YHLBLUM10LPTablet with GSM, WCDMA, LTE, WiFi and Bluetooth

M10L PRO Quick Guide | Guía Rápida | Guía Rápido | Guide Rapide o For instructions or any questions pertaining to device usage, please click on the BLU page by visiting the following address: manuals.bluproducts.com o Para obtener instrucciones o preguntas relacionadas con el uso del dispositivo, por favor haga clic en la página de BLU visitando la siguiente dirección: manuals.bluproducts.com o Para obter instruções ou perguntas relacionadas ao uso do dispositivo por favor, clique na página de BLU visitando o seguinte endereço: manuals.bluproducts.com o Pour des instructions ou pour toutes questions sur l'utilisation de l’appareil, veuillez cliquer sur à la page BLU en visitant l'adresse suivante: manuals.bluproducts.com ATTENTION ABOUT YOUR DEVICE Transportation Safety Observe all transportation laws and regulations. PLEASE DRIVE RESPONSIBLY - DO NOT TEXT & DRIVE Hospital Safety Follow hospital rules and limitations and turn off your device when near medical instruments. Airport Safety Remember to follow all airport and flight safety regulations. Water Hazard Your device is not waterproof. Keep your device away from water or liquid to avoid damage. Emergency Calls Make sure your device is switched on and in a service area. On home screen, tap the phone key and dial the emergency number. Battery Usage For better performance and longer battery life, it is recommended that you charge the battery fully before using the device for the first time and that you initially complete two to three charge cycles. IMEI Information To check your IMEI, press *#06# KEY FUNCTIONS Volume Power On / Off Back Home Recent Apps Front Camera Rear Camera & Flash Power On / Off Used to power on/off the device and to lock the screen. » Long press the power button to power on » While the phone is powered on, press the power button and volume + simultaneously to access the power off menu. Volume Adjusts the ringer volume, call volume, and multimedia volume. Home The home button pauses any current action and returns to the home screen. Recent Apps Opens a list of recently opened applications that allows you to switch conveniently between them. This option can also close any open applications by swiping to the side. Back Returns to the previous screen; Closes the keyboard, any open program, or any menu option. USB Port Charges the device and transfers data such as documents, music, and video between your device and a PC. Headset Port Connect earphones to this port for hands-free capabilities. You may also to listen to music or FM radio. Front Camera A high-resolution front camera to take pictures and video. This option is ideal for self-portraits. Rear Camera A high-resolution rear camera to take pictures and video. Flash Provides light for pictures in low-light conditions. It also may be used as a flashlight. INTRODUCTION Installation of the SIM Card Warning: Please keep the SIM card out of the reach of children. The SIM card and its contact are easily damaged due to scratching or bending. Please use caution when carrying, installing, or taking out the SIM card. To insert SIM card:  Remove the SIM card cover. Insert the SIM card.  Insert the SD card (For additional storage capacity)  Replace the SIM card cover and power on the phone. SIM Card Slot DEVICE CONFIGURATION When you initially power on your device, there will be a series of steps to set up basic features. INSERT SIM Insert your SIM card so the device can register to the network. SELECT LANGUAGE While on the Welcome screen, please scroll to select your language. In this step, you also have the option to adjust Vision Settings such as magnification, font, and display size. You have the ability to place an Emergency Call. CONNECT TO WI-FI This step allows the device to connect to the internet. Click on the desired Wi-Fi network that the device that will be connected. Please note that any unsecured Wi-Fi networks can be connected to without credentials and any secured Wi-Fi networks require a password for credentials prior to connection. It is recommended that you connect to a Wi-Fi network to check for software updates prior to startup to avoid any data overages. COPY APPS & DATA This step allows you to select transfer options such as applications, pictures, music and more from a previous device. You may also setup as new if you choose not to from a previous device. ADD YOUR ACCOUNT Sign in to your Google TM Account in order to keep accounts streamlined with Google services. Your account will be used for Google programs such as Google Play TM , Google Drive, Google + and Google Pay. If you do not have a Google account, click to create a new account. If the device is not recognized by your Google account, you will have to complete a security verification. GOOGLE SERVICES Click to add Google services that include Backup and Restore, Location Services, Install Updates and Apps. DEVICE PROTECTION Click to setup device protection such as a PIN or Password. This option can be done at a later time. FINALIZE SETUP The last step allows you to setup another email address, control what information is visible through the devices lock screen, and lets you also review any additional apps. You may skip this step and setup later. Google, Google Play, Google Maps, YouTube, Gmail, and other marks are trademarks of Google LLC. SOBRE SU DISPOSITIVO Seguridad de Transporte Siga todas las leyes y regulaciones de transporte. MANEJE RESPONSABLEMENTE - NO USE MENSAJERIA DE TEXTO CUANDO CONDUCIENDO Seguridad de Hospitales Siga todas las leyes y regulaciones de hospital y apague su dispositivo cuando cerca de instrumentos médicos. Seguridad de Aeropuertos Por favor, siga todas las normas de seguridad de vuelo y de aeropuerto. Prueba de Agua El teléfono móvil no es impermeable. Manténgalo alejado de agua o líquidos para evitar daño. Llamadas de Emergencia SOS Asegúrese de que su dispositivo está encendido y en un área de servicio. En la pantalla de inicio, pulse la tecla del teléfono …

