ZVP-V32GSM Mobile Phone

2 INSERT SIM CARD Fig. 1: Remove battery cover (as shown).Fig. 2: Slide SIM card in with the gold contact faci ng down. 3 INSERT BATTERY AND CHARGING ƒ Fig. 3: Insert battery (gold contacts on right fro nt side). ƒ Fig. 4: Close battery door: slide cover to closed position with a ‘click’. ƒ Fig. 5: Plug charging cable into the socket on the lower narrow side of the phone or Fig. 6: in the plug on the back of the desktop charger ƒ Charging: Battery indication bars in upper right c orner of the display are moving ƒ The led on the upper side of the closed phone is o n. ƒ Full battery: Bars in upper right display corner are solid . Note: Charge battery for at least 2 hours before fi rst use ! 4 DISPLAY SYMBOLS (SCREEN) 5 FIRST STEPS Switch on the phone by pressing the power on/off-key for at least 2 seconds. Switch off by pressing power on/off for 2 seconds again. When using a new SIM card, enter the 4 digit PIN Code (Personal Identification Number) and confirm with . PIN-Code: The PIN-Code is a 4-digit number combination preventing others from switching on your mobile pho ne. ƒ Switch off your PIN-Code: In menu: Settings Æ Security Settings Æ PIN Æ PIN off. Entering Menu : ƒ Press - key. ƒ Scroll through menu points: with and . ƒ Confirm: with . Note: due to inactivity, the phone lights and scree n turn off after a while. To turn on again, press any key. Incoming Call:ƒ Pick up call: Press - key. ƒ Reject call: Press - key. End call : Press - key. Dial: Enter the telephone number via the keypad (includin g area code with 0) - start call with . Redial list: press - key, scroll through call list with (all dialled, missed and received calls) and select a nu mber and start call with . Handsfree Speaking: During a call handsfree function can be switched on or off: press Options Æ Handsfree. Fig 5 Fig 4 Fig 1 Fig 2 Fig 3 Fig 6 battery strength new SMS ringtone off earphone missed call signal strength Roaming mode alarm on call diversion 6 PHONE BOOK Saving names and numbers (start with international prefix, e.g. +44 for UK).Enter menu in standby modus (Standby-Modus: chapter 5) with , then , , , Æ Menu-Points: Search name, Add contact, Own Number, Emergency numbers (add, change, delete, status on/off) , Copy All, Edit Contact, Delete, Settings ; Storing phone book entries (Name & Number): Enter menu with Æ continue to Phone book : , , , Æ continue to Add contact : , Æ Enter name via the keypad (See chapter 8, Write SMS for text entry), , Æ Enter number, and to Save . Searching phone book entries : Open the phone book with : ƒ Scroll through the entries with and . Or: ƒ Search names: enter the initial letters of the sea rched name via the keypad (scroll through with ). When the requested name is shown, press to start a call. 7 EMERGENCY FUNCTIONYou can store a total of 5 emergency numbers (family, neighbours, friends, emergency services). In case o f emergency these preselected numbers will be dialed automatically in a sequence, if the emergency key o n the back of the phone gets pressed and held.A continuous warning tone then starts in “loudspeak er mode” during emergency, so you and people nearby are warn ed due to the emergency! If the first number cannot be reached, the second number will be called automatically. If the second number in row cannot be reached, the third will be called. (max. 3 rotations of the 5 numbers). Note: To avoid getting caught on a mailbox, the rea ched person has to confirm your emergency by calling back. If no emergency number is saved or if your calling card has expired or you have no access to a foreign network (e.g. roaming not permitted), 112 will be dialed.Saving emergency numbers: Enter menu Æ Phone book Æ Emergency numbers Æ Add emergency number Æ choose Emergency number (1-5) Æ pick contact from phone book Æ done Note: select emergency number: private number (has to confirm as explained above) or official service num ber, f.i.: ambulance, police, etc. (no confirmation call required ). Switch emergency function On / Off: In menu Phone book Æ Emergency numbers Æ Status Æ On / Off. Note: If you want to save emergency numbers from of ficial services, police, fire department, etc., you have t o clarify this with the certain institution. No liability will be assumed for possible costs incurred if you dial accidentally. 8 SMS MESSAGES SMS (Short Message Service) are written messages with a maximum of 160 characters.Receive SMS : A short signal and a registration on the display inform you about a new, incoming SMS messag e. With you can read the message immediately or see a list of messages which have already been received in the menu Messages Æ SMS Æ Received SMS . Write SMS : Enter menu with Æ Messages Æ SMS Æ Write new SMS: The text entry is done by the keypad. (e.g. 2x , 2x , 3x , 3x , 3x for Hello). Each key carries several characters, appearing by multiple presses.Switch between different entry methods by pressing : abc -only small ABC -only CAPITAL 123 -Numbers Send SMS : Select Send with 2x and enter number or select from phone book (2x , select contact with ). Press to send SMS. 9 MMS MESSAGES MMS (Multimedia Message Service) are messages incl. pictures, audio, etc. First time use: Menu Æ MMS Æ MMS Settings Æ MMS account Æ choose operator Send MMS : enter Menu with Æ Messages Æ MMS Æ Create new MMS:1. (Edit) Æ Add number: Enter number/ select phone book entry Æ 2. to Subject (this will be the headline of the message) Æ (Edit) Æ Insert message text Æ (Done). 3. Edit content: 1x Æ (Edit) Æ Insert text or picture: (Options) Æ to Add picture : Æ open phone: Æ open pictures: Æ scroll to picture with Æ choose picture with Æ Æ (done). If you have problems at the first time sending MMS, contact your operator to check MMS settings. 10 CAMERA: Take picture : press camera-button Æ picture detail OK, press , store with Camera settings : , : Settings, picture size, white balance Picture gallery : menu Æ select picture, scroll to next picture with . ƒ Pictures: Æ option: V…

