Z49-00004Multi-zone Programmable CONNEX Controller

Owner’s Manual Model CX-MPC 7212190100R01 IMPORTANT SAFETY INFORMATION: Always read this manual first before attempting to install or use this device. For your safety, always comply with all warnings and safety instructions contained in this manual to prevent personal injury or property damage. To view the full line of Dimplex products, please visit www.dimplex.com 2 www.dimplex.com Table of Contents ! NOTE: Procedures and techniques that are considered important enough to emphasize. CAUTION: Procedures and techniques which, if not carefully followed, will result in damage to the equipment. WARNINg: Procedures and techniques which, if not carefully followed, will expose the user to the risk of fire, serious injury, or death. Welcome & Congratulations . . . . . . . . . . . . . . . . . .3 IMPoRTanT InsTRuCTIons . . . . . . . . . . . . . . . .4 Product overview ...........................5 Wall setter Installation .......................7 Initial set up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Program schedule set up . . . . . . . . . . . . . . . . . . . .10 General Functions. . . . . . . . . . . . . . . . . . . . . . . . . .12 operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Reference Tables ..........................19 3 Welcome & Congratulations Thank you and congratulations for choosing to purchase a Multi-zone Programmable ConnEX™ Controller from Dimplex. Please carefully read and save these instructions. CAUTION: Read all instructions and warnings carefully before starting installation. Failure to follow these instructions may result in a possible electric shock, fire hazard and will void the warranty. Date Code NO NEED TO RETURN TO THE STORE Questions with operation or mounting? Require Parts Information? Product under Manufacturer’s Warranty? Contact us at:  www.dimplex.com/customer_support For Troubleshooting and Technical support OR  Toll-Free 1-888-DIMPLEX (1-888-346-7539) Monday to Friday 8:00 a.m. to 4:30 p.m. EsT Please have your model number and product serial number ready. (see above) 4 www.dimplex.com CAUTION: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving • antenna. Increase the separation between the • equipment and the receiver. Connect the equipment into an outlet • on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced • radio/TV technician for help. This device complies with Part 15 of the FCC Rules. operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC CAUTION: any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Industry Canada licence-exempt Rss standard(s). operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device IMPORTANT INSTRUCTIONS must accept any interference, including interference that may cause undesired operation of the device. WARNINg: Remote control contains small batteries. Keep away from children. If swallowed, seek medical attention immediately. WARNINg: Do not install battery backwards, charge, put in fire or mix with used or other battery types - may explode or leak causing injury. 5 Product Overview The Multi-zone Programmable ConnEX™ Controller is a Dim- plex exclusive, operating four individual heat zones wirelessly from one remote location. ConnEX™ wireless technology easily synchronizes multiple Lin- ear Proportional Convectors and Precision Comfort Heaters to one controller for precise temperature control throughout the home. The easy-to-use touch screen allows for 7-day/ 4-event programming that combines with zone heating for incredible energy savings. Multi-zone Programmable Con- nEX™ Controllers link wirelessly to Dimplex Linear Proportional Convectors and Precision Com- fort Heaters to provide simple whole home control. Zones The controller is set up so that the user can divide their house into to up to 4 different heating zones. These can be separate heaters or a selection of one or more heaters that will all be set to run at the same time and temperature settings. By dividing the house into zones you can program the controller to raise the temperature in par- ticular rooms during the time you normally use them and reduce the temperature when they are not in use. By having a wireless controller the components within a zone do not have to be located in the same area of the house, as with traditional heating systems. The components in any particular zone can be spread all through the house. For example: Zone 1 - all of the bedrooms,• Zone 2 - all of the bathrooms, • Zone 3 - Kitchen and Living room. • CAUTION: Zones can be set up as any combination of the Dimplex electronic controlled heaters as long as there is one heater that is within 15m (50ft) of the controller and the subsequent heaters are within 15m (50ft) of the controller or any other heater. Events The controller has been designed to divide each day into 4 different time settings for each day…

Text truncated - open the document above for the full version.