Text truncated - open the document above for the full version.

BLU Products, Inc. Certification Designating a U.S. Agent for Service of Process Date: 02-07-2023 Ref: Section 2.911(d)(7) filing FCC ID:YHLBLUM10LP To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA BLU Products, Inc.as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusionofany Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. U. S. Agent Information: Contact Person: Zeng Wei Company Name: BLU Products, Inc. Company Address: 8600 NW 36th Street, Suite #200 Doral, FL 33166, USA Email: [email protected] Sincerely yours, Applicant Company (grantee) Contact Person: Zeng Wei Company Name: BLU Products, Inc. Company Address: 8600 NW 36th Street, Suite #200 Doral, FL 33166, USA Email: [email protected]

BLU Products, Inc. PHOENIX TESTLAB GmbHDate: 2023-02-07 Product Certification Department Koenigswinkel 10 32825 Blomberg Germany Attestation Section2.911(d)(5)(ii) (KDB986446D01CoveredEquipment) BLUProducts,Inc.certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. BLU Products, Inc.certifies that, as of the date of the filing of the application, the applicantis notidentified on the Covered Listas an entity producing “covered” equipment. Type of Equipment subject to FCC Certification: FCCID:YHLBLUM10LP If you have any questions, please feel free to contact me Contact Person:Zeng Wei Position in the Company: Senior Manager Date of Signature:2023-02-07 ___________________________ Signatory (signature of the applicant)

BLUProducts,Inc. Date:2023/02/02 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern: The BLU Products, Inc., the undersigned, hereby authorizesMrs. Wendy Zhan fromShenzhen Morlab Communications Technology Co., Ltd., to act on the behalf of the BLU Products, Inc. solely in matters relating to the application for an FCC equipment authorization forFCC ID: YHLBLUM10LPincluding the signing of documents in connection with this Application. Necessary acts carriedout Shenzhen Morlab Communications Technology Co., Ltd.on our behalf of the BLU Products, Inc. in connection with the Application shall have the same effect as acts of the BLU Products, Inc.. BLU Products, Inc. also hereby certify that no party to this application is subject to a denial of benefits, including FCCbenefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Thank you for your attention to this matter. Yours Sincerely, Signatory: Contact name:Wei Zeng Title:Senior Manager Tel:3057157171 Email:[email protected] Company name: BLU Products, Inc.

BLUProducts,Inc. Date: 2023/02/02 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: Request of Confidentiality forFCC ID: YHLBLUM10LP To Whom it may concern: Pursuant to sections 0.457 and 0.459 of Commission’s Rules (CFR 47), and Section 552(b)(4) of the Freedom of Information Act,BLU Products, Inc.hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-TermConfidentiality for 180 days from grant date as outlined in Public Notice DA04-1705. This provision will giveBLU Products, Inc.temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listedas follows: PERMANENT AND SHORT-TERM CONFIDENTIAL LIST ExhibitDescription PERMANENT 1Block Diagram 2Operational Description 3Schematics 4BOM 5Tuneupprocedure SHORT-TERM 6External Photos 7Internal Photos 8Test-Setup Photos 9User Manual The Applicant understands that pursuantto Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Signatory： Contact name:Wei Zeng Title:Senior Manager Tel:3057157171 Email:[email protected] Company name: BLU Products, Inc.

