ZQ6-WMCT759BCC2640RHB BLE module

AMPAK Technology Inc. www.ampak.com.tw Proprietary & Confidential Information Doc. NO: AMPAK WMCT-759B Hardware & Software Setup Guide Rev. 0.0 AMPAK Technology Inc. www.ampak.com.tw Proprietary & Confidential Information Doc. NO: 1 1. Download & Install BLE-Stack The latest BLE software can be downloaded at http://www.ti.com/tool/ble-stack?DCMP=wbu-blestack&HQS=ble-stack. After the BLE-Stack software installation is complete, the Prolific driver must be associated with the device in order to use the BTool application. 2. Associate Prolific Driver with WMCT-759B To associate the Prolific driver, you must first connect the WMCT-759B to the PC’s USB port, or to a USB hub that connects to the PC. Figure 1 Connect the WMCT-759B to the PC’ USB port This section will guide you on how to install the PL-2303 Windows Driver. You can download the latest Driver Installer program from Prolific Support website: http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225&pcid=41 AMPAK Technology Inc. www.ampak.com.tw Proprietary & Confidential Information Doc. NO: 2 2.1 Power on your computer and boot to Windows. Run or double-click the PL-2303 Windows Driver Installer program.( e.g.PL2303_Prolific_DriverInstaller_v1.12.0.exe) 2.2 The InstallShield Wizard will be displayed to inform you that the PL-2303 USB-to-Serial driver will be installed on your computer. Click Next to continue. Figure 2 InstallShield Wizard 2.3 The PL-2303 Driver Installer program will then start to install the drivers needed. Figure 3 Installer program AMPAK Technology Inc. www.ampak.com.tw Proprietary & Confidential Information Doc. NO: 3 2.4 Click the Finish button to close the InstallShield program. If you have plugged the cable into the PC while running the setup installation, please unplug and replug the cable for the system to detect the device. Figure 4 InstallShield Wizard Finish 2.5 Plug in the USB to Serial adapter to the PC USB port. Windows should detect the driver as Prolific USB-to-Serial Com Port. Go to Device Manager and check for the “Prolific USB-to-Serial Com Port” device and the COM port number assigned by Windows. See the next section. 3. Determining the COM Port You will need to know which COM port Windows has assigned to the serial port. To find out, right-click on the “Computer” icon on your Start and select “Properties”, shown in Figure 5. Figure 5 Win7 PC, Finding Computer Properties AMPAK Technology Inc. www.ampak.com.tw Proprietary & Confidential Information Doc. NO: 4 The “System” window should open up. Click “Device Manager”: Figure 6 Win7 PC, Finding Device Manager A list of all hardware devices should appear. Under the section “Ports (COM & LPT)”, the port should appear. Figure 7 Win7 PC, Connected Ports List Take note of this port number, as it will be needed in order to use BTool. You may close the device manager at this point. AMPAK Technology Inc. www.ampak.com.tw Proprietary & Confidential Information Doc. NO: 5 4. Starting the Application BToll On Start-up you should be able to set the Serial Port Settings. Set the “Port” value to the COM port earlier noted in Section 3. Baud rate select 115200. For the other settings, use the default values as shown in Figure 8. Press “OK” to connect to the Host Board Figure 8 BTool, Serial Port settings When connected you should see the screen presented in Figure 9. The screen indicates that you now have a serial port connection to the MWCT-759B Board. AMPAK Technology Inc. www.ampak.com.tw Proprietary & Confidential Information Doc. NO: 6 Figure 9 BTool, Overview 4.1 TX test Step1. Select Adv. Command clicking to the “HCI” and found the “HCI_LETransmitterTest”. AMPAK Technology Inc. www.ampak.com.tw Proprietary & Confidential Information Doc. NO: 7 Step2. Before establishing a transmitter test, you will want to set up the desired transmission parameters. After parameter setting, click “Send Command” button to begin testing. txChannel= (F-2402)/2 ; L(2402)=0 ; M(2440)=19 ; H(2480)=39 testDataLength= 37 testData=00 00=PRBS9 ; 01=11110000 ; 02=10101010 AMPAK Technology Inc. www.ampak.com.tw Proprietary & Confidential Information Doc. NO: 8 Step3 Change TX Channel Step3.1. Select “HCI_LETestEnd” and click the “Send Command” button to end this test. Step3.2. Select HCI_LETransmitterTest and change parameter of txChannel. Click the “Send Command” button to begin testing. AMPAK Technology Inc. www.ampak.com.tw Proprietary & Confidential Information Doc. NO: 9 4.2 RX test Step1. Select Adv. Command clicking to the “HCI” and found the “HCI_LEReceiverTest”. reChannel= (F-2402)/2 ; L(2402)=0 ; M(2440)=19 ; H(2480)=39 step1.1: Press the “Send Command” button to perform RX test. step1.2: Using instrument to transmission packets. step1.3: Perform HCI_LETestEnd, in message log window can find the number of received. AMPAK Technology Inc. www.ampak.com.tw Proprietary & Confidential Information Doc. NO: 10 Step2. Change RX Channel Please refer to Section 4.1 step 3. AMPAK Technology Inc. www.ampak.com.tw Proprietary & Confidential Information Doc. NO: 11 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiv…

