YHLBLUG72MXSmart Phone

-1- Content 1 General Information ................................................................................................................................................................................................................................................. 3 1.1 Profile ................................................................................................................................................................................................................................................................. 3 1.2 Safety warning and Attentions ........................................................................................................................................................................................................................... 3 2 Your phone ................................................................................................................................................................................................................................................................. 6 2.1 Phone overview ................................................................................................................................................................................................................... ................................6 2.2 F unctions of Keys ............................................................................................................................................................................................................................................... 6 2.3 Functions of icons ............................................................................................................................................................................................................................................... 6 3 Getting started ........................................................................................................................................................................................................................................................... 7 3.1 Installing the SIM Card and the Battery ............................................................................................................................................................................................................. 7 3.2 Charging the Battery ........................................................................................................................................................................................................................................... 7 3.3 Linking to the Networks and devices ................................................................................................................................................................................................................. 8 3.4 Using the touch screen ........................................................................................................................................................................................................................................ 9 3.5 Using the onscreen keypad ............................................................................................................................................................................................................................... 10 3.6 Dialing Calls ...................................................................................................................................................................................................................................................... 11 4 Using the Menus ................................................................................................................................................................................................................................ ...................... 12 -2- 4.1 Browser ............................................................................................................................................................................................................................................................. 12 4.2 Calculator .......................................................................................................................................................................................................................................................... 12 4.3 Calendar ............................................................................................................................................................................................................................................................ 12 4.4 Call History ....................................................................................................................................................................................................................................................... 13 4.5 CallFireWall ...................................................................................................................................................................................................................................................... 13 4.6 Camera .............................................................................................................................................................................................................................................................. 14 4.7 Clock ................................................................................................................................................................................................................................................................. 14 4.8 Contacts ....................................................................................................................................…

Text truncated - open the document above for the full version.

C5266091_X8_Ed.1 1/1 BLU Products, Inc. 10814 NW 33rd St # 100 Doral, FL 33172, USA Letter of Authorization Company: BLU Products, Inc. Address: 10814 NW 33rd St # 100 Doral, FL 33172, USA Product Name: Smart Phone Model Number: G72 MAX FCC Identifier: YHLBLUG72MX We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Wei Zeng Date: Nov. 15, 2022 Title: Senior Manager Signature of applicant:

C5266091_X10_Ed.1 1/1 BLU Products, Inc. 10814 NW 33rd St # 100 Doral, FL 33172, USA Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: Nov. 15, 2022 Subject: Request for Confidentiality FCC ID: YHLBLUG72MX To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality ID Label/Location No No Attestation Statement No No External Photos No Block Diagram Schematics Test Report No No Test Setup Photos No User’s Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) No No SDR Software / Security Info No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Name: Wei Zeng Date: Nov. 15, 2022 Title: Senior Manager Signature of applicant:

C5266091_X13_Ed.1 1/1 BLU Products, Inc. 10814 NW 33rd St # 100 Doral, FL 33172, USA FCC Software Configuration Control Declaration Date: Nov. 15, 2022 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. Product Name: Smart Phone Model Number: G72 MAX Regarding FCC Country Code Selection guidelines identified in KDB 594280. “All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified.” We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Wei Zeng Date: Nov. 15, 2022 Title: Senior Manager Signature of applicant:

Page 1 of 6 FCC ID: YHLBLUG72MX Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT EXTERNAL PHOTOS EUT Photo EUT Photo Page 2 of 6 FCC ID: YHLBLUG72MX Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 3 of 6 FCC ID: YHLBLUG72MX Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 4 of 6 FCC ID: YHLBLUG72MX Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 5 of 6 FCC ID: YHLBLUG72MX Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 6 of 6 FCC ID: YHLBLUG72MX Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo

Label Location

Page 1 of 10 FCC ID: YHLBLUG72MX Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT INTERNAL PHOTOS EUT Photo EUT Photo WWAN DIV Ant. (TX Bands: >1GHz Bands) WLAN/BT/GPS Antenna WWAN Main Antenna (TX Bands: < 1GHz Bands) Page 2 of 10 FCC ID: YHLBLUG72MX Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 3 of 10 FCC ID: YHLBLUG72MX Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 4 of 10 FCC ID: YHLBLUG72MX Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 5 of 10 FCC ID: YHLBLUG72MX Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 6 of 10 FCC ID: YHLBLUG72MX Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 7 of 10 FCC ID: YHLBLUG72MX Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 8 of 10 FCC ID: YHLBLUG72MX Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 9 of 10 FCC ID: YHLBLUG72MX Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 10 of 10 FCC ID: YHLBLUG72MX Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo

Test Laboratory: UnionTrust Date/Time: 2022/10/21 System Check_H750_10dBm DUT: Dipole 750 MHz Communication System: CW; Frequency: 750 MHz;Duty Cycle: 1:1 Medium: H750 Medium parameters used: f = 750 MHz; σ = 0.865 mho/m; ε r = 40.2; ρ = 1000 kg/m 3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(6.28, 6.28, 6.28); Calibrated: 2022/4/6 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2022/3/24 - Phantom: SAM 2; Type: QD 000 P40 CB; Serial: TP/1376 - Postprocessing SW: SEMCAD, V1.8 Build 186 System check/Area Scan (51x71x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.098 mW/g System check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 10.4 V/m; Power Drift = 0.058 dB Peak SAR (extrapolated) = 0.124 W/kg SAR(1 g) = 0.082 mW/g; SAR(10 g) = 0.056 mW/g Maximum value of SAR (measured) = 0.098 mW/g 0 dB = 0.098mW/g Test Laboratory: UnionTrust Date/Time: 2022/10/20 System Check_H835_10dBm DUT: Dipole 835 MHz Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: H835 Medium parameters used: f = 835 MHz; σ = 0.919 mho/m; ε r = 39.5; ρ = 1000 kg/m 3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(6.12, 6.12, 6.12); Calibrated: 2022/4/6 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2022/3/24 - Phantom: SAM 2; Type: QD 000 P40 CB; Serial: TP/1376 - Postprocessing SW: SEMCAD, V1.8 Build 186 System check/Area Scan (51x71x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.108 mW/g System check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 11.2 V/m; Power Drift = -0.003 dB Peak SAR (extrapolated) = 0.135 W/kg SAR(1 g) = 0.098 mW/g; SAR(10 g) = 0.068 mW/g Maximum value of SAR (measured) = 0.108 mW/g 0 dB = 0.108mW/g Test Laboratory: UnionTrust Date/Time: 2022/11/8 System Check_H1750_10dBm DUT: Dipole 1750 MHz Communication System: CW; Frequency: 1750 MHz;Duty Cycle: 1:1 Medium: H1750 Medium parameters used: f = 1750 MHz; σ = 1.31 mho/m; ε r = 39.7; ρ = 1000 kg/m 3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(5.36, 5.36, 5.36); Calibrated: 2022/4/6 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2022/3/24 - Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378 - Postprocessing SW: SEMCAD, V1.8 Build 186 System check/Area Scan (51x71x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.478 mW/g System check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 18.5 V/m; Power Drift = 0.026 dB Peak SAR (extrapolated) = 0.625 W/kg SAR(1 g) = 0.372 mW/g; SAR(10 g) = 0.216 mW/g Maximum value of SAR (measured) = 0.445 mW/g 0 dB = 0.445mW/g Test Laboratory: UnionTrust Date/Time: 2022/11/7 System Check_H1900_10dBm DUT: Dipole 1900 MHz Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: H1900 Medium parameters used: f = 1900 MHz; σ = 1.44 mho/m; ε r = 39.3; ρ = 1000 kg/m 3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(5.08, 5.08, 5.08); Calibrated: 2022/4/6 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2022/3/24 - Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378 - Postprocessing SW: SEMCAD, V1.8 Build 186 System check/Area Scan (51x71x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.496 mW/g System check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 17.4 V/m; Power Drift = 0.110 dB Peak SAR (extrapolated) = 0.659 W/kg SAR(1 g) = 0.386 mW/g; SAR(10 g) = 0.218 mW/g Maximum value of SAR (measured) = 0.462 mW/g 0 dB = 0.462mW/g Test Laboratory: UnionTrust Date/Time: 2022/10/19 System Check_H2450_10dBm DUT: Dipole 2450 MHz Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: H2450 Medium parameters used: f = 2450 MHz; σ = 1.81 mho/m; ε r = 37.8; ρ = 1000 kg/m 3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(4.57, 4.57, 4.57); Calibrated: 2022/4/6 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2022/3/24 - Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378 - Postprocessing SW: SEMCAD, V1.8 Build 186 System check/Area Scan (51x71x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.717 mW/g System check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 18.9 V/m; Power Drift = 0.073 dB Peak SAR (extrapolated) = 0.991 W/kg SAR(1 g) = 0.504 mW/g; SAR(10 g) = 0.248 mW/g Maximum value of SAR (measured) = 0.641 mW/g 0 dB = 0.641mW/g Test Laboratory: UnionTrust Date/Time: 2022/11/9 System Check_H2600_10dBm DUT: Dipole 2600 MHz Communication System: CW; Frequency: 2600 MHz;Duty Cycle: 1:1 Medium: H2600 Medium parameters used: f = 2600 MHz; σ = 1.99 mho/m; ε r = 37.2; ρ = 1000 kg/m 3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(4.45, 4.45, 4.45); Calibrated: 2022/4/6 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2022/3/24 - Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378 - Postprocessing SW: SEMCAD, V1.8 Build 186 System check/Area Scan (51x71x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.760 mW/g System check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 17.6 V/m; Power Drift = 0.136 dB Peak SAR (extrapolated) = 1.16 W/kg SAR(1 g) = 0.527 mW/g; SAR(10 g) = 0.243 mW/g Maximum value of SAR (measured) = 0.696 mW/g 0 dB = 0.696mW/g Test Laboratory: UnionTrust Date/Time: 2022/10/26 System Check_H5250_10dBm DUT: Dipole 5G Hz Communication System: CW-New; Frequency: 5250 MHz;Duty Cycle: 1:1 Medium: H5250 Medium parameters used: f = 5250 MHz; σ = 4.83 mho/m; ε r = 36.1; ρ = 1000 kg/m 3 DASY4 Configuration: - Probe: EX3DV4 - SN3818; ConvF(5.55, 5.55, 5.55); Calibrated: 2022/8/6 - Sensor-Su…

