YZP-RBHAT223AWi-Fi + BT Combo module

TITLE : Specifications for approval (RBHA-T223A) (CUSTOMER P/NO : ) REV 0.1 (4/ 39) R E V APPDCHKDDSGD DOCUMENT NO. RBHA-T223A LG Innotek Co., Ltd (30) -4021 1. Application This specification is applied to LG Innotek Bluetooth v4.1 and WLAN(IEEE 802.11.b/g/n) Module RBHA-T223A which includes WL1833Q. 2. Quality Quality should meet each condition which mentioned on this specification. However, the items which are not mentioned on this specification follow the inspection agreements and standards which are agree with both companies. 3. Appearance and Characteristics 1) Appearance Appearance should not contaminated by harmful materials and should not have cracks etc. Mechanical dimensions should meet the contents of clause 8. 2) Characteristics Electrical characteristics should meet the contents of clause 10. 4. Application of Bluetooth v4.1 and WLAN(IEEE 802.11 b/g/n) module 1) Automotive 5. Maximum Rating NoItemRatingUnit 1Operating Temperature Range-40 ~ +85°C 2Storage Temperature Range-40 ~ +105°C 3VBAT_3V3 Voltage Range3.1~ 3.6V 4VIO_1V8Voltage Range1.62 ~1.95V TITLE : Specifications for approval (RBHA-T223A) (CUSTOMER P/NO : ) REV 0.1 (5/ 39) R E V APPDCHKDDSGD DOCUMENT NO. RBHA-T223A LG Innotek Co., Ltd (30) -4021 6. Test Electrical characteristics are tested for every products. However, if there are any objection in judgments, it should be treated with agreements of companies. 7. Labeling Information No.Index ①PRODUCT NAME ②MODEL PART NO. ③COMPANY ④MANUFACTURED YEAR (0~9) ⑤MANUFACTURED MONTH(1,2, ...9, A,B,C) ⑥MANUFACTURED DATE (1~31) ⑦ Manufactured Serial Number : SMT Line no ⑧ Manufactured Serial Number : Shift no(A,B,C) ⑨ Manufactured Serial Number : (001~999) ⑩ FCC ID ⑪ CE Logo ⑫ Certification Number ② ④⑤ ① ③ ⑥ ⑦ ⑧ RBHA-T223A LGIT x x xx xxxxx VESPUCCI RBHA-T223A LG 5521 1A 001 FCC ID:YZP-RBHAT223A 0678 VESPUCCI FCCID:YZP-RBHAT223A ⑨ ⑩ ⑪⑫ 0678 TITLE : Specifications for approval (RBHA-T223A) (CUSTOMER P/NO : ) REV 0.1 (6/ 39) R E V APPDCHKDDSGD DOCUMENT NO. RBHA-T223A LG Innotek Co., Ltd (30) -4021 8. Mechanical Dimension L W a1 a2 a5 b3 a3 c1 c2 c3 b2 a4 b1 MarkDimensionMarkDimensionMarkDimensionMarkDimensionMarkDimension W21.2 ± 0.2L22 ± 0.2a11.2 ± 0.1a20.6 ± 0.1a31.2 ± 0.1 a41.15 ± 0.1a50.15 ± 0.1b11.2 ± 0.1b22.75 ± 0.1b31.2 ± 0.1 c14.85 ± 0.1c24.85 ± 0.1c30.3 ± 0.1T2.9 MaxC0.08 Max Unit : mm TITLE : Specifications for approval (RBHA-T223A) (CUSTOMER P/NO : ) REV 0.1 (7/ 39) R E V APPDCHKDDSGD DOCUMENT NO. RBHA-T223A LG Innotek Co., Ltd (30) -4021 9. General Features 1)Module Features • Intended for Automotive infotainment applications (-40°Cto +85°C) • Operating Voltage is 3.3V Power Rail and 1.8V IO Level • WLAN, BT, BLE on a single chip provides a unique scalable platform catering to all connectivity needs in vehicle infotainment • Shared HCI transport for BT/BLE over UART and SDIO for WLAN. • Automotive Module. -. WL1833Q : AEC-Q100 Qualified -. Diplexer / TCXO : AEC-Q200 Qualified • BT 4.0 BLE and all audio processing features work in parallel • Support 1-Antenna (BT and WLAN 2.4GHz) • Integrated Bluetooth RF Filter. • RoHS Compliant 2) Package information • Module package is QFN (Quad Flat No-Lead) type . Notice) If the module attached to the set board is flipped during the reflow process, shieldcase of the module may detach or fall apart. 