BLU Products, Inc. UNII Declaration Letter We have declared below featured for FCC equipment authorization, device FCC ID:YHLBLUM10LP (1) DFS Device -- Master,Client with Radar detection capability , Client without radar detection capability,N/A (2) Active / Passive Scanning , adhoc mode access point capability Frequency Band (MHz) Active Scanning (the device can transmit a probe (beacon)) passive scanning (where the device is can listen only with no probes) Ad Hoc Mode capability Access point capability 2412 –2472 MHzYes,NoYes,NoYes,NoYes,No 2422 –2462 MHzYes,NoYes,NoYes,NoYes,No 5745 –5825 MHzYes,NoYes,NoYes,NoYes,No 5755 –5795 MHzYes,NoYes,NoYes,NoYes,No 5180 –5240 MHzYes,NoYes,NoYes,NoYes,No 5190 –5230 MHzYes,NoYes,NoYes,NoYes,No 5260 –5320 MHzYes,NoYes,NoYes,NoYes,No 5270 –5310 MHzYes,NoYes,NoYes,NoYes,No 5500 –5700 MHzYes,NoYes,NoYes,NoYes,No 5510 – 5670 MHz Yes,NoYes,NoYes,NoYes,No (3) Country code selection ability -Yes ,No If no, pls explain how was implemented : Country is selected as US by defaultand user can not change the country code. (4) Meet 15.202 requirement - Yes ,No , pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply ,No Apply, (If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) The device configuration can not be modified by user as program is not exposed to user by any means. Hardware does not allow USB connection for user which is must to change the configuration. If you have any questions, please feel free to contact me at the address shown below. Yours sincerely, Signatory Printed Name : Zeng Wei Position : Senior Manager

FCC ID: YHLBLUM10LP External Photos 1. EUT front view 2. EUT rear view 3. EUT left side view 4. EUT right side view 5. EUT top view 6. EUT bottom view 7. Accessories

Label： Location： BackView

FCC ID: YHLBLUM10LP Internal Photos 1. EUT uncover view 2. Antenna view 4G Main Antenna WIFI/GPS/BT Antenna Diversity Antenna

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ22120068S01 Annex C Plots of System Performance Check Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2023.01.06 System Check_750MHz_Head Communication System: UID 0, CW (0); Frequency: 750 MHz;Duty Cycle: 1:1 Medium: HSL_750 Medium parameters used: f = 750 MHz; σ = 0.924 S/m; ε r = 41.377; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.5 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(10.2, 10.2, 10.2) @ 750 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2022.12.30 - Phantom: ELI V8.0 (20deg probe tilt); Type: QD OVA 004 Ax; Serial: xxxx - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) CW750/Area Scan (81x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 3.17 W/kg CW750/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 53.64 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 3.61 W/kg SAR(1 g) = 2.25 W/kg; SAR(10 g) = 1.44 W/kg Maximum value of SAR (measured) = 3.05 W/kg 0 dB = 3.05 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2023.01.07 System Check_900MHz_Head Communication System: UID 0, CW (0); Frequency: 900 MHz;Duty Cycle: 1:1 Medium: HSL_900 Medium parameters used: f = 900 MHz; σ = 0.979 S/m; ε r = 40.893; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.5 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(9.81, 9.81, 9.81) @ 900 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2022.12.30 - Phantom: ELI V8.0 (20deg probe tilt); Type: QD OVA 004 Ax; Serial: xxxx - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) CW900/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 3.61 W/kg CW900/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 56.32 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 4.15 W/kg SAR(1 g) = 2.93 W/kg; SAR(10 g) = 1.95 W/kg Maximum value of SAR (measured) = 3.46 W/kg 0 dB = 3.46 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2023.01.08 System Check_1800MHz_Head Communication System: UID 0, CW (0); Frequency: 1800 MHz;Duty Cycle: 1:1 Medium: HSL_1800 Medium parameters used: f = 1800 MHz; σ = 1.437 S/m; ε r = 39.972; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.3 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(8.26, 8.26, 8.26) @ 1800 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2022.12.30 - Phantom: ELI V8.0 (20deg probe tilt); Type: QD OVA 004 Ax; Serial: xxxx - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) CW1800/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 12.8 W/kg CW1800/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 85.43 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 15.9 W/kg SAR(1 g) = 10.27 W/kg; SAR(10 g) = 5.33 W/kg Maximum value of SAR (measured) = 12.4 W/kg 0 dB = 12.4 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2023.01.09 System Check_2000MHz_Head Communication System: UID 0, CW (0); Frequency: 2000 MHz;Duty Cycle: 1:1 Medium: HSL_2000 Medium parameters used: f = 2000 MHz; σ = 1.461 S/m; ε r = 39.845; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.3 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(7.99, 7.99, 7.99) @ 2000 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2022.12.30 - Phantom: ELI V8.0 (20deg probe tilt); Type: QD OVA 004 Ax; Serial: xxxx - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) CW2000/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 15.1 W/kg CW2000/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 90.39 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 18.6 W/kg SAR(1 g) = 10.69 W/kg; SAR(10 g) = 5.46 W/kg Maximum value of SAR (measured) = 14.5 W/kg 0 dB = 14.5 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2023.01.10 System Check_2450MHz_Head Communication System: UID 0, CW (0); Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: HSL_2450 Medium parameters used: f = 2450 MHz; σ = 1.879 S/m; ε r = 38.942; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(7.42, 7.42, 7.42) @ 2450 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2022.12.30 - Phantom: ELI V8.0 (20deg probe tilt); Type: QD OVA 004 Ax; Serial: xxxx - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) CW2450/Area Scan (81x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 21.7 W/kg CW2450/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 81.84 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 28.3 W/kg SAR(1 g) = 13.74 W/kg; SAR(10 g) = 6.38 W/kg Maximum value of SAR (measured) = 21.5 W/kg 0 dB = 21.5 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2023.01.10 System Check_2600MHz_Head Communication System: UID 0, CW (0); Frequency: 2600 MHz;Duty Cycle: 1:1 Medium: HSL_2600 Medium parameters us…

