Z7RBPROPortable Audio

QUICK START GUIDE BRV-PRO 2 3 Full manual and troubleshooting: braven.com/manuals ENG GET TO KNOW YOUR BRAVENTURN ON & BLUETOOTH PAIRING 1. Press the Power button for 2-3 seconds to turn on your BRAVEN (BRV-PRO). Press the same button again for 2-3 seconds to turn your BRAVEN off. 2. Activate Bluetooth ® on the phone or device you are pairing with (see your device’s instruction manual for information on activating its Bluetooth ® settings). 3. Press and hold the Play Button on your BRAVEN until you hear the BRAVEN pairing sound. 4. Go to your phone or device’s Bluetooth ® settings and select “BRAVEN BRV-PRO” from the list. 5. If asked for a passcode enter “0000” Your BRAVEN will remember the last 8 devices it has paired with. NOTE: If your BRAVEN does not have an active Bluetooth ® connection and is left on, it will shut itself off after 30 minutes. To restart your BRAVEN you will need to press and hold the power button for 2-3 seconds. BATTERY INDICATOR LIGHTS POWER SWITCH BATTERY CHECK BUTTON PAIRING / ANSWER-END CALL / PAUSE- RESUME MUSIC REMOVABLE ACCESSORY PLATE POWER / PAIRING STATUS LIGHT BRAVEN CHARGING PORT VOLUME UP / SKIP TRACK (press and hold) EXTERNAL USB CHARGING PORT RESET BUTTON VOLUME DOWN / SKIP BACK (press and hold) 3.5 MM AUDIO-IN JACK 20% - 40% - 60% - 80% - 100% 4 5 Full manual and troubleshooting: braven.com/manuals ENG CHARGING YOUR BRAVEN • Before using your BRAVEN for the first time, charge the unit until all 5 Battery indicator lights are solid (not flashing), indicating a full charge (typically 2 to 3 hours). • To charge your BRAVEN, plug the included USB-to-Micro- USB cable into a wall power adapter (not included) or into a powered USB port on a computer. Plug the Micro-USB connector end of the cable into the BRAVEN charging port. Your BRAVEN is designed to charge USB devices that draw from 0.3A - 1A (most cell phones & mp3 players – tablets and other 2A devices cannot be charged by your BRV-PRO) using the full-sized USB port located behind the cap. To use external charging: 1. Turn your BRAVEN on. 2. Plug the USB power cable that came with your phone, mp3 player, or other mobile device into the USB port on your BRAVEN. 3. Plug the other end of the cable into your mobile device, and it will immediately begin charging. CHARGING EXTERNAL DEVICESSPEAKERPHONE • Press the Answer-End button on your BRAVEN to answer the call over the speaker. Press the Answer-End button again to end the call. • The BRV-PRO is IPX7 Waterproof, and is designed to withstand rainfall, water jets, and water splashing. • IMPORTANT - To ensure your BRAVEN BRV-PRO speaker is prepared for use in a wet environment, remove all cable connections and tightly close the rear water cap. If the water cap is not properly closed, the BRV-PRO will not be water resistant. WATERPROOF FEATURES 6 7 Full manual and troubleshooting: braven.com/manuals ENG WARNINGS, CAUTIONS & LEGAL INFORMATION To reduce the risk of fire or electric shock, do not expose the BRAVEN to rain or moisture while charging. The BRAVEN should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on or near it while being charged or charging other devices. As with any electronic products, use care not to spill liquids into any part of the product. Liquids can cause a failure and/or a fire hazard. The power supply must be used indoors only. Make no modifications to the product or accessories. Unauthorized alterations may compromise safety, regulatory compliance, and system performance, and will void the warranty. Do not place any flame sources, such as lighted candles, on or near the BRAVEN. The BRAVEN contains small parts that may be a choking hazard and is not suitable for children under age 3. Do not continue charging the battery if it does not reach full charge within the specified charging time. Overcharging may cause the battery to become hot, rupture, or ignite. If you see any heat deformation or leakage, properly dispose of the battery. Do not attempt to charge the battery in temperatures outside the range of 32°-104°F (0°-40°C). If the battery begins to leak, do not allow the liquid to come in contact with your skin or eyes. If contact has been made, wash the affected area with plenty of water and seek medical attention immediately. Do not expose the product or battery to excessive heat, including direct sunlight or fire and storage or use inside cars in hot weather, where it can be exposed to temperatures in excess of 115°F (60°C). Doing so may cause the battery and power supply to generate heat, rupture, or ignite. Using the product in this manner also may result in a loss of performance and a shortened life expectancy. Extended exposure to direct sunlight may damage the external appearance and material qualities. Do not step on, throw, or drop batteries or the power supply or device, or expose them to a strong shock. Do not pierce, crush, dent, or deform the batteries or power supply in any way. If either becomes deformed, properly dispose of it. Do not short-circuit batteries. Do not attempt to service the BRAVEN yourself. Opening or removing covers may expose you to dangerous voltages or other hazards and will void the manufacturer’s warranty. To prevent risk of fire or electric shock, avoid overloading wall outlets, extension cords, or integral convenience receptacles. Your Bluetooth device (mobile phone, music player, tablet, laptop, etc.) must support the A2DP Bluetooth profile in order to work wirelessly with your new BRAVEN speaker. The A2DP profile is supported by most recent mobile products with built-in Bluetooth capability. Please refer to your device’s user manual for details and instruction regarding the Bluetooth profiles it supports. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, includin…

