YJW-09638PG-VNFast Magnetic Wireless Charger

Fast Magnetic Wireless Charger with Built-in Kickstand 23 ENGLISH Specs •Input: 12V/1.67A •Output: Up to 15W (Fast Charge) * Charging time may vary based on device ** NOTE: A 20W or higher USB-C ™ Power Adapter is recommended (sold separately) to enable fast wireless charging. Caution DO NOT place any credit cards or other types of magnetic material near the charging pad. Do not attempt to disassemble the wireless charging pad as it may short circuit or damage the product. Keep at least 8” (20cm) distance between implantable medical devices such as pacemakers, cochlear implants, etc. Keep this product in a dry and ventilated space. Do not place in direct heat or use in high humidity environments. Do not use organic solvents to clean surface. 45 ENGLISH ENGLISH Using your Fast Magnetic Wireless Charger 1. Plug the USB-C connector into the wall charger (not included). 2. Plug in the wall charger (20W PD charger recommended). 3. Place the PureGear Magnetic Wireless Charger onto the back of your MagSafe® device until it automatically aligns and snaps into place. FCC Interference Statement This equipment generates, uses and can radiate radio frequency energy; if not installed and used in accordance with the instructions, maybe cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into and outlet on a circuit different form that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. A distance of 15 cm shall be maintained between the antenna and users, and the transmitter may not be co‐located with any other transmitte r or antenna. 67 ENGLISH ENGLISH IC Statement This device contains license-exempt transmitter(s)/receiver(s)/ that comply with Innovation Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Radiation Exposure: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment; To maintain compliance with IC’s RF Exposure guidelines: (1) This equipment should be installed and operated with a minimum distance of 10cm from your body. (2) This device and its antenna(s) must not be located or operated in conjunction with any other antenna or transmitter. Lifetime Warranty This product is fully warranted against defects in materials and workmanship for the lifetime of the product, so long as the manufacturer continues to make this product. If a product fails due to a manufacturing defect, we will replace it upon proper proof of purchase by the original purchaser. Replacement product will be subject to shipping and handling charges. Damages through normal wear and tear, alteration, misuse, neglect, accident, service by anyone other than the authorized service center, or act of God, are not covered by this warranty. For all warranty claims, the product must be returned in accordance with PureGear’s return policy. All trademarks and trade names are used for reference purposes only and are the property of their respective owners. 89 Chargeur magnétique rapide sans fil avec béquille intégrée Caractéristiques •Entrée : 12V/1,67A •Sortie : Jusqu’à 15 W (charge rapide) * Le temps de charge peut varier selon l’appareil ** REMARQUE : Un adaptateur d’alimentation USB-C de 20 W ou plus est recommandé (non inclus) pour permettre une charge rapide sans fil. Mise en garde NE placez PAS de carte de crédit ou tout autre type de matériau magnétique près du socle de charge. N’essayez pas de démonter le socle de charge sans fil car vous risqueriez de provoquer un court- circuit ou d’endommager le produit. Gardez une distance d’au moins 8 po (20 cm) entre les appareils médicaux implantables tels que les stimulateurs cardiaques, les implants cochléaires, etc. Gardez ce produit dans un endroit sec et bien ventilé. Ne le placez pas près d’une source de chaleur directe ou dans des endroits soumis à des taux d’humidité élevés. N’utilisez pas de solvants organiques pour nettoyer la surface. FRANÇAIS 10 11 Utilisation de votre chargeur magnétique rapide sans fil 1. Branchez le connecteur USB-C dans le chargeur mural (non inclus). 2. Branchez le chargeur mural (un adaptateur d’alimentation USB-C de 20 W ou plus est recommandé). 3. Déposez le chargeur magnétique sans fil PureGear sur la face arrière de votre appareil MagSafe jusqu’à ce qu’il s’aligne s’enclenche automatiquement. Déclaration relative aux limites des interférences établies par la FCC Cet équipement génère, utilise et peut émettre de l’énergie radioélectrique et, s’il n’est pas installé et utilisé tel qu’il est indiqué dans le guide d’utilisation, il peut causer des interférences dans les communications radio. Cependant, il n’existe aucune garantie que des interférences ne se produiront pas dans une installation particulière. Si cet équipement cause effectivement des interférences nuisibles lors de la réception d’émissions radio ou télévisées (et il suffit, pour s’en rendre compte d’allumer et d’éteindre l’appareil), l’utilisateur devra tenter de corriger ces interférences en prenant l’une ou plusieurs des mesures suivantes : •Réorienter ou changer la position de l’antenne réceptrice. •Augmenter la distance entre l’équipement et le récepteur. •Brancher l’équipement sur une prise de courant appartenant à un circuit différent de celui sur lequel est branché le récepteur. •Demander l…

Text truncated - open the document above for the full version.

