ZRCGEPBT50606ABLUETOOTH PORTABLE SPEAKER

Parts: Charge: Initial set up via Bluetooth 1. Turn on the Bluetooth™ Speaker by pressing up top control panel. 2. Wait for approximately 10 seconds,the speaker will go into pairing mode and will produce a “beep”tone.The bottom red led lig ht will flash. 3. Turn on a device such as an ipod,iphone or mp3 device and go to:Setting>General>Bluetooth.Click on the bluetooth GP-508 will then appear on the device.Click on the GP-508. The device is now connected and paired with the speaker.If the device prompts f or a pair code,enter:”0000” 4. If pairing is not successful within 150seconds,the system will search for the last paired device.To restart the pairing proc ess,turn off the speaker and repeat step 1.If the initial set up connection is succesful,the next time the speaker is turned on ,the speaker will automatically pair to the last device it was connected with. 5. Touch V+ for 1 second to increase the volume.When maximum volume has been reached, a tone indicator will sound. 6. Touch V- for 1 second to decrease the volume.When minimal volume has been reached ,a tone indicator will sound. 7. Touch for 1 second to listen to the next song. 8. Touch for 1 second to listen to the previsous song. NOTE: 1. The bluetooth speaker only connect s to one device at a time.Turn off the bluetoot h speaker in order to pair the device with another bluetooth device. 2. The maximum transmission betw een the bluetooth speaker and a device is 10 meters or 32 feet. 3. Interference may occur duri ng playback when using the bluet ooth function near other wirel ess devices.If playback through blu etooth is problematic,move the bluetooth speaker and the playback device to a different location,or use the 3.5mm audio cable jack instead of the bluetooth function. WARNING: The built-in rechargeable battery is not replaceable.Do not remo ve or replace battery.Dispose of unit properly.Do not dispose u nit in trash or fire. Connecting with an audio cable The bluetooth connection can be switched to a wired connection by plugging in the 3.5mm audio jack. The volume key function will be available in the wired connection mode.Simply unplug the 3.5mm audio jack to revert back to the bluetooth connection. BLUE TOOTH SPEAKER MANUAL 1,Previous song 2,Volum+ 3.Volum – 4,Next song 5,Audio line in jack 6,USB charge port 7,ON/OFF Fully charge the speaker before use. Connect the speaker to the PC C via provided USB cable When the bottom RED LED flash approximately 15 times, it means the battery is low, please recharge the speaker. The solid RED L ED will appear when speaker is on charged. The RED LED goes out when charge is finished Specification Rating Power: 2.4w x 2pcs Max power: 3w x 2pcs Signal To Noise Ratio: >88dB Frequency Response: 100Hz-20kHz Distortion: <10% Battery Li-ion: 3.7v Battery Capacity: 900mAh Battery Charging Voltage: 5V Charger Time: 3 hours max Playbackt time: 5hours Driver Unit: 40mm, 4 Ohm ,Power: 2.4 W Dimension: 13x6x5.5 cm Transmission Distance: 10m Work Frequency: 2.402-2.480GHz Bluetooth Model: V3.0+EDR Making and accepting a phone call (built in mic) The exchange Bluetooth speaker has a built-in Microphone, you can make and accept calls via the speaker using Bluetooth. 1, To answer a call: When you have a call, please press the PLAY/PAUSE key. If you don't want to answer the call please do not press down PLAY/PAUSE key. 2, To make a call : Press down PLAY/PAUSE key for 2 seconds, your phone will Auto-dial the last phone number Press down PLAY/PAUSE key shortly twice and your phone will go into in voice control dialing mode. (assuming your cell phone has a voice control application ) 3. Volume control: When you are in call, you can adjust the volume via the speaker. FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may c ause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particu lar installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipme nt off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interf erence that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to oper ate the equipment.

