
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Anaren Integrated Radio A2530R24x User’s Manual Release Date: 04/26/12 THIS PAGE INTENTIONALLY LEFT BLANK iii USER’S MANUAL Models A2530R24A and A2530R24C Contents 1. Overview .......................................................................................................................................................... 5 1.1. A2530R24A ................................................................................................................................................. 5 1.2. A2530R24C ................................................................................................................................................. 5 1.3. Features....................................................................................................................................................... 6 1.4. Theory of Operation.................................................................................................................................. 6 1.5. Applications ............................................................................................................................................... 8 2. Approvals and Usage ..................................................................................................................................... 9 2.1. Product Approvals .................................................................................................................................... 9 2.1.1. USA (Federal Communications Commission, FCC) ........................................................................... 9 2.1.1.1. FCC Labeling Requirements .................................................................................................. 9 2.1.1.2. End User Manual ................................................................................................................... 10 2.1.1.3. RF Exposure ............................................................................................................................ 10 2.1.2. Canada (Industry Canada, IC) .......................................................................................................... 11 2.1.2.1. IC Labeling Requirements .................................................................................................... 12 2.1.2.2. RF Exposure ............................................................................................................................ 13 2.1.3. Europe (Conformité Européenne, ) ............................................................................................... 13 2.2. Potential Interference Sources ............................................................................................................... 14 2.2.1. WLAN ............................................................................................................................................... 14 2.2.2. Bluetooth ® ......................................................................................................................................... 15 2.2.3. Microwave ovens ............................................................................................................................... 15 2.2.4. Other Interference ............................................................................................................................. 15 2.2.5. Time critical data ............................................................................................................................... 15 2.3. Approved Usage ..................................................................................................................................... 16 2.3.1. USA and Canada............................................................................................................................... 16 2.3.2. Europe ............................................................................................................................................... 17 3. Electrical Characteristics .............................................................................................................................. 18 3.1. Absolute Maximum Ratings .................................................................................................................. 18 3.2. Operating Conditions ............................................................................................................................. 19 3.3. Pin Out ...................................................................................................................................................... 19 3.4. Recommended Layout (dimensions in mm) ...................................................................................... 21 3.5. Power Supply Considerations ............................................................................................................... 22 4. Mechanical and Process ................................................................................................................................ 23 4.1. Radio Module Details (dimensions in mm) ........................................................................................ 23 4.1.1. A2530R24A ...................................................................................................................................... 23 4.1.2. A2530R24C ....................................................................................................................................... 23 4.2. Packaging Details (dimensions in mm) ............................................................................................... 24 4.2.1. Matrix Tray Packaging ..................................................................................................................... 24 4.2.2. Tape-Reel Packaging ......................................................................................................................... 24 4.3. Soldering.........................…