Text truncated - open the document above for the full version.

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ22120068S01 Annex D Plots of Maximum SAR Test Results Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2023.01.07 GSM850_GPRS(2 TX slots)_Edge 2_0mm_Ch189 Communication System: UID 0, GSM850(class 10) (0); Frequency: 836.4 MHz;Duty Cycle: 1:4.15 Medium: HSL_900 Medium parameters used: f = 836.4 MHz; σ = 0.958 S/m; ε r = 40.843; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.5 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(9.81, 9.81, 9.81) @ 836.4 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2022.12.30 - Phantom: ELI V8.0 (20deg probe tilt); Type: QD OVA 004 Ax; Serial: xxxx - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Ch189/Area Scan (51x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.535 W/kg Ch189/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 20.57 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 0.621 W/kg SAR(1 g) = 0.436 W/kg; SAR(10 g) = 0.305 W/kg Maximum value of SAR (measured) = 0.535 W/kg 0 dB = 0.535 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2023.01.09 GSM1900_GPRS(3 TX slots)_Bottom Face_0mm_Ch661 Communication System: UID 0, GSM1900(class 11) (0); Frequency: 1880 MHz;Duty Cycle: 1:2.77 Medium: HSL_2000 Medium parameters used: f = 1880 MHz; σ = 1.321 S/m; ε r = 39.882; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.3 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(7.99, 7.99, 7.99) @ 1880 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2022.12.30 - Phantom: ELI V8.0 (20deg probe tilt); Type: QD OVA 004 Ax; Serial: xxxx - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Ch661/Area Scan (81x121x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.950 W/kg Ch661/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 0.4550 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 1.32 W/kg SAR(1 g) = 0.604 W/kg; SAR(10 g) = 0.278 W/kg Maximum value of SAR (measured) = 0.999 W/kg 0 dB = 0.999 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2023.01.09 WCDMA Band II_RMC 12.2Kbps_Bottom Face_0mm_Ch9400 Communication System: UID 0, UMTS-FDD (0); Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: HSL_2000 Medium parameters used: f = 1880 MHz; σ = 1.321 S/m; ε r = 39.882; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.3 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(7.99, 7.99, 7.99) @ 1880 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2022.12.30 - Phantom: ELI V8.0 (20deg probe tilt); Type: QD OVA 004 Ax; Serial: xxxx - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Ch9400/Area Scan (81x121x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.09 W/kg Ch9400/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 0 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 1.46 W/kg SAR(1 g) = 0.660 W/kg; SAR(10 g) = 0.299 W/kg Maximum value of SAR (measured) = 1.10 W/kg 0 dB = 1.10 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2023.01.08 WCDMA Band IV_RMC 12.2Kbps_Bottom Face_0mm_Ch1413 Communication System: UID 0, UMTS-FDD (0); Frequency: 1732.6 MHz;Duty Cycle: 1:1 Medium: HSL_1800 Medium parameters used: f = 1733 MHz; σ = 1.366 S/m; ε r = 41.367; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.3 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(8.26, 8.26, 8.26) @ 1732.6 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2022.12.30 - Phantom: ELI V8.0 (20deg probe tilt); Type: QD OVA 004 Ax; Serial: xxxx - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Ch1413/Area Scan (81x121x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.09 W/kg Ch1413/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 0 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 1.51 W/kg SAR(1 g) = 0.685 W/kg; SAR(10 g) = 0.321 W/kg Maximum value of SAR (measured) = 1.14 W/kg 0 dB = 1.14 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2023.01.07 WCDMA Band V_RMC 12.2Kbps_Edge 1_0mm_Ch4182 Communication System: UID 0, UMTS-FDD (0); Frequency: 836.4 MHz;Duty Cycle: 1:1 Medium: HSL_900 Medium parameters used: f = 836.4 MHz; σ = 0.958 S/m; ε r = 40.843; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.5 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(9.81, 9.81, 9.81) @ 836.4 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2022.12.30 - Phantom: ELI V8.0 (20deg probe tilt); Type: QD OVA 004 Ax; Serial: xxxx - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Ch4182/Area Scan (51x121x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.35 W/kg Ch4182/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 0 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 2.12 W/kg SAR(1 g) = 0.756 W/kg; SAR(10 g) = 0.431 W/kg Maximum value of SAR (measured) = 1.46 W/kg 0 dB = 1.46 W/kg Test Laboratory: Shenzhen Morlab Communicatio…

