ZRR-SA103S2.1 CH 3D soundbar with subwoofer

- 6 - PACKAGE CONTENTS Soundbar (1) Remote Control(1) Optical cable(1x4.92ft) AUX cable(1x2.62ft) Screw bag(1) Wall Mount TemplatePlus Bracket (1 set) - 7 - Posi�oning the Sound Bar Place on a flat Surface Place the sound bar horizontally on a flat surface such as a TV unit or shelves and align it centrally with the TV screen. Allow some space between the speaker and the wall. Don’t place inside a cabinet or an a walled shelf. Follow this guidance for best sound output and good airflow around the sound bar. Detachable Design 1. Plug the audio connector into the audio input port on another main unit; 2. Align the arrow on the s�cker to the other main unit's edge; 3. Merge the two main units 4. Move the two main units to one line un�l it locks securely Note: The soundbar will not work when split and audio connector unplugged. Mount on the wall WARNING: If you don’t feel confident to correctly and securely wall-mount the sound bar, seek the assistance of an experienced person of professional. Insert the two wall-mount screws into the wall, refer to wall moun�ng template we supplied in package for the distance. Install the speaker on a ver�cal, fast, reinforced area of wall. For plaster walls, it is recommended to screw into wa ll studs for greater security. For op�mum performance, allow at least 30mm distance between the sound bar and the TV. Follow below steps to mount the sound bar on the wall 1. Make 2 holes on the wall with distance same as the wall bracket on the soundbar, refer to wall moun�ng template to make it correct easily. 2. Put the plas�c anchors onto the wall and secure the screws to the plas�c clip, do not � ghten the screws all the way make sure leave some space. 3. Once the screws securely fastened, hang the sound bar over by inser�ng the screws onto the wall mount bracket. 4. We also provide one set of plus bracket in case you need more distance between wall and soundbar when you use HDMI or Op�cal cable, only move the screw of original bracket on the soundbar and exchange the plus set. - 8 - - 9 - - 10 - Playing Audio via USB Port 1.Ensure that your USB flash drive contains MP3 or WMA audio files (other file types not supported). 2.Connect the USB flash drive to the USB port on the sound bar (or your own USB extension cable connected to the USB port); 3. Select USB mode by short press USB on remote control; 4. The remote control includes USB input mode playback controls. Op�cal Mode You can connect digital amplifiers or TV with an op�cal digital output to the sound bar via op�cal cable. . Proceed as follows: •Conne ct the op�cal cable to the op�cal digital output of your output device. •The n connect the op�cal cable to soundbar. •Pre ss OP on the remote control to select op�cal mode. •Start playing on the output device. •Using the na�ve controls on your connected device, ensure the audio se�ngs are set to PCM or Op�cal Audio. HDMI Mode 1.The Soundbar supports HDMI with Audio Return Channel(ARC). lf your TV is HDMI(ARC) compliant, you can hear the TV audio through your Soundbar by using a single HDMI cable. 2.Using a High Spe ed HDMI cable, connect the HDMI(ARC) connector on the soundbar to the HDMI (ARC) connector on the TV. The HDMI(ARC) connector on the TV might be labelled differently. For details, see the TV user manual. 3.By using HDMI conne c�on, you can control soundbar vol+/- through TV remote control. Important Notes: 1.Enable Consume r Electronics Control(CEC) on your TV; Only HDMI ARC connec�ons needs to enable CEC. 2.The se are names different brands might use for HDMI-CEC: Samsung (Anynet+++), Vizio(CEC),Sony(Bravia Sync), LG(SimpLink), Sharp(Aquos Link), Philips (EasyLink), Roku(1-Touch Play) Specifica�ons Model L210 TechnologyBT/AUX/HDMI(ARC)/OPTICAL/USB Frequency Response60Hz-20KHz Power Input100V-240V~50Hz/60Hz Bluetooth VersionVersion: 5.0 Range:up to 10m Bluetooth Frequency2402MHz - 2480MHz DimensionsSoundbar:30.98*2.36*4.13 inch Subwoofer: 5.9*5.9*15.74 inch Trouble shoo�ng IssuesProblemsSolu�ons Sound No sound from SoundBar speakers Connect the audio cable from your soundbar to your TV or other devices. However, you do not need a separate audio connec�on when the Soundbar and TV are connected through HDMI ARC connec�on On the remote control, select the correct audio input. Distorted sound or echolf you play audio from the TV through the soundbar, make sure that the TV is muted. Bluetooth A device cannot connect with the SoundBar Restart the soundbar and try pairing again You have not enabled the bluetooth func�on of the device. See the user manual of the device on how to enable the func�on. The device is not correctly connected. The soundbar is already connected with another bluetooth device. Disconnect the connected device, then try again. Quality of audio play from a connected Bluetooth device is poor. The bluetooth recep�on is poor. Move the device closer to the soundba r, or remove any obstacle between the device and the soundbar. The connected Bluetooth device connects and disconnects constantly The bluetooth recep�on is poor. Move the device closer to the soundbar, or remove any obstacle between the device and the soundbar. we will support you in shortest �me. Remark: Once a ddi�onal informa�on needed, please kindly contact [email protected] -11 - FCC Compliance NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec�on against harmful interference in a residen�al installa�on. This equipment generates uses and can radiate radio frequency energy and, if not installed and Thank you for purchasing the home theater L210 Soundbar. Please read this user manual carefully and keep for future reference. To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No user-serviceable parts inside.Refer servicing to qualified personnel only The lightning …

