ZAT-1312PSIP-3CC1312PSIP

Texas Instruments Incorporated 12500 TI Boulevard, DALLAS, Texas, United States 75243 Tel: 2145672462 ; Fax: +4722958546 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Certification designating a U.S. agent for service of process pursuant to Part 2.911(d)(7) To whom it may concern, Texas Instruments Incorporated, Grantee Code ZAT, FRN 0020623971] (“the applicant”) certifies that, as of the date of the filing of application, CT Corporation Systems (“the agent”) is designated as the U.S. agent for the purpose of accepting service of process on behalf of the applicant. The physical U.S. address, email for the designated agent are: Physical U.S. address: The Corporation Trust Company 1209 Orange Street Wilmington, DE 19801 Email [email protected] The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The agent accepts the designation by (the applicant) as the U.S. agent to receive and forward service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. Signed by the Applicant Signed by the Agent (if different from the Applicant) Name: Texas Instruments Incorporated Name: Eric Carlson Title: Product Line Manager, Connectivity Title: Assistant Secretary Email: [email protected] TEL: +4793696595 TEL: 214-979-1172 Date: June 22, 2023 Date: June 22, 2023 DocuSign Envelope ID: 84C3872A-8723-45B5-9998-632DD366339F

Texas Instruments Incorporated. 12500 TI Boulevard, DALLAS, Texas, United States 75243 Tel: 2145672462 ; Fax: +4722958546 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: April 25, 2024 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) To whom it may concern, Texas Instruments Incorporated (“the applicant”) certifies that the equipment [FCC ID: ZAT-1312PSIP-3] for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Texas Instruments Incorporated (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, ________________________ Name: Marian Kost Title: Vice President and Business Unit Manager, Connectivity E-mail: [email protected] DocuSign Envelope ID: 9CF47AD4-B1ED-4E2B-9F57-E3AB96F30658

September 21, 2021 To: Peder Rand From: Marian Kost Subj: Delegation of Authority Under our corporate policy, all delegations are to be made to positions rather than individuals. Therefore, this delegation applies to you while you hold the position listed and will immediately terminate as to you if you change jobs or leave TI. The delegation will continue to be effective as to any employee assuming the position listed above. Commitment Authorizations Authorization is hereby granted to the employee holding the following position to approve and sign on behalf of Texas Instruments Incorporated all contracts, agreements, bids, quotations, purchase orders and other instruments evidencing commitments of Texas Instruments Incorporated within the usual conduct of his/her organization, limited to the amount shown. You are personally responsible to ensure that you exercise the authority consistent with this document and TI’s corporate procedures. Sub-1 GHz Business Manager $1,000,000 Delegation of Commitment Authorizations You may not re-delegate your authority. You may re-delegate your authority on an “acting for” basis or through issuance of “one shots,” as described in SP&P 11-03-01. Marian Kost Business Unit Manager, Connectivity Texas Instruments Incorporated DocuSign Envelope ID: FD4A24EF-51D5-4269-B549-7865596A09AA

Texas Instruments Incorporated 12500 TI Boulevard, DALLAS, Texas, United States 75243 Tel: 2145672462 ; Fax: +4722958546 Date: April 25, 2024 FCC Laboratory 7435 Oakland Mills Rd Columbia MD 21046 Subject: Request for Confidentiality FCC ID: ZAT-1312PSIP-3 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following documents from public disclosure indefinitely.  Schematic Diagram  Block Diagram  Part List  Operational Description  Tune-up Procedure Above mentioned documents which contain detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we are requesting the Commission to withhold the following documents for 180 days after the grant of equipment authorization is issued:  External Photos  Internal Photos  Test Setup Photos  User Manual It is our understanding that all measurement test reports, FCC ID label format cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, _______________________ Name: Marian Kost Title: Vice President and Business Unit Manager, Connectivity E-mail: [email protected] DocuSign Envelope ID: 9CF47AD4-B1ED-4E2B-9F57-E3AB96F30658