Text truncated - open the document above for the full version.

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ22120068S01 Annex E Conducted Power 128189251128189251 824.2836.4848.8824.2836.4848.8 32.0732.2132.1633.0023.0723.2123.1624.00 32.0832.2232.1533.0023.0823.2223.1524.00 30.1230.1530.1131.0024.1224.1524.1125.000.04 28.1128.1228.2229.0023.8523.8623.9624.740.11 25.5225.6025.5426.5022.5222.6022.5423.500.08 25.2625.3325.2826.0016.2616.3316.2817.000.07 24.3924.5424.5125.5018.3918.5418.5119.500.15 23.3723.4223.3624.0019.1119.1619.1019.740.06 20.5120.6120.5421.5017.5117.6117.5418.500.10 Max.32.22Max.24.15 512661810512661810 1850.218801909.81850.218801909.8 29.1129.2129.0830.0020.1120.2120.0821.00 29.1229.2029.0930.0020.1220.2020.0921.00 26.6926.7726.6827.5020.6920.7720.6821.500.09 25.1525.2125.1826.0020.8920.9520.9221.740.06 23.1723.2123.1924.0020.1720.2120.1921.000.04 25.3825.4225.3126.0016.3816.4216.3117.000.11 24.3624.4124.3125.0018.3618.4118.3119.000.10 22.2822.3622.3223.0018.0218.1018.0618.740.08 20.2620.3520.2921.0017.2617.3517.2918.000.09 Max.29.21Max.20.95 926294009538131214131513413241824233 966298009938153716381738435744074458 1852.418801907.61712.41732.61752.6826.4836.4846.6 3GPP Rel 99RMC 12.2Kbps22.1422.1822.1723.0022.1822.2122.1523.0022.2822.3022.2623.00 3GPP Rel 6HSDPA Subtest-121.4321.4821.5622.5021.7721.3121.5522.5021.4021.5221.1722.50 3GPP Rel 6HSDPA Subtest-221.1121.1621.2122.5021.7321.3321.5122.5021.1621.2521.1022.50 3GPP Rel 6HSDPA Subtest-321.3221.3621.3722.5021.6921.3221.4822.5021.1121.1521.1122.50 3GPP Rel 6HSDPA Subtest-421.1021.0221.0522.5021.7221.3621.5122.5021.2021.1421.1022.50 3GPP Rel 6HSUPA Subtest-121.4221.4621.4922.5021.7421.2821.5122.5021.3621.2021.1322.50 3GPP Rel 6HSUPA Subtest-221.3821.4321.4922.5021.7321.2421.4522.5021.3621.3521.5522.50 3GPP Rel 6HSUPA Subtest-321.4021.4421.4422.5021.6921.2921.5122.5021.2721.3021.5622.50 3GPP Rel 6HSUPA Subtest-421.3721.4321.4822.5021.7321.2421.4722.5021.3621.2621.5222.50 3GPP Rel 6HSUPA Subtest-521.4021.4421.4622.5021.7021.3221.5322.5021.3021.1021.5622.50 3GPP Rel 7 HSPA+ (16QAM) Subtest-121.4221.3721.3522.5021.6621.2621.5422.5021.1721.1021.5222.50 Cable Loss0.8Cable Loss0.8Cable Loss0.6 Max.22.18Max.22.21Max.22.30 GSM850Burst Average Power (dBm)Frame-Average Power (dBm) TX Channel Full Power Frequency (MHz) GSM 1 Tx slot GPRS 1 Tx slot GPRS 2 Tx slots Tune-up Limit (dBm) Tune-up Limit (dBm) Ch Delta > 0.5 0.15 GPRS 3 Tx slots GPRS 4 Tx slots EDGE 1 Tx slot EDGE 2 Tx slots EDGE 3 Tx slots EDGE 4 Tx slots GPRS 1 Tx slot Tune-up Limit (dBm) Ch Delta > 0.5 0.13 Mode AttenuatorCable Loss : 0.6 Burst Average Power (dBm)Frame-Average Power (dBm) EDGE 2 Tx slots EDGE 3 Tx slots GPRS 2 Tx slots GPRS 3 Tx slots GPRS 4 Tx slots Mode AttenuatorCable Loss : 0.8 BandWCDMA Band II (dBm)WCDMA Band IV (dBm)WCDMA Band V (dBm) TX Channel Rx Channel Frequency (MHz) Tune-up Limit (dBm) Tune-up Limit (dBm) Tune-up Limit (dBm) Mode Attenuator EDGE 4 Tx slots EDGE 1 Tx slot GSM1900 TX Channel Frequency (MHz) GSM 1 Tx slot Tune-up Limit (dBm) BW [MHz] Modulation RB Size RB Offset Low Channel Middle Channel High Channel BW [MHz] Modulation RB Size RB Offset Low Channel Middle Channel High Channel 187001890019100200502017520300 18601880190017201732.51745 20QPSK10 22.5722.6022.5420QPSK1022.5622.6422.63 20QPSK149 22.5522.4922.4220QPSK14922.4222.5022.49 20QPSK199 22.4922.4522.4320QPSK19922.3422.4722.59 20QPSK500 21.6521.7421.6720QPSK50021.7221.7621.73 20QPSK5024 21.6621.7121.7120QPSK502421.6321.7121.71 20QPSK5050 21.7121.6721.7320QPSK505021.5221.6321.64 20QPSK1000 21.6421.7321.6920QPSK100021.6221.6621.73 2016QAM10 21.7021.7021.722016QAM1021.4921.7921.66 2016QAM149 21.5421.8421.802016QAM14921.6421.4121.55 2016QAM199 21.7921.6422.042016QAM19921.4321.6521.49 2016QAM500 21.7221.6921.672016QAM50021.6221.5521.69 2016QAM5024 21.6821.7321.742016QAM502421.8821.9921.88 2016QAM5050 21.7621.7321.802016QAM505021.8421.8521.85 2016QAM1000 21.7921.8021.672016QAM100021.8621.9421.95 2064QAM10 20.7420.9320.672064QAM1020.6020.7120.93 2064QAM149 20.6920.8720.782064QAM14920.6420.5720.45 2064QAM199 20.6420.9720.972064QAM19920.9120.4820.95 2064QAM500 20.7420.6620.712064QAM50020.6120.7020.65 2064QAM5024 20.7720.7…

Text truncated - open the document above for the full version.