Text truncated - open the document above for the full version.

Project No.: 1501C141 Page 2 of 17 Project No.: 1501C141 Page 3 of 17

Matt PET,T=0.2(no the back glue)The single side of gum 3M 9448 DVR NO. Necole Necole 注記： 1、所有零部件都需经超声工程师确定后才可生产. 2、有 標記的尺寸為重要管制(IQC必檢)尺寸. 3、有◆標記的尺寸為客戶重要管制(IQC必檢)尺寸. 4、未標示的尺寸請參照 3D CAD. 5、產品材質應符合RoHS. 6、拔模斜度最大为1,除另行通知外. 7、图中未标注的半径应为0.2mm。 8、材質: 9、表面处理: 10、請使用超聲工程提供的美工稿直接制板. 11、禁止更改客戶的美工稿(不可在客戶的美工稿上作任何修改動作,超聲工程部有書面通知除外). 12、未標注公差的尺寸參照IT15. （重量: 積： mm ） 2 F176-0705C 2015.01.20 Braven BRV-PRO YLBA24386-0001/2 Cover sticker label 0.24g±10% 體 Black ground white printing ANMABRVPR-IB10/20 15 03 4 193 1 Year:change every year Month:change every month 4 for TYM:no need change SKU: 193 for Silver, 194 for Black 1no need change 39.61mm 30.73mm 150341931 150341941 SAPSKUColorPart number ANMABRVPR-IB20193Silve rYLBA24386-0002 ANMABRVPR-IB10194BlackYLBA24386-0001 15 03 4 193 1 FCC ID: Z7RBPRO IC: 10013A-BPRO XXX-XXXXXX Year:change every year Month:change every month 4 for TYM:no need change SKU: 193 for Silver, 194 for Black 1no need change SAPSKUColorPart number ANMABRVPR-IB20193Silve rGALA00670-0001 ANMABRVPR-IB10194BlackGALA00670-0002 Screen print / Pad Print in cool grey 11C on Black and Grey versions.

Project No.: 1501C141 Page 4 of 17 Project No.: 1501C141 Page 5 of 17 Project No.: 1501C141 Page 6 of 17 Project No.: 1501C141 Page 7 of 17 Project No.: 1501C141 Page 8 of 17 Project No.: 1501C141 Page 9 of 17 Project No.: 1501C141 Page 10 of 17 Project No.: 1501C141 Page 11 of 17 Project No.: 1501C141 Page 12 of 17 Project No.: 1501C141 Page 13 of 17 Project No.: 1501C141 Page 14 of 17 Project No.: 1501C141 Page 15 of 17 Project No.: 1501C141 Page 16 of 17 Project No.: 1501C141 Page 17 of 17