Text truncated - open the document above for the full version.

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ110921001-00-22H&24E FCC Part 22H/24E Page 1 of 4 EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS EUT – Top View EUT – Bottom View Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ110921001-00-22H&24E FCC Part 22H/24E Page 2 of 4 EUT –Left Side View EUT – Right Side View Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ110921001-00-22H&24E FCC Part 22H/24E Page 3 of 4 EUT –Port View EUT – Unfolded View Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ110921001-00-22H&24E FCC Part 22H/24E Page 4 of 4 EUT – Adapter View EUT – Adapter Label View

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ110921001-00-22H&24E FCC Part 22H/24E Page 1 of 1 EXHIBIT A - FCC ID LABELING AND LOCATION FCC ID Label Proposed FCC ID Label Location Label here The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ110921001-00-22H&24E FCC Part 22H/24E Page 1 of 7 EXHIBIT C - EUT INTERNAL PHOTOGRAPHS EUT – Battery off View EUT – Cover off View Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ110921001-00-22H&24E FCC Part 22H/24E Page 2 of 7 EUT – Main Board Top View BT antenna Location GSM antenna Location EUT – Main Board Top without Antenna View Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ110921001-00-22H&24E FCC Part 22H/24E Page 3 of 7 EUT – Main Board Shielding off Top View EUT – Main Board Bottom View Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ110921001-00-22H&24E FCC Part 22H/24E Page 4 of 7 EUT – LCD Top View EUT – LCD Bottom View Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ110921001-00-22H&24E FCC Part 22H/24E Page 5 of 7 EUT – BT Antenna View EUT – GSM Antenna View Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ110921001-00-22H&24E FCC Part 22H/24E Page 6 of 7 EUT – Battery View Adapter – Main Board Top View Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ110921001-00-22H&24E FCC Part 22H/24E Page 7 of 7 Adapter – Main Board Bottom View

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP* or any agency of the Federal Government. * This report contain data that are not covered by the NVLAP accreditation and are marked with an asterisk “★＂ (Rev.2) SAR EVALUATION REPORT For Emporia Telecom USA Inc. 321 E. Glen Ave, Ridgewood, NJ, United States FCC ID: ZVP-V32 Report Type: Original Report Product Type: GSM Mobile Phone Test Engineer: Sandy Wang Report Number: RSZ110921001-20 Report Date: 2011-10-28 Reviewed By: Merry Zhao EMC Engineer Test Laboratory: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F, the 3rd Phase of WanLi Industrial Building, ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp.(Shenzhen) Report No:RSZ110921001-20 SAR Evaluation Report 2 of 78 Attestation of Test Results Company Name Emporia Telecom USA Inc. EUT Description GSM Mobile Phone FCC ID ZVP-V32 Model Number V32 EUT Information Test Date 2011.10.24--2011.10.25 Frequency Max. SAR Level(s) Measured Limit(W/Kg) Cellular Band 0.089 W/kg 1g Head Tissue 1.468 W/kg 1g Body Tissue PCS Band 0.086 W/kg 1g Head Tissue 0.245 W/kg 1g Body Tissue 1. 6 ANSI / IEEE C95.1 : 2005 IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fileds,3 kHz to 300 GHz ANSI / IEEE C95.3 : 2002 IEEE Recommended Practice for Measurements and Computations of Radio Frequency Electromagnetic Fields With Respect to Human Exposure to SuchFields,100 kHz—300 GHz. OET BULLETIN 65 SUPPLEMENT C Evaluating Compliance with FCC Guidelines for Human Exposure To Radiofrequency Electromagnetic Fields Applicable Standards IEEE1528:2003 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques Note: This wireless device has been shown to be capable of compliance for localized specific absorption rate (SAR) for General Population/Uncontrolled Exposure limits specified in ANSI/IEEE Standards and has been tested in accordance with the measurement procedures specified in FCC OET 65 Supplement C and IEEE 1528-2003. The results and statements contained in this report pertain only to the device(s) evaluated. Bay Area Compliance Laboratories Corp.(Shenzhen) Report No:RSZ110921001-20 SAR Evaluation Report 3 of 78 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ............................................................................................................................ 4 EUT DESCRIPTION........................................................................................................................................................ 5 TECHNICAL SPECIFICATION............................................................................................................................................. 5 REFERENCE, STANDARDS, AND GUILDELINES ................................................................................................. 6 SAR LIMITS..................................................................................................................................................................... 7 FACILITIES AND ACCREDITATION ........................................................................................................................ 8 DESCRIPTION OF TEST SYSTEM ............................................................................................................................. 8 EQUIPMENT LIST AND CALIBRATION .................................................................................................................. 8 EQUIPMENTS LIST & CALIBRATION INFORMATION........................................................................................................ 8 SAR MEASUREMENT SYSTEM VERIFICATION .................................................................................................. 8 LIQUID VERIFICATION..................................................................................................................................................... 8 SYSTEM ACCURACY VERIFICATION................................................................................................................................8 SAR SYSTEM VALIDATION DATA.......................................................................................................................... 8 EUT TEST STRATEGY AND METHODOLOGY...................................................................................................... 8 TEST POSITIONS FOR DEVICE OPERATING NEXT TO A PERSON’S EAR........................................................................... 8 CHEEK/TOUCH POSITION................................................................................................................................................ 8 EAR/TILT POSITION......................................................................................................................................................... 8 TEST POSITIONS FOR BODY-WORN AND OTHER CONFIGURATIONS.................................................................................. 8 SAR EVALUATION PROCEDURE...................................................................................................................................... 8 CONDUCTED OUTPUT POWER MEASUREMENT ............................................................................................... 8 PROVISION APPLICABLE.................................................................................................................................................. 8 TEST PROCEDURE.......................................…

