YJW-10652PG15W Wireless Charging Pad

15W FAST WIRELESS CHARGING PAD 23 ENGLISH Specs Wireless Charging Pad: • Input: 5VDC/2A; 9VDC/1.67A; 12VDC/1.5A • Output: Up to 15W (Fast Charge) ** * Charging time may vary based on device. ** NOTE: 20W USB-C Power Adapter is required (not included) to enable fast wireless charging. CAUTION: DO NOT place any credit cards or other types of magnetic material near the charging pad. This product can ONLY be charged using the provided adapters and cables. Do not attempt to disassemble the wireless charging pad as it may short circuit or damage the product. Keep this product in a dry and ventilated space. Do not place in direct heat or use in high humidity environments. Do not use organic solvents to clean surface. 45 Using your Fast Wireless Charging Pad 1. Connect the USB-C ™ cable to the USB-C port on your Fast Wireless Charging Pad. 2. Plug the USB-C connector into the wall charger. (USB-C wall charger not included.) 3. Plug in the wall charger. 4. Place your Qi-enabled device on the Fast Wireless Charging Pad with the screen facing up. The LED is white when your device is charging. Charging Indicator Light Status: ORANGE LIGHT: Device is not charging properly. Please reposition your device until you see the white light come on. WHITE LIGHT: Device is charging. ENGLISH ENGLISH Lifetime Warranty This product is fully warranted against defects in materials and workmanship for the lifetime of the product, so long as the manufacturer continues to make this product. If a product fails due to a manufacturing defect, we will replace it upon proper proof of purchase by the original purchaser. Replacement product will be subject to shipping and handling charges. Damages through normal wear and tear, alteration, misuse, neglect, accident, service by anyone other than the authorized service center, or act of God, are not covered by this warranty. For all warranty claims, the product must be returned in accordance with PureGear’s return policy. USB-C is a trademark of USB Implementers Forum. The ‘Qi’ symbol is a trademark of the Wireless Power Consortium. All trademarks and trade names are used for reference purposes only and are the property of their respective owners. 67 ENGLISH ENGLISH FCC Interference Statement (cont.) This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maybe cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into and outlet on a circuit different form that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected. (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including This device complies with Part 15 of the FCC Rules. Operation is FCC Interference Statement subject to the following two conditions: interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. 8 ENGLISH 15W Base de carga inalámbrica rápida 1011 Especificaciones Base de carga inalámbrica: • Entrada: 5Vc.c./2A; 9Vc.c./1.67A; 12Vc.c./1.5A • Salida: hasta 15W (Carga rápida) ** * Los tiempos de carga pueden variar dependiendo del tipo de dispositivo ** NOTA: Se requiere un adaptador de corriente USB-C de 20W (no incluido) para permitir una carga inalámbrica rápida PRECAUCIÓN: NO coloque ninguna tarjeta de crédito ni ningún otro tipo de material magnético cerca del panel de carga. Este producto SÓLO puede cargarse usando los cables y adaptadores suministrados. No intente desarmar el panel de carga inalámbrico, ya que puede causar un cortocircuito o dañar el producto. Mantenga este producto en un lugar seco y ventilado. No lo exponga al calor directo ni lo utilice en ambientes de mucha humedad. No utilice solventes orgánicos para limpiar la superficie. ESPAÑOL Cómo usar la base de carga inalámbrica 1. Conecte el cable USB-C al puerto USB-C en la base de carga inalámbrica. 2. Enchufe el conector USB-C al cargador de pared. (No incluye el cargador de pared USB-C.) 3. Conecte el adaptador de corriente a la toma de corriente. 4. Coloque su dispositivo habilitado con Qi en la base de carga inalámbrica con la pantalla mirando hacia arriba. La luz LED estará blanca mientras el dispositivo se esté cargando. Estado del indicador de carga: LUZ NARANJA: El dispositivo no se está cargando correctamente. LUZ BLANCA: Cargando ESPAÑOL 1213 Declaración de interferencia de la FCC Este dispositivo cumple con la Parte 15 de las reglas de la FCC. Su operación está sujeta a las siguientes dos condiciones: (1) este dispositivo no debe provocar interferencia dañina, y (2) este dispositivo debe aceptar la interferencia recibida, incluyendo la interferencia que pudiera provocar un a operación indeseable. PRECAUCIÓN: Los cambios o modificaciones que no hayan sido expresamente aprobados por la parte responsable del cumplimiento podría anular el permiso del us…

Text truncated - open the document above for the full version.

