YJW-09140PGFast Wireless Charger

15W Fast Wireless Charging Stand 23 Specs Wireless Charging Pad, Dual Coil: • Input: 5VDC/2A; 9VDC/1.67A; 12VDC/1.5A • Output: Up to 15W (Fast Charge) Qualcomm ® 3.0 Wall Charger: • Input: 100-240V~0.5A 50-60Hz • Output: 5V/3A, 9V/2A, 12V/1.5A * Charging time may vary based on device CAUTION: DO NOT place any credit cards or other types of magnetic material near the charging pad. This product can ONLY be charged using the provided adapters and cables. Do not attempt to disassemble the wireless charging pad as it may short circuit or damage the product. Keep this product in a dry and ventilated space. Do not place in direct heat or use in high humidity environments. Do not use organic solvents to clean surface. ENGLISH 45 Using your Fast Wireless Charging Pad 1. Connect the charge/sync cable to the Micro-USB port on your Fast Wireless Charging Pad. 2. Plug the USB connector into the wall charger. 3. Plug in the wall charger. 4. Place your Qi-enabled device on the Fast Wireless Charging Pad with the screen facing up. The LED is white when your device is charging. Charging Indicator Light Status: RED LIGHT: Device is not charging properly. Please reposition your device until you see the white light come on. WHITE LIGHT: Device is charging. ENGLISH ENGLISH One Year Limited Warranty This wireless product is covered by a limited warranty to the original purchaser only in that this product is free from defects in workmanship and materials for ONE YEAR from the date of purchase (damages through normal wear and tear, alteration, misuse, neglect, accident, service by anyone other than the authorized service center, or act of God not included). During the warranty period and with proper proof of purchase, this wireless product will be replaced. This limited warranty is in lieu of all other warranties, express or implied, including, but not limited to, implied warranty of merchantability or fitness for a particular use. For all warranty claims, the product must be returned in accordance with PureGear's return policy. The ‘Qi’ symbol is a trademark of the Wireless Power Consortium. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. 67 ENGLISH FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 8 inches between the radiator & your body. FCC Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. ENGLISH FCC Interference Statement (cont.) This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maybe cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into and outlet on a circuit different form that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body 8 15 W Support de charge rapide sans fil ENGLISH IC Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 1011 Caractéristiques Socle de charge sans fil, double bobines : • Entrée : 5 V c.c. / 2 A; 9 V c.c. / 1,67 A; 12 V c.c./1,5 A • Sortie : jusqu’à 15 W (charge rapide) Adaptateur C.A. : • Entrée : 100-240 V ~ 0,5 A 50-60 Hz • Sortie : 5V/3 A, 9 V/ 2 A, 12V/1,5 A * Temps de recharge peuvent varier en fonction d'appareil MISE EN GARDE : NE placez PAS de carte de crédit ou tout autre type de matériau magnétique près du socle de charge. Ce produit peut être chargé UNIQUEMENT au moyen des câbles et adaptateurs fournis. N’essayez pas de démonter le socle de charge sans fil car vous risqueriez de provoquer un court-circuit ou d’endommager le produit. Gardez ce produit dans un endroit sec et bien ventilé. Ne le placez pas près d’une source de chaleur directe ou dans des endroits soumis à l'humidité élevée. N’utilisez pas de solvants organiques pour nettoyer la surface. Utilisation de votre socle de charge sans fil 1. Branchez le câble de charge/synchronisation sur le port Micro-USB de votre socle de charge sans fil. 2. Branchez le…

Text truncated - open the document above for the full version.

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Superior communications. Address: 5027 Irwindale Ave.Suite Irwindale Ave, CA 91706 Product Name: Fast Wireless Charger Model Number: 09140PG FCC Identifier: YJW-09140PG We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: George Chen Date: 12/17/2020 Title: VP Product Development Signature of applicant:

c5266091_X10_Ed,1 Superior communications. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: LZIBI2OZO Subject: Request for Confidentiality FCC ID: YJW-09140PG To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confldential document from public disclosure. Exhibits Long-Term Confidentialitv Short-Term Confidentialitv ID Label/Location No No Attestation Statement No No External Photos No U Block Diaqram x tr Schematics X tr Test Report No No Test Setup Photos No u User's Manual tr tl Internal Photos ! n Parts List / Tune Up tr tr RF Exoosure Info tr n Ooerational Descriotion X n Cover Letter(s) No No SDR Software / Security Info trNo Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment' The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test repots, FCC ID label format and correspondent during lertiflcation review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Sisnature: H/ - Name: George Ghen Date: I2lBl2020 Title: VP Product Development U7