3) JEDEC MSL (Moisture Sensitivity Level) Test • MSL 3 Level (Floor Life Time : 168Hrs. / Condition : ≤30°C, 60% RH) • Standard : IPC / JEDEC J-STD-020C 9.1 BT(v4.1) + WLAN(IEEE 802.11 b/g/n) Module Bake Soak Reflow 24Hrs. / 125°C 40Hrs. / 60°C, 60% RH 3 times / 240°C TITLE : Specifications for approval (RBHA-T223A) (CUSTOMER P/NO : ) REV 0.1 (8/ 39) R E V APPDCHKDDSGD DOCUMENT NO. RBHA-T223A LG Innotek Co., Ltd (30) -4021 9. General Features 1)Bluetooth Features • Bluetooth Power Class 2 • Support Bluetooth 4.1 BLE • Includes concurrent operation and built-in coexisting prioritization handling of BT,BLE, ANT audio processing and WLAN • Embedded Fully Bluetooth v4.1(BLE) System Compliant • Dedicated Audio processor supporting on chip SBC encoding +A2DP; -Assisted A2DP(A3DP) support-SBC encoding implemented internally -Assisted WB-Speech(AWBS) support-modified SBC codec implemented internally • Support High-speed UART up to 4Mbps 2) BLE Features • Fully compliant with BT 4.1 BLE dual mode standard • Support for all roles and role-combinations, mandatory as well as optional • Supports up to 10 BLE connections • Independent buffering for LE allows having large number of multiple connections without affecting BR/EDR performance • Packet boundary flags • Encryption • Extended inquiry response 9.2 Bluetooth TITLE : Specifications for approval (RBHA-T223A) (CUSTOMER P/NO : ) REV 0.1 (9 / 39) R E V APPDCHKDDSGD DOCUMENT NO. RBHA-T223A LG Innotek Co., Ltd (30) - 4021 9. General Features 1) WLAN Features • Support for IEEE 802.11b/g/n • Support for IEEE 802.11n(20/40MHz) partial streams 2.4GHz • WLAN MAC Baseband Processor and RF transceiver • Supports 4bits SDIO host interface , including high speed (HS) and V3 modes • Medium Access Controller (MAC) – Hardware-Based Encryption/Decryption using 64-, 128 -, and 256-Bit WEP, TKIP or AES Keys, – Supports requirements for Wi-Fi Protected Access (WPA and WPA2.0) and IEEE Std 802.11i [includes hardware-accelerated Advanced Encryption Standard (AES)] – Designed to work with IEEE Std 802.1x • IEEE Std 802.11d,e,h,i,k,r PICS compliant • Supports Concurrent operation in multiple networks • Client of AP, AP, Wi-Fi Direct 9.3 WLAN 2) Functionality Key Features : Encryption • Hardware encryption according to IEEE 802.11-2007 and IEEE 802.11w-2009: • WEP40/64 • WEP104/128 • CCMP (AES) • TKIP • BIP • Hardware encryption support for Cisco® CKIP TITLE : Specifications for approval (RBHA-T223A) (CUSTOMER P/NO : ) REV 0.1 (26 / 39) R E V APPDCHKDDSGD DOCUMENT NO. RBHA-T223A LG Innotek Co., Ltd (30) - 4021 11. Pin Configuration <Top Through View> NoPin NameDescription 1GNDGround 2GPIO4GPIO4 3UART_DBG_WLWLAN logger …

