Z3K-X20674012AHDMI Tablet Combo (RSE)

◊≤≠ ̈Æ ́Ω ̈∑±≤ ”ø≤ ́ø¥ »Û–ƪ≥∑ ́≥ –Ʊ∫ª≠≠∑±≤ø¥ fl ́ ̈±≥± ̈∑™ª ŒªøÆ Õªø ̈ ¤≤ ̈ªÆ ̈ø∑≤≥ª≤ ̈ Õß≠ ̈ª≥ EN-2 X-Premium Instruction Manual Regulatory Statements FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. FCC ID: Z3K-X20674012A should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. EN-3 X-Premium Instruction Manual IC Caution: English: Operation is subject to the following two conditions: (1)This device may not cause interference, and (2)This device must accept any interference, including interference that may cause undesired operation of the device. French: (1)l’appareil ne doit pas produire de brouillage, et (2)l’utilisateur de l’appareil doit accepter tout brouillage radioélectriqu e subi, même si le brouillage est susceptible d’encompromettre le fonctionnement. CE Compliance Statement 1) Use only power s upplies list ed in the user inst ruct ions. Adapter Model(s): TEKA024-1202000UK or T EKA024-1202000EU, Made By: SHENZHEN TEKA TECHNOLOGY CO., LTD 2) WARNING: Do not ingest the battery, Chemical Burn Hazard internal burns in just 2 hours and can lead to death. K eep new and used batteries away from c hildren. If the battery compartment does not close securely, s top using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical a ttention. 3) To prevent poss ible hearing damage, do not listen at high volume levels for long periods. should be installed and operated w ith minimum distance between 20cm the radiator y our body: Use only the supplied antenna. ISED EN-4 X-Premium Instruction Manual RED protection. GMS Google, Android, Google Play, Youtube and other marks are trademarks of Google LLC. WEEE Compliance Statement This symbol on the product or on the packaging indicates that this can not be disposed of as household waste. You must dispose of your battery. For more information please contact your local household EN-5 X-Premium Instruction Manual Safety Instructions Read through this manual carefully and observe the following safety instructions before operating this device. Use only the car power cable and accessories supplied by dealer. Use of unauthorized accessories may void the warranty. Do not install near any heat sources such as radiators, heat registers, stoves, Keep this device away from water, drinks, or all types of liquids. Disconnect this device from the power supply when not in use. It is forbidden by law to duplicate, broadcast, play in public, or rent copyrighted material without permission. Do not use alcohol based products to clean your device. Clean only with dry cloth. Always disconnect this device from the power source before cleaning. Refer all servicing to authorized repair centres only. Do not attempt to repair this device yourself. Doing so may result in electric shock and will void the warranty. Keep this manual in a convenient place for future reference. SPECIAL NOTE REGARDING USE OF THIS DEVICE IN A VEHICLE We strongly advise against the driver of a vehicle using this device, whilst moving. Most countries and states have laws which prohibit or severely restrict the use of this device in vehicles while driving, where the driver can see the screen. Please adhere to these laws. inside the passenger cabin or trunk in midsummer. Always switch the engine on before connecting power via the car power cable. Always disconnect the power from this device before switching off the engine. EN-6 X-Premium Instruction Manual Contents ........................................................................................8 Package Contents ...........................................................................................9 ....................................................................................9 X-Premium (X1+X2) ................................................................................10 ...................................................................................11 Media Support List ........................................................................................13 USB Format: ............................................................................................13 ............................................................................................13 Product Overview ..........................................................................................14 Player .......................................................................................................14 Stanchion Mount ..............................................…

Text truncated - open the document above for the full version.

Family models declaration letter. 2020-03-10 We Company: JET OPTOELECTRONICS CO.,LTD. Address: 3F.,No.300,Yangguang St.Neihu Dist.,Taipei City 11491 Taiwan. Product: HDMI Tablet Combo (RSE) Model Name: X2 Family Model: X2+X2 All models are the same circuit and RF module, except the model name. Thanks Sincerely, Signature 2020-03-10 Name: CHI OWEN Title: Manager

Letter of Authorization Company: JET OPTOELECTRONICS CO.,LTD. Address: 3F.,No.300,Yangguang St.Neihu Dist.,Taipei City 11491 Taiwan. Product Name: HDMI Tablet Combo (RSE) Model Number: X2, X2+X2 FCC Identifier: Z3K-X20674012A We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: CHI OWEN Date: Mar. 10.2020 Title: Manager Signature of applicant:

JET OPTOELECTRONICS CO.,LTD. Date: Mar 10, 2020 FCC ID: Z3K-X20674012A Model Number: X2, X2+X2 To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, JET Optoelectronics Co.,Ltd. , declare that this EUT (FCC ID: Z3K-X20674012A) will conduct FCC compliance testing, the SDOC part recognized test lab(Shenzhen NTEK Testing Technology Co., Ltd.( ShenZhen Lab.). 1/F, Building E, Fenda Science Park, Sanwei Community,Xixiang Street Bao’an District, Shenzhen 518126 P.R. China) Please contact me if you have any question. Sincerely, (Signed) Name / Title: CHI OWEN/ Manager Company: JET OPTOELECTRONICS CO.,LTD. Address: 3F.,No.300,Yangguang St.Neihu Dist.,Taipei City 11491 Taiwan.

S19032701506 Model: X2 N20190309V1 ATTACHMENT PHOTOGRAPHS OF EUT Photo 1 Photo 2 S19032701506 Model: X2 N20190309V1 Photo 3 Photo 4 S19032701506 Model: X2 N20190309V1 Photo 5 Photo 6 S19032701506 Model: X2 N20190309V1 Photo 7 Photo 8 S19032701506 Model: X2 N20190309V1 Photo 9 Photo 10 S19032701506 Model: X2 N20190309V1 Photo 11 Photo 12 S19032701506 Model: X2 N20190309V1 Photo 13

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation. X2 FCC ID :Z3K-X20674012A IC: 9930A-X20674012A VOL+VOL- Earphone This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation. X2+X2 FCC ID :Z3K-X20674012A IC: 9930A-X20674012A VOL+VOL- Earphone

S19032701506 Model: X2 N20190309V1 ATTACHMENT PHOTOGRAPHS OF EUT Photo 1 Photo 2 S19032701506 Model: X2 N20190309V1 Photo 3 Photo 4 S19032701506 Model: X2 N20190309V1 Photo 5 Photo 6 S19032701506 Model: X2 N20190309V1 Photo 7 Photo 8 S19032701506 Model: X2 N20190309V1 Photo 9 Photo 10 S19032701506 Model: X2 N20190309V1 Photo 11 Photo 12 BT/WIFI2. 4G/WIFI5G ANT

