... 17 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................. 21 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT........................................... 21 4.2.2 TEST INSTRUMENTS................................................................................................ 21 4.2.3 TEST PROCEDURES ................................................................................................ 22 4.2.4 DEVIATION FROM TEST STANDARD....................................................................... 22 4.2.5 TEST SETUP.............................................................................................................. 23 4.2.6 EUT OPERATING CONDITIONS ............................................................................... 23 4.2.7 TEST RESULTS ...........…

Text truncated - open the document above for the full version.