Text truncated - open the document above for the full version.

To whom it may concern: We, LG Innotek Co., Ltd., as a manufacturer of product mentioned above hereby this module will be marketed/installed with following conditions. The module cannot be sold retail but be sold to manufacturers. Installation must be done by precisely engineered process. Installation must be done by rules o f guideline from module manufacturer. This module is generally for industry and commercial use. &   /?  November30 5           !  "   #  $$ UL Verification Services Inc.  (  &   )*+& Jeong Inchang Senior Research Engineer LG Innotek Co., Ltd. LG Innotek Co., Ltd. 978-1, Jangduk-dong, Gwangsan-gu Gwangju, 506-731, Korea Attestation Letter for FCC ID: YZP-RBHAT223A

To whom it may concern: We, LG Innotek Co., Ltd., apply to Country Region Code index from EEPROM for use channel 1 ~ 11 only. The Country Region Code index can’t change easily by user, because this index is recorded at EEPROM. So, our device only supports from channel 1 to channel 11. Other channels are disabled when placing to USA. &   /?  November30 5           !  "   #  $$ UL Verification Services Inc.  (  &   )*+& Jeong Inchang Senior Research Engineer LG Innotek Co., Ltd. LG Innotek Co., Ltd. 978-1, Jangduk-dong, Gwangsan-gu Gwangju, 506-731, Korea Attestation Letter for FCC ID: YZP-RBHAT223A

November26 5           !  "   #  $$ UL Verification Services Inc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nnotek Co., Ltd. 978-1, Jangduk-dong, Gwangsan-gu Gwangju, 506-731, Korea %7   %   /  .    % " 1 %  / - .  %  <  17 '  .  %      /  . %      1 <  .7  ./ %     %       ." .  '   1 - .. 9 % .  %   '  <  7 keep a record of all complaints made known to the us relating to the product’s  - . 9 %.  ' .   ' " .  %   '  -. 9< :7    - .  .  /%    %    ' .%% - .. 9 %    %  < 7 . $ ,. . 2  '  % . -  % . $ &   /?  Jeong Inchang Senior Research Engineer LG Innotek Co., Ltd.

To whom it may concern: This letter is to comply with Section 0.457(d)(2)(i) and 0.459 pertaining to confidential material. We, LG Innotek Co., Ltd. requests confidentiality and treatmet of certain information accompanying this application for FCC ID: YZP-RBHAT223A to be kept co nfidential. The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. CONFIDENTIAL LIST Permanent 1 Block Diagram 2 Operational Descriptions 3 Schematics Short‐Term 4 External Photos 5 Internal Photos 6 Test‐Setup Photos 7 User’s Manual &   /?  November26 5           !  "   #  $$ UL Verification Services Inc.  (  &   )*+& Jeong Inchang Senior Research Engineer LG Innotek Co., Ltd. LG Innotek Co., Ltd. 978-1, Jangduk-dong, Gwangsan-gu Gwangju, 506-731, Korea

Modular Approval Attestation Applicant/Grantee LG Innotek Co., Ltd. FCC ID: YZP-RBHAT223A Modular Transmitters Request for Modular Approval Request for Limited Modular Approval Requirements EUT Conditions Comply (Y/N) Single Modular Approval Requirements 1 The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. Y 2 The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with modular approval requirements under conditions of excessive data rates or over-modulation. Y 3 The modular transmitter must have its own power supply regulation. Y 4 The modular transmitter must comply with the antenna and transmission system requirements. Y 5 The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see Section 15.31(i)). Y 6 The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. (A) If using a permanently affixed label, the modular transmitter must be labeled with its own FCC identification number, and, if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a Y label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. (B) If the modular transmitter uses an electronic display of the FCC identification number, the information must be readily accessible and visible on the modular transmitter or on the device in which it is installed. If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains FCC certified transmitter module(s).” Any similar wording that expresses the same meaning may be used. The user manual must include instructions on how to access the electronic display. A copy of these instructions must be included in the application for equipment authorization. 7 The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. Y 8 The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. Y A limited modular approval may be granted for single or split modular transmitters that do not comply with all of the above requirements, e.g., shielding, minimum signaling amplitude, buffered modulation/data inputs, or power supply regulation, if the manufacturer can demonstrate by alternative means in the application for equipment authorization that the modular transmitter meets all the applicable Limited modular approval also may be granted in those instances where compliance with RF exposure rules is demonstrated only for particular product configurations. The applicant for certification must state how control of the end product into which the module will be installed will be maintained such that full compliance of the end product is always ensured. Name and Title of the Applicant: Jeong Inchang / Senior Research Engineer LG Innotek Co., Ltd. Signature: Date: 2015.11.26

