Z87ABBAS2IMobile phone

1 . S2i GSM mobile phone User Manual 2 1 Prior to use Icon Explain Said SIM card a network signal strength, bar a few more stronger the signal Said SIM Card 2 network signal strength, as amended, the stronger the more the signal。 The battery capacity ,be the number of the more power the more adequate. Alarm clock opening, if the alarm set off, will not be displayed. Keypad lock is activated SIM card 1 has unread messages SIM card 2 has unread messages SIM card adapter 1 unconditional SIM card adapter 2 unconditional Background music play SIM card 1missed calls SIM card 2 missed calls General pattern Conference mode Outdoor mode 3 Silent mode 2 Function menu 3.1 Fast functional use „ standby mode, click the "Menu" on access to main menu interface; click on the "right soft key" to access the phonebook list interface; select numbers for direct access by dialing key on the dial-up interface。 „ all main menu or sub menu interface, click on the appropriate menu icon to the desired function into the options。 „ In the standby interface can be up and down left and right arrow keys to enter the corresponding shortcut menu. (Respectively shortcuts, alarm clock, camera, write text messages.) „ In the function menu, under normal circumstances, you can press the hold button return to the standby state。 .2 Information center 3.2.1 SMS You can send and receive short message service center free text messages in chinese english, the phone supports enhanced messaging (EMS),you can insert a picture in the short message, animations, ring tones, can also use the templates to produce short information. and music information。 3.2.1.2 Inbox Enter the Write box menu to view the text messages had been received. Received under non-idle screen a short message, the phone will issue a vibration (if the ring is set to vibration mode) or tone (if the ringing mode is set to ring), the screen prompts received news。If you do not want to immediately read out of the interface after the icon will display a short message area icon, and received a short message priority Cunzai SIM card, until the SIM card is full, change deposit to your phone. To read the new information, you can enter the inbox list, click "OK" to read the new text messages。 4 Delete current text messages. Editor: Receive information on current editor. Tr a n s mi t: Edited with an option to send to one person or group to send multi-send. Copy to phone: Copy to SIM card: does not appear。 Move to mobile Move to SIM card Chat: Y Remove all: Copy all Use numbers The sender number and the current text message number (3-40 digits) is extracted to the list displayed, select any one of which can be dial-up or save operation 3.2.1.3 outbox Into the outbox list to view your saved in the machine (including the SIM card and mobile phone) text messages. Messages in the outbox view details, click on “options” content with the inbox. 3.2.1.5 Message setting Using the short message function , you need to do the appropriate setting, go to settings sub-menu, you can select the following settings. Note: the validity of the information and fax, pager, e-mail needs of network operators to support implementation。 „ Status settings: on the news report, set back path. If you click on "Open" then open the options menu; If you then click "Close" then turn this option off feature。 Note: this feature requires network operators to support implementation.。 5 Select SIM card or mobile phone. 3.2.2 Multimedia message Through the MMS service, you can send voice and text contain pictures, news. z Inbox This menu allows you to view your received MMS. select a multimedia message. enter the following options (Note: MMS messages and text messages are in the same inbox view.) View: view MMS content SMS Re: reply with SMS . 3.2.3 Chat Set the number and chat. 3.2.4 Voice mail — SIM card a language-mail: edit SIM card 1,voice mail numbers. — SIM card 2 language-mail: edit SIM card 2,the voice mailbox number. 3.2.5 Cell Broadcast — SIM card 1 cell broadcast: edit SIM card 1,cell broadcast. — SIM card 2 cell broadcast : edit the SIM card 2,cell broadcast. Network operators need to provide this service. 3.3 Call center 3.3.1 Call history 3.3.1.1 Missed calls Send SMS send a short message to the number. Send MMS send MMS to the number. 3.3.1.2 Dialed In view dialed details, click on “Options” content does not answer the phone . 3.3.1.3 Received calls To enter the phone menu, display the current record has been received cell phone telephone numbers list. In view the phone details, click on “options” content with the missed call. 3.3.1.4 Delete call records 3.3.1.5 Call duration „ Last call time 6 show the length of time the last phone call. „ Dialed a total of Display dialed the total length of time. „ Has a total phone. Show the total time to answer the phone the length of time. „ Zero all the time Records of these three with zero time. 3.3.1.6 Call Accounting Click “ok” to enter the call billing sub-menu,can view records of phone call charges to date. „ Last call cost View last call billing. „ All call charges View all calls total billing. „ Zero call costs. Enter the PIN2 code for the removal of call billing records. „ Cost limits By entering the PIN2 code to read, modify or cancel the function.。 „ Prices and exchange rates 3.3.1.7 SMS Counter Enter the submenu ,you can view the current has been sent and received ,the number of short messages。 7 FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of th…

Text truncated - open the document above for the full version.