Superior communications. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Superior communications. Address: 5027 Irwindale Ave.Suite, Irwindale Ave, California, 91706, United States Product Name: Fast Magnetic Wireless Charger FCC ID: YJW-09638PG-VN Model(s): 09638PG-VN 2.911(d)(5)(i) Equipment Type We, [Superior communications.] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: George Chen Date: Feb. 16, 2023 Title: VP Product Development Company name: Superior communications. Signature: NOTE 1 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Superior communications. 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Superior communications. Address: 5027 Irwindale Ave.Suite, Irwindale Ave, California, 91706, United States Product Name: Fast Magnetic Wireless Charger FCC ID: YJW-09638PG-VN Model(s): 09638PG-VN 2.911(d)(5)(ii) Applicant filing We, [Superior communications.] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 ,established pursuant to §1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: George Chen Date: Feb. 16, 2023 Title: VP Product Development Company name: Superior communications. Signature: NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Superior communications. 2.911 (d)(7)USA Agentv1.3 Section 2.911(d)(7) USA Agent for Service of Process Company name: Superior communications. Address: 5027 Irwindale Ave.Suite, Irwindale Ave, California, 91706, United States Product Name: Fast Magnetic Wireless Charger FCC ID: YJW-09638PG-VN Model(s): 09638PG-VN 2.911(d)(7) USA Designated Agent for Service of Process We, [Superior communications.] (“the applicant”) designate [Superior communications.] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Superior communications. Address: 5027 Irwindale Ave.Suite, Irwindale Ave, California, 91706, United States Applicant Company name: Superior communications. Address: 5027 Irwindale Ave.Suite, Irwindale Ave, California, 91706, United States Superior communications. 2.911 (d)(7)USA Agentv1.3 FCC Registration Number FRN: 0019944727 Contact Name: George Chen Telephone No: 818-636-4985 Email: [email protected] FCC Grantee Code: YJW Contact Name: George Chen Telephone No: 818-636-4985 Email: [email protected] Signature: Title: VP Product Development Signature: Title: VP Product Development Date: Feb. 16, 2023 Date: Feb. 16, 2023 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

Superior communications. Agent Authorization Company: Superior communications. Address: 5027 Irwindale Ave.Suite, Irwindale Ave, California, 91706, United States Product Name: Fast Magnetic Wireless Charger Model Number(s): 09638PG-VN Product Description: Fast Magnetic Wireless Charger We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Feb. 16, 2023 Name: George Chen Title: VP Product Development Company: Superior communications.

Superior communications. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Feb. 16, 2023 Subject; Request for Confidentiality FCC ID: YJW-09638PG-VN To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: George Chen Title: VP Product Development

Annex A External Photos Test Model No.: 09638PG-VN Page 1 of 4 Test Model No.: 09638PG-VN Page 2 of 4 Test Model No.: 09638PG-VN Page 3 of 4 Test Model No.: 09638PG-VN Page 4 of 4

FCC ID LABEL: Ca. 10mm x 20mm Label Location FCC ID: YJW-09638PG-VN

Annex B Internal Photo Test Model No.: 09638PG-VN Page 1 of 2 Antenna Antenna Test Model No.: 09638PG-VN Page 2 of 2