SuperiorCommunications. FederalCommunicationsCommission Authorizationand EvaluationDivision EquipmentAuthorizationBranch 7435 OaklandMills Road Columbia,MD 21046 10/18/23 U.S. AgentDesignation SuperiorCommunications.acknowledgestheir consentfor the followingcontactlocatedin the UnitedStates to act as their agentfor serviceof processfor the equipmentfor whichauthorizationis sought(FCC ID :YJW- 10652PG): Nameand companyof U.S. agent: Tim Payne,FCC US Agent,LLC PhysicalU.S. addressof agent:3722 IllinoisAvenue,Saint Charles,IL, 60174,USA FRN of U.S. agent: 0033402884 Email addressof U.S. agent: [email protected] FCC US Agent,LLCacknowledgestheir obligationto acceptserviceof processon behalfofSuperior Communications. SuperiorCommunications.with theFRN 0019944727acceptsits obligationto maintainan agent for service of processin the UnitedStatesfor no less than one year after either the granteehas permanentlyterminatedall marketingand importationof the applicableequipmentwithinthe U.S., or the conclusionof any Commission- relatedadministrativeor judicialproceedinginvolvingthe equipment,whicheveris later. By signingthis form, we confirmthe aboveand that we are awareof the applicationrequirementslisted under§ 2.911(d)(7). The informationprovidedin this letter is basedon the referencedrule parts of Title 47 of the CFR as well as KDB 986446D01. An expirationdate for this letter does not exist. In case the U.S. agent changes,the granteeis obligatedto notify the FCC within 30 days via the grantingTCB. Sincerely, Signature Chen George Manager SuperiorCommunications. Signature Tim Payne Manager FCC US Agent,LLC 48_[model] US_Agent_2.911(d)(7)-U, V05

Page1of5FCCID: YJW-10652PG DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. EUTConstructionalDetails ExternalEUTPhoto Photo1 Photo2 Page2of5FCCID: YJW-10652PG DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. Photo3 Photo4 Page3of5FCCID: YJW-10652PG DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. Photo5 Photo6 Page4of5FCCID: YJW-10652PG DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. Photo7 Photo8 Page5of5FCCID: YJW-10652PG DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. Photo9 Photo10 ---TheEnd---

Label&Labellocation FCCID:YJW-10652PG

Page1of4FCCID: YJW-10652PG DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. EUTConstructionalDetails InternalEUTPhoto Photo1 Photo2 Page2of4FCCID: YJW-10652PG DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. Photo3 Photo4 Antenna Page3of4FCCID: YJW-10652PG DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. Photo5 Photo6 Page4of4FCCID: YJW-10652PG DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. Photo7 ------End------