Text truncated - open the document above for the full version.

Shenzhen Adition Audio Science & Technology Co.,Ltd 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Shenzhen Adition Audio Science & Technology Co.,Ltd Address: Floor1-5, No.2 Building, Huidebao Industrial Park, No.11,Second Industrial Zone, Baihua Community, Guangming Sub-district, Guangming District, Shenzhen, China Product Name: 2.1 CH 3D soundbar with subwoofer FCC ID: ZRR-SA103S Model(s): SA103S, L210 2.911(d)(5)(i) Equipment Type We, [Shenzhen Adition Audio Science & Technology Co.,Ltd ] (“the applicant”) certify that the equipment for which authorization is sought through certification is not: • Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Zhengxin Miao Date: 2023-0 4-10 Title and Company name: General Manager NOTE 1 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen Adition Audio Science & Technology Co.,Ltd 2.911 (d)(5)(ii) Applicant Attestation v1.2 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Shenzhen Adition Audio Science & Technology Co.,Ltd Address: Floor1-5, No.2 Building, Huidebao Industrial Park, No.11,Second Industrial Zone, Baihua Community, Guangming Sub-district, Guangming District, Shenzhen, China Product Name: 2.1 CH 3D soundbar with subwoofer FCC ID: ZRR-SA103S Model(s): SA103S, L210 2.911(d)(5)(ii) Applicant filing We, [Shenzhen Adition Audio Science & Technology Co.,Ltd ] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Zhengxin Miao Date: 2023-04-10 Title and Company name: General Manager NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen Adition Audio Science & Technology Co.,Ltd 2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: Shenzhen Adition Audio Science & Technology Co.,Ltd Address: Floor1-5, No.2 Building, Huidebao Industrial Park, No.11,Second Industrial Zone, Baihua Community, Guangming Sub-district, Guangming District, Shenzhen, China Product Name: 2.1 CH 3D soundbar with subwoofer FCC ID: ZRR-SA103S Model(s): SA103S, L210 2.911(d)(7) USA Designated Agent for Service of Process We, [Shenzhen Adition Audio Science & Technology Co.,Ltd] (“the applicant”) designate [Keenetic Information Technology Inc] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Keenetic Information Technology Inc Address: 18300 S. Wilmingto Avenue Suite 150 Rancho Dominguez, CA 90220 United States FRN: 0033494063 Contact Name: Danny Miao Telephone No: (310) 408-5690 Email: [email protected] Applicant Company name: Shenzhen Adition Audio Science & Technology Co.,Ltd Address: Floor1-5, No.2 Building, Huidebao Industrial Park, No.11,Second Industrial Zone, Baihua Community, Guangming Sub-district, Guangming District, Shenzhen, China FRN: 0021018981 FCC Grantee Code: ZRR Contact Name: Zhengxin Miao Telephone No: 86 755 27405088-22 Email: [email protected] Shenzhen Adition Audio Science & Technology Co.,Ltd 2.911 (d)(7)USA Agent v1.2 Signature: Title: General Manager Signature: Title: General Manager Date: 2023-04-10 Date: 2023-04-10 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-t o-the-communications-supply-chain-through-the