Texas Instruments Incorporated 12500 TI Boulevard, DALLAS, Texas, United States 75243 Tel: 2145672462 ; Fax: +4722958546 Date: April 25, 2024 Request for Modular Approval for FCC ID: ZAT-1312PSIP-3 Item Requirements EUT 1. The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly The module is equipped with its own sputter shielding and cannot be removed by the customer 2. The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal The module has buffer modulation / data inputs. 3. The module must contain power supply regulation on the module The module has its own power supply regulation. 4. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§ 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) The requirements of the antenna(s) and spurious emission have been fulfilled. Please refer to the test report and the integrator instruction of this filing. 5. The module must demonstrate compliance in a stand-alone configuration The module was tested on a stand-alone evaluation board and it’s not inside of another device during testing 6. The module must be labeled with its permanently affixed FCC ID label, or use an electronic display For OEM integration the integration manual contains labelling instructions for the host device per part 15.212(vi) as the module is too small to hold its FCC ID on the shield. 7. The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee The module approved transmitter complies with all applicable rules and the integration manual contains any specific requirements addressed to the integrator and/or to the end-user of the final end-product. 8. The module must comply with RF exposure requirements The module complies with the FCC RF exposure requirements for fixed and mobile applications. RF exposure is addressed in the RF exposure exhibit. ______________________ Name: Marian Kost Title: Vice President and Business Unit Manager, Connectivity E-mail: [email protected] DocuSign Envelope ID: 9CF47AD4-B1ED-4E2B-9F57-E3AB96F30658

Texas Instruments Incorporated 12500 TI Boulevard, DALLAS, Texas, United States 75243 Tel: 2145672462 ; Fax: +4722958546 FCC Agent Authorization Date: April 25, 2024 To whom it may concern, Texas Instruments Incorporated hereby authorize Sporton International Inc. to act on our behalf in all matters relating to applications for FCC equipment authorization, including the signing of all documents relating to these matters. Any and all acts carried out by Sporton International Inc. on our behalf shall have the same effect as acts of our own. We also hereby certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits that includes FCC benefits pursuant to section 5301 of the Anti- Drug Abuse Act of 1988. 21 U.S.C. 862. This authorization is limited to the product of as following: FCC ID: ZAT-1312PSIP-3 This authorization is valid until further written notice from Texas Instruments Incorporated. Sincerely, ________________________ Name: Marian Kost Title: Vice President and Business Unit Manager, Connectivity E-mail: [email protected] DocuSign Envelope ID: 9CF47AD4-B1ED-4E2B-9F57-E3AB96F30658