Model : RBHA-T223A External photos of EUT Model : RBHA-T223A Top view of EUT Test zig EUT Model : RBHA-T223A Top view of EUT Bottom view of EUT

Model: RBHA-T223A FCC ID: YZP-RBHAT223A Label Format & Location Model: RBHA-T223A FCC ID: YZP-RBHAT223A Top view of EUT

Model : RBHA-T223A Internal photos of EUT Model : RBHA-T223A Top view of EUT Model : RBHA-T223A Top view PCB Antenna Antenna

Report Number:F690501/RF-RTL009285-1Page:2of6 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory)4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 http://www.sgsgroup.kr RTT5041-20(2015.10.01)(3)Tel. +82 31 428 5700 / Fax. +82 31 427 2370 A4(210 mmx297 mm) INDEX Table of ContentsPage 1. General Information --------------------------------------------------------------------------------3 2. RF Exposure Evaluation --------------------------------------------------------------------------5 Report Number:F690501/RF-RTL009285-1Page:3of6 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory)4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 http://www.sgsgroup.kr RTT5041-20(2015.10.01)(3)Tel. +82 31 428 5700 / Fax. +82 31 427 2370 A4(210 mmx297 mm) 1. General Information 1.1. Testing Laboratory SGS Korea Co., Ltd. (Gunpo Laboratory) - Wireless Div. 2FL, 10-2, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 All SGS services are rendered in accordance with the applicable SGS conditions of service available on request and accessible athttp://www.sgs.com/en/Terms-and-Conditions.aspx. Telephone:+82 31 688 0901 FAX:+82 31 688 0921 1.2. Details of applicant Applicant:LG INNOTEK CO., LTD. Address:26, Hanamsandan 5beon-ro, Gwangsan-gu, Gwangju, 62229, Korea Contact Person:Jeong, In-Chang Phone No.:+82 10 2326 9972 1.3. Description of EUT Kind of Product Wi-Fi + BT Combo module Model Name RBHA-T223A Power Supply DC 3.3 V Frequency Range 2 402㎒~ 2 480㎒(Bluetooth, Bluetooth Low Energy), 2 412㎒~ 2 462㎒(11b/g/n_HT20), 2 422㎒~ 2 452㎒(11n_HT40) Modulation Technique DSSS, OFDM, GFSK, π/4DQPSK, 8DPSK Number of Channels 79 channel (Bluetooth), 40 channel (Bluetooth Low Energy), 11 channel (11b/g/n_HT20), 7 cahnnel (11n_HT40) Operation Temperature -40°C~ 85°C Antenna Type Dipole Antenna Antenna Gain 1.82㏈i Report Number:F690501/RF-RTL009285-1Page:4of6 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory)4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 http://www.sgsgroup.kr RTT5041-20(2015.10.01)(3)Tel. +82 31 428 5700 / Fax. +82 31 427 2370 A4(210 mmx297 mm) 1.4. Test report revision RevisionReport numberDate of IssueDescription 0F690501/RF-RTL0092852015.11.25Initial 1F690501/RF-RTL009285-12015.11.30Modified applicant address 1.5. Declaration by the manufacturer - WLAN & BT do not transmit simultaneously. Report Number:F690501/RF-RTL009285-1Page:5of6 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory)4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 http://www.sgsgroup.kr RTT5041-20(2015.10.01)(3)Tel. +82 31 428 5700 / Fax. +82 31 427 2370 A4(210 mmx297 mm) 2. RF Exposure Evaluation 2.1. Environmental evaluation and exposure limit according to FCC CFR 47 part 1, 1.1307(b), 1.1310 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) 2.1.1. Friis transmission formula: Pd = (Pout*G)/(4*pi*R 2 ) Where Pd = power density in㎽/㎠ Pout = output power to antenna in㎽ G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in㎝ Pd the limit of MPE, 1㎽/㎠. If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Frequency Range (㎒) Electric Field Strength(V/m) Magnetic Field Strength (A/m) Power Density (㎽/㎠) Average Time (A) Limits for Occupational/Controlled Exposure 0.3 – 3.06141.63*1006 3.0 – 301842/f4.89/f*900/f 2 6 30 - 30061.40.1631.06 300 – 1 500--f/3006 1 500 – 100 000--56 (B) Limits for General Population/Uncontrolled Exposure 0.3 – 1.346141.63*10030 1.34 – 30824/f2.19/f*180/f 2 30 30 - 30027.50.0730.230 300 – 1 500--f/150030 1 500 – 100 000 -- 1.030 Report Number:F690501/RF-RTL009285-1Page:6of6 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory)4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 http://www.sgsgroup.kr RTT5041-20(2015.10.01)(3)Tel. +82 31 428 5700 / Fax. +82 31 427 2370 A4(210 mmx297 mm) 2.1.2. Test Result of RF Exposure Evaluation Test Item：RF Exposure Evaluation Data Test Mode：Normal Operation 2.1.3.Output Power into Antenna & RF Exposure Evaluation Distance BT - Maximum tune up tolerance Operating Frequency Range (㎒) MaximumAverageOutput Power to Antenna (㏈m) Antenna Gain (㏈i) Power Density at 20㎝(㎽/㎠) Limits (㎽/㎠) 2 402 ~ 2 48041.820.000 7601 BT LE - Maximum tune up tolerance Operating Frequency Range (㎒) MaximumAverageOutput Power to Antenna (㏈m) Antenna Gain (㏈i) Power Density at 20㎝(㎽/㎠) Limits (㎽/㎠) 2 402 ~ 2 480111.820.003 8081 WLAN (2.4G) - Maximum tune up tolerance Operating Frequency Range (㎒) Maximum AverageOutput Power to Antenna (㏈m) Antenna Gain (㏈i) Power Density at 20㎝(㎽/㎠) Limits (㎽/㎠) 2 412 ~ 2 462191.820.024 0291 Note : 1. The power density Pd (5th column) at a distance of 20㎝calculated from the friis transmission formula is far below the limit of 1㎽/㎠.

