YIY-PROD1185Personal Digital Assistant

I PROD1185 Personal Digital Assistant User's Manual Version 1.0 2019.8 - II - This page is intentionally left blank. - i - Revision History Version Release Time Description 1.0 July 2020 Initial release - ii - Copyright Copyright © 2020 Industrea Mining Technology. All Rights Reserved. This document contains proprietary information protected by copyright. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer. Disclaimer The information in this document is subject to change without prior notice in order to improve the reliability, design and function. It does not represent a commitment on the part of the manufacturer. Under no circumstances will the manufacturer be liable for any direct, indirect, special, incidental, or consequential damages arising from the use or inability to use the product or documentation, even if advised of the possibility of such damages. About This Manual This user’s manual provides the general information and installation instructions for the product. The manual is meant for the experienced users and integrators with hardware knowledge of personal computers. If you are not sure about any description in this manual, consult your vendor before further handling. This product is a Personal digital assistant that provides computing and information storage and retrieval capabilities for personal or business use, often for keeping schedules, calendars and address book information handy. This device is human–computer interaction in which a computer is expected to be transported during normal usage, which allows for transmission of data, voi ce and video. - v - - Preface Contents Declaration of Conformity CE Hereby, Industrea Mining Technology., declares that this Personal Digital Assistant/ PROD1185, is in compliance with the essential Requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU. contact person Handheld Group AB Kinnegatan 17A 53133 LIDKÖPING Sweden Tel: +46 (0)510 54 71 70 Email: [email protected] - vi - - Preface Manufacturer Name: Industrea Mining Technology Manufacturer Address: 3 Co-Wyn Close, Fountaindale, New South Wales, 2258, Australia Operation Frequency: LTE-FDD/ B1:1920~1980MHz B2:1850~1910MHz B3:1710~1785MHz B4:1710~1755MHz B5:824~849MHz B7:2500~2570MHz B8:880~915MHz B12:698~716MHz B13:777~787MHz B18: 815~830MHz B19:830~845MHz B20:832~862MHz B25:1850~1915MHz B26:814~849MHz B28:703~748MHz LTE-TDD/ B38:2570~2620MHz B39:1880~1920MHz B40:2300~2400MHz B41:2496~2690MHz WCDMA/ B1:1920~1980MHz B2:1850~1910MHz B4:1710~1755MHz B5:824~849MHz B6:830~840MHz B8:880~915MHz B19: :830~845MHz GSM/ GSM850: 824~849MHz GSM900: 880~915MHz DCS1800: 1710~1785MHz PCS1900: 1850~1910MHz Wi-Fi: 802.11b/g/n HT20: 2412-2472MHz 802.11a/n/ac: 5150-5250MHz - vii - - Bluetooth: 2402-2480MHz RFID:13.56MHz Max. EIRP: 13.56MHz NFC‐48.95dBμA/m@3m Bluetooth 6.69dBm (EIRP) WLAN 2.4GHz band16.95dBm (EIRP) WLAN U‐NII‐1 band 21.33dBm (EIRP) GSM 900 band33±2dBm DCS 1800 band30±2dBm UMTS Bands24+1.7/‐2.7dBm LTE bands23±2.7dBm This product is intended for sale and application in a business environment. - viii - - FCC Warning: This device complies with Part 15 of FCC Regulations. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the guarantee of this device could void the user’s authority to operate the device. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Regulations. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a different circuit from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncont rolled environment. This equipment should be installed and operated with a minim um distance of 20 cm between the radiator and a human body. - ix - - Preface IC Warning: This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement. Cet équipement est conforme aux limites d'exposition aux rayonnements ISED définies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et un corps humain. 5150–5250 MHz is only for indoor use 5150–5250 MHz est uniquement pour une utilisation en intérieur - vi - Preface RoHS Industrea Mining T…

Text truncated - open the document above for the full version.

QF094234 Page 1 of 1 Revision 0 Industrea Mining Technology PTY LTD 3 Co-Wyn Close, NSW, 2258, Australia www.wabteccorp.com Authority to Act as Agent Date: 2020-07-24 TUV Rheinland Group 762 Park Avenue Youngsville, NC 27596 To Whom It May Concern: I appoint TUV Taiwan to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with Industrea Mining Technology / 3 Co-Wyn Close, Fountaindale, New South Wales, 2258, Australia For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: Permanent By : Renee Jones (Signature) (Print Name) Title : Senior Product Staff Manager Telephone : +61 4 37540360 On behalf of : Industrea Mining Technology (Company Name)

Industrea Mining Technology PTY LTD 3 Co-Wyn Close, NSW, 2258, Australia www.wabteccorp.com Confidentiality Letter Date: 2020-07-24 Subject: Confidentiality Request for FCC ID: YIY-PROD1185 and IC: 8903A-PROD1185 ; Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Part List/Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent User’s Manual Industrea Mining Technology has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04- 1705. Sincerely, By: Renee Jones (Signature/Title) (Print name)

Appendix EP Photographs of EUT Page 1 of 17 60409339 001, 60409340 001 60409341 001, 60409343 001 60409345 001, 60409346 001 60409347 001, 60409348 001 60409349 001, 60409350 001 Product: Personal Digital Assistant Type Identification: PROD1185 Appendix EP Photographs of EUT Page 2 of 17 60409339 001, 60409340 001 60409341 001, 60409343 001 60409345 001, 60409346 001 60409347 001, 60409348 001 60409349 001, 60409350 001 Product: Personal Digital Assistant Type Identification: PROD1185 Appendix EP Photographs of EUT Page 3 of 17 60409339 001, 60409340 001 60409341 001, 60409343 001 60409345 001, 60409346 001 60409347 001, 60409348 001 60409349 001, 60409350 001 Product: Personal Digital Assistant Type Identification: PROD1185 Appendix EP Photographs of EUT Page 4 of 17 60409339 001, 60409340 001 60409341 001, 60409343 001 60409345 001, 60409346 001 60409347 001, 60409348 001 60409349 001, 60409350 001 Product: Personal Digital Assistant Type Identification: PROD1185

