YHLBLUJ10LLSmart Phone

J10L Quick Guide | Guía Rápida | Guía Rápido | Guide Rapide o For instructions or any questions pertaining to phone usage, please click on the BLU page by visiting the following address: http://www.bluproducts.com o Para obtener instrucciones o preguntas relacionadas con el uso del teléfono, por favor haga clic en la página de BLU visitando la siguiente dirección: http://www.bluproducts.com o Para obter instruções ou perguntas relacionadas ao uso do telefone, por favor, clique na página da BLU visitando o seguinte endereço: http://www.bluproducts.com o Pour des instructions ou pour toutes questions sur l'utilisation du téléphone, veuillez cliquer sur à la page BLU en visitant l'adresse suivante: http://www.bluproducts.com ATTENTION ABOUT YOUR PHONE Transportation Safety Observe all transportation laws and regulations. PLEASE DRIVE RESPONSIBLY - DO NOT TEXT & DRIVE Hospital Safety Follow hospital rules and limitations and turn off your mobile phone when near medical instruments. Airport Safety Remember to follow all airport and flight safety regulations. Water Hazard Your phone is not waterproof. Keep your phone away from water or liquid to avoid damage. Emergency Calls Make sure your mobile phone is switched on and in a service area. On home screen, tap the phone key and dial the emergency number. Battery Usage For better performance and longer battery life, it is recommended that you charge the battery fully before using the mobile phone for the first time and that you initially complete two to three charge cycles. IMEI Information To check your IMEI, press *#06# KEY FUNCTIONS Volume Power On / Off Back Home Recent Apps Front Camera Camera Rear Camera Flash Fingerprint Sensor Power On / Off Used to power on/off the device and to lock the screen. » Long press the power button to power on » While powered on, long press the power off and the volume up key to power off Volume Adjusts the ringer volume, call volume, and multimedia volume. Home The home button pauses any current action and returns to the home screen. Recent Apps Opens a list of recently opened applications that allows you to switch conveniently between them. This option can also close any open applications by swiping to the side. Back Returns to the previous screen; Closes the keyboard, any open program, or any menu option. USB Port Charges the device and transfers data such as documents, music, and video between your device and a PC. Headset Port Connect earphones to this port for hands-free capabilities. You may also to listen to music or FM radio. Front Camera A high-resolution front camera to take pictures and video. This option is ideal for self-portraits. Rear Camera A high-resolution rear camera to take pictures and video. Flash Provides light for pictures in low-light conditions. It also may be used as a flashlight. Fingerprint Sensor Security measure that unlocks your device with the User’s fingerprints. Camera Button Launches the phones camera. INTRODUCTION Installation of the SIM Card Warning: Please keep the SIM card out of the reach of children. The SIM card and its contact are easily damaged due to scratching or bending. Please use caution when carrying, installing, or taking out the SIM card. Note: Please contact your cellular phone service provider directly to obtain your SIM card. To insert SIM card:  Remove the rear cover. Insert the SIM card.  Insert the SD card (For additional storage capacity)  Insert the battery, replace the rear cover and power on the phone. SIM Card Slot DEVICE CONFIGURATION When you initially power on your phone, there will be a series of steps to set up basic features. INSERT SIM Insert your SIM card so the phone can register to the network. SELECT LANGUAGE While on the Welcome screen, please scroll to select your language. In this step, you also have the option to adjust Vision Settings such as magnification, font, and display size. You have the ability to place an Emergency Call. CONNECT TO WI-FI This step allows the device to connect to the internet. Click on the desired Wi-Fi network that the device that will be connected. Please note that any unsecured Wi-Fi networks can be connected to without credentials and any secured Wi-Fi networks require a password for credentials prior to connection. It is recommended that you connect to a Wi-Fi network to check for software updates prior to startup to avoid any data overages. COPY APPS & DATA This step allows you to select transfer options such as applications, pictures, music and more from a previous device. You may also setup as new if you choose not to from a previous device. ADD YOUR ACCOUNT Sign in to your Google TM Account in order to keep accounts streamlined with Google services. Your account will be used for Google programs such as Google Play TM , Google Drive, and Google Pay. If you do not have a Google account, click to create a new account. If the device is not recognized by your Google account, you will have to complete a security verification. GOOGLE SERVICES Click to add Google services that include Backup and Restore, Location Services, Install Updates and Apps. SET FINGERPRINT SECURITY Setup your fingerprint to unlock your phone and for authorization on certain applications. There will be three options to setup fingerprint security: with PIN, Password or Pattern. In this step, you will have the ability to setup a PIN at startup as an extra layer of security. You also have the option of skipping the fingerprint setup and completing it at a later time. FINALIZE SETUP The last step allows you to setup Google Assistant and Google Pay. You may also add another email address, control what information is visible through the phones lock screen, and lets you also review any additional apps. You may skip this step and setup later. Google, Google Play, Google Maps, YouTube, Gmail, and other marks are trademarks of Google LLC. SOBRE SU TELÉFONO Seguridad de Transporte Siga todas las leyes y regulaciones de transporte. MANEJE RE…

Text truncated - open the document above for the full version.