Text truncated - open the document above for the full version.
FCC ID: Z5IVSN1 – External Photo
FCC ID: Z5IVSM1 FCC ID Label
FCCC ID: Z5IVSN1 - FCC Labeel Placement
FCC ID: Z5IVSM1 Internal Photos – Component Side (Shield can over RF section) FCC ID: Z5IVSM1 Internal Photos – Comp onent Side (Detail, with shield can removed) FCC ID: Z5IVSM1 Internal Photos – Board Reverse FCC ID: Z5IVSM1 Internal Photos – Board Reverse (Detail)
Wireless External Antenna for 2.4 GHz Applications Pulse Part Number: W1030 © 2007 All Rights Reserved. W1030 Datasheet Version 1.1. September 2007 Feat ures - Shortest antennas in product lin e - For WLAN devices using WiFi (802.11b/g), Bluetooth® and ZigBee TM - Omni-directional radiation patte rn provides broad 360° coverage - One-quarter wavelength dipole confi guratio n - Connection options easily integrate with OEM designs Connector Option s - Reverse SMA (Male)* - SMA (Male) * Default Configuration – Please contact Pulse Applications Engineering for assistance in ordering connectors Weight........................................................6.3 grams Carton...........................................20/bag; 500/carton Dimensions: Inches mm Unless otherwise specified, a ll to lerances are ± .010 0.25 Frequency [GHz] VSWR Length Impedance [Nom] ≤ 2. 01/4, dipole50 Ω Electrical Specifications @ 25 ºC Note: This par t number is lead- free and RoHS compliant. N o additional suffix or identifier is required. Gain [dBi] 2.0 Radiatio n Omni Polarization Vertic al Antenna Part No. W1030 Pulse Antennas Takatie 6 90440 K empele Finland Tel: +358 207 935 500 www.pulseeng.com/antennas Exte rnal Antennas Sal es Contacts USA858 674 8100 UK44 1483 401 700 France33 3 84 35 04 04 Singapore65 6287 8998 Shanghai86 21 32181071 China86 769 5538070 Taiwan886 2 26980228 Electrical Wireless External Antenna for 2.4 GHz Applications Pulse Part Number: W1030 © 2007 All Rights Reserved. W1030 Datasheet Version 1.1. September 2007 Vertical Posi tion Horizontal Posi tion Gain Performance W1030 Omni-directional antennas provide a uniform, donut- shaped, 360° radiation pattern. The omni-directional pattern is suitable for point-to-multipoint broadcasting in all directions. This antenna is primarily used for WLAN applications. However, it can also be used for a variety of other applications within the specified frequency range. When used as an access point, th e antenna is ideally located at the center of the coverage ar ea. Application Notes Pulse Antennas Takatie 6 90440 K empele Finland Tel: +358 207 935 500 www.pulseeng.com/antennas Exte rnal Antennas Sales Contacts USA858 674 8100 UK44 1483 401 700 France33 3 84 35 04 04 Singapore65 6287 8998 Shanghai86 21 32181071 China86 769 5538070 Taiwan886 2 26980228
REPORT NO: 11CA62504 DATE: MAR 31, 2012 FCC ID: Z5IVSN1 Page 55 of 63 UL LLC. FORM NO: CCSUP4701D 12 Laboratory Drive, Research Triangle Park, NC USA 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL.. MAXIMUM PERMISSIBLE EXPOSURE FCC RULES §1.1310 The criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in §1.1307(b), except in the case of portable devices which shall be evaluated according to the provisions of §2.1093 of this chapter. REPORT NO: 11CA62504 DATE: MAR 31, 2012 FCC ID: Z5IVSN1 Page 56 of 63 UL LLC. FORM NO: CCSUP4701D 12 Laboratory Drive, Research Triangle Park, NC USA 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL.. EQUATIONS Power density is given by: S = EIRP / (4 * Pi * D^2) where S = Power density in W/m^2 EIRP = Equivalent Isotropic Radiated Power in W D = Separation distance in m Power density in units of W/m^2 is converted to units of mWc/m^2 by dividing by 10. Distance is given by: D = SQRT (EIRP / (4 * Pi * S)) where D = Separation distance in m EIRP = Equivalent Isotropic Radiated Power in W S = Power density in W/m^2 For multiple colocated transmitters operating simultaneously in frequency bands where the limit is identical, the total power density is calculated using the total EIRP obtained by summing the Power * Gain product (in linear units) of each transmitter. Total EIRP = (P1 * G1) + (P2 * G2) + ... + (Pn * Pn) where Px = Power of transmitter x Gx = Numeric gain of antenna x In the table(s) below, Power and Gain are entered in units of dBm and dBi respectively and conversions to linear forms are used for the calculations. LIMITS From FCC §1.1310 Table 1 (B), the maximum value of S = 1.0 mW/cm^2 REPORT NO: 11CA62504 DATE: MAR 31, 2012 FCC ID: Z5IVSN1 Page 57 of 63 UL LLC. FORM NO: CCSUP4701D 12 Laboratory Drive, Research Triangle Park, NC USA 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL.. RESULTS Band Separation Distance (cm) Output Power (dBm) Antenna Gain (dBi) EIRP (dBm) Duty Cycle (%) FCC Power Density (mW/cm 2 ) 2400‐2483.5 20 15.85 +2.0 17.85 5.11% 0.00062
NVLAP LAB CODE 200246 FCC CFR47 PART 15 SUBPART C CERTIFICATION TEST REPORT FOR KCF DTS TRANCEIVER MODEL NUMBER: VSN-1 FCC ID: Z5IVSN1 REPORT NUMBER: 11CA62504 ISSUE DATE: MARCH 31, 2012 Prepared for KCF TECHNOLOGIES 336 S FRASER ST. STATE COLLEGE, PA 16801 Prepared by UL LLC (UL) 12 LABORATORY DR RESEARCH TRIANGLE PARK, NC 27709 TEL: (919) 549-1400 REPORT NO: 11CA62504 DATE: MAR 31, 2012 FCC ID: Z5IVSN1 Page 2 of 63 UL LLC. FORM NO: CCSUP4701D 12 Laboratory Drive, Research Triangle Park, NC USA 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL.. Revision History Rev. Issue Date Revisions Revised By -- 3/31/12 Initial Issue Jim Marley REPORT NO: 11CA62504 DATE: MAR 31, 2012 FCC ID: Z5IVSN1 Page 3 of 63 UL LLC. FORM NO: CCSUP4701D 12 Laboratory Drive, Research Triangle Park, NC USA 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL.. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................................ 4 2. TEST METHODOLOGY .................................................................................................................... 5 3. FACILITIES AND ACCREDITATION ................................................................................................ 