Proj Equ Mod App Add Acc FC ject No. uipment del plicant dress cording: B No. TEL: CC RF : 1501C : Portab : BRAV : BRAV : 6001 O States : FCC G C95.1 BT .3, Jinsh Do +86-769 F EXP FCC I C141 ble Audio VEN BRV- VEN LC Oak Can s, 92618 Guideline TL agang 1 ongguan 9-8318-3 Pa POSU D: Z7R o -PRO yon, Irvi es for Hu L I st Road, n, Guang 3000 F age 1 of 2 URE R RBPR ne, Calif uman Ex IN , Shixia, dong, C FAX: +86 REPO O fornia, U xposure I NC Dalang hina. 6-769-83 ORT nited IEEE . To w n , 319-60000 Ta b l e GEN Maxi m Accord 100 M The m at 5mm Conc l for Filed An Ant. 1 NERAL mum measu Output (dB 3.70 ding to FCC MHz – 6 GHz maximum me m distance. lusion: No ntenna Manufactur CONCU ured transm tPower Bm) 0 C KDB4474 z and ≤ 50 easured ou SAR eval u rer Mod ULUSIO itter power: Output P (mW 2.34 98 V05, Ap mm tput peak p uation requ P a del Name N/A N: Power W) 4 ppendix A, S power of this uired since age 2 of 2 Antenna T Folded D Limit (mW 10 SAR Test E s EUT is 2.3 transmitte TypeCon Dipole W) xclusion Th 34mW, less er power is nnector Ga N/A - hresholds fo s than 10mW below FCC ain(dBi) -0.087 or W C threshold d