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: BLU Products, Inc. FRN: 0019890946 Contact Name: Wei Zeng Address: 8600 NW 36th Street, Suite #200 Doral, FL 33166 Telephone No: 3057157171 Email: [email protected] Applicant: Company name: BLU Products, Inc. Product Description: Smart Phone Grantee code: YHL FCC ID: YHLBLUJ10LL Contact Name: Wei Zeng Address: 8600 NW 36th Street, Suite #200 Doral, FL 33166 Telephone No: 3057157171 Email: [email protected] [BLU Products, Inc.] certifies that, as of the date of this filing of the application with the TCB, [BLU Products, Inc.] is our designated US agent for service of process for the above referenced FCC ID. [BLU Products, Inc.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [BLU Products, Inc.] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 2023/04/28 Applicant’s Name: Wei Zeng US Agent’s Name: Wei Zeng Title: Senior Manager Title: Senior Manager Signature Signature

C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: BLU Products, Inc. Grantee code: YHL FCC ID: YHLBLUJ10LL Contact Name: Wei Zeng Address: 8600 NW 36th Street, Suite #200 Doral, FL 33166 Telephone No: 3057157171 Fax No: 3054368819 Email: [email protected] i. BLU Products, Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. BLU Products, Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. BLU Products, Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment . Date: 2023/04/28 Applicant’s Name: Wei Zeng Title: Senior Manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

C5266091_X8_Ed.1 1/1 BLU Products, Inc. 8600 NW 36th Street, Suite #200 Doral, FL 33166 Letter of Authorization Company: BLU Products, Inc. Address: 8600 NW 36th Street, Suite #200 Doral, FL 33166 Product Name: Smart Phone Model Number: J10L FCC Identifier: YHLBLUJ10LL We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Wei Zeng Date: Apr. 28, 2023 Title: Senior Manager Signature of applicant:

C5266091_X10_Ed.1 1/1 BLU Products, Inc. 8600 NW 36th Street, Suite #200 Doral, FL 33166 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: Apr. 28, 2023 Subject: Request for Confidentiality FCC ID: YHLBLUJ10LL To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality ID Label/Location No No Attestation Statement No No External Photos No Block Diagram Schematics Test Report No No Test Setup Photos No User’s Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) No No SDR Software / Security Info No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Name: Wei Zeng Date: Apr. 28, 2023 Title: Senior Manager Signature of applicant:

Page 1 of 6 FCC ID: YHLBLUJ10LL Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT EXTERNAL PHOTOS EUT Photo EUT Photo Page 2 of 6 FCC ID: YHLBLUJ10LL Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 3 of 6 FCC ID: YHLBLUJ10LL Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 4 of 6 FCC ID: YHLBLUJ10LL Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 5 of 6 FCC ID: YHLBLUJ10LL Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 6 of 6 FCC ID: YHLBLUJ10LL Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo

70*40mm Label location

Page 1 of 9 FCC ID: YHLBLUJ10LL Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT INTERNAL PHOTOS EUT Photo EUT Photo Page 2 of 9 FCC ID: YHLBLUJ10LL Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo WWAN Antenna (Div) WLAN/BT/GPS Antenna WWAN Antenna (Main) Page 3 of 9 FCC ID: YHLBLUJ10LL Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 4 of 9 FCC ID: YHLBLUJ10LL Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 5 of 9 FCC ID: YHLBLUJ10LL Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 6 of 9 FCC ID: YHLBLUJ10LL Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 7 of 9 FCC ID: YHLBLUJ10LL Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 8 of 9 FCC ID: YHLBLUJ10LL Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 9 of 9 FCC ID: YHLBLUJ10LL Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo

Page 1 of 63 Report No.: 2303224512SAR-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-SAR-IEEE Std 1528-2013-V1.1 FCC SAR TEST REPORT Product Name: Smart Phone Trade Mark: BLU Model No.: J10L Report Number: 2303224512SAR-1 Test Standards: FCC 47 CFR Part 2 §2.1093 ANSI/IEEE C95.1-1992 IEEE Std 1528-2013 FCC ID: YHLBLUJ10LL Test Result: PASS Date of Issue: May 18, 2023 Prepared for: BLU Products, Inc. 8600 NW 36th Street, Suite #200 Doral, FL 33166 Prepared by: Shenzhen UnionTrust Quality and Technology Co., Ltd. Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China TEL: +86-755-2823 0888 FAX: +86-755-2823 0886 Prepared by: Reviewed by: Curry Xue Henry Lu Test Engineer Team Leader Approved by: Date: May 18, 2023 Kevin Liang Assistant Manager Page 2 of 63 Report No.: 2303224512SAR-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-SAR-IEEE Std 1528-2013-V1.1 Version Version No. Date Description V1.0 May 18, 2023 Original Report Page 3 of 63 Report No.: 2303224512SAR-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-SAR-IEEE Std 1528-2013-V1.1 CONTENTS 1. GENERAL INFORMATION ....................................................................................................................................... 5 1.1. STATEMENT OF COMPLIANCE ................................................................................................................................. 5 1.2. CLIENT INFORMATION ............................................................................................................................................ 6 1.3. EUT INFORMATION ................................................................................................................................................ 6 1.3.1. GENERAL DESCRIPTION OF EUT .............................................................................................................. 6 1.3.2. DESCRIPTION OF ACCESSORIES ............................................................................................................... 6 1.3.3. EUT TX FREQUENCY BANDS .................................................................................................................... 7 1.3.4. WIRELESS TECHNOLOGIES....................................................................................................................... 8 1.4. MAXIMUM CONDUCTED POWER ............................................................................................................................. 9 1.5. OTHER INFORMATION .......................................................................................................................................... 10 1.6. TEST LOCATION .................................................................................................................................................. 10 1.7. TEST FACILITY .................................................................................................................................................... 10 1.8. GUIDANCE STANDARD ......................................................................................................................................... 11 2. SPECIFIC ABSORPTION RATE (SAR) ................................................................................................................. 12 2.1. INTRODUCTION .................................................................................................................................................... 12 2.2. SAR DEFINITION ................................................................................................................................................. 12 2.3. SAR LIMITS ........................................................................................................................................................ 12 3. SAR MEASUREMENT SYSTEM ............................................................................................................................ 13 3.1. SPEAG DASY SYSTEM ..................................................................................................................................... 13 3.1.1. ROBOT .................................................................................................................................................. 13 3.1.2. PROBE .................................................................................................................................................. 14 3.1.3. DATA ACQUISITION ELECTRONICS (DAE) ................................................................................................ 14 3.1.4. PHANTOM .............................................................................................................................................. 15 3.1.5. DEVICE HOLDER .................................................................................................................................... 16 3.1.6. SYSTEM VALIDATION DIPOLES ................................................................................................................ 16 3.2. SAR SCAN PROCEDURE ..................................................................................................................................... 17 3.2.1. SAR REFERENCE MEASUREMENT (DRIF…

Text truncated - open the document above for the full version.