Label

Prü fbericht - Produkte Test Report - Products Prü fbericht-Nr.: Test report no.: 60409345 001 Auftrags-Nr.: Order no.: 238487137 Seite 1 von 22 Page 1 of 22 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 29-May-2020 Auftraggeber: Client: Industrea Mining Technology Pty Ltd 3 Co-Wyn Close, Fountaindale, NSW, 2258, Australia Prü fgegenstand: Test item: Personal Digital Assistant Bezeichnung / Typ-Nr.: Identification / Type no.: PROD1185 Auftrags-Inhalt: Order content: FCC Part 15C Test report (RFID) Prü fgrundlage: Test specification: FCC 47CFR Part 15: Subpart C Section 15.225 Wareneingangsdatum: Date of sample receipt: 14-Jul-2020 Prü fmuster-Nr.: Test sample no: A002866252-009 Prü fzeitraum: Testing period: 7-Aug-2020 ~ 10-Aug-2020 Ort der Prü fung: Place of testing: EMC/RF Laboratory Taipei Prü flaboratorium: Testing laboratory: Taipei Testing Laboratories Prü fergebnis*: Test result*: Pass ü berprü ft von: reviewed by: Ryan W.T. Chen genehmigt von authorized by: Brenda S.H. Chen Datum: 25-Aug-2020 Date: Datum: 25-Aug-2020 Date: Stellung / Position: Project Manager Stellung / Position: Project Manager Sonstiges / Other: Zustand des Prü fgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: 1 = sehr gut 2 = gut 3 = befriedigend 4 = ausreichend 5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prü fbericht bezieht sich nur auf das o.g. Prü fmuster und darf ohne Genehmigung der Prü fstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prü fzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland Taiwan Ltd. 11F., No. 758, Sec. 4, Bade Rd., Taipei 105, Taiwan, R.O.C. Mail: [email protected] Web: www.tuv.com Produkte Products Prü fbericht - Nr.: Test Report No. 60409345 001 Seite 2 von 22 Page 2 of 22 TEST SUMMARY Report Section FCC Clause Test Item Result 5.1.1 15.203 Antenna Requirement Pass 5.1.2 15.225 (a)(b)(c) Field Strength of Fundamental Emissions Pass 5.1.3 15.225 (d) Radiated Spurious Emissions Pass 5.1.4 15.225 (e) Frequency Stability Pass 5.1.5 15.215 (c) 20 dB Bandwidth Pass - 15.207 Mains Conducted Emission N/A Note: Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. Produkte Products Prü fbericht - Nr.: Test Report No. 60409345 001 Seite 3 von 22 Page 3 of 22 Contents HISTORY OF THIS TEST REPORT .............................................................................. 4 1. GENERAL REMARKS ............................................................................................. 5 1.1 COMPLEMENTARY MATERIALS ............................................................................... 5 1.2 DECISION RULE OF CONFORMITY ........................................................................... 5 2. TEST SITES .......................................................................................................... 6 2.1 TEST LABORATORY .............................................................................................. 6 2.2 TEST FACILITY ...................................................................................................... 6 2.3 TRACEABILITY ...................................................................................................... 7 2.4 CALIBRATION ....................................................................................................... 7 2.5 MEASUREMENT UNCERTAINTY ............................................................................... 7 3. GENERAL PRODUCT INFORMATION ......................................................................... 8 3.1 PRODUCT FUNCTION AND INTENDED USE ............................................................... 8 3.2 SYSTEM DETAILS AND RATINGS ............................................................................. 8 3.3 NOISE GENERATING AND NOISE SUPPRESSING PARTS ............................................ 9 3.4 SUBMITTED DOCUMENTS ....................................................................................... 9 4. TEST SET-UP AND OPERATION MODES ................................................................. 10 4.1 PRINCIPLE OF CONFIGURATION SELECTION .......................................................... 10 4.2 TEST OPERATION AND TEST SOFTWARE ............................................................... 10 4.3 SPECIAL ACCESSORIES AND AUXILIARY EQUIPMENT ............................................. 11 4.4 TEST SETUP DIAGRAM ........................................................................................ 11 5. TEST RESULTS ................................................................................................... 12 5.1 TRANSMITTER REQUIREMENT & TEST SUITES ....................................................... 12 5.1.1 Antenna Requirement .............................................................................................................12 5.1.2 Field Strength of Fundamental Emissions ..............................................................................13 5.1.3 Radiated Spurious Emissions .................................................................................................16 5.1.4 Frequency Stability ..................................................................................................................20 5.1.5 20 dB Bandwidth ............................…

Text truncated - open the document above for the full version.

Appendix SP Photographs of Test Setup Page 1 of 2 60409345 001, 60409350 001 Product: Personal Digital Assistant Type Identification: PROD1185 Photograph 1: Test Setup for Spurious Emissions (Front View 1) Photograph 2: Test Setup for Spurious Emissions (Front View 2) Appendix SP Photographs of Test Setup Page 2 of 2 60409345 001, 60409350 001 Product: Personal Digital Assistant Type Identification: PROD1185 Photograph 3: Test Setup for Spurious Emissions (Back View 1)