Z3W-00001-AIR4420300 Mbps Dualband 1 Port Ap/Router

www.airties.com YM.AP.4420.UM.EN.D07REV04112011 7/24 people support +90 212 444 0 239 Three year warranty AirTouch 7/24 people support +90 212 444 0 239 (International) 7/24 people support +90 212 444 0 239 Three year warranty AirTouch Visit www.airties.com for full list of technical support telephone numbers. Wireless life Air 4420 and Air 2411 Wireless Video Kit Quick Installation Guide Turn off your AirTies Set Top Box. Place the Air 2411 into one of the USB ports on the AirTies Set Top Box, as shown below. Air 4420 Complete the cabling process as shown in the diagram. 1. Connect the power adapter inside your box to the power inlet socket of your device and plug into the electric socket. 2. Turn on the Air 4420 by switching the On/Off button to position “1”. 3. Connect the Ethernet cable inside the box to the Air 4420’s Ethernet port and connect the other end to a gateway / modem or switch’s Ethernet port. Step 1 Installation Air 2411 Access Point Cabling Turn on your Set Top Box and Television. Set the input on your Television to be the Set Top Box. When you are prompted press the AirTouch button your Air 2411. Immediately afterwards press the OK button on the remote control. After approximately 30 seconds the wireless connection will be configured between the Set Top Box and the Air 4420. Congratulations! You successfully configured your AirTies wireless kit. You should be able to watch TV from your Set Top Box. For more information and for a detailed user manual, please visit www.airties.com 1 3 2 Step 2 Setup This device complies with Part 15 of the FCC Rules. Operation is subject to the following two con- ditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

No__________ Attention! Please request that the seller completely fills out the warranty card, check the correctness of provided serial number and product models. PRODUCT: MODEL: SERIAL NUMBER: DATE OF SALE: Warranty period – three years from the date of purchase. FIRM-SELLER: FIRM-SELLER ADDRESS AND PHONE NUMBER: Defect-free item received with a full set, with warranty conditions, rules and service conditions acquainted and agreed CUSTOMER’S SIGNATURE: FILLING DATE: STAMP HERE: With “unconditional customer satisfaction” as its standard , AirTies offers the following terms and conditions on all its products: 24/7 people support +90 212 444 0239 YM.AP.4420.GC.ML.D00REV04112011 AirTies Declaration of Conformity & Warranty Air 4420 Wireless life Air 4420 This document confirms that above mentioned device conforms to R&TTE Directive (1999/5/EC) and conforms to the following standards: EN 300 328 V1.7.1: 2006 EN 301 489-1 V1.8.1:2008 EN 301 489-17 V1.3.2:2008 EN301 893 V.1.5.1:2008 EN50385:2002 EN 60950-1:2006 +A11:2009 The following importer/manufacturer takes responsibility based on this declaration AirTies Wireless Networks (Company name, importer) Gülbahar Mah. Avni Dilligil Sk. No: 5 Çelik İş Merkezi Mecidiyeköy, İstanbul, (Company address, importer) (Company address, Manufacturer) (Person, responsible for this declaration) (Person, responsible for this declaration) Bülent Çelebi (Name, Surname, importer) (Name, Surname, Manufacturer) CEO (Position) Turkey 2010/11/09 Place Date Place Date Certificate of Conformity (Company name, Manufacturer) (Position) FCC: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Opera- tion is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with mini- mum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The availability of some specific channels and/or opera- tional frequency bands are country dependent and are firmware programmed at the factory to match the intend- ed destination. The firmware setting is not accessible by the end user. The following importer/manufacturer takes responsibility based on this declaration AirTies Wireless Networks (Company name, importer) Gülbahar Mah. Avni Dilligil Sk. No: 5 Çelik İş Merkezi Mecidiyeköy, İstanbul, (Company address, importer) (Company address, Manufacturer) (Person, responsible for this declaration) (Person, responsible for this declaration) Bülent Çelebi (Name, Surname, importer) (Name, Surname, Manufacturer) CEO (Position) Turkey 2010/11/09 Place Date Place Date (Company name, Manufacturer) (Position) Warranty 1. Manufacturer guarantees absence of manufacturing defects and failures of the Equipment and bears responsibility accordingly to warranty. 2. If your AirTies product fails, contact AirTies 24/7 Technical Support first (see 24/7 support number on www.airties.com). Most problems can be solved by consulting the experts at AirTies technical support. 3. If the AirTies 24/7 technical support requires, you will be assigned a problem tracking number and asked to ship the faulty unit to AirTies repair center. Please, write the problem tracking number legibly on the package. 4. The product is under warranty for 3 years starting from the date of purchase. 5. The parts that are shipped with the product such as power adapter and cables are all covered under this 3-year warranty. 6. If the product fails for any reason within the warranty period, it will be repaired by AirTies or an AirTies Authorised service provider at no cost to the customer. 7. The units that are not repairable will be replaced by a new or refurbished unit at no cost to the customer. 8. The warranty does not cover defects caused by misuse or abuse of the product. 9. The products that are sent to an Authorised AirTies Service Center, will be repaired or replaced and shipped back to the customer within 3 business days from the date it is received. 10. If a replacement with the same product model is not possible, AirTies will replace the unit with a newer model that has all the features of the original product. 11. Check www.airties.com for repair centers. ©2011 AirTies Wireless Networks, all rights reserved. Trademarks or registered t…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3

