YG7ZRF31200Wireless HD AV Connect Transmitter

Register your product and get support at www.philips.com/welcome SWW1810 EN User manual 3 ES Manual del usuario 21 FR Mode d’emploi 41 UYYAAWOA'0KPFF UYYAAWOA'0KPFF 3 Contents 1 Important 4 Safety 4 2 Your Wireless HD AV Connect 6 What is in the box 6 3 Overview 7 The transmitter 7 The receiver 7 The remote control 8 4 Installation 9 Connect the transmitter to your HD devices 9 Connect the receiver to the HDTV set 9 Connect the IR blaster and IR sensor extender cables 10 Install remote control batteries 10 5 Activate your Wireless HD AV Connect and set up the link 11 Turn on the power of your HDTV 11 Activate the wireless link 12 6 Mount your receiver 13 Mount your receiver on the wall 13 Mount your receiver on the back of the HDTV 14 7 Technical data 15 Supported resolution 15     15 8 Notice 16 Notice for USA 16 Notice for Canada 16 Recycling 17 Disposal of your old product and batteries 17 One Year Limited Warranty 17 9 Frequently asked question 18 EN English UYYAAWOA'0KPFF 4 e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or              produce heat. i Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided           an electrician for replacement of the obsolete outlet. j Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. k          by the manufacturer.. l Use only with the cart, stand, tripod,          manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. m Unplug this apparatus during lightning storms or when unused for long periods of time. 1 Important Safety This ‘bolt of lightning’ indicates uninsulated material within your unit may cause an electrical shock. The ‘exclamation mark’ calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. Warning                apparatus should not be exposed to rain or moisture  !    "   #     $    be placed on this apparatus. Caution  To prevent electric shock, fully insert the plug. (For regions with polarized plugs: To prevent electric shock,  "    "  % Important Safety Instructions a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. EN UYYAAWOA'0KPFF 5 n &    $    #   $    % ' $    #   "  the apparatus has been damaged in any way, such as power-supply cord or plug    #        objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. o Battery usage CAUTION – To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit:  Do not mix batteries (old and new or      %%  Remove batteries when the unit is not used for a long time. p Apparatus shall not be exposed to dripping or splashing. q Do not place any sources of danger on the    %%  #    !       % Warning  Use only the provided power adapter. EN English UYYAAWOA'0KPFF 6 HDMI cable IR blaster extender cable Power adapter for the transmitter and receiver x 2 IR sensor extender cable Anchors x 2Screws x 2 Quick Installation Guide Adhesive tape x 2Quick start guide User manual 2 Your Wireless HD AV Connect Congratulations on your purchase and welcome to Philips!             offers, register your product at www.philips. com/welcome. What is in the box Note  Make sure you have all these items in the box. Contact your dealer for any missing or damaged items. Transmitter Receiver Remote control EN UYYAAWOA'0KPFF 7 The receiver Top view 1Source LEDs Indicators for HDMI1 and HDMI2 2Power button with the LED indicator Press to turn the receiver on/off. 3Source button Press to select the source input. Rear view 1DC IN jack Connect the power adapter of the receiver. 2HDMI OUT adapter Connect the HDTV with an HDMI cable. 3IR IN jack Plug in the IR sensor extender cable. 3 Overview The transmitter Front view 1Source LEDs It displays the current source input. 2SOURCE button Press to switch the source input of the transmitter. 3Power button with the LED indicator Press to turn the transmitter on/off Rear view POWER 1DC IN jack Connect the power adapter of the transmitter. 2 & 3HDMI IN adapters Connect the HD audio/ video device with the HDMI cables. 4IR OUT blaster extender jack Plug in the IR blaster extender cable. EN English UYYAAWOA'0KPFF 8 The remote control 1POWER button Press to turn the transmitter and receiver on/off. 2INFO button Displays on the HDTV the connection status of the receiver. 3IR button Press to switch the IR     #       #      source device. 4SOURCE button Press to switch the audio/video source inputs connected to the transmitter. The Wireless HD AV Connect gives you a total wireless solution to place your HDTV set or projector anywhere you want. The transmitter can transmit an uncompressed video content over 65 feet without latency. The receiver can r…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT For PHILIPS Page 2 Page 3 Page 4 Page 9 For ZINWELL Page 10 Page 11 Page 12

Wireless HD AV Connect Transmitter Model: SWW1810T /27 Input: DC 5V2A,10W FCC ID:YG7ZRF31200 CAN IC:9078A-ZRF31200 Made in Taiwan For applicable power supplies, see user instructions. Philips Consumer Lifestyle P. O. Box 10313 Stamford, CT 06904, U.S.A 51.0 42.0 ' This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la class B est conforme a la norme NMB-003 du Canada. '