Text truncated - open the document above for the full version.

Test Laboratory: UnionTrust Date/Time: 2022/10/20 GSM850_GPRS12_Right Cheek_190 DUT: EUT Communication System: GPRS 850-4solt; Frequency: 836.6 MHz;Duty Cycle: 1:2 Medium: H835 Medium parameters used: f = 837 MHz; σ = 0.92 mho/m; ε r = 39.5; ρ = 1000 kg/m 3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(6.12, 6.12, 6.12); Calibrated: 2022/4/6 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2022/3/24 - Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378 - Postprocessing SW: SEMCAD, V1.8 Build 186 Area Scan (71x81x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.429 mW/g Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 6.48 V/m; Power Drift = 0.092 dB Peak SAR (extrapolated) = 0.501 W/kg SAR(1 g) = 0.388 mW/g; SAR(10 g) = 0.290 mW/g Maximum value of SAR (measured) = 0.427 mW/g 0 dB = 0.427mW/g Test Laboratory: UnionTrust Date/Time: 2022/11/7 GSM1900_GPRS12_Left Cheek_661 DUT: EUT Communication System: GPRS1900-4slots; Frequency: 1880 MHz;Duty Cycle: 1:2 Medium: H1900 Medium parameters used: f = 1880 MHz; σ = 1.43 mho/m; ε r = 39.4; ρ = 1000 kg/m 3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(5.08, 5.08, 5.08); Calibrated: 2022/4/6 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2022/3/24 - Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378 - Postprocessing SW: SEMCAD, V1.8 Build 186 Area Scan (71x81x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.069 mW/g Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 2.39 V/m; Power Drift = 0.039 dB Peak SAR (extrapolated) = 0.090 W/kg SAR(1 g) = 0.057 mW/g; SAR(10 g) = 0.035 mW/g Maximum value of SAR (measured) = 0.067 mW/g 0 dB = 0.067mW/g Test Laboratory: UnionTrust Date/Time: 2022/11/8 WCDMA II_RMC12.2K_Left Cheek_9400 DUT: EUT Communication System: WCDMA Band II; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: H1900 Medium parameters used: f = 1880 MHz; σ = 1.43 mho/m; ε r = 39.4; ρ = 1000 kg/m 3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(5.08, 5.08, 5.08); Calibrated: 2022/4/6 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2022/3/24 - Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378 - Postprocessing SW: SEMCAD, V1.8 Build 186 Area Scan (71x81x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.116 mW/g Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.60 V/m; Power Drift = 0.032 dB Peak SAR (extrapolated) = 0.149 W/kg SAR(1 g) = 0.096 mW/g; SAR(10 g) = 0.059 mW/g Maximum value of SAR (measured) = 0.112 mW/g 0 dB = 0.112mW/g Test Laboratory: UnionTrust Date/Time: 2022/11/7 WCDMA IV_RMC12.2K_Left Cheek_1513 DUT: EUT Communication System: WCDMA Band IV; Frequency: 1752.6 MHz;Duty Cycle: 1:1 Medium: H1750 Medium parameters used: f = 1753 MHz; σ = 1.32 mho/m; ε r = 39.7; ρ = 1000 kg/m 3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(5.36, 5.36, 5.36); Calibrated: 2022/4/6 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2022/3/24 - Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378 - Postprocessing SW: SEMCAD, V1.8 Build 186 Area Scan (71x81x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.020 mW/g Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 1.36 V/m; Power Drift = 0.053 dB Peak SAR (extrapolated) = 0.026 W/kg SAR(1 g) = 0.016 mW/g; SAR(10 g) = 0.010 mW/g Maximum value of SAR (measured) = 0.019 mW/g 0 dB = 0.019mW/g Test Laboratory: UnionTrust Date/Time: 2022/10/21 WCDMA V_RMC12.2K_Right Cheek_4233 DUT: EUT Communication System: WCDMA Band V; Frequency: 846.6 MHz;Duty Cycle: 1:1 Medium: H835 Medium parameters used: f = 847 MHz; σ = 0.925 mho/m; ε r = 39.4; ρ = 1000 kg/m 3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(6.12, 6.12, 6.12); Calibrated: 2022/4/6 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2022/3/24 - Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378 - Postprocessing SW: SEMCAD, V1.8 Build 186 Area Scan (71x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.302 mW/g Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 5.95 V/m; Power Drift = 0.123 dB Peak SAR (extrapolated) = 0.361 W/kg SAR(1 g) = 0.276 mW/g; SAR(10 g) = 0.204 mW/g Maximum value of SAR (measured) = 0.303 mW/g 0 dB = 0.303mW/g Test Laboratory: UnionTrust Date/Time: 2022/11/8 LTE 2_QPSK20M_1_50_Left Tilted_18700 DUT: EUT Communication System: LTE Band 2; Frequency: 1860 MHz;Duty Cycle: 1:1 Medium: H1900 Medium parameters used: f = 1860 MHz; σ = 1.43 mho/m; ε r = 39.5; ρ = 1000 kg/m 3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(5.08, 5.08, 5.08); Calibrated: 2022/4/6 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2022/3/24 - Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378 - Postprocessing SW: SEMCAD, V1.8 Build 186 Area Scan (71x81x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.161 mW/g Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 10.6 V/m; Power Drift = 0.008 dB Peak SAR (extrapolated) = 0.191 W/kg SAR(1 g) = 0.138 mW/g; SAR(10 g) = 0.105 mW/g Maximum value of SAR (measured) = 0.154 mW/g 0 dB = 0.154mW/g Test Laboratory: UnionTrust Date/Time: 2022/10/21 LTE 5_QPSK10M_1_25_Right Cheek_20600 DUT: EUT Communication System: LTE Band5; Frequency: 844 MHz;Duty Cycle: 1:1 Medium: H835 Medium parameters used: f = 844 MHz; σ = 0.924 mho/m; ε r = 39.4; ρ = 1000 kg/m 3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(6.12, 6.12, 6.12); Calibrated: 2022/4/6 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2022/3/24 - Phantom: …