Report Number:F690501/RF-RTL009283-1Page:2of65 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory)4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 http://www.sgsgroup.kr RTT5041-20(2015.10.01)(3)Tel. +82 31 428 5700 / Fax. +82 31 427 2370 A4(210 mmx297 mm) INDEX Table of ContentsPage 1. General Information ---------------------------------------------------------------------------------3 2. Transmitter Radiated Spurious Emissions and Conducted Spurious Emission ------7 3. 20㏈Bandwidth-------------------------------------------------------------------------------------- 31 4. Maximum Peak Output Power -------------------------------------------------------------------38 5. Carrier Frequency Separation --------------------------------------------------------------------40 6. Number of Hopping Frequency ------------------------------------------------------------------43 7. Time of Occupancy(Dwell Time) -----------------------------------------------------------------47 8. Transmitter AC Power Line Conducted Emission -------------------------------------------60 9. Antenna Requirement ------------------------------------------------------------------------------65 Report Number:F690501/RF-RTL009283-1Page:3of65 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory)4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 http://www.sgsgroup.kr RTT5041-20(2015.10.01)(3)Tel. +82 31 428 5700 / Fax. +82 31 427 2370 A4(210 mmx297 mm) 1. General Information 1.1. Testing Laboratory SGS Korea Co., Ltd. (Gunpo Laboratory) - Wireless Div. 2FL, 10-2, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 All SGS services are rendered in accordance with the applicable SGS conditions of service available on request and accessible athttp://www.sgs.com/en/Terms-and-Conditions.aspx. Telephone:+82 31 688 0901 FAX:+82 31 688 0921 1.2. Details of Applicant Applicant:LG INNOTEK CO., LTD. Address:26, Hanamsandan 5beon-ro, Gwangsan-gu, Gwangju, 62229, Korea Contact Person:Jeong, In-Chang Phone No.:+82 10 2326 9972 1.3. Description of EUT Kind of Product Wi-Fi + BT Combo module Model Name RBHA-T223A Power Supply DC 3.3 V Frequency Range 2 402㎒~ 2 480㎒(Bluetooth, Bluetooth Low Energy), 2 412㎒~ 2 462㎒(11b/g/n_HT20), 2 422㎒~ 2 452㎒(11n_HT40) Modulation Technique DSSS, OFDM, GFSK, π/4DQPSK, 8DPSK Number of Channels 79 channel (Bluetooth), 40 channel (Bluetooth Low Energy), 11 channel (11b/g/n_HT20), 7 cahnnel (11n_HT40) Operation Temperature -40°C~ 85°C Antenna Type Dipole Antenna Antenna Gain 1.82㏈i 1.4. Declaration by the manufacturer - Adaptive Frequency Hopping is supported and use at least 20 channels - WLAN & BT do not transmit simultaneously. Report Number:F690501/RF-RTL009283-1Page:4of65 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory)4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 http://www.sgsgroup.kr RTT5041-20(2015.10.01)(3)Tel. +82 31 428 5700 / Fax. +82 31 427 2370 