Report No.: BTL-FICP-1-1501C141 Page 1 of 109 FCC&IC Radio Test Report FCC ID: Z7RBPRO IC: 10013A-BPRO This report concerns (check one): Original Grant Class II Change Project No. : 1501C141 Equipment : Portable Audio Model Name : BRAVEN BRV-PRO Applicant : BRAVEN LC Address : 6001 Oak Canyon, Irvine, California, United States, 92618 Date of Receipt : Jan. 21, 2015 Date of Test : Jan. 21, 2015~ Jan. 30, 2015 Issued Date : Feb. 02, 2015 Tested by : BTL Inc. Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) BTL INC. No.3, Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, Guangdong, China. TEL: +86-769-8318-3000 FAX: +86-769-8319-6000 Report No.: BTL-FICP-1-1501C141 Page 2 of 109 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of Standards and Technology (NIST) of U.S.A. BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. BTL’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and BTL-self, extracts from the test report shall not be reproduced except in full with BTL’s authorized written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Report No.: BTL-FICP-1-1501C141 Page 3 of 109 Table of Contents Page 1 . CERTIFICATION 7 2 . SUMMARY OF TEST RESULTS 8 2.1 TEST FACILITY 9 2.2 MEASUREMENT UNCERTAINTY 9 3 . GENERAL INFORMATION 10 3.1 GENERAL DESCRIPTION OF EUT 10 3.2 DESCRIPTION OF TEST MODES 12 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 12 3.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 13 3.5 DESCRIPTION OF SUPPORT UNITS 13 4 . EMC EMISSION TEST 14 4.1 CONDUCTED EMISSION MEASUREMENT 14 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 4.1.2 TEST PROCEDURE 14 4.1.3 DEVIATION FROM TEST STANDARD 14 4.1.4 TEST SETUP 15 4.1.5 EUT OPERATING CONDITIONS 15 4.1.6 EUT TEST CONDITIONS 15 4.1.7 TEST RESULTS 15 4.2 RADIATED EMISSION MEASUREMENT 16 4.2.1 RADIATED EMISSION LIMITS 16 4.2.2 TEST PROCEDURE 17 4.2.3 DEVIATION FROM TEST STANDARD 17 4.2.4 TEST SETUP 18 4.2.5 EUT OPERATING CONDITIONS 19 4.2.6 EUT TEST CONDITIONS 19 4.2.7 TEST RESULTS (9KHZ TO 30MHZ) 19 4.2.8 TEST RESULTS (BETWEEN 30MHZ TO 1000 MHZ) 20 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 20 5 . NUMBER OF HOPPING CHANNEL 21 5.1 APPLIED PROCEDURES 21 5.1.1 TEST PROCEDURE 21 5.1.2 DEVIATION FROM STANDARD 21 5.1.3 TEST SETUP 21 5.1.4 EUT OPERATION CONDITIONS 21 5.1.5 EUT TEST CONDITIONS 21 5.1.6 TEST RESULTS 21 Report No.: BTL-FICP-1-1501C141 Page 4 of 109 Table of Contents Page 6 . AVERAGE TIME OF OCCUPANCY 22 6.1 APPLIED PROCEDURES / LIMIT 22 6.1.1 TEST PROCEDURE 22 6.1.2 DEVIATION FROM STANDARD 22 6.1.3 TEST SETUP 22 6.1.4 EUT OPERATION CONDITIONS 23 6.1.5 EUT TEST CONDITIONS 23 6.1.6 TEST RESULTS 23 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 24 7.1 APPLIED PROCEDURES / LIMIT 24 7.1.1 TEST PROCEDURE 24 7.1.2 DEVIATION FROM STANDARD 24 7.1.3 TEST SETUP 24 7.1.4 EUT TEST CONDITIONS 24 7.1.5 TEST RESULTS 24 8 . BANDWIDTH TEST 25 8.1 APPLIED PROCEDURES 25 8.1.1 TEST PROCEDURE 25 8.1.2 DEVIATION FROM STANDARD 25 8.1.3 TEST SETUP 25 8.1.4 EUT OPERATION CONDITIONS 25 8.1.5 EUT TEST CONDITIONS 25 8.1.6 TEST RESULTS 25 9 . PEAK OUTPUT POWER TEST 26 9.1 APPLIED PROCEDURES / LIMIT 26 9.1.1 TEST PROCEDURE 26 9.1.2 DEVIATION FROM STANDARD 26 9.1.3 TEST SETUP 26 9.1.4 EUT OPERATION CONDITIONS 26 9.1.5 EUT TEST CONDITIONS 26 9.1.6 TEST RESULTS 26 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 27 10.1 APPLIED PROCEDURES / LIMIT 27 10.1.1 TEST PROCEDURE 27 10.1.2 DEVIATION FROM STANDARD 27 10.1.3 TEST SETUP 27 10.1.4 EUT OPERATION CONDITIONS 27 10.1.5 EUT TEST CONDITIONS 27 10.1.6 TEST RESULTS 27 11 . MEASUREMENT INSTRUMENTS LIST 28 Report No.: BTL-FICP-1-1501C141 Page 5 of 109 Table of Contents Page 12 . EUT TEST PHOTO 30 ATTACHMENT A - CONDUCTED EMISSION 34 ATTACHMENT B - RADIATED EMISSION (9KHZ-30MHZ) 37 ATTACHMENT C - RADIATED EMISSION (30MHZ TO 1000MHZ) 39 ATTACHMENT D - RADIATED EMISSION (ABOVE 1000MHZ) 46 ATTACHMENT E - NUMBER OF HOPPING CHANNEL 71 ATTACHMENT F - AVERAGE TIME OF OCCUPANCY 73 ATTACHMENT G - HOPPING CHANNEL SEPARATION MEASUREMENT 86 ATTACHMENT H - BANDWIDTH 91 ATTACHMENT I - PEAK OUTPUT POWER 96 ATTACHMENT J - ANTENNA CONDUCTED SPURIOUS EMISSION 101 Report No.: BTL-FICP-1-1501C141 Page 6 of 109 REPORT ISSUED HISTORY Issued No. Description Issued Date BTL-FICP-1-1501C141 Original Issue. Feb. 02, 2015 Report No.: BTL-FICP-1-1501C141 Page 7 of 109 1. CERTIFICATION Equipment : Portable Audio Brand Name : BRAVEN Model Name : BRAVEN BRV-PRO Applicant BRAVEN LC Manufacturer : BRAVEN LC Address : 6001 Oak Canyon, Irvine, California, United States, 92618 Factory : Premium Loudspeakers (HuiZhou) Co. Ltd Address : Tymphany Industrial Area, Xin Lian Village, Xin Xu Town, Hui Yang District, Hui Zhou City, Guangdong, China Date of Test : Jan. 21, 2015~ Jan. 30, 2015 Test Sample : ENGINEERING SAMPLE Standard(s ) : FCC Part15, Subpart C : 2013 (15.247) / ANSI C63.4 : 2009 / FCC Public Notice DA 00-705, March 30, 2000. Canada RSS-210: 2010 R…

Text truncated - open the document above for the full version.

Report No.: BTL-FICP-1-1501C141 Page 30 of 109 12. EUT TEST PHOTO Conducted Measurement Photos Report No.: BTL-FICP-1-1501C141 Page 31 of 109 Radiated Measurement Photos 9KHz to 30MHz Report No.: BTL-FICP-1-1501C141 Page 32 of 109 Radiated Measurement Photos 30MHz to 1000MHz Report No.: BTL-FICP-1-1501C141 Page 33 of 109 Radiated Measurement Photos Above 1000MHz