Text truncated - open the document above for the full version.

RF_734_00, Issue 1 Modular Approval Request FCC (per DA 00-1407) FCC ID: ZQ6-WMCT759B Items to be covered Answer from applicant 1. The modular transmitter must have its own RF shielding. The modular has a shielding Case. Please refer to EUT Photo. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. The component number is CC2640 3. The modular transmitter must have its own power supply regulation. The component number is CC2640 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable).. The device has no antenna Connector. And no external amplifier will be used with this modular. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. This modular is tested under stand-alone configuration. Please refer to Test setup photo. 6. The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. The modular transmitter is labeled with its own FCC ID number. Please refer to label sample and label location. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A cop y of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. The modular complies with this requirement. Please refer to user manual. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. The device complies with this requirement. Please refer to RF exposure report. Note: If compliance with one or more of the numbered requirements, listed above, cannot be demonstrated, it may be possible to obtain a “Limited Modular Approval” (LMA). Name and surname of applicant (or authorized representative): __________________ Date: ___22 January 2016____ Signature: ___________________________

Project No.: EP5O2304 Page No. : 1 of 3 Photographs of EUT

Project No.: EP5O2304 Page No. : 2 of 3 Project No.: EP5O2304 Page No. : 3 of 3

Report No.: FA5O2304 Page : 1 of 6 Report Version: Rev. 02 FCC RF Exposure Report FCC ID : ZQ6-WMCT759B Equipment : CC2640RHB BLE module Model No. : WMCT-759B Brand Name : AMPAK Applicant : AMPAK Technology Inc. Address : No.1 Jen Ai Road, Hsinchu Industrial Park,Hukou, Hsinchu, Taiwan Standard : 47 CFR FCC Part 2.1093 Received Date : Oct. 23, 2015 Tested Date : Jan. 06 ~ Jan. 07, 2016 We, International Certification Corp., would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It may be duplicated completely for legal use with the approval of the applicant. It shall not be reproduced except in full without the written approval of our laboratory. Approved & Reviewed by: Gary Chang / Manager Ty: XXX Report No.: FA5O2304 Page : 2 of 6 Report Version: Rev. 02 Table of Contents 1 EXPOSURE EVALUATION OF PORTABLE DEVICES ....................................................................... 4 1.1 SAR TEST EXCLUSION THRESHOLD FOR 100MHz to 6GHz and  50mm ................................... 4 1.2 EVALUATION RESULTS ....................................................................................................................... 5 2 TEST LABORATORY INFORMATION ................................................................................................. 6 Report No.: FA5O2304 Page : 3 of 6 Report Version: Rev. 02 Release Record Report No. Version Description Issued Date FA5O2304 Rev. 01 Initial issue Jan. 21, 2016 FA5O2304 Rev. 02 Revised brand name (Page 1) Jan. 25, 2016 Report No.: FA5O2304 Page : 4 of 6 Report Version: Rev. 02 1 EXPOSURE EVALUATION OF PORTABLE DEVICES Human exposure to RF emissions from portable devices (47 CFR §2.1093), as defined by the FCC, must be evaluated with respect to the FCC-adopted limits for SAR. Evaluation of mobile devices, as defined by the FCC, may also be performed with respect to SAR limits, but in such cases it is usually simpler and more cost-effective to evaluate compliance with respect to field strength or power density limits. For certain devices that are designed to be used in both mobile and portable configurations similar to those described in 47 CFR §2.1091(d)(4), such as certain desktop phones and wireless modem modules, compliance for mobile configurations is also satisfied when the same device is evaluated for SAR compliance in portable configurations. 1.1 SAR TEST EXCLUSION THRESHOLD FOR 100MHz to 6GHz and  50mm Frequency (MHz) 5 10 15 20 25 Separation distance (mm) 150 39 77 116 155 194 SAR Test Exclusion Threshold (mW) 300 27 55 82 110 137 450 22 45 67 89 112 835 16 33 49 66 82 900 16 32 47 63 79 1500 12 24 37 49 61 1900 11 22 33 44 54 2450 10 19 29 38 48 3600 8 16 24 32 40 5200 7 13 20 26 33 5400 6 13 19 26 32 5800 6 12 19 25 31 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where •f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. Report No.: FA5O2304 Page : 5 of 6 Report Version: Rev. 02 1.2 EVALUATION RESULTS Maximum Conducted Output Power Result Condition RF Output Power (dBm) Modulation Mode Freq. (MHz) Peak Power (dBm) Average Power (dBm) Average Power (mW) Antenna Gain (dBi) LE-1Mbps 2402 5.05 5.02 3.18 0.5 LE-1Mbps 2440 4.97 4.93 3.11 0.5 LE-1Mbps 2480 4.79 4.74 2.98 0.5 [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] * [√f(GHz)] =3.18 / 5 * √2.402 = 0.99 < 3.0 SAR Test Exclusion Thresholds is < 10mW and 3.0 for separation distance 5mm. Therefore, SAR test is not required. Report No.: FA5O2304 Page : 6 of 6 Report Version: Rev. 02 2 Test laboratory information Established in 2012, ICC provides foremost EMC & RF Testing and advisory consultation services by our skilled engineers and technicians. Our services employ a wide variety of advanced edge test equipment and one of the widest certification extents in the business. International Certification Corp, it is our definitive objective is to institute long term, trust-based associations with our clients. The expectation we set up with our clients is based on outstanding service, practical expertise and devotion to a certified value structure. Our passion is to grant our clients with best EMC / RF services by oriented knowledgeable and accommodating staff. Our Test sites are located at Linkou District and Kwei Shan Hsiang. Location map can be found on our website http://www.icertifi.com.tw. Linkou Kwei Shan Kwei Shan Site II Tel: 886-2-2601-1640 Tel: 886-3-271-8666 Tel: 886-3-271-8640 No. 30-2, Ding Fwu Tsuen, Lin Kou District, New Taipei City, Taiwan, R.O.C. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. No. 14-1, Lane 19, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. If you have any suggestion, please feel free to contact us as below information Tel: 886-3-271-8666 Fax: 886-3-318-0155 Email: [email protected] ══END══