ABBA INNOVATIONS.A.S 2013-01-30 Attn: Director of Certification Authority to Act as Agent Dear Sir/Madam, We, ABBA INNOVATIONS.A.S hereby authorize China Certification & Inspection Services Co., Ltd.1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China Bruce.Zhang, to act as our agent in the preparation of FCC application for the following project(s): Mobile Phone S2, S3, S2i, Q3, S5, S7, Q6 We affirm that submitted documents have properly described the device or system and each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will be affixed to a label submitted for approval with this application. Dated this 2013-01-30 Agency agreement expiration date: 2014-01-30 By: Ernesto Sequera Signature Printed Title: Manager On behalf of : ABBA INNOVATIONS.A.S Telephone: 57-5-3608855

Report No:CCIS13010000601 China Certification & Inspection Services Co., Ltd. Project No.: CCIS130100006RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 38 of 50 8 EUT Constructional Details Report No:CCIS13010000601 China Certification & Inspection Services Co., Ltd. Project No.: CCIS130100006RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 39 of 50 Report No:CCIS13010000601 China Certification & Inspection Services Co., Ltd. Project No.: CCIS130100006RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 40 of 50 Report No:CCIS13010000601 China Certification & Inspection Services Co., Ltd. Project No.: CCIS130100006RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 41 of 50 Report No:CCIS13010000601 China Certification & Inspection Services Co., Ltd. Project No.: CCIS130100006RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 42 of 50

Size：25mm X18 mm Label Location

Report No:CCIS13010000601 China Certification & Inspection Services Co., Ltd. Project No.: CCIS130100006RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 43 of 50 Report No:CCIS13010000601 China Certification & Inspection Services Co., Ltd. Project No.: CCIS130100006RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 44 of 50 Report No:CCIS13010000601 China Certification & Inspection Services Co., Ltd. Project No.: CCIS130100006RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 45 of 50 Report No:CCIS13010000601 China Certification & Inspection Services Co., Ltd. Project No.: CCIS130100006RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 46 of 50 Report No:CCIS13010000601 China Certification & Inspection Services Co., Ltd. Project No.: CCIS130100006RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 47 of 50 Report No:CCIS13010000601 China Certification & Inspection Services Co., Ltd. Project No.: CCIS130100006RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 48 of 50 Report No:CCIS13010000601 China Certification & Inspection Services Co., Ltd. Project No.: CCIS130100006RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 49 of 50 Report No:CCIS13010000601 China Certification & Inspection Services Co., Ltd. Project No.: CCIS130100006RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 50 of 50 ------End of report------

GCCT No.130104-R1 Page 1 of 88 FCC SAR TEST REPORT No. 130104-R1 for ABBA INNOVATIONS.A.S Mobile phone Model Name: S2i,S2,S3,Q3,S5,S7,Q6 FCC ID : Z87ABBAS2I Issued Date: 2013-01-30 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of GCCT. Test Laboratory: GCCT, Guangdong Telecommunications Terminal Products Quality Supervision and Testing Center Technology Road, High-tech Zone, He Yuan City, Guang Dong Province, PR China 517001 Tel:+86(0)762-3607139, Fax:+86(0)762-3603336 Email: [email protected]. www.ncct.org.cn Trade Mark:Taxcel, yaddas, airus, tellme GCCT No.130104-R1 Page 2 of 88 TABLE OF CONTENTS 1. General Information ............................................................................ 4 1.1 Testing Laboratory ...................................................................... 4 1.2 Application Information ............................................................... 4 1.3 Manufacturer Information............................................................ 4 1.4 EUT Information.......................................................................... 5 2. EUT Operational Conditions During Test............................................ 6 2.1 General Description of Test Procedures..................................... 6 2.2 GSM Test Configuration ............................................................. 6 3. SAR Measurements System Configuration......................................... 7 3.1 Measurement System Diagram .................................................. 7 3.2 System Components................................................................... 8 3.3 Equivalent Tissues.................................................................... 11 4. Evaluation Procedures...................................................................... 12 4.1 Data Evaluation......................................................................... 12 4.2 SAR Evaluation Procedures ..................................................... 13 4.3 Spatial Peak SAR Evaluation.................................................... 14 5. Test Laboratory Environment............................................................ 16 6. Conducted Output Power Measurement........................................... 17 7. SAR Measurement Results............................................................... 18 7.1 Liquid Measurement Results .................................................... 18 7.2 System Performance Check ..................................................... 19 7.3 Measurement Results ............................................................... 21 8. Measurement Uncertainty ................................................................. 23 9. EUT Photo ........................................................................................ 24 10. Equipment List & Calibration Status ............................................ 26 11. Attachments................................................................................. 27 ANNEXE 1 System Performance Check Plots ....................................... 28 ANNEXE 2 SAR Test Plots .................................................................... 32 ANNEXE 3 EUT Test Positions .............................................................. 52 ANNEXE 4 Probe calibration report ....................................................... 54 ANNEXE 5 Dipole calibration report....................................................... 66 ANNEXE 6 DAE calibration report ......................................................... 83 GCCT No.130104-R1 Page 3 of 88 GENERAL SUMMARY Product Name Mobile phone Model Name S2i,S2,S3,Q3,S5,S7,Q6 Applicant ABBA INNOVATIONS.A.S Manufacturer MOVICOM TECHNOLOGY CO.,LIMITED Test laboratory GCCT, Guangdong Telecommunications Terminal Products Quality Supervision and Testing Center Reference Standards OET Bulletin 65 (Edition 97-01) and Supplement C (Edition 01-01): Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits IEEE Std C95.1, 1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz IEEE 1528-2003: Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental Techniques FCC KDB 447498 D01 v05: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies FCC KDB 865664 D01 v01: SAR Measurement Requirements for 100 MHz to 6 GHz IEC 62209-1: 2006: Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Human models, instrumentation, and procedures, Part 1: Procedure to determine the specific absorption rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz) IEC 62209-2: 2010: Human exposure to radio frequency fields from handheld and body-mounted wireless communication devices - Human models, instrumentation, and procedures, Part 2: Procedure to determine the specific absorption rate (SAR) for mobile wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) Test Conclusion This portable wireless equipment has been measured in all cases requested by the relevant standards. Test results in Chapter 7 of this test report are below limits specified in the relevant standards. General Judgment: Pass Date of issue:2013.01.30 Comment: The test results in this report apply only to the tested sample of the stated device/equipment. Approved by: Reviewed by: Tested by: Deputy Manager Deputy Manager Test Engineer GCCT No.130104-R1 Page 4 of 88 1. General Information 1.1 Testing Laboratory Company GCCT, Guangdong Telecommunications Terminal Products Quality Supervision and Testing Center Address Technolo…