FCC ID: Z3K-X20674012A Maximum Permissible Exposure (MPE) According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency(RF) Radiation as specified in §1.1307(b) Limits for Maximum Permissible Exposure (MPE) MPE Calculation Method E (V/m) ＝ d GP**30 Power Density: Pd (W/m²) ＝ 377 2 E E ＝ Electric field (V/m) P ＝ Average RF output power (W) G ＝ EUT Antenna numeric gain (numeric) d ＝ Separation distance between radiator and human body (m) The formula can be changed to Pd ＝ 2 *377 **30 D GP From the EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. Measurement Result BT: Operation Frequency: 2402MHz~2480MHz Power density limited: 1mW/ cm 2 Antenna Type: PIFA antenna WIFI antenna gain: 2.0dBi; R=20cm mW=10^(dBm/10) antenna gain Numeric=10^(dBi/10)= 10^(1/10)=1.58 2.4G WIFI: Operation Frequency: WIFI 802.11b/g/n HT20: 2412-2462MHz, WIFI 802.11n HT40:2422-2452MHz Power density limited: 1mW/ cm 2 Antenna Type: PIFA Antenna WIFI antenna gain: 2.0dBi; R=20cm mW=10^(dBm/10) antenna gain Numeric=10^(dBi/10)= 10^(1/10)=1.58 conducted power Tune-up power Antenna Evaluation result at 20cm Power density Limits Gain (dBm)(mW)Numeric 24025.7956±175.0118721.580.001581 24416.4186±175.0118721.580.001581 24806.3846±175.0118721.580.001581 24024.8955±163.9810721.580.001251 24415.3885±163.9810721.580.001251 24805.4255±163.9810721.580.001251 24025.0385±163.9810721.580.001251 24415.5475±163.9810721.580.001251 24805.5465±163.9810721.580.001251 24025.7356±175.0118721.580.001581 24416.3116±175.0118721.580.001581 24806.2896±175.0118721.580.001581 (mW/cm2) (dBm) π/4- DQPSK, 8DPSK Max tune-up power Channel Freq. (MHz) modulation (dBm) GFSK BLE(GFSK ) Power density(mW/cm 2 ) conducted power Tune-up power Antenna Evaluation result at 20cm Power density Limits Gain (dBm)(mW)Numeric 241212.6913±11425.118861.580.007901 243713.0113±11425.118861.580.007901 246212.8113±11425.118861.580.007901 241211.7612.7±113.723.442291.580.007371 243713.5312.7±113.723.442291.580.007371 246213.6912.7±113.723.442291.580.007371 241211.6411±11215.848931.580.004981 243713.613±11425.118861.580.007901 246213.7613±11425.118861.580.007901 242212.9613±11425.118861.580.007901 243713.1913±11425.118861.580.007901 245213.3313±11425.118861.580.007901 Channel Freq. (MHz) modulation (dBm) 802.11b 802.11n H40 Power density(mW/cm 2 ) (mW/cm2) (dBm) 802.11g 802.11n H20 Max tune-up power 5G WIFI: Operation Frequency: WIFI 802.11a/n(HT20): 5180-5240MHz;5260-5320MHz,5500- 5700MHz,5745-5825MHz WIFI 802.11n(HT40): 5190-5230MHz;5270-5310MHz,5510- 5670MHz5755-5795MHz Power density limited: 1mW/ cm Antenna Type: PIFA Antenna WIFI antenna gain: 2.0dBi; R=20cm mW=10^(dBm/10) antenna gain Numeric=10^(dBi/10)= 10^(1/10)=1.58 5.2G 5.3G 5.6G conducted power Tune-up power Antenna Evaluation result at 20cm Power density Limits Gain (dBm)(mW)Numeric 518012.3112±11319.952621.580.006271 520012.2112±11319.952621.580.006271 524012.4612±11319.952621.580.006271 518011.9812±11319.952621.580.006271 520012.3412±11319.952621.580.006271 524012.6812±11319.952621.580.006271 519012.2912±11319.952621.580.006271 523012.7912±11319.952621.580.006271 (mW/cm2) (dBm) Max tune-up power Channel Freq. (MHz) modulation (dBm) Power density(mW/cm 2 ) 802.11a 802.11n H20 802.11n H40 conducted power Tune-up power Antenna Evaluation result at 20cm Power density Limits Gain (dBm)(mW)Numeric 5500 12.4812±11319.952621.580.006271 5600 11.8312±11319.952621.580.006271 5700 12.312±11319.952621.580.006271 5500 12.4912±11319.952621.580.006271 5600 11.8912±11319.952621.580.006271 5700 12.3412±11319.952621.580.006271 5510 10.6710±11112.589251.580.003961 5590 11.8612±11319.952621.580.006271 5670 12.63 12±11319.952621.580.006271 802.11a 802.11n H20 802.11n H40 (mW/cm2) (dBm) Max tune-up power Channel Freq. (MHz) modulation (dBm) Power density(mW/cm 2 ) conducted power Tune-up power Antenna Evaluation result at 20cm Power density Limits Gain (dBm)(mW)Numeric 5260 9.9610.5±111.514.125381.580.004441 5280 10.2810.5±111.514.125381.580.004441 5320 11.1710.5±111.514.125381.580.004441 5260 10.0811±11215.848931.580.004981 5280 10.3711±11215.848931.580.004981 5320 11.2611±11215.848931.580.004981 5270 10.3311±11215.848931.580.004981 5310 11.3611±11215.848931.580.004981 802.11a 802.11n H20 802.11n H40 (mW/cm2) (dBm) Max tune-up power Channel Freq. (MHz) modulation (dBm) Power density(mW/cm 2 ) 5.8G Conclusion: For the max result : 0.00790≤ 1.0 for Max Power Density, No RF exposure evaluation is required. Signature: Date: 2020-04-10 NAME AND TITLE (Please print or type): alex li/Manager COMPANY (Please print or type): Shenzhen NTEK Testing Technology Co., Ltd./ 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen P.R. China. conducted power Tune-up power Antenna Evaluation result at 20cm Power density Limits Gain (dBm)(mW)Numeric 574510.0411±11215.848931.580.004981 578510.7611±11215.848931.580.004981 582511.7111±11215.848931.580.004981 5745 10.14 11±11215.848931.580.004981 578510.8311±11215.848931.580.004981 582511.7811±11215.848931.580.004981 5755 10.4 11±11215.848931.580.004981 579511.1511±11215.848931.580.004981 (mW/cm2) (dBm) Max tune-up power Channel Freq. (MHz) modulation (dBm) Power density(mW/cm 2 ) 802.11a 802.11n20 802.11n40