Page 1 of 11 Report No.: HK2212075541-2E FCC Test Report Test report On Behalf of Superior communications. For Fast Magnetic Wireless Charger Model No.: 09638PG-VN FCC ID: YJW-09638PG-VN Prepared For : Superior communications. 5027 Irwindale Ave.Suite, Irwindale Ave, California, 91706, United States Prepared By : Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: Dec. 07, 2022 ~ Jan. 05, 2023 Date of Report: Jan. 05, 2023 Report Number: HK2212075541-2E Page 2 of 11 Report No.: HK2212075541-2E TEST RESULT CERTIFICATION Applicant’s name ................. : Superior communications. Address.................................. : 5027 Irwindale Ave.Suite, Irwindale Ave, California, 91706, United States Manufacture's Name ............ : Superior communications. Address.................................. : 5027 Irwindale Ave.Suite, Irwindale Ave, California, 91706, United States Product description Trade Mark: Product name............................ : Fast Magnetic Wireless Charger Model and/or type reference : 09638PG-VN Standards ............................. : FCC CFR 47 PART 18 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test ............................................ : Date (s) of performance of tests ............. : Dec. 07, 2022 ~ Jan. 05, 2023 Date of Issue ........................................... : Jan. 05, 2023 Test Result ............................................... : Pass Testing Engineer : (Gary Qian) Technical Manager : (Eden Hu) Authorized Signatory : (Jason Zhou) Page 3 of 11 Report No.: HK2212075541-2E Note: 1. For a more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. 2. Channel List Channel Frequency (KHz) Channel Frequency (MHz) Channel Frequency (MHz) Channel Frequency (MHz) 01 134 The EUT antenna is Coil Antenna. No antenna other than that furnished by the responsible party shall be used with the device. 2. SUMMARY OF TEST RESULTS 2.1. Test procedures according to the technical standards: FCC KDB680106 D01 RF Exposure Wireless Charging Apps v03r01 FCC CFR 47 Standard Section Test Item Judgment Remark FCC CFR 47 part1, 1.1310 KDB680106 D01v03r01 (3)(3) Electric Field Strength (E) (V/m) PASS Magnetic Field Strength (H) (A/m) PASS 2.2. Measurement Uncertainty The reported uncertainty of measurement y ±U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 All emissions, radiated(<30M)(9KHz-30MHz) ±3.90dB 2 Temperature ±0.5°C 3 Humidity ±2% Page 4 of 11 Report No.: HK2212075541-2E 2.3. Test Mode EUT Mode Description Cell phone setting 15W 2.4. Test Instruments Description Brand Model No. Frequency Range Calibrated Date Calibrated Until Exposure Level Te s t e r narda ELT-400 N-0231 Feb. 18, 2022 Feb. 17, 2023 Magnetic field probe 100cm 2 narda ELT probe 100cm2 M0675 Feb. 18, 2022 Feb. 17, 2023 NOTE: 1. The calibration interval of the above test instruments is 12 months. Page 5 of 11 Report No.: HK2212075541-2E 3. MAXIMUM PERMISSIBLE EXPOSURE Limit of Maximum Permissible Exposure Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180 / f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1 30 Note 1: f = frequency in MHz ; *Plane-wave equivalent power density. Note 2: For the applicable limit, see FCC 1.1310, 680106 D01 RF Exposure Wireless Charging Apps v03r01. Note 3: Emissions between 100 kHz to 300 kHz should be assessed versus the limits at 300 kHz in Table 1 of Section 1.1310: 614 V/m and 1.63A/m. A KDB inquiry is required to determine the applicable exposure limits below 100 kHz. Page 6 of 11 Report No.: HK2212075541-2E 4. TEST PROCEDURE a. For devices designed for typical desktop applications, such a wireless charging pads, RF exposure evaluation should be conducted assuming a user separation distance of (H-field & E- field strengths for all sides is 15cm, H-field strengths of top side is 20cm). E and H field strength measurements or numerical modeling may be used to demonstrate compliance. Measurements should be made from all sides and the top of the primary/client pair, with the 15 cm measured from the center of the probe(s) to the edge of the device. 4.1 Test Setup 4.2 Result Of Maximum Permissible Exposure Page 7 of 11 Report No.: HK2212075541-2E All the test modes completed for test. Only the worst result (15W) as below. For Full load mode: H-Field Strength at 15 cm (E top side: 20cm) from the edges surrounding the EUT (A/m) Field strength Te s t Position A Te s t Position B Te s t Position C Te s t Position D Te s t Position E Limits (A/m) uT 0.446 0.434 0.617 0.561 0.434 / A/m 0.357 0.347 0.494 0.449 0.347 1.63 Note. Calculation: A/m=uT/1.25 For Half Load mode: H-Field Strength at 15 cm (E top side: 20cm) from the edges surrounding the EUT (A/m) Field strength Te s t Position A Te s t Position B Te s t Position C Te s t Position…

Text truncated - open the document above for the full version.