Page 1 of 6 FCCID:YJW-10652PG RFExposureEvaluation 1MeasuringStandard KDB680106RFExposureWirelessChargingAppsv03r01 2Requirements Accordingtotheitem5ofKDB680106v03r01: Inductivewirelesspowertransferapplicationsthatmeetallofthefollowingrequirementsareexcludedfrom submittinganRFexposureevaluation. (1)Powertransferfrequencyislessthan1MHz. (2)Outputpowerfromeachprimarycoilislessthanorequalto15watts. (3)Thesystemmayconsistofmorethanonesourceprimarycoils,chargingoneormoreclients.Ifmorethan oneprimarycoilispresent,thecoilpairsmaybepoweredonatthesametime. (4)Clientdeviceisplaceddirectlyincontactwiththetransmitter. (5)Mobileexposureconditionsonly(portableexposureconditionsarenotcoveredbythisexclusion). (6)TheaggregateH-fieldstrengthsanywhereatorbeyond15cmsurroundingthedevice,and20cm awayfromthesurfacefromallcoilsthatbydesigncansimultaneouslytransmit,andwhilethose coilsaresimultaneouslyenergized,aredemonstratedtobelessthan50%oftheapplicableMPE limit. Remark:Meetalltheaboverequirements. Limits Thecriterialistedinthefollowingtableshallbeusedtoevaluatetheenvironmentimpactofhumanexposure toradiofrequency(RF)radiationasspecifiedin1.1307(b) LimitsforMaximumPermissibleExposure(MPE) Page 2 of 6 FCCID:YJW-10652PG 3TestSetup 4TestProcedure 1)TheRFexposuretestwasperformedinanechoicchamber. 2)Themeasurementprobewasplacedattestdistance(15cmfromallsidesand20cmfromthetop)whichis betweentheedgeofthechargerandthegeometriccenterofprobe. 3)Thehighestemissionlevelwasrecordedandcomparedwithlimitassoonasmeasurementofeachpoints (A,B,C,D,E)werecompleted. 4)TheEUTwasmeasuredaccordingtothedictatesofKDB680106D01v03. Remark：TheEUT’stestpositionA,B,C,DandEisvalidfortheEandHfieldmeasurements. 5Descriptionofthetestmode Equipmentundertestwasoperatedduringthemeasurementunderthefollowing conditions: Test Mode Description Mode1 ACAdapter+EUT+ Load Record Mode2 TesttheEUTinidlemode. Pre-tested Note:1.Alltestmodeswerepre-tested,butweonlyrecordedtheworstcaseinthisreport. 2.Unfoldedandfoldedmodeweretested,butweonlyrecordedtheworstcase. Page 3 of 6 FCCID:YJW-10652PG 6PeripheralList 7TestInstrumentslist TestEquipmentManufacturerModelNo.SN. Cal.Date (mm-dd-yy) Cal.Duedate (mm-dd-yy) ElectricandMagnetic FieldAnalyzer NardaEHP-200A180ZX1050521.06.202220.06.2024 8TestResult E-FiledStrengthat15cmfromtheedgessurroundingtheEUT(V/m) UnitTestmode TM1 Test Position A Test Position B Test Position C Test Position D Test Position E 50% Limits (V/m) Limits (V/m) V/mPhoneport93.44105.4693.4192.5290.46307614 H-FiledStrengthat15cmfromtheedgessurroundingtheEUT(A/m) UnitTestmode TM1 Test Position A Test Position B Test Position C Test Position D Test Position E 50% Limits (A/m) Limits (A/m) A/mPhoneport0.2150.2330.2210.1980.2220.8151.63 H-FiledStrengthat20cmfromthetopoftheEUT(A/m) UnitTestmode TM1 Test PositionE 50%Limits (A/m) Limits (A/m) TM1 A/mPhoneport0.2010.8151.63 Note:Alltestmodeswerepre-tested,butweonlyrecordedtheworstcaseinthisreport. N o. EquipmentManufacturerModelNo.SerialNo.Powercordsignalcable 1 Wireless charger receiver SLY15WN/A N/AN/A 2Adapter Shenzhen Yiboyuan Electronic Co.,LTD QC95 N/AN/AN/A Page 4 of 6 FCCID:YJW-10652PG 9TestSetupphoto TestPositionA-15cmfromtheedgeofEUTtothegeometriccenteroftheprobe TestPositionB-15cmfromtheedgeofEUTtothegeometriccenteroftheprobe Page 5 of 6 FCCID:YJW-10652PG TestPositionC-15cmfromtheedgeofEUTtothegeometriccenteroftheprobe TestPositionD-15cmfromtheedgeofEUTtothegeometriccenteroftheprobe Page 6 of 6 FCCID:YJW-10652PG TestPositionE-15cmfromtheedgeofEUTtothegeometriccenteroftheprobe TestPositionE-20cmfromtheedgeofEUTtothegeometriccenteroftheprobe ***Endofreport***