UltraTech Group of Labs FCC TCB & IC CB Ultratech’s Accreditations: 0685 FCC 91038 1309 46390-2049 NvLap Lab Code 200093-0 SL2-IN-E-1119R Korea KCC-RRL CA2049 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com Email: [email protected] September 20, 2012 Ultratech Engineering Labs, Inc. 3000 Bristol Circle Oakville, Ontario L6H 6G4 Subject: Application for Equipment Certification under FCC Part 15, Subpart C, Section 15.249, Low Power Transmitters Operating in the Frequency Band 2400 - 2483.5 MHz. Applicant: Dimplex North America Limited Product: Multi-zone Programmable CONNEX Controller Model No.: 6700490100 FCC ID: Z49-00004 Dear Sir/Madam: As appointed agent for Dimplex North America Limited, we submit the application for equipment certification of the above product. Kindly review all required documents uploaded to your E-Filing Site. If you have any queries, please do not hesitate to contact us. Yours truly, Dharmajit Solanki Dharmajit Solanki Authorized Agent

ANNEX 3 – EXTERNAL PHOTOS Dimplex North America Limited Multi-zone Programmable CONNEX Controller, Model 6700490100 FCC ID: Z49-00004, IC: 6592A-00004 A1 - 1 ANNEX 3 – EXTERNAL PHOTOS Dimplex North America Limited Multi-zone Programmable CONNEX Controller, Model 6700490100 FCC ID: Z49-00004, IC: 6592A-00004 A1 - 2 ANNEX 3 – EXTERNAL PHOTOS Dimplex North America Limited Multi-zone Programmable CONNEX Controller, Model 6700490100 FCC ID: Z49-00004, IC: 6592A-00004 A1 - 3

78.9 REF. 144.1 REF. 89.69 41.06 66.00 5.93 7.54 2X R2.00 A A C C B B D D 01 78.79 89° TYP. 16.50 0.76 144.01 89° TYP. 5.00 5.33 TYP. 69.85 19.0 31.37 9.0 R3.00 R5.0 8.15 TYP. 2X TRUE R3.0 6X 2.90 THRU ALL 5.50 X 90° 5.50 0.20 4.42 7.4 TRUE R1.0 TYP. 14.6 4.2 55 13.5 51.8 DATE CODE TO BE HOT STAMPED AS SHOWN IN FUTURE ASSEMBLY, SEE DWG #6700490000 "FCC ID:", "IC ID:", "DIMPLEX #:" AND THEIR ASSOCIATED IDENTIFIERS TO BE PLACED IN THIS AREA. ALL TEXT AND NUMBERS TO BE SAME SIZE AND FONT AS SHOWN AND EMBOSSED (RAISED) 0.10mm SO THAT IT IS CLEAR AND LEGIBLE. 0.43 TYP. 5.87 15.00 5.97 7.5 3.23 6.00 3.00 EE C L 2.00 4.00 8.20 1.60 5.00 TYP. 7.00 TYP. 1.00 R0.75 TYP. 3.01 SECTION A-A SCALE 1 : 1 5.00 8.20 SECTION C-C 2.00 13.00 0.51 TYP. 12.5 71.7 SECTION B-B SCALE 1 : 1 4.3 7.5 1.00 1.57 1.07 MIN. 31.30 1.75 TYP. 30.30 SECTION E-E SCALE 1 : 1 MIN. 67.40 1.7 51.00 1.57 TYP. 1.00 TYP. SECTION D-D SCALE 1 : 1 NOTES: PART #0441290100 AS SHOWN.1. ALL DIMENSIONS TO OUTSIDE EDGES UNLESS OTHERWISE SPECIFIED.2. MINIMUM DRAFT ANGLE TO BE 1 UNLESS OTHERWISE SPECIFIED.3. ANY DIMENSIONS NOT SHOWN, PLEASE REFER TO SOLID MODEL PROVIDED BY DIMPLEX N.A. OR 4. ASK. PART TO BE FREE OF SINK MARKS, FLOW LINES, FLASH, DISCOLOURATIONS AND SURFACE 5. INCONSISTANCIES. ALL EDGES TO BE FREE OF BURRS, SHARP EDGES AND IMPERFECTIONS.6. MATERIAL: UV STABLE ABS (or PC/ABS), MIN. 65C CONTINUOUS-USE RATED.7. COLOUR: WHITE (TO MATCH COLOUR OF DISPLAY COVER, #0440640000); TO BE APPROVED BY 8. DIMPLEX N.A. ENGINEERING & QUALITY DEPARTMENT) TEXTURE: SMOOTH (TO BE APPROVED BY DIMPLEX N.A. ENGINEERING & QUALITY DEPARTMENT)9. 00 02 REVISIONS REV.DESCRIPTIONDATEPCNIN'L 00 INITIAL RELEASE FOR PRODUCTION; RELOCATED KEY HOLE FEATURES: 19.0 WAS 14.0; MOVED DOWN 5mm; FCC/IC/DNA #'S MOVED DOWN 1mm MAY 31, 201213425D.C. 01 ADDED MATERIAL AT FOUR POINTS AROUND BATTERY TERMINAL INSERTION POINTS TO ADD STRENGTH 10JL1213425JAD 02ADDED FCC AND IC NUMBERS 05SE12JAD FEB 10, 2012 DATE BACK PANEL C ALL DIM. IN MILLIMETERS DO NOT SCALE FLAT IS FOR REFERENCE ONLY TOLERANCES: X.XX 0.15 X.X 0.8 X 3 HOLES: 0.15 ANGLES: 2 C THIS SYMBOL REPRESENTS A CONTROL DIMENSION. CONTROL DIMENSIONS ARE CONSIDERED TO BE A GOOD INDICATOR OF WHETHER A MANUFACTURING PROCESS IS IN CONTROL. THESE DIM. MUST HAVE A MIN. Cpk OF 1.33 FOR A SAMPLE 31 CONSECUTIVE PIECES. UNLESS OTHERWISE SPECIFIED 1:2 This drawing and the design of this article represented herein, are the exclusive property of Dimplex North America Limited and are provided strictly on a confidential basis. The drawing and design shall be used only for the purposes for which they have been provided and shall not be produced, reproduced, altered, used, published or disclosed to others without the prior written consent of Dimplex North America Limited. SCALE: CHK'D: DR BY: WHERE USED: FINISH: MATERIAL: REV.: SIZE: SHEET: DWG NO.: TITLE: 1 OF 1 0441290000 SEE NOTES 6700490000 SEE NOTES 02 D.C. J.S. No sharp edges on all parts. JUNE 5, 2012