Text truncated - open the document above for the full version.

China Certification & Inspection Services Co., Ltd. Report No: CCIS13010000602 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1 Cover Page FCC REPORT (Bluetooth) Applicant: ABBA INNOVATIONS.A.S Address of Applicant: Calle 76 No. 52-40 Local 1 Alto Prado Barranquilla Colombia Equipment Under Test (EUT) Product Name: Mobile Phone Trade Mark: Taxcel, yaddas ,airus, tellme Model No.: S2, S3, S2i, Q3, S5, S7, Q6 FCC ID: Z87ABBAS2I Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247:2011 Date of sample receipt: 15 Jan., 2013 Date of Test: 16-24 Jan., 2013 Date of report issued: 25 Jan., 2013 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No: CCIS13010000602 China Certification & Inspection Services Co., Ltd. Project No.: CCIS130100006RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 36 Version Version No. Date Description 00 25 Jan., 2013 Original Prepared By: Date: 25 Jan., 2013 Report Clerk Check By: Date: 25 Jan., 2013 Project Engineer Report No: CCIS13010000602 China Certification & Inspection Services Co., Ltd. Project No.: CCIS130100006RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 36 2 Contents Page 1 COVER PAGE..............................................................................................................................................................1 2 CONTENTS...................................................................................................................................................................3 3 TEST SUMMARY.........................................................................................................................................................4 4 GENERAL INFORMATION........................................................................................................................................5 4.1 CLIENT INFORMATION................................................................................................................................................. 5 4.2 GENERAL DESCRIPTION OF E.U.T. .............................................................................................................................. 5 4.3 TEST MODE.................................................................................................................................................................. 7 4.4 TEST FACILITY............................................................................................................................................................ 7 4.5 TEST LOCATION.......................................................................................................................................................... 7 4.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER............................................................................................... 7 4.7 TEST INSTRUMENTS LIST............................................................................................................................................. 8 5 TEST RESULTS AND MEASUREMENT DATA.....................................................................................................9 5.1 ANTENNA REQUIREMENT: ........................................................................................................................................... 9 5.2 CONDUCTED EMISSIONS............................................................................................................................................ 10 5.3 CONDUCTED OUTPUT POWER................................................................................................................................... 13 5.4 20DB OCCUPY BANDWIDTH...................................................................................................................................... 15 5.5 CARRIER FREQUENCIES SEPARATION........................................................................................................................ 17 5.6 HOPPING CHANNEL NUMBER.................................................................................................................................... 20 5.7 DWELL TIME............................................................................................................................................................. 21 5.8 PSEUDORANDOM FREQUENCY HOPPING SEQUENCE.................................................................................................. 23 5.9 BAND EDGE.............................................................................................................................................................. 24 5.9.1 Conducted Emission Method..................…

Text truncated - open the document above for the full version.

Report No: CCIS13010000602 China Certification & Inspection Services Co., Ltd. Project No.: CCIS130100006RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 35 of 37 6 Test Setup Photo Radiated Spurious Emission Report No: CCIS13010000602 China Certification & Inspection Services Co., Ltd. Project No.: CCIS130100006RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 36 of 37 Conducted Emission