YHLBLUX22Smart Phone

BLU Products, Inc.

Click to zoom

Application Details

Equipment Class: DXX - Part 15 Low Power Communication Device Transmitter
Date of Grant: Feb 14, 2023
Application Purpose: Original Equipment
Date of Application: Feb 14, 2023
Equipment Note: Smart Phone
Frequency Range: 13.56000000 - 13.56000000
Company: BLU Products, Inc.
Country: United States

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

Federal Communication Commission Interference Statement FCC ID: YHLBLUX22 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Radiation Exposure Statement: This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating positions (10mm) accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands.

Users Manual

1 X22 POS USER MANUAL 2 3 Table of Contents Safety Information ............................................................ 6 Appearance and Key Function ...................................... 8 Introduction ...................................................................... 11 Call Functions ................................................................. 12 Notifications Bar ............................................................. 14 Contacts ............................................................................ 16 Messaging ........................................................................ 20 Bluetooth & Wi-Fi ............................................................ 23 4 Gmail .................................................................................. 26 Play Store ......................................................................... 29 Camera .............................................................................. 31 Music .................................................................................. 33 FM Radio ........................................................................... 35 Sound Recorder .............................................................. 39 File ...................................................................................... 39 Calendar ............................................................................ 41 Alarm Clock ...................................................................... 42 5 Storage .............................................................................. 45 Troubleshooting .............................................................. 46 Safety Information Please carefully read the terms below: Use Safely Do not use the phone in situations where it might cause danger. Transportation Safety Please observe all transportation laws and regulations. 6 Please drive with both hands on the wheel. PLEASE DRIVE RESPONSIBLY - DO NOT TEXT AND DRIVE Hospital Safety Please follow hospital rules and limitations. Please turn off your mobile phone when near medical instruments. Airport Safety Remember to follow all airport and flight safety regulations. Please do not use your phone during flight. Chemical Warning Do not use your mobile phone around fuels or chemicals. Temperature Warning Do not subject your phone to extreme temperature conditions. Water Hazard Your phone is not waterproof. Keep your phone away from water or liquid to avoid damage. Emergency Calls Make sure your mobile phone is switched on and in a service area. In home screen, tap the phone key and dial the emergency number. 7 Accessories and Batteries Use only Blu authorized batteries and accessories. Information Backup Remember to keep a written record of all important information. Battery Safety and Precautions - For better performance and longer battery life, it is recommended that you charge the battery fully before using the mobile phone for the first time. - The optimum performance of a new battery is typically achieved after two or three complete charge cycles. Note: Keep in mind that continuous overcharging will affect long term battery life. - While charging, keep the mobile phone out the reach of children. - Store the battery in a cool and dry place away from direct sunlight and water. - Do not expose batteries to extreme temperatures (below -8°C (18°F) or above 43°C (110°F). - Immediately stop using the battery if it produces an odor, cracks and leaks, overheats, distorts or has any other type of physical damage. - Avoid using the charger near or around liquids. If the charger comes in contact with water or any liquids, immediately unplug it from the outlet to reduce the risk of overheating, charger malfunction, electric shock or fire. Warning: Please be careful with the disposal of used batteries. Do not throw away batteries with daily 8 waste. Please follow local environmental laws and guidelines for proper waste disposal. Cleaning and Maintenance - Avoid using the handset and accessories in excessively moist areas to avoid malfunction. - Use a soft, dry cloth to clean the handset, battery and charger. - Do not use alcohol, thinner, benzene or any other solvent to clean the handset. Appearance and Key Function 9 Volume Power On Back Home Menu Front Camera Camera 10 Flash Rear Camera Fingerprint 11 Introduction Installation of the SIM Card Warning: Please keep the SIM card out of the reach of children. The SIM card and its contact are easily damaged due to scratching or bending. Please use caution when carrying, installing or taking out the SIM card. NB: Please contact your cellular phone service provider directly to obtain your SIM card. To insert SIM card: 1. Remove the card slot. Insert the SIM card. 2. Insert the SD card. (For additional storage capacity) 3.Insert card slot, and power on phone. 12 Power On and Off On - Please ensure the SIM card has been properly inserted into the phone. Long press the Power key to switch the phone on. Off - In standby mode, Press power+ up volume key will popup power off option. Select Power Off in the menu and confirm in the pop-up prompt to switch off the phone. Or pull down the notification twice, there is a power button, click and select power off to shutdown Security You may set a security lock feature as a security measure for the phone. For further information regarding password locks, password revision and other functions please enter into the security option in settings. Call Functions Enter the dialer application and then click the dial key. If dialing an extension, you may click the dial pad icon in the bottom of the screen to open the interface and enter the number of the extension. You may also press and hold the 0 key to add a (+) sign when adding an international dialing prefix. 13 Call Log History 14 Call Logs Every telephone number called and received will be saved in the Recent in dialer. All numbers in the call log can be dialed directly by clicking th…