ANNEX 2 – INTERNAL PHOTOS Dimplex North America Limited Multi-zone Programmable CONNEX Controller, Model 6700490100 FCC ID: Z49-00004, IC: 6592A-00004 A1 - 1 ANNEX 2 – INTERNAL PHOTOS Dimplex North America Limited Multi-zone Programmable CONNEX Controller, Model 6700490100 FCC ID: Z49-00004, IC: 6592A-00004 A1 - 2 ANNEX 2 – INTERNAL PHOTOS Dimplex North America Limited Multi-zone Programmable CONNEX Controller, Model 6700490100 FCC ID: Z49-00004, IC: 6592A-00004 A1 - 3

Multi-zone Programmable CONNEX Controller Model: 6700490100 FCC ID: Z49-00004 Applicant: Dimplex North America Limited 1367 Industrial Road Cambridge, ON N1R7G8 In Accordance With Federal Communications Commission (FCC) Part 15, Subpart C, Section 15.249 Low Power Transmitters Operating in the Frequency Band 2400 – 2483.5 MHz UltraTech's File No.: DIEX-018_FCC15C This Test report is Issued under the Authority of Tri M. Luu, BASc Vice President of Engineering UltraTech Group of Labs Date: September 20, 2012 Report Prepared by: Dharmajit Solanki Issued Date: September 20, 2012 Tested by: Hung Trinh Test Dates: September 14 -19, 2012  The results in this Test Report apply only to the sample(s) tested, and the sample tested is randomly selected.  This report must not be used by the client to claim product endorsement by NVLAP or any agency of the US Government. UltraTech 3000 Bristol Circle, Oakville, Ontario, Canada, L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com , Email: [email protected], Email: [email protected] FCC Korea KCC-RRL 91038 1309 46390-2049 NvLap Lab Code 200093-0 SL2-IN-E-1119R CA2049 FCC Part 15, Subpart C, Section 15.249 Page 1 Multi-zone Programmable CONNEX Controller, Model 6700490100 FCC ID: Z49-00004 TABLE OF CONTENTS EXHIBIT 1. INTRODUCTION ......................................................................................................................................... 2 1.1. SCOPE......................................................................................................................................................................... 2 1.2. RELATED SUBMITTAL(S)/GRANT(S) .................................................................................................................. 2 1.3. NORMATIVE REFERENCES ................................................................................................................................... 2 EXHIBIT 2. PERFORMANCE ASSESSMENT .............................................................................................................. 3 2.1. CLIENT INFORMATION .......................................................................................................................................... 3 2.2. EQUIPMENT UNDER TEST (EUT) INFORMATION ............................................................................................ 3 2.3. EUT’S TECHNICAL SPECIFICATIONS ................................................................................................................. 4 2.4. ASSOCIATED ANTENNA DESCRIPTION ............................................................................................................. 4 2.5. LIST OF EUT’S PORTS............................................................................................................................................. 4 2.6. ANCILLARY EQUIPMENT ...................................................................................................................................... 4 EXHIBIT 3. EUT OPERATING CONDITIONS AND CONFIGURATIONS DURING TESTS ............................... 5 3.1. CLIMATE TEST CONDITIONS ............................................................................................................................... 5 3.2. OPERATIONAL TEST CONDITIONS & ARRANGEMENT FOR TESTS ............................................................ 