Report No.: FR5O2304 Page : 1 of 33 Report Version: Rev. 02 FCC Test Report FCC ID : ZQ6-WMCT759B Equipment : CC2640RHB BLE module Model No. : WMCT-759B Brand Name : AMPAK Applicant : AMPAK Technology Inc. Address : No.1 Jen Ai Road, Hsinchu Industrial Park,Hukou, Hsinchu, Taiwan Standard : 47 CFR FCC Part 15.247 Received Date : Oct. 23, 2015 Tested Date : Jan. 06 ~ Jan. 07, 2016 We, International Certification Corp., would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It may be duplicated completely for legal use with the approval of the applicant. It shall not be reproduced except in full without the written approval of our laboratory. Approved & Reviewed by: Gary Chang / Manager Ty: XXX Report No.: FR5O2304 Page : 2 of 33 Report Version: Rev. 02 Table of Contents 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information .............................................................................................................................................. 5 1.2 Local Support Equipment List ................................................................................................................ 7 1.3 Test Setup Chart .................................................................................................................................... 7 1.4 Test Equipment List and Calibration Data .............................................................................................. 8 1.5 Test Standards ....................................................................................................................................... 9 1.6 Measurement Uncertainty ...................................................................................................................... 9 2 TEST CONFIGURATION ..................................................................................................................... 10 2.1 Testing Condition ................................................................................................................................. 10 2.2 The Worst Test Modes and Channel Details ....................................................................................... 10 3 TRANSMITTER TEST RESULTS ........................................................................................................ 11 3.1 Conducted Emissions ........................................................................................................................... 11 3.2 6dB and Occupied Bandwidth .............................................................................................................. 14 3.3 RF Output Power .................................................................................................................................. 16 3.4 Power Spectral Density ........................................................................................................................ 18 3.5 Emissions in Restricted Frequency Bands ........................................................................................... 20 3.6 Emissions in non-restricted Frequency Bands ..................................................................................... 