Page 4 Page 5 Page 6 Page 7

FCC ID: Z3W-00001-AIR4420 Report No.: RF111004C12 Operational Description This device is a 300 Mbps Dualband 1 Port Ap/Router, which operates both of in the 2.4GHz and 5GHz bands, the maximum data rate could be up to 300Mbps with OFDM technique. If the signal to noise ratio is too poor which could not support 300Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by ac adapter. The antennas are PIFA antennas without any antenna connector. For more detailed instruction, please take a look at the user’s manual. FCC 15.407(c) states: The device shall automatically discontinue transmission in case of either absence of information to transmit or operational failure. These provisions are not intended to preclude the transmission of control or signaling information or the use of repetitive codes used by certain digital technologies to complete frame or burst intervals. Applicants shall include in their application for equipment authorization a description of how this requirement is met” Data transmission is always initiated by software, which is then pass down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets (ACKs, CTS, PSPoll, etc...) are initiated by the MAC. There are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted.

Report No.: SA111004C12 Report Format Version 4.0.0 1 RF EXPOSURE REPORT REPORT NO.: SA111004C12 MODEL NO.: Air4420 FCC ID: Z3W-00001-AIR4420 RECEIVED: Oct. 04, 2011 TESTED: Oct. 17 ~ Oct. 28, 2011 ISSUED: Nov. 01, 2011 APPLICANT: AirTies Wireless Networks ADDRESS: Gülbahar Mah. Avni Dilligil Sok. Celik Is Merkezi No:5 Mecidiyekoy, Istanbul, Turkey ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 6 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced, except in full, without the written approval of our laboratory. The client should not use it to claim product, certification, approval, or endorsement by any government agency. The test results in the report only apply to the tested sample. Report No.: SA111004C12 Report Format Version 4.0.0 2 TABLE OF CONTENTS RELEASE CONTROL RECORD .............................................................................................. 3 1. CERTIFICATION ........................................................................................................... 4 2. RF EXPOSURE............................................................................................................. 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE)....................................... 5 2.2 MPE CALCULATION FORMULA .................................................................................. 5 2.3 CLASSIFICATION ......................................................................................................... 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER................................ 6 Report No.: SA111004C12 Report Format Version 4.0.0 3 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED Original release NA Nov. 01, 2011 Report No.: SA111004C12 Report Format Version 4.0.0 4 1. CERTIFICATION PRODUCT: 300 Mbps Dualband 1 Port Ap/Router MODEL: Air4420 BRAND: AirTies APPLICANT: AirTies Wireless Networks TESTED: Oct. 17 ~ Oct. 28, 2011 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: Air4420) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE:Nov. 01, 2011 Ivy Lin / Specialist APPROVED BY : , DATE: Nov. 01, 2011 Gary Chang / Technical Manager Report No.: SA111004C12 Report Format Version 4.0.0 5 2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA111004C12 Report Format Version 4.0.0 6 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MAX CONDUCTED POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 29.7 2 20 0.294 1 5180-5240 16.8 3.5 20 0.021 1 5745-5825 26.7 3.5 20 0.208 1

Report No.: RF111004C12 1 Report Format Version 4.0.0 FCC TEST REPORT (15.247) REPORT NO.: RF111004C12 MODEL NO.: Air4420 FCC ID: Z3W-00001-AIR4420 RECEIVED: Oct. 04, 2011 TESTED: Oct. 17 ~ Oct. 28, 2011 ISSUED: Nov. 01, 2011 APPLICANT: AirTies Wireless Networks ADDRESS: Gülbahar Mah. Avni Dilligil Sok. Celik Is Merkezi No:5 Mecidiyekoy, Istanbul, Turkey ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 137 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product, certification, approval or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Report No.: RF111004C12 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD.............................................................................................. 5 1. CERTIFICATION........................................................................................................... 6 2. SUMMARY OF TEST RESULTS .................................................................................. 7 2.1 MEASUREMENT UNCERTAINTY................................................................................ 7 3. GENERAL INFORMATION ........................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT ............................................................................. 8 3.2 DESCRIPTION OF TEST MODES ............................................................................. 10 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST ........................................................ 11 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................. 12 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................ 16 3.4 DESCRIPTION OF SUPPORT UNITS ....................................................................... 16 4. TEST TYPES AND RESULTS (FOR 2.4GHz BAND) ................................................. 17 4.1 RADIATED EMISSION MEASUREMENT .................................................................. 17 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT................................................ 17 4.1.2 TEST INSTRUMENTS................................................................................................ 18 4.1.3 TEST PROCEDURES ................................................................................................ 19 4.1.4 DEVIATION FROM TEST STANDARD....................................................................... 19 4.1.5 TEST SETUP.............................................................................................................. 20 4.1.6 EUT OPERATING CONDITIONS ............................................................................... 20 4.1.7 TEST RESULTS ......................................................................................................... 21 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................. 34 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT........................................... 34 4.2.2 TEST INSTRUMENTS................................................................................................ 34 4.2.3 TEST PROCEDURES ................................................................................................ 35 4.2.4 DEVIATION FROM TEST STANDARD....................................................................... 35 4.2.5 TEST SETUP.............................................................................................................. 36 4.2.6 EUT OPERATING CONDITIONS ............................................................................... 36 4.2.7 TEST RESULTS ......................................................................................................... 37 4.3 6dB BANDWIDTH MEASUREMENT.......................................................................... 39 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ....................................................... 39 4.3.2 TEST INSTRUMENTS................................................................................................ 39 4.3.3 TEST PROCEDURE................................................................................................... 39 4.3.4 DEVIATION FROM TEST STANDARD....................................................................... 39 4.3.5 TEST SETUP.............................................................................................................. 40 4.3.6 EUT OPERATING CONDITIONS ............................................................................... 40 4.3.7 TEST RESULTS ......................................................................................................... 41 4.4 MAXIMUM OUTPUT POWER .................................................................................... 45 Report No.: RF111004C12 3 Report Format Version 4.0.0 4.4.1 LIMITS OF MAXIMUM OUTPUT POWER MEASUREMENT..................................... 45 4.4.2 INSTRUMENTS .......................................................................................................... 45 4.4.3 TEST PROCEDURES ................................................................................................ 45 4.4.4 DEVIATION FROM TEST STANDARD....................................................................... 46 4.4.5 TEST SETUP.............................................................................................................. 46 4.4.6 EUT OPERATING CONDITIONS ...................................…