1 - Page 1 of 5 - Report No.: MTi20102615-3E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. APPENDIX 1: EUT PHOTO Photo 1 (For model 09140PG) Photo 2 1 - Page 2 of 5 - Report No.: MTi20102615-3E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Photo 3 Photo 4 1 - Page 3 of 5 - Report No.: MTi20102615-3E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Photo 5 Photo 6 1 - Page 4 of 5 - Report No.: MTi20102615-3E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Photo 7 Photo 8 1 - Page 5 of 5 - Report No.: MTi20102615-3E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Photo 9 ----END OF REPORT----

Micro 34mm 28mm 34mm 28mm

1 - Page 1 of 3 - Report No.: MTi20102615-3E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. APPENDIX 1: EUT PHOTO Photo 1 (For model 09140PG) Photo 2 1 - Page 2 of 3 - Report No.: MTi20102615-3E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Photo 3 Photo 4 1 - Page 3 of 3 - Report No.: MTi20102615-3E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Photo 5 ----END OF REPORT---- Coil antenna

This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen Microtest Co., Ltd. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. EXPOSURE REPORT FCC ID: YJW-09140PG Date of issue: Dec. 04, 2020 Report Number: MTi20102615-3E2 Sample Description: Fast Wireless Charger Mo d e l( s ) : 09140PG Applicant: Superior communications. Address: 5027 Irwindale Ave.Suite Irwindale Ave, CA 91706 Date of Test: Oct. 27, 2020 - Dec. 03, 2020 Shenzhen Microtest Co., Ltd. http://www.mtitest.com - Page 2 of 9 - Report No.: MTi20102615-3E2 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Test Result Certification Applicant’s name: Superior communications. Address: 5027 Irwindale Ave.Suite Irwindale Ave, CA 91706 Manufacture's name: Dong Guan Superior Communications Co., Ltd. Address: NO 100 Li xiang East Road Shui Ping Village Dalang Town, Dong Guan City, Guang Dong Product name: Fast Wireless Charger Trademark: PUREGEAR Model name: 09140PG Standard: FCC CFR 47 PART 1 , 1.1310 RF Exposure Procedures: KDB 680106 D01 RF Exposure Wireless Charging App v03 This device described above has been tested by Shenzhen Microtest Co., Ltd. and the test results show that the equipment under test (EUT) compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Tested by: Demi Mu Dec. 03, 2020 Reviewed by: Leo Su Dec. 04, 2020 Approved by: Tom Xue Dec. 04, 2020 - Page 3 of 9 - Report No.: MTi20102615-3E2 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. 1 General Information 1.1 Description of EUT Product name: Fast Wireless Charger Brand name: PUREGEAR Model name: 09140PG Series model: N/A Deference in serial model: N/A Operation frequency: 115–205 kHz Operational mode: Wireless charging Modulation type: ASK Antenna type: Coil Antenna Power source: DC 12V from adapter AC 120V/60Hz Battery: N/A Adapter information: Model:08501SCP Input:100-240V~0.5A 50-60Hz Output:5V 3A,9V 2A,12V 1.5A 1.2 Ancillary equipment list Equipment Model S/N Manufacturer Phone IN1020 / ONEPLUS 1.3 Measurement uncertainty Measurement Uncertainty for a Level of Confidence of 95 %, U=2xUc(y) Radiated emission(150kHz~30MHz) ± 2.5 dB Radiated emission(30MHz~1GHz) ± 4.2 dB Radiated emission (above 1GHz) ± 4.3 dB Temperature ±1 degree Humidity ± 5 % - Page 4 of 9 - Report No.: MTi20102615-3E2 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. 2 Testing site Test Site Shenzhen Microtest Co., Ltd Test Site Location 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. FCC Registration No.: 448573 - Page 5 of 9 - Report No.: MTi20102615-3E2 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. 3 List of test equipment Equipment No. Equipment Name Manufacturer Model Serial No. Calibration date Due date MTI-E060 Broadband Field Meter Narda Safety Test Solutions GmbH NBM- 520 D-1699 2020/06/22 2021/06/21 MTI-E061 Probe E-Field Narda Safety Test Solutions EF0691 H-0571 2020/06/22 2021/06/21 - Page 6 of 9 - Report No.: MTi20102615-3E2 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. 4 Test Results 4.4 Maximum permissible exposure 4.4.1 Limit Frequency range(MHz) Electric field strength(V/m) Magnetic field strength(A/m) Power density(mW/cm2) Averaging time(minutes) (A) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *100 6 3.0-30 1842/f 4.89/f *900/f 2 6 30-300 61.4 0.163 1.0 6 6 300-1500 f/300 6 1500-100000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *100 30 1.34-30 824/f 2.19/f *180/f 2 30 30-300 27.5 0.073 0.2 30 300-1500 f/1500 30 1500-100000 1 30 f = frequency in MHz * = Plane-wave equivalent power density 4.4.2 Test Procedures E and H-field measurements should be made with the center of the probe at a distance of 15 cm surrounding the device and 20 cm above the top surface of the primary/client pair. These measurements should be repeated for three different client battery levels, 1%, 50%, and 99%. Record the test results. KDB 680106 D01 RF Exposure Wireless Charging App v03: (1) Power transfer frequency is less than 1MHz. (2) Output power from each primary coil is less than or equal to 15 watts. (3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. (4) Client device is placed directly in contact with the transmitter. (5) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). (6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. - Page 7…

Text truncated - open the document above for the full version.

This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen Microtest Co., Ltd. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Test Report FCC ID: YJW-09140PG Date of issue: Dec. 04, 2020 Report number: MTi20102615-3E1 Sample description: Fast Wireless Charger Mo d e l( s ) : 09140PG Applicant: Superior communications. Address: 5027 Irwindale Ave.Suite Irwindale Ave, CA 91706 Date of test: Oct. 27, 2020 – Dec. 03, 2020 Shenzhen Microtest Co., Ltd. http://www.mtitest.com - Page 2 of 23 - Report No.: MTi20102615-3E1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Table of Contents 1 GENERAL INFORMATION ................................................................................................................................... 4 1.1 FEATURE OF EQUIPMENT UNDER TEST (EUT) ................................................................................................................... 4 1.2 TEST MODE .............................................................................................................................................................. 4 1.3 EUT TEST SETUP........................................................................................................................................................ 4 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 4 2 SUMMARY OF TEST RESULT ............................................................................................................................... 5 2.1 OPERATION CHANNEL LIST ........................................................................................................................................... 5 2.2 TEST CHANNEL .......................................................................................................................................................... 5 3 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 6 3.1 TEST LABORATORY ..................................................................................................................................................... 6 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 6 3.3 MEASUREMENT UNCERTAINTY ...................................................................................................................................... 6 3.4 TEST SOFTWARE ........................................................................................................................................................ 6 4 LIST OF TEST EQUIPMENT .................................................................................................................................. 7 5 TEST RESULTS ..................................................................................................................................................... 8 5.1 ANTENNA REQUIREMENT ............................................................................................................................................ 8 5.1.1 Standard requirement ................................................................................................................................. 8 5.1.2 EUT Antenna ............................................................................................................................................... 8 5.2 CONDUCTED EMISSION ............................................................................................................................................... 9 5.2.1 Limits ........................................................................................................................................................... 9 5.2.2 Test Procedures ........................................................................................................................................... 9 5.2.3 Test Setup .................................................................................................................................................... 9 5.2.4 Test Result ................................................................................................................................................... 9 5.3 RADIATED EMISSION ................................................................................................................................................. 14 5.3.1 Limits ......................................................................................................................................................... 14 5.3.2 Test Procedures ......................................................................................................................................... 15 5.3.3 Test Setup .................................................................................................................................................. 16 5.3.4 Test Result ................................................................................................................................................. 16 5.4 OCCUPIED BANDWIDTH............................................................................................................................................. 20 5.4.1 Test method .........................................................................................................................…

Text truncated - open the document above for the full version.

Model: 09140PG Radiated emission Conducted emission