5 EXHIBIT 4. SUMMARY OF TEST RESULTS ............................................................................................................... 6 4.1. LOCATION OF TESTS.............................................................................................................................................. 6 4.2. APPLICABILITY & SUMMARY OF EMC EMISSION TEST RESULTS ............................................................. 6 4.3. MODIFICATIONS INCORPORATED IN THE EUT FOR COMPLIANCE PURPOSES....................................... 6 EXHIBIT 5. MEASUREMENTS, EXAMINATIONS & TEST DATA FOR EMC EMISSIONS............................... 7 5.1. TEST PROCEDURES................................................................................................................................................. 7 5.2. MEASUREMENT UNCERTAINTIES ...................................................................................................................... 7 5.3. MEASUREMENT EQUIPMENT USED ................................................................................................................... 7 5.4. ESSENTIAL/PRIMARY FUNCTIONS AS DECLARED BY THE MANUACTURER.......................................... 7 5.5. ANTENNA REQUIREMENTS [47 CFR § 15.203]................................................................................................... 7 5.6. 20 DB BANDWIDTH [§ 15.215(C)] ......................................................................................................................... 8 5.7. FUNDAMETAL FIELD STRENGTH AND HAROMIC EMISSIONS (RADIATED AT 3M) [47 CFR §§ 15.249(A), 15.209 & 15.205].................................................................................................................................... 12 5.8. RADIATED EMISSIONS FROM UNINTENTIONAL RADIATORS (DIGITAL DEVICES) [47 CFR §15.109(A)] ............................................................................................................................................................... 23 EXHIBIT 6. TEST EQUIPMENT LIST ......................................................................................................................... 25 EXHIBIT 7. MEASUREMENT UNCERTAINTY.........................................................................................................26 7.1. RADIATED EMISSION MEASUREMENT UNCERTAINTY .............................................................................. 26 FCC Part 15, Subpart C, Section 15.249 Page 2 Multi-zone Programmable CONNEX Controller, Model 6700490100 FCC ID: Z49-00004…

Text truncated - open the document above for the full version.

ANNEX 1 - TEST SETUP PHOTOS Dimplex North America Limited Multi-zone Programmable CONNEX Controller, Model 6700490100 FCC ID: Z49-00004, IC: 6592A-00004 A1 - 1 Tx Radiated Emissions at 3 m, Orthogonal Position 1 ANNEX 1 - TEST SETUP PHOTOS Dimplex North America Limited Multi-zone Programmable CONNEX Controller, Model 6700490100 FCC ID: Z49-00004, IC: 6592A-00004 A1 - 2 Tx Radiated Emissions at 3 m, Orthogonal Position 2 ANNEX 1 - TEST SETUP PHOTOS Dimplex North America Limited Multi-zone Programmable CONNEX Controller, Model 6700490100 FCC ID: Z49-00004, IC: 6592A-00004 A1 - 3 Tx Radiated Emissions at 3 m, Orthogonal Position 3 ANNEX 1 - TEST SETUP PHOTOS Dimplex North America Limited Multi-zone Programmable CONNEX Controller, Model 6700490100 FCC ID: Z49-00004, IC: 6592A-00004 A1 - 4 Tx Radiated Emissions at 3 m, Orthogonal Position 3 ANNEX 1 - TEST SETUP PHOTOS Dimplex North America Limited Multi-zone Programmable CONNEX Controller, Model 6700490100 FCC ID: Z49-00004, IC: 6592A-00004 A1 - 5 Unintentional Radiated Emissions ANNEX 1 - TEST SETUP PHOTOS Dimplex North America Limited Multi-zone Programmable CONNEX Controller, Model 6700490100 FCC ID: Z49-00004, IC: 6592A-00004 A1 - 6 Unintentional Radiated Emissions