Differences Declaration To whom concern, We company Shenzhen Adition Audio Science & Technology Co.,Ltd Here by declares: The product model(s) L210 is the same PCB layout, electronic schematic and Antenna with SA103S, the only differences between them are model names, others are same. Sincerely yours, Name (in print): Zhengxin Miao Company name: Shenzhen Adition Audio Science & Technology Co.,Ltd Company address: Floor1-5, No.2 Building, Huidebao Industrial Park, No.11,Second Industrial Zone, Baihua Community, Guangming Sub-district, Guangming District, Shenzhen, China

Shenzhen Adition Audio Science & Technology Co.,Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023-04-10 Subject; Request for Long Term Confidentiality FCC ID: ZRR-SA103S To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram BOM Operational Description It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Zhengxin Miao Title: General Manager

Letter of Authorization Company: Shenzhen Adition Audio Science & Technology Co.,Ltd Address: Floor1-5, No.2 Building, Huidebao Industrial Park, No.11,Second Industrial Zone, Baihua Community, Guangming Sub-district, Guangming District, Shenzhen, China Product Name: 2.1 CH 3D soundbar with subwoofer Model Number: SA103S, L210 FCC Identifier: ZRR-SA103S We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Zhengxin Miao Date: 2023-0 4-10 Title: General Manager

Test Report Number: BTF-SZ230301R-007 External Test Report Number: BTF-SZ230301R-007 Test Report Number: BTF-SZ230301R-007 Test Report Number: BTF-SZ230301R-007

SA103S L210 LARKSOUND AD AD ZLD22085-10 A0 2022-12-26 声霸机身贴 498-SA10300 胡晨 文字拟制： 尺寸：40*40mm按刀模线 0.054mm珠光膜背106胶黑底白字印刷上光膜 2:1放大图 1:1图 40mm 40mm 12/2022 Made In China FCC ID:ZRR-SA103S 2.1 CH 3D soundbar with subwoofer Model No: SA103S AC Input: 100V-240V ~50/60Hz 1.5A This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC. 12/2022 Made In China FCC ID:ZRR-SB930 2.1CH 3D Soundbar Model No: L200M AC Input: 100V-240V ~50/60Hz This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC. 12/2022 Made In China FCC ID:ZRR-SA103S 2.1 CH 3D soundbar with subwoofer Model No: SA103S AC Input: 100V-240V ~50/60Hz 1.5A This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC.

Test Report Number: BTF-SZ230301R-007 Internal Test Report Number: BTF-SZ230301R-007 Test Report Number: BTF-SZ230301R-007

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Exposure Report For Applicant Name: Shenzhen Adition Audio Science & Technology Co.,Ltd Address: Floor1-5, No.2 Building, Huidebao Industrial Park, No.11,Second Industrial Zone, Baihua Community, Guangming Sub-district， Guangming District, Shenzhen, China EUT Name: 2.1 CH 3D soundbar with subwoofer Brand Name: Larksound Model Number: SA103S Series Model Number: Refer to section 2 Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF-SZ230301R-009 Test Standards: 47 CFR Part 2 Subpart J Section 2.1091 FCC ID: ZRR-SA103S Test Conclusion: Pass Test Date: 2023-03-18 to 2023-03-26 Date of Issue: 2023-03-27 Prepared By: Gavin Cui / Project Engineer Date: 2023-03-27 Approved By: Ryan.CJ / EMC Manager Date: 2023-03-27 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF-SZ230301R-009 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2023-03-27 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF-SZ230301R-009 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1. Introduction............................................................................................................................................................................................ 4 1.1 Identification of Testing Laboratory ................................................................................................................................. 4 1.2 Identification of the Responsible Testing Location ...................................................................................................... 4 1.3 Laboratory Condition ........................................................................................................................................................... 4 1.4 Announcement ....................................................................................................................................................................... 4 2. Product Information .............................................................................................................................................................................. 5 2.1 Application Information ....................................................................................................................................................... 5 2.2 Manufacturer Information .................................................................................................................................................... 5 2.3 Factory Information .............................................................................................................................................................. 5 2.4 General Description of Equipment under Test (EUT)................................................................................................... 5 3. REQUIREMENT ................................................................................................................................................................................... 6 3.1 Assessment Result ............................................................................................................................................................... 6 Test Report Number: BTF-SZ230301R-009 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 4 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China 1. Introduction 1.1 Identification of Testing Laboratory Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Phone Number: +86-0755-23146130 Fax Number: +86-0755-23146130 1.2 Identification of the Responsible Testing Location Test Location: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Description: All measurement facilities used to collect the measurement data are located at F101,201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China FCC Registration Number: 518915 Designation Number: CN1330 1.3 Laboratory Condition Ambient Temperature: 20°C to 25°C Ambient Relative Humidity: 45% to 55% Ambient Pressure: 100 kPa to 102 kPa 1.4 Announcement (1) The test report reference to the report template version v0. (2) The test report is invalid if not marked wit…