Page 1 of 21 Report No.: HK2212075541-1E FCC Test Report Test report On Behalf of Superior communications. For Fast Magnetic Wireless Charger Model No.: 09638PG-VN FCC ID: YJW-09638PG-VN Prepared For : Superior communications. 5027 Irwindale Ave.Suite, Irwindale Ave, California, 91706, United States Prepared By : Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: Dec. 07, 2022 ~ Jan. 05, 2023 Date of Report: Jan. 05, 2023 Report Number: HK2212075541-1E Page 2 of 21 Report No.: HK2212075541-1E TEST RESULT CERTIFICATION Applicant’s name ................. : Superior communications. Address.................................. : 5027 Irwindale Ave.Suite, Irwindale Ave, California, 91706, United States Manufacture's Name ............ : Superior communications. Address.................................. : 5027 Irwindale Ave.Suite, Irwindale Ave, California, 91706, United States Product description Trade Mark: Product name............................ : Fast Magnetic Wireless Charger Model and/or type reference : 09638PG-VN Standards ............................. : FCC CFR 47 PART 18 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test ............................................ : Date (s) of performance of tests ............. : Dec. 07, 2022 ~ Jan. 05, 2023 Date of Issue ........................................... : Jan. 05, 2023 Test Result ............................................... : Pass Testing Engineer : (Gary Qian) Technical Manager : (Eden Hu) Authorized Signatory : (Jason Zhou) Page 3 of 21 Report No.: HK2212075541-1E Table of Contents Page 1 . TEST SUMMARY 5 1.1 . Test Procedures And Results 5 1.2 . Information of the Test Laboratory 5 1.3 . Measurement Uncertainty 5 2. GENERAL INFORMATION 6 2.1. General Description of EUT 6 2.2. Carrier Frequency of Channels 7 2.3. Operation of EUT during testing 7 2.4. Test Mode 7 2.5. Description of Test Setup 8 2.6. Measurement Instruments List 9 3. CONDUCTED EMISSION TEST 10 3.1. Block Diagram of Test Setup 10 3.2. Conducted Power Line Emission Limit 10 3.3. Test Procedure 10 4. RADIATED EMISSIONS 13 4.1. Block Diagram of Test Setup 13 4.2. Rules and specifications 13 4.3. Test Procedure 14 4.4. Test Result 14 5. ANTENNA REQUIREMENT 18 6. PHOTOGRAPH OF TEST 19 7. PHOTOS OF THE EUT 21 Page 4 of 21 Report No.: HK2212075541-1E ** Modified History ** Revision Description Issued Data Remark Revision 1.0 Initial Test Report Release Jan. 05, 2023 Jason Zhou Page 5 of 21 Report No.: HK2212075541-1E 1. TEST SUMMARY 1.1. Test Procedures And Results DESCRIPTION OF TEST SECTION NUMBERRESULT CONDUCTED EMISSIONS TEST 18.307 COMPLIANT RADIATED EMISSION TEST 18.305 COMPLIANT Note: 1. PASS: Test item meets the requirement. 2. Fail: Test item does not meet the requirement. 3. N/A: Test case does not apply to the test object. 4. The test result judgment is decided by the limit of test standard. 1.2. Information of the Test Laboratory Shenzhen HUAK Testing Technology Co., Ltd. Add.: 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Testing Laboratory Authorization： A2LA Accreditation Code is 4781.01. FCC Designation Number is CN1229. Canada IC CAB identifier is CN0045. CNAS Registration Number is L9589. 1.3. Measurement Uncertainty Measurement Uncertainty Conducted Emission Expanded Uncertainty =2.71dB, k=2 Radiated emission expanded uncertainty(9kHz-30MHz) = 3.90dB, k=2 Radiated emission expanded uncertainty(30MHz-1000MHz)= 3.90dB, k=2 Radiated emission expanded uncertainty(Above 1GHz) = 4.28dB, k=2 Page 6 of 21 Report No.: HK2212075541-1E 2. GENERAL INFORMATION 2.1. General Description of EUT Equipment: Fast Magnetic Wireless Charger Model Name: 09638PG-VN Series Models: N/A Model Difference: N/A Trade Mark: FCC ID: YJW-09638PG-VN Antenna Type: Coil Antenna Antenna Gain: 0dBi Operation frequency: 112KHz~205KHz Test frequency: 134KHz Number of Channels: 1 Modulation Type: ASK Power Source: Input: 12V 1.67A(PD) Wireless Output: 15W Power Rating: Input: 12V 1.67A(PD) Wireless Output: 15W Page 7 of 21 Report No.: HK2212075541-1E 2.2. Carrier Frequency of Channels Operation Frequency each of channel Channel Frequency 1 134KHz 2.3. Operation of EUT during testing Operating Mode The mode is used: Transmitting mode 2.4. Test Mode EUT Mode Description Cell phone setting 15W Page 8 of 21 Report No.: HK2212075541-1E 2.5. Description of Test Setup Operation of EUT during testing: AC Plug Adapter information Model: BD-F1 Input: 100-240V, 50-60Hz,1.5A USB-C Output:(65W PD)DC 5V, 3A/9V, 3A/12V, 3A/15V, 3A/20V, 3.25A MAX The sample was placed (0.8m (30MHz~1GHz), 0.8m (9KHz~30MHz) ) above the ground plane of 3m chamber. Measurements in both horizontal and vertical polarities were performed. During the test, each emission was maximized by: having the EUT continuously working, investigated all operating modes, rotated about all 3 axis (X, Y & Z) and considered typical configuration to obtain worst position, manipulating interconnecting cables, rotating the turntable, varying antenna height from 1m to 4m in both horizontal and vertical polarizations. The emissions worst-case are shown in Test Results of the following pages. The worst case is X position. Adapter EUT Load Page 9 of 21 Report No.: HK2212075541-1E 2.6. Measurement Instruments List Item Equipment Manufacturer Model No.Serial No. Last Cal. Cal. Interval 1. L.I.S.N. Artificial Mains Network R&S ENV216 HKE-002 Feb. 18, 20221 Year 2. Recei…

Text truncated - open the document above for the full version.