ZBC-WS0814AWireless Charger with Stand

WS0814A User Manual Wireless Charger with Stand Important Safety Instructions ● Only use reputable third party chargers ● Do not place too close to magnetic strip or chip ID card to avoid magnetic failure ● Do not place within 2ricm of implantable medical devices(pacemaker, cochlear implant etc.) to avoid potential interference ● Do not clean with harmful chemicals or detergents ● Do not use if damaged or broken ● Misuse, dropping or excessive force may cause damage to the charging stand ● Do not allow to get wet. Unplug and do not use if it has been wet ● Do not use near heat source such as fireplace or heater ● Do not cover or use in confined spaces (e.g. in a pocket, bag, under covers, in a draw ● Do not cover or use in confined spaces to avoid overheating. ● Designed for indoor/home use Please Note: When wirelessly charging a device, the wireless charger and your device may feel warm. This is abnormal and should not be cause for concern. If the charger or the phone become hot to the touch, stop using. Compatibility Compatible with Qi2.2-enabled devices *including iPhone 17 series(25W max) iPhone 16 series(25W max) Features ● Charge your Qi2.2-enabled wireless charging phone ● Magnetically charge an iPhone 17/16 series Qi2.2 and MagSafe compatibility ensures perfect alignment of your iPhone for optimum every time ● Supports 25w wireless fast charging for compatible phones ● Works with Qi2.2 and MagSafe compatible cases ● Full safety protection with temperature control, voltage regulation and short circuit protection Specifications ● Wireless Standard: WPC/Qi2.2 MPP (v2.1.1) ● Input: USB-C PD 36W Max. ● Wireless iPhone Output: 25W/15W/10W/7.5W/5W ● Working Frequency: 110.5-205kHz, 360KHz ·Charging Efficiency: >75% ●Size: 60mm (W) x 12mm (H) ·Weight: 95g±10g ·Certifications: Qi2.2 ·Qi ID: 24827 Note: Does not work with non-MagSafe cases * Check with device manufacturer for wireless compatibility Note: please use 36 W above charger for 25W output Wireless Charger Operation  Connect the USB-C cable to a USB-C wall charger;  Place your iPhone onto the magnetic charging pad and the magnets will perfectly align for optimum wireless charging. If you need a stand function, simply pull out the metal stand, your phone should automatically start charging;  To remove your phone, simply pull the magnetic charging pad away from your phone. FCC Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: SHENZHEN DNS INDUSTRIES CO., LTD. Address: 23/F Building A, Shenzhen International Innovation Center, No. 1006 Shennan Road, Futian, Shenzhen, 518026, China FCC ID: ZBC-WS0814A Date: Aug. 27, 2026 2.911(d)(7) USA Designated Agent for Service of Process We, [SHENZHEN DNS INDUSTRIES CO., LTD.] (“the applicant”) designate [Wedo Group] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Wedo Group Address: 710 Arabian Ln Walnut, CA 91789, United States FRN：0037730611 Contact Name: Jeffrey Chen Telephone No: (323) 528-1888 Email: [email protected] Applicant Company name: SHENZHEN DNS INDUSTRIES CO., LTD. Address: 23/F Building A, Shenzhen International Innovation Center, No. 1006 Shennan Road, Futian, Shenzhen, 518026, China FRN: 0020639597 Contact Name: Yuki Wu Telephone No: +86-755-83401338 Email: [email protected] Signature: Signature:

SHENZHEN DNS INDUSTRIES CO., LTD. 23/F Building A, Shenzhen International Innovation Center, No. 1006 Shennan Road, Futian, Shenzhen, 518026, China Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: Aug. 27, 2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: ZBC-WS0814A SHENZHEN DNS INDUSTRIES CO., LTD. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Yuki Wu Title: Manager Address: 23/F Building A, Shenzhen International Innovation Center, No. 1006 Shennan Road, Futian, Shenzhen, 518026, China Tel.: +86-755-83401338 Email: [email protected]

SHENZHEN DNS INDUSTRIES CO., LTD. Code 00018768 Ed. 1 Item 1. The device is able to install software/program installation? ☐ Yes, go to Item 2. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A Device Wireless Charger with Stand Company name SHENZHEN DNS INDUSTRIES CO., LTD. Grantee code ZBC FCC ID ZBC-WS0814A FRN 0020639597 Contact name Yuki Wu Address 23/F Building A, Shenzhen International Innovation Center, No. 1006 Shennan Road, Futian, Shenzhen, 518026, China Telephone number +86-755-83401338 E-mail [email protected] Chipset/module information WB8128 Operating System (if applicable) N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (x86 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: iOS® 17 N/A # General Requirements (For Linux system) Yes / No or N/A Comments 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher N/A 3 3 RAM: 1 GB N/A 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; N/A After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐ Yes, go to Item 3. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software Item 3. Connectivity Capabilities: # Physical Interface Purpose Justification 1 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications. 4 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☒ Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐ Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies Signature: Name: Yuki Wu Date: Aug. 27, 2026

SHENZHEN DNS INDUSTRIES CO., LTD. 23/F Building A, Shenzhen International Innovation Center, No. 1006 Shennan Road, Futian, Shenzhen, 518026, China Product Similarity Declaration Product name: Wireless Charger with Stand Model name: WS0814A, PWR11402A FCC ID: ZBC-WS0814A We (SHENZHEN DNS INDUSTRIES CO., LTD.) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name and brand name.. Signature: Name: Yuki Wu Title: Manager Date: Aug. 27, 2026

TCB CALL página 1 File FCC ID: ZBC-WS0814A Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○ We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. On the official register from : https://bizfileonline.sos.ca.gov/search/business TCB CALL página 2 TCB CALL página 3 TCB CALL página 4 In google maps: TCB CALL página 5 ► CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit "C5266091_X23_Ed1_US_Agent_Letter" included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit "C5266091_X23_Ed1_US_Agent_Letter" >

SHENZHEN DNS INDUSTRIES CO., LTD. 23/F Building A, Shenzhen International Innovation Center, No. 1006 Shennan Road, Futian, Shenzhen, 518026, China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Aug. 27, 2026 Subject; Request for Confidentiality FCC ID: ZBC-WS0814A To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Parts List In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Yuki Wu Title: Manager

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: SHENZHEN DNS INDUSTRIES CO., LTD. Address: 23/F Building A, Shenzhen International Innovation Center, No. 1006 Shennan Road, Futian, Shenzhen, 518026, China Product Name: Wireless Charger with Stand Model Number: WS0814A, PWR11402A FCC Identifier: ZBC-WS0814A We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Yuki Wu Date: Aug. 27, 2026 Title: Manager Signature of applicant:

Report No.: AGC10461260711AP02 Page 1 of 3 EXTERNAL PHOTOS Top view of EUT Bottom view of EUT Report No.: AGC10461260711AP02 Page 2 of 3 Front view of EUT Back view of EUT Report No.: AGC10461260711AP02 Page 3 of 3 Left view of EUT Right view of EUT ****************************************End of Report*************************************

FCC ID Label Location 30mm*20mm FCC ID:ZBC-WS0814A

Report No.: AGC10461260711AP02 Page 1 of 3 INTERNAL PHOTOS Open view-1 of EUT Open view-2 of EUT WPT Antenna Report No.: AGC10461260711AP02 Page 2 of 3 Internal view-1 of EUT Internal view-2 of EUT Report No.: AGC10461260711AP02 Page 3 of 3 Label view of EUT ****************************************End of Report*************************************

Page 1 of 17 RF Exposure Report Report No.: AGC10461260711FH01 FCC ID : ZBC-WS0814A APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Wireless Charger with Stand BRAND NAME : DNS, Batteries Plus MODEL NAME : WS0814A, PWR11402A APPLICANT : SHENZHEN DNS INDUSTRIES CO., LTD. DATE OF ISSUE : Aug. 27, 2026 STANDARD(S) : 47 CFR FCC Part 2.1091 KDB 680106 D01 v04 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC10461260711FH01 Page 2 of 17 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Aug. 27, 2026 Valid Initial Release Report No.: AGC10461260711FH01 Page 3 of 17 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 2.2 DUT Coil and Size Information ................................................................................................................. 5 2.3 Related Submittal(S)/Grant (S) ................................................................................................................. 6 2.4 Test Methodology ...................................................................................................................................... 6 2.5 Equipment Approval Considerations ......................................................................................................... 6 3. Test Environment ............................................................................................................................................ 7 3.1 Address of The Test Laboratory ................................................................................................................ 7 3.2 Test Facility ................................................................................................................................................ 7 3.3 Environmental Conditions ......................................................................................................................... 8 3.4 Measurement Uncertainty ......................................................................................................................... 8 3.5 List of Equipment Used ............................................................................................................................. 8 4.System Test Configuration .............................................................................................................................. 9 4.1 Configuration of Tested System................................................................................................................ 9 4.2 Equipment Used in Tested System .......................................................................................................... 9 5. Description of Test Modes ........................................................................................................................... 10 6. Maximum Permissible Exposure ................................................................................................................. 11 6.1 Test Limits ................................................................................................................................................ 11 6.2 Test Setup (Block Diagram of Configuration).......................................................................................... 12 6.3 Test Procedures ...................................................................................................................................... 13 6.4 Test Result ............................................................................................................................................... 15 Appendix I: Photographs of Test Setup .......................................................................................................... 16 Appendix II: Photographs of Test EUT ........................................................................................................... 16 Report No.: AGC10461260711FH01 Page 4 of 17 1. General Information Applicant SHENZHEN DNS INDUSTRIES CO., LTD. Address 23/F Building A, Shenzhen International Innovation Center, No. 1006 Shennan Road, Futian, Shenzhen, 518026, China Manufacturer SHENZHEN DNS INDUSTRIES CO., LTD. Address 23/F Building A, Shenzhen International Innovation Center, No. 1006 Shennan Road, Futian, Shenzhen, 518026, China Factory Factory 1: HUIZHOU DNS TECHNOLOGY CO., LTD. Factory 2: D AND S INDUSTRIES (PHILIPPINES) CORPORATION Address Address 1: 5 Dongshun South Road, Dongjiang Hi-tech Industrial Park, Zhongkai Hi-tech Zone, Huizhou City, Guangdong, China Address 2: 1 to 5 Orient Goldcrest Suntrust Ecotown Building 2, Lot 8 Block 8, Sahud Ulan, Tanza, Region IV-A, Cavite, Philippines Product Designation Wireless Charger with Stand Brand Name DNS, Batteries Plus Test Model WS0814A Series Model(s) PWR11402A Difference Description All the same except for the model name and brand name. Date of receipt of test item Jun. 22, 2026 Date of Test Jun. 22, 2026 to Aug. 27, 2026 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RFE-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Sam Zheng (Project Engineer) Aug. 27, 2026 Reviewed By Bibo Zhang (Reviewer) Aug. 27, 2026 Approved By Angela Li (Authorized Officer) Aug. 27, 2026 Report No.: AGC10461260711FH01 Page 5 of 17 2. Product Information 2.1 Product Technical Description Operation Frequency Band WPT Band I: 55.84dBμV/m (Max) WPT …

Text truncated - open the document above for the full version.

Page 1 of 39 FCC Test Report Report No.: AGC10461260711FR01 FCC ID : ZBC-WS0814A APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Wireless Charger with Stand BRAND NAME : DNS, Batteries Plus MODEL NAME : WS0814A, PWR11402A APPLICANT : SHENZHEN DNS INDUSTRIES CO., LTD. DATE OF ISSUE : Aug. 27, 2026 STANDARD(S) : FCC Part 15 Subpart C REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC10461260711FR01 Page 2 of 39 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Aug. 27, 2026 Valid Initial Release Report No.: AGC10461260711FR01 Page 3 of 39 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 2.2 Related Submittal(S) / Grant (S) ............................................................................................................... 6 2.3 Test Methodology ...................................................................................................................................... 6 2.4 Special Accessories .................................................................................................................................. 6 2.5 Equipment Modifications ........................................................................................................................... 6 2.6 Antenna Requirement................................................................................................................................ 6 3. Test Environment ............................................................................................................................................ 7 3.1 Address of The Test Laboratory ................................................................................................................ 7 3.2 Test Facility ................................................................................................................................................ 7 3.3 Environmental Conditions ......................................................................................................................... 8 3.4 Measurement Uncertainty ......................................................................................................................... 8 3.5 List of Equipment Used ............................................................................................................................. 9 4. System Test Configuration ........................................................................................................................... 10 4.1 EUT Configuration ................................................................................................................................... 10 4.2 EUT Exercise ........................................................................................................................................... 10 4.3 Configuration of Tested System .............................................................................................................. 10 4.4 Equipment Used in Tested System ......................................................................................................... 11 4.5 Summary of Test Results ........................................................................................................................ 12 5. Description of Test Modes ........................................................................................................................... 13 6. Field Strength of Fundamental .................................................................................................................... 14 6.1 Measurement Limits ................................................................................................................................ 14 6.2 Measurement Procedure ......................................................................................................................... 15 6.3 Field Strength Calculation ....................................................................................................................... 16 6.4 Measurement Setup ................................................................................................................................ 17 6.5 Measurement Result ............................................................................................................................... 18 7. -20 dB Bandwidth Measurement ................................................................................................................. 30 7.1 Provisions Applicable .............................................................................................................................. 30 7.2 Measurement Procedure ......................................................................................................................... 30 7.3 Measurement Setup ................................................................................................................................ 30 7.4 Measurement Result ............................................................................................................................... 30 8. AC Power Line Conducted Emission Test .................................................................................................. 32 8.1 Measurement Limits ................................................................................................................................ 32 8.2 Measurement Setup ...............................................................................…

Text truncated - open the document above for the full version.

Page1of4 DONGGUANKIMCHENINDUSTRYINTLLIMITED DONGGUANKIMCHENINDUSTRYINTLLIMITED Specification PRODUCTSPECIFICATION client：HUIZHOUDNSTECHNOLOGYCO.,LTD. CUSTOMER: ____________________________________________________________________ CustomerPartNumber: HIND-09840J0000-1G CUSTP/N: ____________________________________________________________________ GoldAwardPartNumber: J30-000791-001 KCP/N: ____________________________________________________________________ productmodel：21.46*39.3*0.08*65P*11TS*8MM DESE: date： 2025.09.2 DATE:_____________________________________________________________________ edition： A.0 VERSION:_____________________________________________________________________ (Customeracknowledgesreceiptofthestamp)ACCEPTANCESTAMP Fiction PREPAREDBY Merchandiser MERCHANDISER EngineeringReview ENGINEER CHECKEDBY Ratify APPROVEDBY WangZhenwei Address:No.2XishaRoad,ShijieTown,DongguanCity;Tel:86-076986018114;Fax:86-076986015646 Http://www.jzcoil.com DocumentNumber:FilNo:KC-JZ-09-008 Page2 DONGGUANKIMCHENINDUSTRYINTLLIMITED of4 版本变更履历 versionchangeHistory 客户料号: CUSTP/N HIND-09840J0000-1G 金赞型号: KCDESE 21.46*39.3*0.08*65P*11TS*8M M…

Text truncated - open the document above for the full version.