Page1of23ReportNo.:AIT23101703FW1 DongguanYaxu(AiT)TechnologyLimited No.22,JinqianlingThirdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. FCCTESTREPORT ClientInformation: Applicant:SuperiorCommunications. Applicantadd.:5027IrwindaleAve.SuiteIrwindaleAveCaliforniaUnitedStates. Manufacturer:ShenzhenPowerqiTechnologyCo.,Ltd. Manufactureradd.: Room201,302,401ofA4Building,BlockA,FangxingScienceand TechnologyPark,No.13ofBaonanRoad,LonggangDistrict,Shenzhen, China ProductInformation: ProductName:15WWirelessChargingPad ModelNo.:10652PG-VN,10652PG,10651PG,10651PG-VN BrandName:PUREGEAR FCCID:YJW-10652PG Applicablestandards:FCCCFRTitle47Part15SubpartC PreparedBy: DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang,Huangjiang,Dongguan, Guangdong,China Tel.:+86-769-82020499Fax.:+86-769-82020495 DateofReceipt:Oct.17,2023DateofTest:Oct.17,2023~Oct.25,2023 DateofIssue:Oct.26,2023TestResult:Pass ThisdevicedescribedabovehasbeentestedbyDongguanYaxu(AiT)TechnologyLimitedandthe testresultsshowthattheequipmentundertest(EUT)isincompliancewiththeFCCrequirements. Anditisapplicableonlytothetestedsampleidentifiedinthereport. Note:Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofDongguan Yaxu(AiT)TechnologyLimited,thisdocumentmaybealteredorrevisedbyDongguanYaxu(AiT) TechnologyLimited,personalonly,andshallbenotedintherevisionofthedocument.Thistest reportmustnotbeusedbytheclienttoclaimproductendorsement. Reviewedby:Approvedby: SimbaHuangSeal.chen Page2of23ReportNo.:AIT23101703FW1 DongguanYaxu(AiT)TechnologyLimited No.22,JinqianlingThirdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. 1Contents Page COVERPAGE 1CONTENTS............................................................................................................................................................2 2TESTSUMMARY...................................................................................................................................................5 2.1STATEMENTOFTHEMEASUREMENTUNCERTAINTY.............................................................................................5 2.2MEASUREMENTUNCERTAINTY............................................................................................................................5 3TESTFACILITY.....................................................................................................................................................6 3.1DEVIATIONFROMSTANDARD..............................................................................................................................6 3.2ABNORMALITIESFROMSTANDARDCONDITIONS...................................................................................................6 3.3TESTLOCATION.................................................................................................................................................6 4GENERALINFORMATION...................................................................................................................................7 4.1EUTTESTMODE...............................................................................................................................................8 4.2DESCRIPTIONOFTESTSETUP............................................................................................................................8 4.3PERIPHERALLIST...............................................................................................................................................9 4.4EUTPERIPHERALLIST......................................................................................................................................9 5EQUIPMENTSLISTFORALLTESTITEMS......................................................................................................10 6CONDUCTEDEMISSIONTEST.........................................................................................................................11 6.1CONDUCTEDEMISSIONMEASUREMENT................................................................................................11 6.2POWERLINECONDUCTEDEMISSIONLIMITS..........................................................................................11 6.3TESTPROCEDURE......................................................................................................................................11 6.4DEVIATIONFROMTESTSTANDARD........................................................................................................11 6.5TESTSETUP.................................................................................................................................................12 6.6EUTOPERATINGCONDITIONS..................................................................................................................12 6.7TESTRESULT..................................................................................................................................................13 7RADIATEDEMISSIONMEASUREMENT...........................................................................................................15 7.1RADIATEDEMISSIONLIMITS.............................................................................................................................15 7.2ANECHOICCHAMBERTESTSETUPDIAGRAM....................................................................................................16 7.3TESTPROCEDURE...........................................................................................................................................16 7.4DEVIATIONFROMTESTSTANDARD........................................................................................................16 7.5TESTRESULT..................................................................................................................................................17 8BANDWIDTHTEST.............................................................................................................................................20 …

Text truncated - open the document above for the full version.

Page1of2FCCID: YJW-10652PG DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. TestSetupPhoto RadiatedEmission Page2of2FCCID: YJW-10652PG DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. ConductedEmission ------End------