Text truncated - open the document above for the full version.

Attestation Statements

C5266091_X23_Ed.1 1/1 US AGENT LETTER OF ATTESTATION US Agent: Company Name: BLU Products, Inc. Contact Name: Wei Zeng Address: 8600 NW 36th Street, Suite #200 Doral, FL 33166 Telephone No: 3057157171 Fax No: 3054368819 Email: [email protected] TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 This letter is to confirm that we have accepted the responsibility to act as US agent representative on behalf of the (BLU Products, Inc.) noted below for all future FCC certification/registrations obtained during the period of this agreement, which ends at the specified date below. As per US agent, we are aware of the requirements involved as outlined in FCC Equipment Authorization Program in their Report and Order FCC 22-84 and the clause § 2.911 Application requirements. Applicant Company name: BLU Products, Inc. Grantee code: YHL FCC ID: YHLBLUX22 Contact Name: Wei Zeng Address: 8600 NW 36th Street, Suite #200 Doral, FL 33166 Telephone No: 3057157171 Fax No: 3054368819 Email: [email protected] The Applicant acknowledge the acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Date: 2023/2/8 Applicant’s Name: BLU Products, Inc. US Agent’s Name: BLU Products, Inc. Title: Senior Manager Title: Senior Manager Signature Signature

Attestation Statements

C5266091_X24_Ed.1 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: BLU Products, Inc. Grantee code: YHL FCC ID: YHLBLUX22 Contact Name: Wei Zeng Address: 8600 NW 36th Street, Suite #200 Doral, FL 33166 Telephone No: 3057157171 Fax No: 3054368819 Email: [email protected] i. [BLU Products, Inc.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [BLU Products, Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. Date: 2023/2/8 Applicant’s Name: BLU Products, Inc. Title: Senior Manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

Cover Letter(s)

C5266091_X8_Ed.1 1/1 BLU Products, Inc. 8600 NW 36th Street, Suite #200 Doral, FL 33166 Letter of Authorization Company: BLU Products, Inc. Address: 8600 NW 36th Street, Suite #200 Doral, FL 33166 Product Name: Smart Phone Model Number: X22 POS FCC Identifier: YHLBLUX22 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Wei Zeng Date: Jan. 31, 2023 Title: Senior Manager Signature of applicant:

Cover Letter(s)

C5266091_X10_Ed.1 1/1 BLU Products, Inc. 8600 NW 36th Street, Suite #200 Doral, FL 33166 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: Jan. 31, 2022 Subject: Request for Confidentiality FCC ID: YHLBLUX22 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality ID Label/Location No No Attestation Statement No No External Photos No Block Diagram Schematics Test Report No No Test Setup Photos No User’s Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) No No SDR Software / Security Info No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Name: Wei Zeng Date: Jan. 31, 2023 Title: Senior Manager Signature of applicant:

External Photos

Page 1 of 5 FCC ID: YHLBLUX22 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT EXTERNAL PHOTOS EUT Photo EUT Photo Page 2 of 5 FCC ID: YHLBLUX22 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 3 of 5 FCC ID: YHLBLUX22 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 4 of 5 FCC ID: YHLBLUX22 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 5 of 5 FCC ID: YHLBLUX22 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo

Internal Photos

Page 1 of 9 FCC ID: YHLBLUX22 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT INTERNAL PHOTOS EUT Photo EUT Photo WLAN/BT/GPS Antenna WWAN Antenna (TX Bands: < 1GHz Bands) WWAN Antenna (TX Bands: >1GHz Bands) NFC Antenna Page 2 of 9 FCC ID: YHLBLUX22 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 3 of 9 FCC ID: YHLBLUX22 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 4 of 9 FCC ID: YHLBLUX22 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 5 of 9 FCC ID: YHLBLUX22 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 6 of 9 FCC ID: YHLBLUX22 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 7 of 9 FCC ID: YHLBLUX22 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 8 of 9 FCC ID: YHLBLUX22 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 9 of 9 FCC ID: YHLBLUX22 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo

RF Exposure Info

NFC Exposure Requirements Product Description: Smart Phone Model No.: X22 POS FCC ID: YHLBLUX22 According to the KDB 447498 D01 V06, clause 4.3, the following RF exposure evaluation shall to demonstrate RF exposure compliance. Tx frequency: 13.56 MHz Type of Modulation: ASK Antenna Type: Fixed internal Antenna Nominal rated field strength: 53.54 dBμV/m at 3 meter Based on the Maximum allowed field strength was 53.54 dBμV/m at 3m in frequency 13.56MHz, thus; The EIRP = [(FS*D) ^2*1000 / 30] = 0.00007mW Thus; Conducted power = Radiated Power (EIRP) – Antenna Gain So; Conducted Power = 0.00007mW. The SAR Exclusion Threshold Level for 13.56MHz when the minimum test separation distance is < 50mm: = [474 * (1 + log100/f(MHz))]/2 = 443mW Since the source-based time-averaging conducted output power is well below the SAR low threshold level, so the EUT is considered to comply with SAR requirement without testing.

Test Report

天线规格书 1. Antenna position All of Implementation antenna Main antenna(Antenna Label:A): LTE FDD B5/B12/B17/B28A/B28B/ RX&TX , WCDMA B5/B8 RX&TX GSM B5/B8 RX&TX DIV antenna(Antenna Label:B): LTE FDD B1/B2/B3/B4/B7/B66 RX&TX WCDMA B1/B2/B4 RX&TX GSM B2/B3 RX&TX GPS/WiFi/BT 2.4G 2412MHz~2472MHz& GPS: 1570 MHz~1620 MHz WiFi 5G 5100MHz~5800MHz 2. Antenna Max. Peak Gain: EGSM900:-0.98dBi GSM850: -0.91dBi DCS1800: -0.65dBi MAIN ANT DIV ANT WIFI/BT/GPS PCS1900: -0.59dBi WCDMA-B1: -0.31dBi WCDMA-B2: -0.40dBi WCDMA-B4: -0.63dBi WCDMA-B5: -0.91dBi WCDMA-B8: -0.98dBi LTE -B1: -0.31dBi LTE-B2: -0.40dBi LTE-B3: -0.65dBi LTE-B4: -0.63dBi LTE-B5: -0.91dBi LTE -B7: -0.69dBi LTE-B12: -0.93dBi LTE-B17: -0.98dBi LTE-B28: -0.93dBi LTE-B66: -0.71dBi 2.4G-WIFI/BT: -0.53dBi 5G -WIFI: -0.86dBi GPS: -1.1dBi 3. 2D,3D picture unit (dBi) 2400MHZ~2500MHZ(BT/WIFI 2.4G) Worst case frequency 2440MHz 1.00dB 0.00dB 1.00dB 2.00dB 3.00dB 4.00dB 5.00dB 6.00dB 7.00dB 8.00dB 9.00dB 270deg 90deg 0deg 180deg 5100MHZ~5800MHZ(WIFI 5G) Worst case frequency 5500MHz Dimensional drawing of main antenna Dimensional drawing of GPS/WIFI/BT antenna Dimensional drawing of diversity antenna Dimensional drawing of NFC antenna