Test Laboratory: UnionTrust Date/Time: 2023/4/14 System Check_H750_10dBm DUT: Dipole 750 MHz Communication System: CW; Frequency: 750 MHz;Duty Cycle: 1:1 Medium: H750 Medium parameters used: f = 750 MHz; σ = 0.883 mho/m; ε r = 41.2; ρ = 1000 kg/m 3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(6.42, 6.42, 6.42); Calibrated: 2023/3/15 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2023/3/8 - Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378 - Postprocessing SW: SEMCAD, V1.8 Build 186 System check/Area Scan (51x71x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.093 mW/g System check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 10.5 V/m; Power Drift = -0.013 dB Peak SAR (extrapolated) = 0.118 W/kg SAR(1 g) = 0.081 mW/g; SAR(10 g) = 0.055 mW/g Maximum value of SAR (measured) = 0.094 mW/g 0 dB = 0.094mW/g Test Laboratory: UnionTrust Date/Time: 2023/4/13 System Check_H835_10dBm DUT: Dipole 835 MHz Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: H835 Medium parameters used: f = 835 MHz; σ = 0.936 mho/m; ε r = 40.4; ρ = 1000 kg/m 3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(6.25, 6.25, 6.25); Calibrated: 2023/3/15 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2023/3/8 - Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378 - Postprocessing SW: SEMCAD, V1.8 Build 186 System check/Area Scan (51x81x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.110 mW/g System check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 11.2 V/m; Power Drift = -0.008 dB Peak SAR (extrapolated) = 0.140 W/kg SAR(1 g) = 0.095 mW/g; SAR(10 g) = 0.064 mW/g Maximum value of SAR (measured) = 0.111 mW/g 0 dB = 0.111mW/g Test Laboratory: UnionTrust Date/Time: 2023/4/11 System Check_H1750_10dBm DUT: Dipole 1750 MHz Communication System: CW; Frequency: 1750 MHz;Duty Cycle: 1:1 Medium: H1750 Medium parameters used: f = 1750 MHz; σ = 1.3 mho/m; ε r = 40.6; ρ = 1000 kg/m 3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(5.37, 5.37, 5.37); Calibrated: 2023/3/15 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2023/3/8 - Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378 - Postprocessing SW: SEMCAD, V1.8 Build 186 System check/Area Scan (51x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.443 mW/g System check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 17.5 V/m; Power Drift = 0.098 dB Peak SAR (extrapolated) = 0.607 W/kg SAR(1 g) = 0.346 mW/g; SAR(10 g) = 0.189 mW/g Maximum value of SAR (measured) = 0.426 mW/g 0 dB = 0.426mW/g Test Laboratory: UnionTrust Date/Time: 2023/4/16 System Check_H1900_10dBm DUT: Dipole 1900 MHz Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: H1900 Medium parameters used: f = 1900 MHz; σ = 1.45 mho/m; ε r = 40; ρ = 1000 kg/m 3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(5.11, 5.11, 5.11); Calibrated: 2023/3/15 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2023/3/8 - Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378 - Postprocessing SW: SEMCAD, V1.8 Build 186 System check/Area Scan (51x81x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.494 mW/g System check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 17.0 V/m; Power Drift = 0.170 dB Peak SAR (extrapolated) = 0.710 W/kg SAR(1 g) = 0.385 mW/g; SAR(10 g) = 0.201 mW/g Maximum value of SAR (measured) = 0.483 mW/g 0 dB = 0.483mW/g Test Laboratory: UnionTrust Date/Time: 2023/4/10 System Check_H2450_10dBm DUT: Dipole 2450 MHz Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: H2450 Medium parameters used: f = 2450 MHz; σ = 1.76 mho/m; ε r = 38.7; ρ = 1000 kg/m 3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(4.68, 4.68, 4.68); Calibrated: 2023/3/15 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2023/3/8 - Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378 - Postprocessing SW: SEMCAD, V1.8 Build 186 System check/Area Scan (61x81x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (interpolated) = 0.671 mW/g System check/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 19.7 V/m; Power Drift = -0.021 dB Peak SAR (extrapolated) = 0.980 W/kg SAR(1 g) = 0.496 mW/g; SAR(10 g) = 0.244 mW/g Maximum value of SAR (measured) = 0.640 mW/g 0 dB = 0.640mW/g Test Laboratory: UnionTrust Date/Time: 2023/4/8 System Check_H2600_10dBm DUT: Dipole 2600 MHz Communication System: CW; Frequency: 2600 MHz;Duty Cycle: 1:1 Medium: H2600 Medium parameters used: f = 2600 MHz; σ = 1.94 mho/m; ε r = 38.3; ρ = 1000 kg/m 3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(4.53, 4.53, 4.53); Calibrated: 2023/3/15 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2023/3/8 - Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378 - Postprocessing SW: SEMCAD, V1.8 Build 186 System check/Area Scan (61x81x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (interpolated) = 0.713 mW/g System check/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 19.1 V/m; Power Drift = -0.035 dB Peak SAR (extrapolated) = 1.08 W/kg SAR(1 g) = 0.525 mW/g; SAR(10 g) = 0.249 mW/g Maximum value of SAR (measured) = 0.681 mW/g 0 dB = 0.681mW/g

Test Laboratory: UnionTrust Date/Time: 2023/4/13 GSM850_GPRS10_Left Cheek_128 DUT: EUT Communication System: GPRS 850-2solt; Frequency: 824.2 MHz;Duty Cycle: 1:4 Medium: H835 Medium parameters used : f = 824.2 MHz; σ = 0.929 mho/m; ε r = 40.5; ρ = 1000 kg/m 3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(6.25, 6.25, 6.25); Calibrated: 2023/3/15 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2023/3/8 - Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378 - Postprocessing SW: SEMCAD, V1.8 Build 186 Area Scan (71x81x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.004 mW/g Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 0.000 V/m; Power Drift = 0.100 dB Peak SAR (extrapolated) = 0.005 W/kg SAR(1 g) = 0.00323 mW/g; SAR(10 g) = 0.00232 mW/g Maximum value of SAR (measured) = 0.004 mW/g 0 dB = 0.004mW/g Test Laboratory: UnionTrust Date/Time: 2023/4/16 GSM1900_GPRS11_Left Cheek_512 DUT: EUT Communication System: GPRS1900-3slots; Frequency: 1850.2 …

Text truncated - open the document above for the full version.