TEL : 886-3-327-3456 Page : 1 of 5 FAX : 886-3-328-4978 Issued Date : May 06, 2024 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA341305-02 RF EXPOSURE EVALUATION REPORT FCC ID : ZAT-1312PSIP-3 Equipment : CC1312PSIP Brand Name : Texas Instruments Model Name : CC1312PSIPMOT3 Applicant : Texas Instruments Incorporated 12500 TI BLVD., Dallas, Texas, 75243 Manufacturer : Texas Instruments Incorporated 12500 TI BLVD., Dallas, Texas, 75243 Standard : 47 CFR Part 2.1091 We, SPORTON INTERNATIONAL INC has been evaluated this product in accordance with 47 CFR Part2.1091 and it complies with applicable limit. Sporton Lab is accredited to ISO 17025 by Taiwan Accreditation Foundation (TAF code: 1190) and the FCC designation No. TW1190 under the FCC 2.948(e) by Mutual Recognition Agreement (MRA) in FCC evaluation. The results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Laboratory, the test report shall not be reproduced except in full SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) Approved by: Cona Huang / Deputy Manager TEL : 886-3-327-3456 Page : 2 of 5 FAX : 886-3-328-4978 Issued Date : May 06, 2024 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA341305-02 Table of Contents 1. DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................................................. 4 2. MAXIMUM RF AVERAGE OUTPUT POWER AMONG PRODUCTION UNITS ........................................ 4 3. RF EXPOSURE LIMIT INTRODUCTION .................................................................................................... 5 4. RADIO FREQUENCY RADIATION EXPOSURE EVALUATION ............................................................... 5 4.1. Standalone Power Density Calculation ............................................................................................. 5 TEL : 886-3-327-3456 Page : 3 of 5 FAX : 886-3-328-4978 Issued Date : May 06, 2024 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA341305-02 History of this test report Report No. Version Description Issued Date FA341305-02 Rev. 01 Initial issue of report Feb. 7, 2024 FA341305-02 Rev. 02 Updtae FCC ID May 06, 2024 TEL : 886-3-327-3456 Page : 4 of 5 FAX : 886-3-328-4978 Issued Date : May 06, 2024 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA341305-02 1. Description of Equipment Under Test (EUT) Product Feature & Specification EUT Type CC1312PSIP Brand Name Texas Instruments Model Name CC1312PSIPMOT3 FCC ID ZAT-1312PSIP-3 Wireless Technology and Frequency Range MIOTY: 902 MHz ~ 928 MHz WB-DSSS: 902 MHz ~ 928 MHz TI 15.4: 902 MHz ~ 928 MHz Wi-SUN: 902 MHz ~ 928 MHz PowerG PHY: 902 MHz ~ 928 MHz Mode MIOTY:GMSK, 2380bit/s (yields a 20dB bandwidth of ~3.1kHz) WB-DSSS: 30 kbps (480 ksps), 195 kHz Deviation, 2-GFSK, 784 kHz RX Bandwidth, FEC = 1.2, DSSS = 1:8 TI 15.4: 50 kbps, 25 kHz Deviation, 2-GFSK, 98 kHz RX Bandwidth Wi-SUN: 100 kbps, 25 kHz Deviation, 2- GFSK, 137kHz RX Bandwidth PowerG PHY: 50 kbps, GFSK, 25 kHz Deviation Reviewed by: Jason Wang Report Producer: Daisy Peng Antenna Information Brand Antenna Type Model 915MHz Gain 1 TI Integrated PCB antenna LP-EM-CC1312PSIP antenna +2.69 dBi 2 Kaadas Flexi PCB antenna K1 -5.82 dBi 3 Leederson Integrated PCB antenna L1 -4.51 dBi 4 Leederson Integrated PCB antenna L2 -1.83 dBi 5 Leederson Stanced antenna L3 -9.48 dBi 6 Leederson Stanced antenna L4 +0.37 dBi 7 Leederson Integrated PCB antenna L5 -1.74 dBi 8 Pulse External whip antenna W5017 +0.90 dBi 9 Johanson Technology Chip antenna 0900AT43A0070 -0.50 dBi 10 Johanson Technology Chip antenna 0915AT43A0026 +1.0 dBi 11 Pulse Wire antenna W3113 +0.80 dBi 2. Maximum RF average output power among production units Mode Maximum Average power(dBm) MIOTY 19.5 WB-DSSS 15 TI 15.4 19 Wi-SUN 19 PowerG PHY 20 14 TEL : 886-3-327-3456 Page : 5 of 5 FAX : 886-3-328-4978 Issued Date : May 06, 2024 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA341305-02 3. RF Exposure Limit Introduction According to ANSI/IEEE C95.1-1992, the criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio frequency (RF) radiation as specified in §1.1310. The MPE was calculated at 20 cm to show compliance with the power density limit. The following formula was used to calculate the Power Density: 퐒= 퐏퐆 ퟒ훑퐑 ퟐ Where: S = Power Density P = Output Power at Antenna Terminals G = Gain of Transmit Antenna (linear gain) R = Distance from Transmitting Antenna 4. Radio Frequency Radiation Exposure Evaluation 4.1. Standalone Power Density Calculation Band Antenna Gain (dBi) Maximum Power (dBm) Maximum EIRP (dBm) Maximum EIRP (W) Average EIRP (mW) Power Density at 20cm (mW/cm^2) Limit (mW/cm^2) MIOTY 2.69 19.50 22.2 0.17 165.58 0.033 0.601 WB-DSSS 2.69 15.00 17.7 0.06 58.75 0.012 0.601 TI 15.4 2.69 19.00 21.7 0.15 147.57 0.029 0.601 Wi-SUN 2.69 19.00 21.7 0.15 147.57 0.029 0.601 PowerG PHY 2.69 20.00 22.7 0.19 185.78 0.037 0.601 Conclusion: According to 47 CFR §2.1091, the RF exposure analysis concludes that the RF Exposure is FCC compliant.