Test Report

Page 1 of 28 Report No.: 2212233383RFC-5 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-FCCPART15.225-V1.1 FCC TEST REPORT Product Name: Smart Phone Trade Mark: BLU Model No.: X22 POS Report Number: 2212233383RFC-5 Test Standards: FCC 47 CFR Part 15 Subpart C FCC ID: YHLBLUX22 Test Result: PASS Date of Issue: February 9, 2023 Prepared for: BLU Products, Inc. 8600 NW 36th Street, Suite #200 Doral, FL 33166 Prepared by: Shenzhen UnionTrust Quality and Technology Co., Ltd. Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China TEL: +86-755-2823 0888 FAX: +86-755-2823 0886 Prepared by: Reviewed by: Kieron Luo Henry Lu Project Engineer Team Leader Approved by: Date: February 9, 2023 Kevin Liang Assistant Manager Page 2 of 28 Report No.: 2212233383RFC-5 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-FCCPART15.225-V1.1 Version Version No. Date Description V1.0 February 9, 2023 Original Page 3 of 28 Report No.: 2212233383RFC-5 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-FCCPART15.225-V1.1 CONTENTS 1. GENERAL INFORMATION ....................................................................................................................................... 4 1.1 CLIENT INFORMATION ........................................................................................................................................ 4 1.2 EUT INFORMATION ............................................................................................................................................ 4 1.2.1 GENERAL DESCRIPTION OF EUT ............................................................................................................ 4 1.2.2 DESCRIPTION OF ACCESSORIES .............................................................................................................. 5 1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD ................................................................................. 5 1.4 OTHER INFORMATION ......................................................................................................................................... 5 1.5 DESCRIPTION OF SUPPORT UNITS ...................................................................................................................... 5 1.6 TEST LOCATION ................................................................................................................................................. 6 1.7 TEST FACILITY ................................................................................................................................................... 6 1.8 DEVIATION FROM STANDARDS ............................................................................................................................ 6 1.9 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................. 6 1.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................................ 6 1.11 MEASUREMENT UNCERTAINTY ........................................................................................................................... 7 2. TEST SUMMARY ...................................................................................................................................................... 8 3. EQUIPMENT LIST .................................................................................................................................................... 9 4. TEST CONFIGURATION ........................................................................................................................................ 10 4.1 ENVIRONMENTAL CONDITIONS FOR TESTING ...................................................................................................... 10 4.1.1 NORMAL OR EXTREME TEST CONDITIONS ............................................................................................. 10 4.1.2 RECORD OF NORMAL ENVIRONMENT AND TEST SAMPLE ........................................................................ 10 4.2 TEST CHANNELS ............................................................................................................................................. 10 4.3 EUT TEST STATUS .......................................................................................................................................... 10 4.4 PRE-SCAN .................................................................................................................................................... 11 4.4.1 USED FOR TESTING OF WORST-CASE DATA RATES .................................................................................. 11 4.5 TEST SETUP .................................................................................................................................................... 12 4.5.1 FOR RADIATED EMISSIONS TEST SETUP ................................................................................................ 12 4.5.2 FOR CONDUCTED EMISSIONS TEST SETUP ............................................................................................ 13 4.5.3 FOR CONDUCTED RF TEST SETUP ................................................................…

Text truncated - open the document above for the full version.

Test Setup Photos

Page 1 of 3 FCC ID: YHLBLUX22 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and Technology Park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com APPENDIX 1 PHOTOS OF TEST SETUP Radiated emission Test Setup (Below 30 MHz) Radiated emission Test Setup (30 MHz~1 GHz) Page 2 of 3 FCC ID: YHLBLUX22 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and Technology Park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com Radiated emission Test Setup (Above 1 GHz) Conducted Emission Test Setup Page 3 of 3 FCC ID: YHLBLUX22 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and Technology Park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com RF Conducted Test Setup