Report No.: S19032701506002 Version.1.3 Page 1 of 48 RADIO TEST REPORT FCC ID: Z3K-X20674012A Product: HDMI Tablet Combo (RSE) Trade Mark: X-PREMiUM Model No.: X2 Family Model: X2+X2 Report No.: S19032701506002 Issue Date: 03 Jan. 2020 Prepared for JET OPTOELECTRONICS CO.,LTD. 3F.,No.300,Yangguang St.Neihu Dist.,Taipei City 11491 Taiwan. Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park Sanwei, Xixiang, Bao'an District Shenzhen, Guangdong, China Tel.: +86-755-6115 6588 Fax.: +86-755-6115 6599 Website:http://www.ntek.org.cn Report No.: S19032701506002 Version.1.3 Page 2 of 48 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ............................................................................................................. 3 2 SUMMARY OF TEST RESULTS.............................................................................................................. 4 3 FACILITIES AND ACCREDITATIONS ..................................................................................................... 5 3.1 FACILITIES ....................................................................................................................................... 5 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ........................................................................ 5 3.3 MEASUREMENT UNCERTAINTY .................................................................................................... 5 4 GENERAL DESCRIPTION OF EUT ........................................................................................................ 6 5 DESCRIPTION OF TEST MODES ........................................................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ................................................................................................. 9 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM .............................................................. 9 6.2 SUPPORT EQUIPMENT ................................................................................................................. 10 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS ................................................................................... 11 7 TEST REQUIREMENTS......................................................................................................................... 13 7.1 CONDUCTED EMISSIONS TEST .................................................................................................. 13 7.2 RADIATED SPURIOUS EMISSION ................................................................................................ 16 7.3 6DB BANDWIDTH ........................................................................................................................... 25 7.4 DUTY CYCLE .................................................................................................................................. 26 7.5 PEAK OUTPUT POWER ................................................................................................................. 27 7.6 POWER SPECTRAL DENSITY ...................................................................................................... 28 7.7 CONDUCTED BAND EDGE MEASUREMENT .............................................................................. 30 7.8 SPURIOUS RF CONDUCTED EMISSIONS ................................................................................... 31 7.9 ANTENNA APPLICATION ............................................................................................................... 32 8 TEST RESULTS ..................................................................................................................................... 33 8.1 DUTY CYCLE ..................................................................................................................................... 33 8.2 MAXIMUM CONDUCTED OUTPUT POWER ............................................................................................ 35 8.3 OCCUPIED CHANNEL BANDWIDTH ....................................................................................................... 37 8.4 MAXIMUM POWER SPECTRAL DENSITY LEVEL ..................................................................................... 41 8.5 BAND EDGE ...................................................................................................................................... 43 Report No.: S19032701506002 Version.1.3 Page 3 of 48 1 TEST RESULT CERTIFICATION Applicant’s name ......................... : JET OPTOELECTRONICS CO.,LTD. Address ....................................... : 3F.,No.300,Yangguang St.Neihu Dist.,Taipei City 11491 Taiwan. Manufacturer's Name .................. : Hena Digital Technology (Shenzhen) Co., Ltd. Address ....................................... : 13F, Block B, Tairan Building, Futian District, Shenzhen, China Product description Product name .............................. : HDMI Tablet Combo (RSE) Model and/or type reference ..... : X2 Family Model ............................... : X2+X2 Measurement Procedure Used: APPLICABLE STANDARDS APPLICABLE STANDARD/ TEST PROCEDURE TEST RESULT FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart C ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Complied This device described above has been tested by Shenzhen NTEK Testing Technology Co., Ltd., and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of Shenzhen NTEK Testing Technology Co., Ltd., this document may be altered or revised by Shenzhen NTEK Testing Technology Co., Ltd., personnel only, and shall be noted in the revision of the document. The test results of this report relate only to the tested sample identified in this report. Date of Test : 28 10. 2019 ~ 03 Ja…

Text truncated - open the document above for the full version.