5 4. CALIBRATION AND UNCERTAINTY .............................................................................................. 5 4.1. MEASURING INSTRUMENT CALIBRATION ............................................................................ 5 4.2. SAMPLE CALCULATION ........................................................................................................... 5 4.3. MEASUREMENT UNCERTAINTY ............................................................................................. 5 5. EQUIPMENT UNDER TEST ............................................................................................................. 6 5.1. DESCRIPTION OF EUT ............................................................................................................. 6 5.2. MAXIMUM OUTPUT POWER .................................................................................................... 6 5.3. DESCRIPTION OF AVAILABLE ANTENNAS ............................................................................ 7 5.4. SOFTWARE AND FIRMWARE .................................................................................................. 7 5.5. WORST-CASE CONFIGURATION AND MODE ........................................................................ 7 5.6. DESCRIPTION OF TEST SETUP .............................................................................................. 8 6. TEST AND MEASUREMENT EQUIPMENT ................................................................................... 10 7. ANTENNA PORT TEST RESULTS ................................................................................................ 12 7.1. DTS EMISSIONS IN THE 2.4 GHz BAND ............................................................................... 12 7.1.1. 6 dB BANDWIDTH ............................................................................................................ 12 7.1.2. 99% BANDWIDTH ............................................................................................................ 16 7.1.3. OUTPUT POWER ............................................................................................................. 20 7.1.4. POWER SPECTRAL DENSITY ........................................................................................ 24 7.1.5. CONDUCTED SPURIOUS EMISSIONS ........................................................................... 28 7.1.6. DUTY CYCLE FACTOR .................................................................................................... 34 8. RADIATED TEST RESULTS .......................................................................................................... 38 8.1. LIMITS AND PROCEDURE ..................................................................................................... 38 8.2. TRANSMITTER 30-1000 MHz ................................................................................................. 39 8.2.1. RADIATED SPURIOUS EMISSIONS ............................................................................... 39 8.3. TRANSMITTER ABOVE 1 GHz ............................................................................................... 43 8.3.1. TRANSMITTER ABOVE 1 GHz – BAND EDGE ............................................................... 43 8.3.1. TRANSMITTER ABOVE 1 GHz – HARMONICS AND SPURIOUS EMISSIONS ............. 47 9. AC POWER LINE CONDUCTED EMISSIONS ............................................................................... 52 REPORT NO: 11CA62504 DATE: MAR 31, 2012 FCC ID: Z5IVSN1 Page 4 of 63 UL LLC. FORM NO: CCSUP4701D 12 Laboratory Drive, Research Triangle Park, NC USA 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL.. 1. ATTESTATION OF TEST RESULTS COMPANY NAME: KCF TECHNOLOGIES 333 S. FRASER ST. STATE COLLEGE, PA 16801, U.S.A. EUT DESCRIPTION: 15.247 Transceiver (2.4-2.4835 GHz) MODEL: VSN-1 SERIAL NUMBER: Sample #S11LB153 DATE TESTED: November 1-11, 2011 APPLICABLE STANDARDS STANDARD TEST RESULTS CFR 47 Part 15 Subpart C Pass Compliance Certification Services (UL CCS) tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by UL CCS based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Note: The results docum…
Text truncated - open the document above for the full version.
REPORT NO: 11CA62504 DATE: MAR 31, 2012 FCC ID: Z5IVSN1 Page 58 of 63 UL LLC. FORM NO: CCSUP4701D 12 Laboratory Drive, Research Triangle Park, NC USA 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL.. SETUP PHOTOS RADIATED RF MEASUREMENT SETUP RADIATED FRONT PHOTO RADIATED BACK PHOTO REPORT NO: 11CA62504 DATE: MAR 31, 2012 FCC ID: Z5IVSN1 Page 59 of 63 UL LLC. FORM NO: CCSUP4701D 12 Laboratory Drive, Research Triangle Park, NC USA 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL.. RADIATED RF MEASUREMENT SETUP FOR PORTABLE CONFIGURATION X-AXIS IS WORST CONFIGURATION X-AXIS FRONT PHOTO (UPRIGHT) REPORT NO: 11CA62504 DATE: MAR 31, 2012 FCC ID: Z5IVSN1 Page 60 of 63 UL LLC. FORM NO: CCSUP4701D 12 Laboratory Drive, Research Triangle Park, NC USA 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL.. Y-AXIS FRONT PHOTO (SIDE) REPORT NO: 11CA62504 DATE: MAR 31, 2012 FCC ID: Z5IVSN1 Page 61 of 63 UL LLC. FORM NO: CCSUP4701D 12 Laboratory Drive, Research Triangle Park, NC USA 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL.. Z-AXIS FRONT PHOTO (FLAT) REPORT NO: 11CA62504 DATE: MAR 31, 2012 FCC ID: Z5IVSN1 Page 62 of 63 UL LLC. FORM NO: CCSUP4701D 12 Laboratory Drive, Research Triangle Park, NC USA 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL.. POWERLINE CONDUCTED EMISSIONS MEASUREMENT SETUP REPORT NO: 11CA62504 DATE: MAR 31, 2012 FCC ID: Z5IVSN1 Page 63 of 63 UL LLC. FORM NO: CCSUP4701D 12 Laboratory Drive, Research Triangle Park, NC USA 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL.. END OF REPORT
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.42 GHz - 2.46 GHz | 38.46 mW |

loT Sensor Hub
Equipment Class
DTS - Digital Transmission System
2.4 GHz Transceiver
Equipment Class
DTS - Digital Transmission System