YI4DW23PXMicrowave Oven

Features, Benefits And Specification Zhongshan Donlim Weili Electrical Appliances Co., Ltd. ADDRESS: Fusha Industrial Park, Fusha Town, Zhongshan City, Guangdong Province 23PX09 /23PX10/ 23PX11 23PX27/ 23PX39 /23PX98 WEILI 15 Door (bent) door close properly and that there is no Do not attempt to operate this with the safety interlocks. oven with the door open since open-door operation can result in harmful exposure to microwave energy. It is important not to defeat or tamper Do not place any object between the oven front face and the door or allow soil or cleaner residue to accumulate on sealing surfaces. Do not operate the oven if it is damaged. It is particularly important that the oven damage to the: Hinges and latches (broken or loosened) Door seals and sealing surfaces The oven should not be adjusted or repaired by anyone except properly qualified service personnel. 0.9 Power Source............................120V~60Hz Power Consumption...................1400W Maximum Output.......................900W Oven Capacity...........................0.9 cu.ft. Specification instruction maunal current Touch START/PAUSE pad to start. s. Touching this button repeatedly with add 30 seconds each time. 100P 90P 80P 70P 60P 50P 40P 30P 20P 10P 3) Touch START/PAUSE pad. 3.Touch START/PAUSE pad. 3.Touch START/PAUSE pad. 3.Touch START/PAUSE pad. 2.Touch START/PAUSE pad. 2.Touch the pad once for one slice and touch the pad twice for two slices. 3.Touch START/PAUSE pad. 2.Touch START/PAUSE pad. professional person 3

Parts List---(Long term)

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS EUT – Front View EUT – Open View EUT – Rear View EUT – Top View EUT – Bottom View EUT – Left Side View EUT – Right Side View

EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information Specifications : Text is Black or white in color and is left justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Label here

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS EUT – Cover off View EUT – Main Board Top View EUT – Main Board Bottom View EUT – LED View EUT – Fans View EUT – Magnetron Top View EUT – Magnetron Bottom View EUT – Magnetron Label View EUT – High Voltage Capacitor Top View EUT –High Voltage Capacitor Bottom View EUT – High Voltage Capacitor Label View EUT –Control Panel Covered off View EUT –Control Panel Board Top View EUT –Control Panel Board Bottom View EUT –Transformer Top View EUT –Transformer Bottom View EUT –Transformer Label View EUT – Fans View EUT –Diode View EUT – Motor View EUT – Motor Label View

Note: This test report is prepared for the customer shown above and for the equipment described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. FCC PART 18 TEST REPORT For Zhongshan Donlim Weili Electrical Appliances Co., Ltd Fusha Industrial Park, Fusha Town, Zhongshan City, Guangdong Province, P. R. China FCC ID: YI4DW23PX Report Type: Original Report Product Type: Microwave oven Test Engineer: Hill He Report Number: RSZ150120552-00 Report Date: 2015-02-05 Reviewed By: Sunny Sun EMC Leader Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F, the 3rd Phase of WanLi Industrial Building, ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ150120552-00 FCC Part 18 Page 2 of 20 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 3 OBJECTIVE ................................................................................................................................................................... 3 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 3 TEST METHODOLOGY .................................................................................................................................................. 3 TEST FACILITY ............................................................................................................................................................. 3 OPERATING CONDITION/TEST CONFIGURATION .......................................................................................... 4 JUSTIFICATION ............................................................................................................................................................. 4 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 4 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 4 EXTERNAL CABLE LIST AND DETAILS ......................................................................................................................... 4 CONFIGURATION OF TEST SETUP ................................................................................................................................. 4 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 5 CONDUCTED EMISSIONS ........................................................................................................................................ 6 APPLICABLE STANDARD .............................................................................................................................................. 6 MEASUREMENT UNCERTAINTY .................................................................................................................................... 6 EUT SETUP .................................................................................................................................................................. 6 EMI TEST RECEIVER SETUP ......................................................................................................................................... 7 TEST PROCEDURE ........................................................................................................................................................ 7 TEST EQUIPMENT LIST AND DETAILS ........................................................................................................................... 7 TEST RESULTS SUMMARY ............................................................................................................................................ 7 TEST DATA .................................................................................................................................................................. 8 RADIATION HAZARD MEASUREMENT ............................................................................................................. 11 APPLICABLE STANDARD ............................................................................................................................................ 11 ENVIRONMENTAL CONDITIONS .................................................................................................................................. 11 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 11 RADIATION HAZARD MEASUREMENT ........................................................................................................................ 11 INPUT POWER ............................................................................................................................................................. 12 LOAD FOR MICROWAVE OVENS.................................................................................................................................. 12 RF OUTPUT POWER MEASUREMENT .......................................................................................................................... 12 OPERATING FREQUENCY MEASUREMENT .................................................................................................................. 14 RADIATED EMISSIONS ..................................................................................…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Conducted Emissions - Front View Conducted Emissions - Side View Radiated Emissions - Front View (Below 1 GHz) Radiated Emissions - Rear View (Below 1 GHz) Radiated Emissions - Front View (Above 1 GHz) Radiated Emissions - Rear View (Above 1 GHz)