Text truncated - open the document above for the full version.

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 57 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Test Report For Applicant Name: Shenzhen Adition Audio Science & Technology Co.,Ltd Address: Floor1-5, No.2 Building, Huidebao Industrial Park, No.11,Second Industrial Zone, Baihua Community, Guangming Sub-district， Guangming District, Shenzhen, China EUT Name: 2.1 CH 3D soundbar with subwoofer Brand Name: Larksound Model Number: SA103S Series Model Number: Refer to section 2 Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF-SZ230301R-008 Test Standards: 47 CFR Part 15.247 Test Conclusion: Pass Test Date: 2023-03-18 to 2023-03-26 Date of Issue: 2023-03-27 FCC ID: ZRR-SA103S Prepared By: Gavin Cui / Project Engineer Date: 2023-03-27 Approved By: Ryan.CJ / EMC Manager Date: 2023-03-27 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF-SZ230301R-008 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 57 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2023-03-27 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF-SZ230301R-008 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 57 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1 INTRODUCTION ..........................................................................................................................................5 1.1 Identification of Testing Laboratory ...............................................................................................5 1.2 Identification of the Responsible Testing Location ......................................................................5 1.3 Announcement .................................................................................................................................5 2 PRODUCT INFORMATION..........................................................................................................................6 2.1 Application Information ...................................................................................................................6 2.2 Manufacturer Information ................................................................................................................6 2.3 Factory Information .........................................................................................................................6 2.4 General Description of Equipment under Test (EUT) ...................................................................6 2.5 Technical Information ......................................................................................................................6 3 SUMMARY OF TEST RESULTS .................................................................................................................7 3.1 Test Standards ..................................................................................................................................7 3.2 Uncertainty of Test ...........................................................................................................................7 3.3 Summary of Test Result ..................................................................................................................7 4 TEST CONFIGURATION .............................................................................................................................8 4.1 Test Equipment List .........................................................................................................................8 4.2 Test Auxiliary Equipment ..............................................................................................................12 4.3 Test Modes ......................................................................................................................................12 5 EVALUATION RESULTS (EVALUATION) .................................................................................................13 5.1 Antenna requirement .....................................................................................................................13 5.1.1 Conclusion: ...........................................................................................................................13 6 RADIO SPECTRUM MATTER TEST RESULTS (RF) ...............................................................................14 6.1 Conducted Emission at AC power line ........................................................................................14 6.1.1 E.U.T. Operation: ..................................................................................................................14 6.1.2 Test Setup Diagram: .............................................................................................................14 6.1.3 Test Data: ..........................................................................…

Text truncated - open the document above for the full version.

ReportNo.:RFI-LAB-RF-202212-LL15 QP030-E41 Page1of9 TestingReport CustomerName:ShenzhenAditionAudioScience&TechnologyCo.,Ltd ProductName:PCBantenna SampleModel:/ ReferenceStandard:GB/T9410-2008;ANSI/IEEEStd149-1979 IssueDate:2022.12.16 Engineer:Date: Auditor:Date: Approver:Date: ReportNo.:RFI-LAB-RF-202212-LL15 QP030-E41 Page2of9 Version VersionNo.DateDescriptionFormulateApproval A02022.12.16Forthefirsttime,formulateJacksonEason Contents 1.GeneralInformation.........................................................................................................................3 1.1Generalinformationoftestinginstitutions...........................................................................3 1.2Testingprinciple...................................................................................................................3 1.3Testequipment......................................................................................................................4 1.4Testenvironment...................................................................................................................4 1.5Statement..............................................................................................................................4 2.SampleInformation..................................................…

Text truncated - open the document above for the full version.