Page 5 Page 6 Page 7 Page 8 Page 13 Page 14 Page 15 Page 16

FCC ID: YG7ZRF31200 Report No.: RF110607C09 Operational Description This device is a wireless HD AV connect transmitter, which operates in 5GHz band; the maximum data rate could be up to 1Gbps, which OFDM technique. The transmitter of the EUT is powered by the 5Vdc from adapter. The antenna is Printed antenna without antenna connector. The other instruction, please have a look at the users manual. FCC 15.407(c) states: The device shall automatically discontinue transmission in case of either absence of information to transmit or operational failure. These provisions are not intended to preclude the transmission of control or signaling information or the use of repetitive codes used by certain digital technologies to complete frame or burst intervals. Applicants shall include in their application for equipment authorization a description of how this requirement is met” Data transmission is always initiated by software, which is then pass down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets (ACKs, CTS, PSPoll, etc...) are initiated by the MAC. There are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets are being transmitted.

Report No.: SA110607C09 Report Format Version 4.0.0 1 RF EXPOSURE REPORT REPORT NO.: SA110607C09 MODEL NO.: SWW1810T /27, WHD200T FCC ID: YG7ZRF31200 APPLICANT: Zinwell Corporation ADDRESS: 7F., No. 512, Yuanshan Rd., Zhonghe Dist., New Taipei City 235, Taiwan (R.O.C.) ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 6 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced, except in full, without the written approval of our laboratory. The client should not use it to claim product, certification, approval, or endorsement by any government agency. The test results in the report only apply to the tested sample. Report No.: SA110607C09 Report Format Version 4.0.0 2 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................. 3 1. CERTIFICATION .......................................................................................................... 4 2. RF EXPOSURE............................................................................................................ 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE)...................................... 5 2.2 MPE CALCULATION FORMULA ................................................................................. 5 2.3 CLASSIFICATION ........................................................................................................ 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER............................... 6 Report No.: SA110607C09 Report Format Version 4.0.0 3 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED Original release NA Jun. 29, 2011 Report No.: SA110607C09 Report Format Version 4.0.0 4 1. CERTIFICATION PRODUCT: Wireless HD AV Connect Transmitter MODEL: SWW1810T /27, WHD200T BRAND: PHILIPS, ZINWELL APPLICANT: Zinwell Corporation TESTED: Jun. 03 ~ Jun. 24, 2011 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: SWW1810T /27, WHD200T) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE:Jun. 29, 2011 Andrea Hsia / Specialist APPROVED BY : , DATE:Jun. 29, 2011 Gary Chang / Assistant Manager Report No.: SA110607C09 Report Format Version 4.0.0 5 2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA110607C09 Report Format Version 4.0.0 6 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 5190-5320 16.6 4 20 0.023 1 5755-5795 25.8 4 20 0.190 1

Report No.: RF110607C09 1 Report Format Version 4.0.0 FCC TEST REPORT (15.247) REPORT NO.: RF110607C09 MODEL NO.: SWW1810T /27 (refer to item 3.1 for more detail) FCC ID: YG7ZRF31200 RECEIVED: Jun. 02, 2011 TESTED: Jun. 03 ~ Jun. 24, 2011 ISSUED: Jun. 29, 2011 APPLICANT: Zinwell Corporation ADDRESS: 7F., No. 512, Yuanshan Rd., Zhonghe Dist., New Taipei City 235, Taiwan (R.O.C.) ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 55 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Report No.: RF110607C09 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD.............................................................................................. 4 1. CERTIFICATION........................................................................................................... 5 2. SUMMARY OF TEST RESULTS .................................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ............................................................................... 6 3. GENERAL INFORMATION ........................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................. 7 3.2 DESCRIPTION OF TEST MODES ............................................................................... 9 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST .......................................................... 9 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................. 10 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................ 12 3.4 DESCRIPTION OF SUPPORT UNITS ....................................................................... 12 4. TEST TYPES AND RESULTS .................................................................................. 13 4.1 RADIATED EMISSION MEASUREMENT .................................................................. 13 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT................................................ 13 4.1.2 TEST INSTRUMENTS................................................................................................ 14 4.1.3 TEST PROCEDURES ................................................................................................ 15 4.1.4 DEVIATION FROM TEST STANDARD....................................................................... 15 4.1.5 TEST SETUP.............................................................................................................. 16 4.1.6 EUT OPERATING CONDITIONS ............................................................................... 16 4.1.7 TEST RESULTS ......................................................................................................... 17 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................. 21 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT........................................... 21 4.2.2 T EST INSTRUMENTS............................................................................................... 21 4.2.3 TEST PROCEDURES ................................................................................................ 22 4.2.4 DEVIATION FROM TEST STANDARD....................................................................... 22 4.2.5 TEST SETUP.............................................................................................................. 23 4.2.6 EUT OPERATING CONDITIONS ............................................................................... 23 4.2.7 TEST RESULTS ......................................................................................................... 24 4.3 6dB BANDWIDTH MEASUREMENT.......................................................................... 28 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ....................................................... 28 4.3.2 TEST INSTRUMENTS................................................................................................ 28 4.3.3 TEST PROCEDURE................................................................................................... 28 4.3.4 DEVIATION FROM TEST STANDARD....................................................................... 29 4.3.5 TEST SETUP.............................................................................................................. 29 4.3.6 EUT OPERATING CONDITIONS ............................................................................... 29 4.3.7 TEST RESULTS ......................................................................................................... 30 4.4 MAXIMUM OUTPUT POWER .................................................................................... 31 4.4.1 LIMITS OF MAXIMUM OUTPUT POWER MEASUREMENT..................................... 31 4.4.2 INSTRUMENTS .......................................................................................................... 31 4.4.3 TEST PROCEDURES ................................................................................................ 31 4.4.4 DEVIATION FROM TEST STANDARD....................................................................... 31 4.4.5 TEST SETUP.............................................................................................................. 32 4.4.6 EUT OPERATING CONDITIONS .................................................…