Report No.: S19032701506003 Version.1.3 Page 1 of 86 FCC RADIO TEST REPORT FCC ID: Z3K-X20674012A Product: HDMI Tablet Combo (RSE) Trade Mark: X-PREMiUM Model No.: X2 Family Model: X2+X2 Report No.: S19032701506003 Issue Date: 03 Jan. 2020 Prepared for JET OPTOELECTRONICS CO.,LTD. 3F.,No.300,Yangguang St.Neihu Dist.,Taipei City 11491 Taiwan. Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park Sanwei, Xixiang, Bao'an District Shenzhen, Guangdong, China Tel.: +86-755-6115 6588 Fax.: +86-755-6115 6599 Website:http://www.ntek.org.cn Report No.: S19032701506003 Version.1.3 Page 2 of 86 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ............................................................................................................. 3 2 SUMMARY OF TEST RESULTS.............................................................................................................. 4 3 FACILITIES AND ACCREDITATIONS ..................................................................................................... 5 3.1 FACILITIES ......................................................................................................................................... 5 3.2 LABORATORY ACCREDITATIONS AND LISTINGS .......................................................................... 5 3.3 MEASUREMENT UNCERTAINTY .................................................................................................... 5 4 GENERAL DESCRIPTION OF EUT ........................................................................................................ 6 5 DESCRIPTION OF TEST MODES ........................................................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ............................................................................................... 10 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ............................................................ 10 6.2 SUPPORT EQUIPMENT ................................................................................................................. 11 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS ................................................................................... 12 7 TEST REQUIREMENTS......................................................................................................................... 14 7.1 CONDUCTED EMISSIONS TEST .................................................................................................. 14 7.2 RADIATED SPURIOUS EMISSION ................................................................................................ 17 7.3 6DB BANDWIDTH ........................................................................................................................... 26 7.4 DUTY CYCLE .................................................................................................................................. 28 7.5 MAXIMUM OUTPUT POWER ......................................................................................................... 29 7.6 POWER SPECTRAL DENSITY ...................................................................................................... 31 7.7 CONDUCTED BAND EDGE MEASUREMENT .............................................................................. 33 7.8 SPURIOUS RF CONDUCTED EMISSIONS ................................................................................... 35 7.9 ANTENNA APPLICATION ............................................................................................................... 36 8 TEST RESULTS ..................................................................................................................................... 37 8.1 DUTY CYCLE ..................................................................................................................................... 37 8.2 MAXIMUM CONDUCTED OUTPUT POWER ............................................................................................ 44 8.3 OCCUPIED CHANNEL BANDWIDTH ....................................................................................................... 45 8.4 MAXIMUM POWER SPECTRAL DENSITY LEVEL ..................................................................................... 58 8.5 BAND EDGE ...................................................................................................................................... 65 8.6 CONDUCTED RF SPURIOUS EMISSION ................................................................................................ 74 Report No.: S19032701506003 Version.1.3 Page 3 of 86 1 TEST RESULT CERTIFICATION Applicant’s name ......................... : JET OPTOELECTRONICS CO.,LTD. Address ....................................... : 3F.,No.300,Yangguang St.Neihu Dist.,Taipei City 11491 Taiwan. Manufacturer's Name .................. : Hena Digital Technology (Shenzhen) Co., Ltd. Address ....................................... : 13F, Block B, Tairan Building, Futian District, Shenzhen, China Product description Product name .............................. : HDMI Tablet Combo (RSE) Model and/or type reference ..... : X2 Family Model ............................... : X2+X2 Measurement Procedure Used: APPLICABLE STANDARDS APPLICABLE STANDARD/ TEST PROCEDURE TEST RESULT FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart C ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Complied This device described above has been tested by Shenzhen NTEK Testing Technology Co., Ltd., and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of Shenzhen NTEK Testing Technology Co., Ltd., this document may be altered or revised by Shenzhen NTEK Testing Technology Co., Ltd., personnel only, and shall be noted in the revision of the …

Text truncated - open the document above for the full version.