Text truncated - open the document above for the full version.

Justification for Extended SAR Dipole Calibrations Dipole Date of Measurement Return Loss (dB) Delta (%) Impedance (ohm) Delta (ohm) Head 750MHz May 17, 2021 -26.1 -2.62 55.0 0.50 May 17, 2022 -25.4 55.5 Note: The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification results meet the requirement of extended calibration.

Report No.: 2210112024SAR-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com UTTR-SAR-IEEE Std 1528-2013-V1.0_Appendix D <Photographs of EUT> Refer to the EUT external photographs. <Antenna Location> Supported frequency bands State of receiver Antenna GSM WCDMA LTE Receiver OFF WWAN-Main (Ant. 0) GSM 850 Band V Band 5/ 12/ 17 WWAN-DIV (Ant. 1) PCS 1900 Band II / IV Band 2/ 4/ 7/ 66 Receiver ON WWAN-Main (Ant. 0) GSM 850, PCS 1900 Band II / IV / V Band 2/ 4/ 5/ 7/ 12/ 17/ 66 WWAN-DIV (Ant. 1) N/A N/A N/A The separation distance for antenna to edge: Antenna Overall Diagonal (mm) Display Diagonal (mm) To Left Side (mm) To Right Side (mm) To Top Side (mm) To Bottom Side (mm) WWAN-Main (Ant. 0) 177 167 0 44 0 156 WWAN-DIV (Ant. 1) 8 8 153 0 WLAN / BT 58 0 0 160 Report No.: 2210112024SAR-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com UTTR-SAR-IEEE Std 1528-2013-V1.0_Appendix D <Photographs of SAR Setup> Right Cheek Right Tilted Left Cheek Left Tilted Report No.: 2210112024SAR-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com UTTR-SAR-IEEE Std 1528-2013-V1.0_Appendix D Front Face of EUT with 1.0 cm Gap Rear Face of EUT with 1.0 cm Gap Left Side of EUT with 1.0 cm Gap Right Side of EUT with 1.0 cm Gap Top Side of EUT with 1.0 cm Gap Bottom Side of EUT with 1.0 cm Gap

Page 1 of 66 Report No.: 2210112024SAR-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-SAR-IEEE Std 1528-2013-V1.1 FCC SAR TEST REPORT Product Name: Smart Phone Trade Mark: BLU Model No.: G72 MAX Add. Model No.: N/A Report Number: 2210112024SAR-1 Test Standards: FCC 47 CFR Part 2 §2.1093 ANSI/IEEE C95.1-1992 IEEE Std 1528-2013 FCC ID: YHLBLUG72MX Test Result: PASS Date of Issue: November 15, 2022 Prepared f…

Text truncated - open the document above for the full version.