A4(210 mmx297 mm) 1.5. Information about the FHSS characteristics: 1.5.1. Pseudorandom Frequency Hopping Sequence The channel is represented by a pseudo-random hopping sequence hopping through the 79 RF channels. The hopping sequence is unique for the piconet and is determined by the Bluetooth device address of the master; the phase in the hopping sequence is determined by the Bluetooth clock of the master. The channel is divided into time slots where each slot corresponds to an RF hop frequency. Consecutive hops correspond to different RF hop frequencies. The nominal hop rate is 1 600 hops/s. 1.5.2. Equal Hopping Frequency Use The channels of this system will be used equally over the long-term distribution of the hopsets. 1.5.3. Example of a 79 hopping sequence in data mode: 02, 05, 31, 24, 20, 10, 43, 36, 30, 23, 40, 06, 21, 50, 44, 09, 71, 78, 01, 13, 73, 07, 70, 72, 35, 62, 42, 11, 41, 08, 16, 29, 60, 15, 34, 61, 58, 04, 67, 12, 22, 53, 57, 18, 27, 76, 39, 32, 17, 77, 52, 33, 56, 46, 37, 47, 64, 49, 45, 38, 69, 14, 51, 26, 79, 19, 28, 65, 75, 54, 48, 03, 25, 66, 05, 16, 68, 74, 59, 63, 55 1.5.4. System Receiver Input Bandwidth Each channel bandwidth is 1㎒. The system receivers have input bandwidths that match the hopping channel bandwidths of their corresponding transmitters and shift frequencies in synchronization with the transmitted signals. 1.5.5. Equipment Description 15.247(a)(1) that the rx input bandwidths shift frequencies in synchronization with the transmitted signals. 15.247(g): In accordance with the Bluetooth Industry Standard, the system is designed to comply with all of the regulations in Section 15.247 when the transmitter is presented with a continuous data (or information) system. 15.247(h): In accordance with the Bluetooth Industry Standard, the system does not coordinate it channels selection/ hopping sequence with other frequency hopping systems for the express purpose of avoiding the simultaneous occupancy of individual hopping frequencies by multiple transmitters. Report Number:F690501/RF-RTL009283-1Page:5of65 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory)4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 http://www.sgsgroup.kr RTT5041-20(2015.10.01)(3)Tel. +82 31 428 5700 / Fax. +82 31 427 2370 A4(210 mmx297 mm) 1.6. Test Equipment List Equip…

Text truncated - open the document above for the full version.

Model : RBHA-T223A Test setup photo of EUT Model : RBHA-T223A A. Orthogonal planes of EUT - The testing was set in the three orthogonal planes and measured for each position (X, Y, Z). 1. X- axis 2. Y-axis Model : RBHA-T223A 3. Z-axis Model : RBHA-T223A B. Photo of Radiated Spurious Emission Test (Below 1 ㎓) Model : RBHA-T223A C. Photo of Radiated Spurious Emission Test (Above 1 ㎓) Model : RBHA-T223A D. Photo of AC Power Line Conducted Emission (WLAN & BT LE) Model : RBHA-T223A E. Photo of AC Power Line Conducted Emission (BT)