Report No.: S19032701506003 Version.1.3 Page 71 of 86 Band Edge NVNT 802.11n(HT20) 2462MHz Ant1 Emission Band Edge NVNT 802.11n(HT40) 2422MHz Ant1 Ref Report No.: S19032701506003 Version.1.3 Page 72 of 86 Band Edge NVNT 802.11n(HT40) 2422MHz Ant1 Emission Band Edge NVNT 802.11n(HT40) 2452MHz Ant1 Ref Report No.: S19032701506003 Version.1.3 Page 73 of 86 Band Edge NVNT 802.11n(HT40) 2452MHz Ant1 Emission Report No.: S19032701506003 Version.1.3 Page 74 of 86 8.6 CONDUCTED RF SPURIOUS EMISSION Condition Mode Frequency (MHz) Antenna Max Value (dBc) Limit (dBc) Verdict NVNT 802.11b 2412 Ant 1 -47.81 -20 Pass NVNT 802.11b 2437 Ant 1 -47.61 -20 Pass NVNT 802.11b 2462 Ant 1 -47.76 -20 Pass NVNT 802.11g 2412 Ant 1 -43.02 -20 Pass NVNT 802.11g 2437 Ant 1 -44.92 -20 Pass NVNT 802.11g 2462 Ant 1 -44.3 -20 Pass NVNT 802.11n(HT20) 2412 Ant 1 -45.13 -20 Pass NVNT 802.11n(HT20) 2437 Ant 1 -45.21 -20 Pass NVNT 802.11n(HT20) 2462 Ant 1 -45.15 -20 Pass NVNT 802.11n(HT40) 2422 Ant 1 -42.53 -20 Pass NVNT 802.11n(HT40) 2437 Ant 1 -44.43 -20 Pass NVNT 802.11n(HT40) 2452 Ant 1 -44.24 -20 Pass Tx. Spurious NVNT 802.11b 2412MHz Ant1 Ref Report No.: S19032701506003 Version.1.3 Page 75 of 86 Tx. Spurious NVNT 802.11b 2412MHz Ant1 Emission Tx. Spurious NVNT 802.11b 2437MHz Ant1 Ref Report No.: S19032701506003 Version.1.3 Page 76 of 86 Tx. Spurious NVNT 802.11b 2437MHz Ant1 Emission Tx. Spurious NVNT 802.11b 2462MHz Ant1 Ref Report No.: S19032701506003 Version.1.3 Page 77 of 86 Tx. Spurious NVNT 802.11b 2462MHz Ant1 Emission Tx. Spurious NVNT 802.11g 2412MHz Ant1 Ref Report No.: S19032701506003 Version.1.3 Page 78 of 86 Tx. Spurious NVNT 802.11g 2412MHz Ant1 Emission Tx. Spurious NVNT 802.11g 2437MHz Ant1 Ref Report No.: S19032701506003 Version.1.3 Page 79 of 86 Tx. Spurious NVNT 802.11g 2437MHz Ant1 Emission Tx. Spurious NVNT 802.11g 2462MHz Ant1 Ref Report No.: S19032701506003 Version.1.3 Page 80 of 86 Tx. Spurious NVNT 802.11g 2462MHz Ant1 Emission Tx. Spurious NVNT 802.11n(HT20) 2412MHz Ant1 Ref Report No.: S19032701506003 Version.1.3 Page 81 of 86 Tx. Spurious NVNT 802.11n(HT20) 2412MHz Ant1 Emission Tx. Spurious NVNT 802.11n(HT20) 2437MHz Ant1 Ref Report No.: S19032701506003 Version.1.3 Page 82 of 86 Tx. Spurious NVNT 802.11n(HT20) 2437MHz Ant1 Emission Tx. Spurious NVNT 802.11n(HT20) 2462MHz Ant1 Ref Report No.: S19032701506003 Version.1.3 Page 83 of 86 Tx. Spurious NVNT 802.11n(HT20) 2462MHz Ant1 Emission Tx. Spurious NVNT 802.11n(HT40) 2422MHz Ant1 Ref Report No.: S19032701506003 Version.1.3 Page 84 of 86 Tx. Spurious NVNT 802.11n(HT40) 2422MHz Ant1 Emission Tx. Spurious NVNT 802.11n(HT40) 2437MHz Ant1 Ref Report No.: S19032701506003 Version.1.3 Page 85 of 86 Tx. Spurious NVNT 802.11n(HT40) 2437MHz Ant1 Emission Tx. Spurious NVNT 802.11n(HT40) 2452MHz Ant1 Ref Report No.: S19032701506003 Version.1.3 Page 86 of 86 Tx. Spurious NVNT 802.11n(HT40) 2452MHz Ant1 Emission END OF REPORT

FCC ID: Z3K-X20674012A Radiated Measurement Photos Conducted Measurement Photos