Text truncated - open the document above for the full version.

Report No.: RF111004C12-1 1 Report Format Version 4.0.0 FCC TEST REPORT (15.407) REPORT NO.: RF111004C12-1 MODEL NO.: Air4420 FCC ID: Z3W-00001-AIR4420 RECEIVED: Oct. 04, 2011 TESTED: Oct. 17 ~ Oct. 28, 2011 ISSUED: Nov. 01, 2011 APPLICANT: AirTies Wireless Networks ADDRESS: Gülbahar Mah. Avni Dilligil Sok. Celik Is Merkezi No:5 Mecidiyekoy, Istanbul, Turkey ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 78 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product, certification, approval or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Report No.: RF111004C12-1 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD.............................................................................................. 4 1. CERTIFICATION........................................................................................................... 5 2. SUMMARY OF TEST RESULTS .................................................................................. 6 2.1 MEASUREMENT UNCERTAINTY................................................................................ 6 3. GENERAL INFORMATION ........................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................. 7 3.2 DESCRIPTION OF TEST MODES ............................................................................... 9 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST .......................................................... 9 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................. 10 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................ 12 3.4 DESCRIPTION OF SUPPORT UNITS ....................................................................... 12 4. TEST TYPES AND RESULTS .................................................................................... 13 4.1 RADIATED EMISSION MEASUREMENT .................................................................. 13 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT................................................ 13 4.1.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS .............. 13 4.1.3 TEST INSTRUMENTS................................................................................................ 14 4.1.4 TEST PROCEDURES ................................................................................................ 15 4.1.5 DEVIATION FROM TEST STANDARD....................................................................... 15 4.1.6 TEST SETUP.............................................................................................................. 16 4.1.7 EUT OPERATING CONDITION.................................................................................. 16 4.1.8 TEST RESULTS ......................................................................................................... 17 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................. 26 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT........................................... 26 4.2.2 TEST INSTRUMENTS................................................................................................ 26 4.2.3 TEST PROCEDURES ................................................................................................ 27 4.2.4 DEVIATION FROM TEST STANDARD....................................................................... 27 4.2.5 TEST SETUP.............................................................................................................. 28 4.2.6 EUT OPERATING CONDITIONS ............................................................................... 28 4.2.7 TEST RESULTS ......................................................................................................... 29 4.3 PEAK TRANSMIT POWER MEASUREMENT ........................................................... 31 4.3.1 LIMITS OF PEAK TRANSMIT POWER MEASUREMENT ......................................... 31 4.3.2 TEST INSTRUMENTS................................................................................................ 31 4.3.3 TEST PROCEDURE................................................................................................... 32 4.3.4 DEVIATION FROM TEST STANDARD....................................................................... 32 4.3.5 TEST SETUP.............................................................................................................. 32 4.3.6 EUT OPERATING CONDITIONS ............................................................................... 32 4.3.7 TEST RESULTS ......................................................................................................... 33 Report No.: RF111004C12-1 3 Report Format Version 4.0.0 4.4 PEAK POWER EXCURSION MEASUREMENT ........................................................ 37 4.4.1 LIMITS OF PEAK POWER EXCURSION MEASUREMENT...................................... 37 4.4.2 TEST INSTRUMENTS................................................................................................ 37 4.4.3 TEST PROCEDURE................................................................................................... 37 4.4.4 DEVIATION FROM TEST STANDARD....................................................................... 38 4.4.5 TEST SETUP.............................................................................................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST