ZKJ-SBC001Android Board for GEA LCD products

Regulatory Module Integration Instructions SBC001 is highly integrated single module which features a low power 2x2 11a/b/g/n/ac dual- band Wi-Fi subsystem and a Bluetooth subsystem. The Wi-Fi subsystem contains the 802.11a/b/g/n/ac radio, baseband, and MAC that are designed to meet both the low power and high throughput application. SBC001 has a 32-bit RISC MCU that handles Wi-Fi and Bluetooth tasks. The Bluetooth subsystem contains the Bluetooth radio, baseband, link controller. It also uses the 32-bit RISC MCU for the Bluetooth protocols. The SBC (Sigle Board Computer) module has been granted modular approval for GEA LCD products including this Wi-Fi/Bluetooth module. OEM integrators for host products may use the module in their final products without additional FCC / IC (Industry Canada) certification if they meet the following conditions. Otherwise, additional FCC / IC approvals must be obtained.  The host product with the module installed must be evaluated for simultaneous transmission requirements.  The user’s manual for the host product must clearly indicate the operating requirements and conditions that must be observed to ensure compliance with current FCC / IC RF exposure guidelines.  To comply with FCC / IC regulations limiting both maximum RF output power and human exposure to RF radiation, use this module only with the included onboard antenna.  A label must be affixed to the outside of the host product with the following statements: Product Name: Android Board for GEA LCD products Contains FCCID: ZKJ-SBC001 Contains IC: 10229A-SBC001 The final host / module combination may also need to be evaluated against the FCC Part 15B criteria for unintentional radiators in order to be properly authorized for operation as a Part 15 digital device. Device Classifications Since host devices vary widely with design features and configurations module integrators shall follow the guidelines below regarding device classification and simultaneous transmission, and seek guidance from their preferred regulatory test lab to determine how regulatory guidelines will impact the device compliance. Proactive management of the regulatory process will minimize unexpected schedule delays and costs due to unplanned testing activities. The module integrator must determine the minimum distance required between their host device and the user’s body. The FCC provides device classification definitions to assist in making the correct determination. Note that these classifications are guidelines only; strict adherence to a device classification may not satisfy the regulatory requirement as near-body device design details may vary widely. Your preferred test lab will be able to assist in determining the appropriate device category for your host product and if a KDB or PBA must be submitted to the FCC. Note, the module you are using has been granted modular approval for mobile applications. Portable applications may require further RF exposure (SAR) evaluations. It is also likely that the host / module combination will need to undergo testing for FCC Part 15 regardless of the device classification. Your preferred test lab will be able to assist in determining the exact tests which are required on the host / module combination. FCC Definitions Portable: (§2.1093) — A portable device is defined as a transmitting device designed to be used so that the radiating structure(s) of the device is / are within 20 centimeters of the body of the user. Mobile: (§2.1091) (b) — A mobile device is defined as a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitter’s radiating structure(s) and the body of the user or nearby persons. Per §2.1091d(d)(4) In some cases (for example, modular or desktop transmitters), the potential conditions of use of a device may not allow easy classification of that device as either Mobile or Portable. In these cases, applicants are responsible for determining minimum distances for compliance for the intended use and installation of the device based on evaluation of either specific absorption rate (SAR), field strength, or power density, whichever is most appropriate. Simultaneous Transmission Evaluation This module has not been evaluated or approved for simultaneous transmission as it is impossible to determine the exact multi-transmission scenario that a host manufacturer may choose. Any simultaneous transmission condition established through module integration into a host product must be evaluated per the requirements in KDB447498D01(8) and KDB616217D01,D03 (for laptop, notebook, netbook, and tablet applications). These requirements include, but are not limited to:  Transmitters and modules certified for mobile or portable exposure conditions can be incorporated in mobile host devices without further testing or certification when:  The closest separation among all simultaneous transmitting antennas is >20 cm, Or  Antenna separation distance and MPE compliance requirements for ALL simultaneous transmitting antennas have been specified in the application filing of at least one of the certified transmitters within the host device. In addition, when transmitters certified for portable use are incorporated in a mobile host device, the antenna(s) must be >5 cm from all other simultaneous transmitting antennas.  All antennas in the final product must be at least 20 cm from users and nearby persons. Contact info for above certified FCC: Company Name: Haier US Appliance Solutions, Inc. Contact Name: Jeff Drake Address: Appliance Park AP5-2N-65, Louisville, KY 40225, United States Telephone No: +1-502-452-5135 Email: [email protected] OEM Instruction Manual Content Consistent with §2.909(a), the following text must be included within the user’s manual or operator instruction guide for the final commercial product (OEM-specific content …

Text truncated - open the document above for the full version.

Appliance Park AP5-2N-65, Louisville, KY 40225, United States Tel No : +1-502-452-5135 Fax No : +1-502-452-0784 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA UNII Device Declaration Letter To whom it may concern: We have declared below featured for FCC equipment authorization, Device FCC ID: ZKJ-SBC001 (1) Operational Mode : Master Client with Radar detection capability N/A Client without radar detection capability, (2) Active / Passive Scanning , adhoc mode access point capability Frequency Band (MHz) Active Scanning (the device can transmit a probe (beacon)) passive scanning (where the device is can listen only with no probes) Ad Hoc Mode capability Access point capability 2412-2462 Yes No Yes No Yes No Yes No 2422-2452 Yes No Yes No Yes No Yes No 5180-5240 Yes No Yes No Yes No Yes No 5190-5230 Yes No Yes No Yes No Yes No 5210 Yes No Yes No Yes No Yes No 5745-5825 Yes No Yes No Yes No Yes No 5755-5795 Yes No Yes No Yes No Yes No 5775 Yes No Yes No Yes No Yes No (3) Country code selection ability Yes No If yes, pls explain how it was implemented: (4) Meet 15.202 requirement Yes No pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non- DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. Apply Does not apply (If apply, pls help to provide explanation on it was implement, and how software was controlled) Sincerely NAME: Park, Hansung Applicant: Haier Korea R&D Co., Ltd.

Appliance Park AP5-2N-65, Louisville, KY 40225, United States Tel No : +1-502-452-5135 Fax No : +1-502-452-0784 FCC DFS Uniform Spreading Declaration Date: 2024-09-10 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. FCC ID: ZKJ-SBC001 Product/ Model Number : Android Board for GEA LCD products / SBC001 Regarding Uniform Spreading requirements for DFS operation identified in FCC 06-96 in ET Docket 03- 122; "Uniform Channel Spreading: The spreading of U-NII device Operating Channels over the 5250- 5350 MHz and/or 5470-5725 MHz bands to avoid dense clusters of devices operating on the same Channel." We declare the device provides on aggregate a Uniform Spreading of the Operating Channels across the entire band. This applies to the 5250-5350 MHz and/or 5470-5725 MHz bands. NAME: Park, Hansung Applicant: Haier Korea R&D Co., Ltd.

Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2024/09/10 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: ZKJ-SBC001 Haier US Appliance Solutions, Inc. (“the applicant”) certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information: FRN: 0025028994 Name: Haier US Appliance Solutions, Inc. Address: Appliance Park AP5-2N-65, Louisville, KY 40225, United States Contact Person: Jeff Drake Tel.: +1-502-452-5135 Email: [email protected] Sincerely, Haier US Appliance Solutions, Inc. Jeff Drake

Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2024/09/10 FCC ID: ZKJ-SBC001 47 CFR section 2.911(d)(5)(i) Attestation Statement Haier US Appliance Solutions, Inc. certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Haier US Appliance Solutions, Inc. certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Additional Explanation: - 47 CFR section 2.911(d)(5)(ii) Attestation Statement Haier US Appliance Solutions, Inc. (“the applicant”) certifies that, as of the date of the filing of this application, the applicant ☐ - is / ☐ - is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, NAME: Jeff Drake TITLE: Senior Director, Software Chief Architect Applicant: Haier US Appliance Solutions, Inc. 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . 2 - Letters should be placed on appropriate letterhead.

Appliance Park AP5-2N-65, Louisville, KY 40225, United States Tel No : +1-502-452-5135 Fax No : +1-502-452-0784 Special Power of Attorney I, Jeff Drake Haier US Appliance Solutions, Inc. hereby authorize appoint Park Hansung of Haier Korea R&D Co., Ltd. to represent me to act on my behalf to do any and all of the following: Sign on my behalf the agency, anti-drug and confidentiality cover letters and apply to FCC for the products. The right, powers, and authority in fact to exercise any and all of the rights and powers herein granted shell commence and be in full force from 2024/09/10 and continue to effective unless specifically terminated by either party. Applicant: Haier US Appliance Solutions, Inc. FCC ID: ZKJ-SBC001 Dated 2024/09/10 Sincerely, NAME: Jeff Drake TITLE: Senior Director, Software Chief Architect Applicant: Haier US Appliance Solutions, Inc. Address: Appliance Park AP5-2N-65, Louisville, KY 40225, United States

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date : Sep 10, 2024 SUBJECT: FCC Application for (FCC ID : ZKJ- SBC001) To Whom It May Concern: We, the undersigned, hereby authorize Hwang Won-Jae at CTK on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by CTK on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, NAME: Park, Hansung Applicant: Haier Korea R&D Co., Ltd.

Appliance Park AP5-2N-65, Louisville, KY 40225, United States Tel No : +1-502-452-5135 Fax No : +1-502-452-0784 FCC Software Configuration Control Declaration Date: 2024-09-10 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. FCC ID: ZKJ-SBC001 Product/ Model Number : Android Board for GEA LCD products / SBC001 Regarding FCC Country Code Selection guidelines identified in KDB 594280 "Country Code Selection". “All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified.” We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. NAME: Park, Hansung Applicant: Haier Korea R&D Co., Ltd.

Rev 11/20/07 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID : ZKJ-SBC001 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block diagram Schematics Schematics_PCB Layout Parts list Operational description Block diagram.pdf Schematics.pdf Schematics_PCB Layout.pdf Part list.pdf Operational description.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, NAME: Park, Hansung Applicant: Haier Korea R&D Co., Ltd.

Appliance Park AP5-2N-65, Louisville, KY 40225, United States Tel No : +1-502-452-5135 Fax No : +1-502-452-0784 MODULAR APPROVAL LETTER Applicant : Haier US Appliance Solutions, Inc. FCC ID : ZKJ-SBC001 Date : 2024/09/10 We would like to answer for Single Modular Approval in accordance with the requirement of rule part 15.212 as described below No. Requirements Comment Comply (Y/N) 1 The radio element of the modular transmitter has its own shielding Refer to the external photo Y 2 The modular transmitter must have buffered modulation data/inputs (if such inputs are provided) All input to the modules are buffered through microprocessor inputs. Y 3 The modular transmitter must have its own power supply regulation. Internal power regulators Refer to the Block-diagram Y 4 The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(c). Refer to the internal photo Y 5 The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. The EUT was tested in a standalone configuration via a SD extension cable Refer to the test setup photo Y 6 The modular transmitter must be labeled with its own FCC ID. If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module Refer to the user manual Y 7 The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements Refer to the user manual Y 8 The modular transmitter must comply with any applicable RF exposure requirements Refer to the RF exposure statement for more details. Y Sincerely, NAME: Park, Hansung Applicant: Haier Korea R&D Co., Ltd.

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com EUT External Photographs

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Label Photographs and Location

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com EUT Internal Photographs CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com [Antenna] ANT2 : WLAN ANT1 : WLAN, BT CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com [Port]

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Page 1 of 4 RF EXPOSURE EVALUATION Applicant : Haier US Appliance Solutions, Inc. Applicant Address : Appliance Park AP5-2N-65, Louisville, Kentucky, United States, 40225 Kind of Product : Android Board for GEA LCD products Equipment model name : SBC001 FCC ID : ZKJ-SBC001 CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Page 2 of 4 Standard Requirement The following RF exposure procedures are applicable : - FCC Rules Part 1.1310 Radiofrequency radiation exposure limits Table 1 below sets forth limits for Maximum Permissible Exposure (MPE) to radiofrequency electromagnetic fields. Table 1—Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *100 6 3.0-30 1842/f 4.89/f *900/f 2 6 30-300 61.4 0.163 1.0 6 300-1,500 f/300 6 1,500-100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *100 30 1.34-30 824/f 2.19/f *180/f 2 30 30-300 27.5 0.073 0.2 30 300-1,500 f/1500 30 1,500-100,000 1.0 30 f = frequency in MHz * = Plane-wave equivalent power density CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Page 3 of 4 MPE Calculations The EUT will only be used with a separation of 20 centimeters or greater between the antenna and the body of the user. The MPE calculation for this exposure is shown below. The peak radiated output power (EIRP) is calculated as follows: EIRP = P + G Where, P = Power input to the antenna (mW) G = Power gain of the antenna (dBi) The numeric gain(G) of the antenna with a gain specified in dB is determined by: G = Log -1 (dB antenna gain / 10) Power density at the specific separation: S = PG/(4R 2 π) Where, S = Maximum power density (mW/cm 2 ) P = Power input to the antenna (mW) G = Numeric power gain of the antenna R = Distance to the center of the radiation of the antenna (20cm = limit for MPE) Estimated safe separation: R = √(PG / 4π) Where, P = Power input to the antenna (mW) G = Numeric power gain of the antenna R = Distance to the center of the radiation of the antenna (20cm = limit for MPE) CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Page 4 of 4 RF Exposure Results Mode P G (dBi) Power tolerance (dB) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) R (cm) (dBm) (mW) BT 12.006 25.15 2.17 +2 0.0082 1.000 20 BLE 11.976 24.98 2.17 +2 0.0082 WLAN 2.4 GHz 18.880 122.46 5.18 * +2 0.0803 WLAN 5 GHz 19.530 142.23 6.52 * +2 0.1270 * Note : Per KDB 662911, the MIMO directional gain is calculated using the following formula, Where G N is the gain of the nth antenna and N ANT , the total number of antennas used. Directional gain = 10 log[(10 G1/20 + 10 G2/20 + ... + 10 GN/20 ) 2 /N ANT ] dBi Simultaneous transmitter Mode MPE ratios Limit BT 0.0082 - BLE 0.0082 WLAN 2.4 GHz 0.0803 WLAN 5 GHz 0.1270 Combined 0.2237 1 *MPE ratios = MPE/MPE limit at each frequency

DATA SHEET WIRELESS COMPONENTS Ceramic Chip Antenna ANT5320LL24R2455A 2.4 AND 5 GHZ 5320 Series Product Specification – May 8, 2014 V.0 www.yageo.com May. 8, 2014 V. 0 WIRELESS COMPONENTS 2 7 Product specification Ceramic Chip Antenna FEATURES  Compact size  Omni-directional radiation  Dual-band design  Tape & reel automatic mounting  Reflow process compatible  RoHS compliant APPLICATIONS  2.4 & 5 GHz WiFi device  ISM band equipment ORDERING INFORMATION All part numbers are identified by the series, packing type, material, size, antenna type, working frequency and packing quantity. PART NUMBER ANT 5320 L L24 R 2455A (1) (2) (3) (4) (5) (6) ( 1 ) PRODUCT ANT = Antenna ( 2 ) SIZE 5320 = 5.3 × 2.0 ( 3 ) ANTENNA TYPE L,F,A = Chip Antenna ( 4 ) SERIAL NO. L24 ( 5 ) PACKING STYLE R = Tape and Reel ( 6 ) WORKING FREQUENCY 2455 = 2.45/ 5 GHz PHYCOMP CTC CAN4311753242522K 12NC 431175324252 www.yageo.com May. 8, 2014 V. 0 WIRELESS COMPONENTS 3 7 Product specification Ceramic Chip Antenna SPECIFICATION DESCRIPTION VALUE Centre Frequency 2.45/ 5 GHz Bandwidth 120M / 900 MHz (min) Return Loss 10 dB min Polarization Linear Azimuth Beamwidth Omni-directional Peak Gain 2.17 / 3.51 dBi ( Typ. ) Impedance 50 Ω Operating Temperature -40~105 degree Maximum Power 1 W Termination Ag (Environmentally-Friendly Leadless) Resistance to Soldering Heats 260°C , 10sec. NOTE 1. The specification is defined on Yageo evaluation board Ta b l e 1 O O U U T T L L I I N N E E S S F i g . 1 Antenna outlines DIMENSIONS DIMENSION L (mm) 5.30 ± 0.10 W (mm) 2.00 ± 0.10 T (mm) 1.15 ± 0.10 A (mm) 0.80 ± 0.10 B (mm) 0.80 ± 0.10 C (mm) 0.50 ± 0.10 D (mm) 2.40 ± 0.10 Table 2 Machinical Dimension TERMINAL NAME FUNCTION S1 Feeding Point S2 Soldering Point S3 GND Table 3 Termination configuration www.yageo.com May. 8, 2014 V. 0 WIRELESS COMPONENTS 4 7 Product specification Ceramic Chip Antenna F i g . 3 Outlook and dimension of evaluation board REFERENCE DESIGN OF EVALUATION BOARD F i g . 4 Details of soldering pad www.yageo.com May. 8, 2014 V. 0 WIRELESS COMPONENTS 5 7 Product specification Ceramic Chip Antenna F i g . 5 Return loss ELECTRICAL PERFORMANCES Marker data 1. 2.38GHz , -10dB 2. 2.45GHz , -16.2dB 3. 2.50GHz , -10dB 4. 4.95GHz , -10dB 5. 5.47GHz , -16.8dB 6. 5.85GHz , -18.2dB www.yageo.com May. 8, 2014 V. 0 WIRELESS COMPONENTS 6 7 Product specification Ceramic Chip Antenna F i g . 6 Radiation pattern Evaluation board and XYZ direction Frequency= 2.45 GHz Max gain = 2.17 dBi MEG (mean effective gain)= -1.23 dBi Directivity (dB) = 3.48 Efficiency = -1.31dB, 73.98 % Frequency= 5.47 GHz Max gain = 3.51 dBi MEG (mean effective gain)= -2.68 dBi Directivity (dB) = 4.95 Efficiency = -1.44dB, 71.82 % www.yageo.com May. 8, 2014 V. 0 WIRELESS COMPONENTS 7 7 Product specification Ceramic Chip Antenna REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 0 Jan. 30, 2013 - - New data sheet for SMD type antenna, 2.4 / 5GHz application, 5320 series PIFA mode

TEST REPORT CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 Report No.: CTK-2024-02548 Page (1) / (30) Pages [QF-QP15-07] Ver.02 Project Number: CTK-R-2024-03979 1. Applicant ◦ Name : Haier US Appliance Solutions, Inc. ◦ Address : Appliance Park AP5-2N-65, Louisville, Kentucky, United States, 40225 ◦ Date of Receipt : 2024-07-19 2. Manufacturer ◦ Name : Haier US Appliance Solutions, Inc. ◦ Address : Appliance Park AP5-2N-65, Louisville, Kentucky, United States, 40225 3. Use of Report : For FCC Conformance / ISED Conformance 4. Test Sample / Model : Android Board for GEA LCD products / SBC001 5. Date of Test : 2024-08-02 to 2024-09-06 6. Test Standard(method) used : FCC 47 CFR part 15 subpart E 15.407 ISED RSS-247 & RSS-Gen 7. Testing Environment : Temp.: (23 ± 1) °C, Humidity: (55 ± 3) % R.H. 8. Test Results : Compliance 9. Location of Test : Permanent Testing Lab On Site Testing (Address : (Unhak-Dong) 5, Dongbu-ro 221beon-gil, Cheoin-gu, Yong-in-si, Gyeonggi-do, Korea) The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This report cannot be reproduced or copied without the written consent of CTK. Approval Tested by Ji-Hye, Kim: (Signature) Technical Manager Won-Jae, Hwang: (Signature) Remark. This report is not related to KOLAS accreditation and relevant regulation. 2024-09-10 CTK Co., Ltd. CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 Report No.: CTK-2024-02548 Page (2) / (30) Pages [QF-QP15-07] Ver.02 Project Number: CTK-R-2024-03979 REPORT REVISION HISTORY Date Revision Page No 2024-09-10 Issued (CTK-2024-02548) all This report shall not be reproduced except in full, without the written approval of CTK Co., Ltd. This document may be altered or revised by CTK Co., Ltd. personnel only, and shall be noted in the revision section of the document. Any alteration of this document not carried out by CTK Co., Ltd. will constitute fraud and shall nullify the document. CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 Report No.: CTK-2024-02548 Page (3) / (30) Pages [QF-QP15-07] Ver.02 Project Number: CTK-R-2024-03979 CONTENTS 1. General Product Description ........................................................................................ 4 1.1 Applicant Information ......................................................................................... 4 1.2 Product Information ............................................................................................ 4 1.3 Peripheral Devices .............................................................................................. 5 1.4 Model Differences ............................................................................................... 5 2. Accreditations ........................................................................................................... 6 2.1 Laboratory Accreditations and Listings .................................................................. 6 2.2 Calibration Details of Equipment Used for Measurement .......................................... 6 3. Test Specifications ..................................................................................................... 7 3.1 Summary of tests 3.1 Summary of tests ............................................................... 7 3.2 Description of Dynamic Frequency Selection Test .................................................... 8 3.3 Measuring Systematic diagram ........................................................................... 12 3.4 Description of EUT ............................................................................................ 13 3.4.1 Test Channel............................................................................................ 13 3.4.2 Test Result .............................................................................................. 14 APPENDIX A – Test Equipment Used For Tests ................................................................. 30 CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 Report No.: CTK-2024-02548 Page (4) / (30) Pages [QF-QP15-07] Ver.02 Project Number: CTK-R-2024-03979 1. General Product Description 1.1 Applicant Information Company Haier US Appliance Solutions, Inc. Contact Point Appliance Park AP5-2N-65, Louisville, Kentucky, United States, 40225 Contact Person Name : Park, Hansung E-mail : [email protected] Tel : +82-31-8094-6732 Fax : +82-31-8094-6888 1.2 Product Information FCC ID ZKJ-SBC001 ISED 10229A-SBC001 Product Description Android Board for GEA LCD products Model name SBC001 Variant Model name - Operating Frequency UNII 1 : 5 180 MHz – 5 240 MHz (20 MHz_BW) 5 190 MHz – 5 230 MHz (40 MHz_BW) 5 210 MHz (80 MHz_BW) UNII 2A : 5 260 MHz – 5 320 MHz (20 MHz_BW) 5 270 MHz – 5 310 MHz (40 MHz_BW) 5 290 MHz (80 MHz_BW) UNII 2C : 5 500 MHz – 5 720 MHz (20 MHz_BW) 5 510 MHz – 5 710 MHz (40 MHz_BW) 5 530 MHz – 5 690 MHz (80 MHz_BW) UNII 3 : …

Text truncated - open the document above for the full version.