Text truncated - open the document above for the full version.

Report No.: RF110607C09-1 1 Report Format Version 4.0.0 FCC TEST REPORT (15.407) REPORT NO.: RF110607C09-1 MODEL NO.: SWW1810T /27 (refer to item 3.1 for more detail) FCC ID: YG7ZRF31200 RECEIVED: Jun. 02, 2011 TESTED: Jun. 03 ~ Jun. 24, 2011 ISSUED: Jun. 29, 2011 APPLICANT: Zinwell Corporation ADDRESS: 7F., No. 512, Yuanshan Rd., Zhonghe Dist., New Taipei City 235, Taiwan (R.O.C.) ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 59 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Report No.: RF110607C09-1 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD.............................................................................................. 4 1. CERTIFICATION........................................................................................................... 5 2. SUMMARY OF TEST RESULTS .................................................................................. 6 2.1 MEASUREMENT UNCERTAINTY................................................................................ 6 3. GENERAL INFORMATION ........................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................. 7 3.2 DESCRIPTION OF TEST MODES ............................................................................... 9 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST .......................................................... 9 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................. 10 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................ 12 3.4 DESCRIPTION OF SUPPORT UNITS ....................................................................... 12 4. TEST TYPES AND RESULTS .................................................................................... 13 4.1 RADIATED EMISSION MEASUREMENT .................................................................. 13 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT................................................ 13 4.1.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS .............. 13 4.1.3 TEST INSTRUMENTS................................................................................................ 14 4.1.4 TEST PROCEDURES ................................................................................................ 15 4.1.5 DEVIATION FROM TEST STANDARD....................................................................... 15 4.1.6 TEST SETUP.............................................................................................................. 16 4.1.7 EUT OPERATING CONDITION.................................................................................. 16 4.1.8 TEST RESULTS ......................................................................................................... 17 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................. 21 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT........................................... 21 4.2.2 TEST INSTRUMENTS................................................................................................ 21 4.2.3 TEST PROCEDURES ................................................................................................ 22 4.2.4 DEVIATION FROM TEST STANDARD....................................................................... 22 4.2.5 TEST SETUP.............................................................................................................. 23 4.2.6 EUT OPERATING CONDITIONS ............................................................................... 23 4.2.7 TEST RESULTS ......................................................................................................... 24 4.3 PEAK TRANSMIT POWER MEASUREMENT ........................................................... 28 4.3.1 LIMITS OF PEAK TRANSMIT POWER MEASUREMENT ......................................... 28 4.3.2 TEST INSTRUMENTS................................................................................................ 28 4.3.3 TEST PROCEDURE................................................................................................... 29 4.3.4 DEVIATION FROM TEST STANDARD....................................................................... 29 4.3.5 TEST SETUP.............................................................................................................. 29 4.3.6 EUT OPERATING CONDITIONS ............................................................................... 29 4.3.7 TEST RESULTS ......................................................................................................... 30 4.4 PEAK POWER EXCURSION MEASUREMENT ........................................................ 31 4.4.1 LIMITS OF PEAK POWER EXCURSION MEASUREMENT...................................... 31 4.4.2 TEST INSTRUMENTS................................................................................................ 31 4.4.3 TEST PROCEDURE................................................................................................... 31 4.4.4 DEVIATION FROM TEST STANDARD....................................................................... 32 4.4.5 TEST SETUP.............................................................................................................. 32 4.4.6 EUT OPERATING CONDITI…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Test Mode A 2 Test Mode B 3 RADIATED EMISSION TEST Test Mode A 4 Test Mode B