30 4 TEST LABORATORY INFORMATION ............................................................................................... 33 Report No.: FR5O2304 Page : 3 of 33 Report Version: Rev. 02 Release Record Report No. Version Description Issued Date FR5O2304 Rev. 01 Initial issue Jan. 21, 2016 FR5O2304 Rev. 02 Revised brand name (Page 1) Jan. 25, 2016 Report No.: FR5O2304 Page : 4 of 33 Report Version: Rev. 02 Summary of Test Results FCC Rules Test Items Measured Result 15.207 AC Power Line Conducted Emissions [dBuV]: 21.830MHz 39.76 (Margin -10.24dB) - AV Pass 15.247(d) 15.209 Radiated Emissions [dBuV/m at 3m]: 2483.50MHz 71.97 (Margin -2.03dB) - PK Pass 15.247(b)(3) Maximum Output Power Power [dBm]: 5.05 Pass 15.247(a)(2) 6dB Bandwidth Meet the requirement of limit Pass 15.247(e) Power Spectral Density Meet the requirement of limit Pass 15.203 Antenna Requirement Meet the requirement of limit Pass Report No.: FR5O2304 Page : 5 of 33 Report Version: Rev. 02 1 General Description 1.1 Information 1.1.1 Specification of the Equipment under Test (EUT) RF General Information Frequency Range (MHz) Bluetooth Mode Ch. Freq. (MHz) Channel Number Data Rate 2400-2483.5 V4.1 LE 2402-2480 0-39 [40] 1 Mbps Note 1: Bluetooth LE (Low energy) uses GFSK modulation. 1.1.2 Antenna Details Ant. No. Brand Model Type Gain (dBi) Connector 1 YAGEO ANT8010LL04R2 400A Chip 0.5 N/A 1.1.3 Power Supply Type of Equipment under Test (EUT) Power Supply Type 3.3Vdc from host 1.1.4 Accessories N/A Report No.: FR5O2304 Page : 6 of 33 Report Version: Rev. 02 1.1.5 Channel List Frequency band (MHz) 2400~2483.5 Channel Frequency (MHz) Channel Frequency (MHz) Channel Frequency (MHz) Channel Frequency (MHz) 37 2402 9 2422 18 2442 28 2462 0 2404 10 2424 19 2444 29 2464 1 2406 38 2426 20 2446 30 2466 2 2408 11 2428 21 2448 31 2468 3 2410 12 2430 22 2450 32 2470 4 2412 13 2432 23 2452 33 2472 5 2414 14 2434 24 2454 34 2474 6 2416 15 2436 25 2456 35 2476 7 2418 16 2438 26 2458 36 2478 8 2420 17 2440 27 2460 39 2480 1.1.6 Test Tool and Duty Cycle Test tool Btool, V1.40.12 Duty cycle of test signal (%) 66.82% Duty Factor (dB) 1.75 1.1.7 Power Setting Modulation Mode Test Frequency (MHz) 2402 2440 2480 GFSK/1Mbps Default Default Default Report No.: FR5O2304 Page : 7 of 33 Report Version: Rev. 02 1.2 Local Support Equipment List Support Equipment List No. Equipment Brand Model FCC ID Signal cable / Length (m) 1 Notebook lenovo 7673 DoC USB, 0.6m shielded. 2 Fixture AMPAK WMCT-759_EVB_V00 --- --- 3 Adapter lenovo 92P1156 --- --- Note: No. 1, No. 2, No. 3, and USB cable are provi…

Text truncated - open the document above for the full version.

Report No.: FR5O2304 Page: : 1 of 6 Report Version: Rev. 01 Photographs of the Test Configuration Conducted Emission Test Report No.: FR5O2304 Page: : 2 of 6 Report Version: Rev. 01 Conducted Emission Test Report No.: FR5O2304 Page: : 3 of 6 Report Version: Rev. 01 Radiated Emission Below 1GHz Test Report No.: FR5O2304 Page: : 4 of 6 Report Version: Rev. 01 Radiated Emission Below 1GHz Test Report No.: FR5O2304 Page: : 5 of 6 Report Version: Rev. 01 Radiated Emission Above 1GHz Test Report No.: FR5O2304 Page: : 6 of 6 Report Version: Rev. 01 Radiated Emission Above 1GHz Test