TEL : 886-3-327-0868 Page Number : 1 of 24 FAX : 886-3-327-0855 Issue Date : May 09, 2024 Report Template No.: BU5-FR15CBT4.0 Version 2.4 Report Version : 03 FCC RADIO TEST REPORT Report No. : FR341305-02A FCC RADIO TEST REPORT FCC ID : ZAT-1312PSIP-3 Equipment : CC1312PSIP Brand Name : Texas Instruments Model Name : CC1312PSIPMOT3 Applicant : Texas Instruments Incorporated 12500 TI BLVD., Dallas, Texas, 75243 Manufacturer : Texas Instruments Incorporated 12500 TI BLVD., Dallas, Texas, 75243 Standard : FCC Part 15 Subpart C §15.247 The product was received on Sep. 27, 2023 and testing was performed from Oct. 03, 2023 to Dec. 04, 2023. We, Sporton International Inc. Wensan Laboratory, would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval from Sporton International Inc. Wensan Laboratory, the test report shall not be reproduced except in full. Approved by: Louis Wu Sporton International Inc. Wensan Laboratory No.58, Aly. 75, Ln. 564, Wenhua 3rd, Rd., Guishan Dist., Taoyuan City 333010, Taiwan (R.O.C.) TEL : 886-3-327-0868 Page Number : 2 of 24 FAX : 886-3-327-0855 Issue Date : May 09, 2024 Report Template No.: BU5-FR15CBT4.0 Version 2.4 Report Version : 03 FCC RADIO TEST REPORT Report No. : FR341305-02A Table of Contents History of this test report ................................................................................................................................. 3 Summary of Test Result................................................................................................................................... 4 1 General Description ................................................................................................................................... 5 1.1 Product Feature of Equipment Under Test ........................................................................................ 5 1.2 Modification of EUT ........................................................................................................................... 5 1.3 Testing Location ................................................................................................................................ 6 1.4 Applicable Standards ......................................................................................................................... 6 2 Test Configuration of Equipment Under Test ......................................................................................... 7 2.1 Carrier Frequency Channel ............................................................................................................... 7 2.2 Test Mode .......................................................................................................................................... 7 2.3 Connection Diagram of Test System ................................................................................................. 8 2.4 Support Unit used in test configuration and system .......................................................................... 8 2.5 EUT Operation Test Setup ................................................................................................................ 9 2.6 Measurement Results Explanation Example ..................................................................................... 9 3 Test Result ................................................................................................................................................ 10 3.1 6dB and 99% Bandwidth Measurement .......................................................................................... 10 3.2 Output Power Measurement ............................................................................................................ 11 3.3 Power Spectral Density Measurement ............................................................................................ 12 3.4 Conducted Band Edges and Spurious Emission Measurement ..................................................... 13 3.5 Radiated Band Edges and Spurious Emission Measurement ........................................................ 14 3.6 AC Conducted Emission Measurement........................................................................................... 19 3.7 Antenna Requirements .................................................................................................................... 21 4 List of Measuring Equipment ................................................................................................................. 22 5 Measurement Uncertainty ....................................................................................................................... 24 Appendix A. Conducted Test Results Appendix B. AC Conducted Emission Test Result Appendix C. Conducted Spurious Emission Appendix D. Conducted Spurious Emission Plots Appendix E. Cabinet Radiated Spurious Emission Appendix F. Cabinet Radiated Spurious Emission Plots Appendix G. Duty Cycle Plots Appendix H. Setup Photographs TEL : 886-3-327-0868 Page Number : 3 of 24 FAX : 886-3-327-0855 Issue Date : May 09, 2024 Report Template No.: BU5-FR15CBT4.0 Version 2.4 Report Version : 03 FCC RADIO TEST REPORT Report No. : FR341305-02A History of this test report Report No. Version Description Issue Date FR341305-02A 01 Initial issue of report Feb. 02, 2024 FR341305-02A 02 Revise FCC ID and Model Name This report is an updated version, replacing the report issued on Feb. 02, 2024. May 06, 2024 FR341305-02A 03 Revise List of Measuring Equipment, Appendix A and Appendix C~G This report is an updated version, replacing the report issued on May 06, 2024. May 09, 2024 TEL : 886-3-327-0868 Page Number : 4 of 24 FAX : 886-3-327-0855 Issue Date : May 09, 2024 Report Template No.: BU5-FR15CBT4.0 Version 2.4 Report Version :…

Text truncated - open the document above for the full version.

TEL : 886-3-327-0868 Page Number : 1 of 29 FAX : 886-3-327-0855 Issue Date : May 08, 2024 Report Template No.: BU5-FR15CBT Version 2.4 Report Version : 03 FCC RADIO TEST REPORT Report No. : FR341305-02B FCC RADIO TEST REPORT FCC ID : ZAT-1312PSIP-3 Equipment : CC1312PSIP Brand Name : Texas Instruments Model Name : CC1312PSIPMOT3 Applicant : Texas Instruments Incorporated 12500 TI BLVD., Dallas, Texas, 75243 Manufacturer : Texas Instruments Incorporated 12500 TI BLVD., Dallas, Texas, 75243 Standard : FCC Part 15 Subpart C §15.247 The product was received on Sep. 27, 2023 and testing was performed from Oct. 19, 2023 to Jan. 17, 2024. We, Sporton International Inc. Wensan Laboratory, would like to declare that the tested sample has been evaluated in accordance with the test procedure s and has been in compliance with the applicable technical standards. The test results in thi s report apply exclusi vely to the te sted model / sample. Without written approval from Sporton International Inc. Wensan Laboratory, the test report shall not be reproduced except in full. Approved by: Louis Wu Sporton International Inc. Wensan Laboratory No.58, Aly. 75, Ln. 564, Wenhua 3rd, Rd., Guishan Dist., Taoyuan City 333010, Taiwan (R.O.C.) TEL : 886-3-327-0868 Page Number : 2 of 29 FAX : 886-3-327-0855 Issue Date : May 08, 2024 Report Template No.: BU5-FR15CBT Version 2.4 Report Version : 03 FCC RADIO TEST REPORT Report No. : FR341305-02B Table of Contents Hi story of thi s te st report .......................................................................................................................3 Summary of Test Result ........................................................................................................................4 1 General Description.........................................................................................................................5 1.1 Product Feature of E quipm ent Under Test .................................................................................5 1.2 Modi fication of EUT ..................................................................................................................5 1.3 Testing Location ......................................................................................................................6 1.4 Applicabl e Standards ...............................................................................................................6 2 Test Configuration of Equipment Under Test ..................................................................................7 2.1 Carrier Frequency Channel.......................................................................................................7 2.2 Test Mode ...............................................................................................................................8 2.3 Connection Diagram of Test System ....................................................................................... 10 2.4 Support Unit used in test configuration and system .................................................................. 10 2.5 EUT Operati on Test Setup...................................................................................................... 10 2.6 Measurement Results Explanation Exampl e ............................................................................ 11 3 Test Re sult .................................................................................................................................... 12 3.1 Num ber of Channel Measurem ent........................................................................................... 12 3.2 Hopping Channel Separation M easurement............................................................................. 13 3.3 Dwell Ti me Measurement ....................................................................................................... 14 3.4 20dB and 99% Bandwidt h Measurem ent ................................................................................. 15 3.5 Output Power Measurem ent ................................................................................................... 16 3.6 Conducted Band Edges Measurement .................................................................................... 17 3.7 Conducted Spuri ous Emission Measurem ent ........................................................................... 18 3.8 Radi ated Band Edges and Spurious Emission Measurement .................................................... 19 3.9 AC Conducted Emission Measurem ent ................................................................................... 24 3.10 Antenna Requi rem ents ........................................................................................................... 26 4 List of Measuring Equipment......................................................................................................... 27 5 Measurement Uncertainty.............................................................................................................. 29 Appendix A. Conducted Test Results Appendix B. AC Conducted Emission Test Result Appendix C. Conducted Spurious Emission Appendix D. Conducted Spurious Emission Plots Appendix E. Cabinet Radiated Spurious Emission Appendix F. Cabinet Radiated Spurious Emission Plots Appendix G. Duty Cycle Plots Appendix H. Setup Photographs TEL : 886-3-327-0868 Page Number : 3 of 29 FAX : 886-3-327-0855 Issue Date : May 08, 2024 Report Template No.: BU5-FR15CBT Version 2.4 Report Version : 03 FCC RADIO TEST REPORT Report No. : FR341305-02B History of this test report Report No. Version Description Issue Date FR341305-02B 01 Initial issue of report Feb. 02, 2024 FR341305-02B 02 Revise FCC ID and Model Name This report is an updat ed version, repl acing the report issued on Feb. 02, 2024. May 06, 2024 FR341305-02B 03 Revise List of Measuring Equipm ent, Appendix A and Appendix C~G This report is an updat ed version, repl acing th…

Text truncated - open the document above for the full version.

TEL : 886-3-327-0868 Page Number : 1 of 29 FAX : 886-3-327-0855 Issue Date : May 06, 2024 Report Template No.: BU5-FR15CBT Version 2.4 Report Version : 02 FCC RADIO TEST REPORT Report No. : FR341305-02C FCC RADIO TEST REPORT FCC ID : ZAT-1312PSIP-3 Equipment : CC1312PSIP Brand Name : Texas Instruments Model Name : CC1312PSIPMOT3 Applicant : Texas Instruments Incorporated 12500 TI BLVD., Dallas, Texas, 75243 Manufacturer : Texas Instruments Incorporated 12500 TI BLVD., Dallas, Texas, 75243 Standard : FCC Part 15 Subpart C §15.247 The product was received on Oct. 27, 2023 and testing was performed from Nov. 21, 2023 to Dec. 07, 2023. We, Sporton International Inc. Wensan Laboratory, would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval from Sporton International Inc. Wensan Laboratory, the test report shall not be reproduced except in full. Approved by: Louis Wu Sporton International Inc. Wensan Laboratory No.58, Aly. 75, Ln. 564, Wenhua 3rd, Rd., Guishan Dist., Taoyuan City 333010, Taiwan (R.O.C.) TEL : 886-3-327-0868 Page Number : 2 of 29 FAX : 886-3-327-0855 Issue Date : May 06, 2024 Report Template No.: BU5-FR15CBT Version 2.4 Report Version : 02 FCC RADIO TEST REPORT Report No. : FR341305-02C Table of Contents History of this test report ................................................................................................................................. 3 Summary of Test Result................................................................................................................................... 4 1 General Description ................................................................................................................................... 5 1.1 Product Feature of Equipment Under Test ........................................................................................ 5 1.2 Modification of EUT ........................................................................................................................... 5 1.3 Testing Location ................................................................................................................................ 6 1.4 Applicable Standards ......................................................................................................................... 6 2 Test Configuration of Equipment Under Test ......................................................................................... 7 2.1 Carrier Frequency Channel ............................................................................................................... 7 2.2 Test Mode .......................................................................................................................................... 8 2.3 Connection Diagram of Test System ............................................................................................... 10 2.4 Support…

Text truncated - open the document above for the full version.