GEP TECHNOLOGY CO.,LIMITED RM2103 EASEY COMMERCIAL BUILDING 253-261 HENNESSY ROAD WANCHAI HongKong DATE :2013-02-19 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint Hans.Hu of Global United Technology Services Co., Ltd. 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District Shenzhen Guangdong to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with GEP TECHNOLOGY CO.,LIMITED and RM2103 EASEY COMMERCIAL BUILDING 253-261 HENNESSY ROAD WANCHAI HongKong Dated this / Day of 02/19/2013 / Agency agreement expiration date: 02/19/2014 By: ERIN ZHONG Signature Printed Title: Sales Manager On behalf of : GEP TECHNOLOGY CO.,LIMITED Telephone: 852-81219610

GEP TECHNOLOGY CO.,LIMITED RM2103 EASEY COMMERCIAL BUILDING 253-261 HENNESSY ROAD WANCHAI HongKong 2013-02-19 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: ZRCGEPBT50606A Product Name: BLUETOOTH PORTABLE SPEAKER Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: • Schematics • Block diagram • Operational Description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 02/19/2013 By: ERIN ZHONG Signature Printed Title: Sales Manager On behalf of : GEP TECHNOLOGY CO.,LIMITED Telephone: 852-81219610

Label size Length=20mm, Width=45mm Product name: BLUETOOTH PORTABLE SPEAKER Model No.: GP-506 FCC ID: ZRCGEPBT50606A This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that may cause undesired operation.

Label location

Global United Technology Services Co., Ltd. Report No.: GTSE13010001701 Authorized Signature: Robinson Lo Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the GTS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of GTS International Electrical Approvals or testing done by GTS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by GTS International Electrical Approvals in writing. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” Page FCC REPORT Applicant: GEP TECHNOLOGY CO.,LIMITED Address of Applicant: RM2103 EASEY COMMERCIAL BUILDING 253-261 HENNESSY ROAD WANCHAI HongKong Equipment Under Test (EUT) Product Name: BLUETOOTH PORTABLE SPEAKER Model No.: GP-506 FCC ID: ZRCGEPBT50606A Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.249:2012 Date of sample receipt: January 06, 2013 Date of Test: January 07-February 18, 2013 Date of report issued: February 19, 2013 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTSE13010001701 Global United Technology Services Co., Ltd. Project No.: GTSE130100017RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 32 2 Version Version No. Date Description 00 February 19, 2013 Original Prepared By: Date: February 19, 2013 Project Engineer Check By: Date: February 19, 2013 Reviewer Report No.: GTSE13010001701 Global United Technology Services Co., Ltd. Project No.: GTSE130100017RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 32 3 Contents Page 1 COVER PAGE............................................................................................................................................ 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 CLIENT INFORMATION......................................................................................................................... 5 5.2 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.3 TEST MODE........................................................................................................................................ 7 5.4 DESCRIPTION OF SUPPORT UNITS....................................................................................................... 7 5.5 TEST FACILITY.................................................................................................................................... 7 5.6 TEST LOCATION................................................................................................................................. 7 5.7 OTHER INFORMATION REQUESTED BY THE CUSTOMER......................................................................... 7 6 TEST INSTRUMENTS LIST ..................................................................................................................... 8 7 TEST RESULTS AND MEASUREMENT DATA...................................................................................... 9 7.1 ANTENNA REQUIREMENT:.................................................................................................................... 9 7.2 CONDUCTED EMISSIONS................................................................................................................... 10 7.3 RADIATED EMISSION METHOD........................................................................................................... 13 7.3.1 Field Strength of The Fundamental Signal ................................................................................ 15 7.3.2 Spurious emissions.................................................................................................................... 16 7.3.3 Bandedge emissions.................................................................................................................. 20 7.4 20DB OCCUPY BANDWIDTH.............................................................................................................. 21 8 TEST SETUP PHOTO ............................................................................................................................ 23 9 EUT CONSTRUCTIONAL DETAILS ...............................................................................................…

Text truncated - open the document above for the full version.

Radiated Emission Conducted Emission