Text truncated - open the document above for the full version.

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP*, or any agency of the Federal Government. * This report contains data that are not covered by the NVLAP accreditation and are marked with an asterisk “★” (Rev.2) FCC PART 22H, PART 24E TEST REPORT For Emporia Telecom USA Inc. 321 E. Glen Ave, Ridgewood, NJ, United States FCC ID: ZVP-V32 Report Type: Original Report Product Type: GSM Mobile Phone Test Engineer: Allan An Report Number: RSZ110921001-00-22H&24E Report Date: 2011-11-01 Reviewed By: Alvin Huang EMC Engineer Test Laboratory: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F, the 3rd Phase of WanLi Industrial Building, ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ110921001-00-22H&24E FCC Part 22H/24E Page 2 of 30 TABLE OF CONTENTS GENERAL INFORMATION.......................................................................................................................................4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .....................................................................................4 OBJECTIVE...................................................................................................................................................................4 RELATED SUBMITTAL(S)/GRANT(S).............................................................................................................................4 TEST METHODOLOGY..................................................................................................................................................4 TEST FACILITY.............................................................................................................................................................5 SYSTEM TEST CONFIGURATION ..........................................................................................................................6 JUSTIFICATION.............................................................................................................................................................6 EQUIPMENT MODIFICATIONS.......................................................................................................................................6 LOCAL SUPPORT EQUIPMENT LIST AND DETAILS........................................................................................................6 CONFIGURATION OF TEST SETUP.................................................................................................................................7 BLOCK DIAGRAM OF TEST SETUP................................................................................................................................7 SUMMARY OF TEST RESULTS ...............................................................................................................................8 FCC §1.1307 & §2.1093 - RF EXPOSURE..................................................................................................................9 APPLICABLE STANDARD..............................................................................................................................................9 TEST RESULT...............................................................................................................................................................9 FCC §2.1047 - MODULATION CHARACTERISTIC ............................................................................................10 FCC § 2.1046, § 22.913 (A) & § 24.232 (C) - RF OUTPUT POWER......................................................................11 APPLICABLE STANDARD............................................................................................................................................11 TEST PROCEDURE......................................................................................................................................................11 TEST EQUIPMENT LIST AND DETAILS.........................................................................................................................11 TEST DATA................................................................................................................................................................12 FCC §2.1049, §22.917, §22.905 & §24.238 - OCCUPIED BANDWIDTH ..............................................................14 APPLICABLE STANDARD............................................................................................................................................14 TEST PROCEDURE......................................................................................................................................................14 TEST EQUIPMENT LIST AND DETAILS.........................................................................................................................14 TEST DATA................................................................................................................................................................14 FCC §2.1051, §22.917(A) & §24.238(A) - SPURIOUS EMISSIONS AT ANTENNA TERMINALS ..................18 APPLICABLE STANDARD............................................................................................................................................18 TEST PROCEDURE......................................................................................................................................................18 TEST EQUIPMENT LIST AND DETAILS...................................................................................................................…

Text truncated - open the document above for the full version.

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ110921001-00-22H&24E FCC Part 22H/24E Page 1 of 3 EXHIBIT D - TEST SETUP PHOTOGRAPHS Below 1GHz: Radiated Emissions - Front View Below 1GHz: Radiated Emissions - Rear View Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ110921001-00-22H&24E FCC Part 22H/24E Page 2 of 3 Above 1GHz: Radiated Emissions - Front View Above 1GHz: Radiated Emissions - Rear View Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ110921001-00-22H&24E FCC Part 22H/24E Page 3 of 3 Frequency Stability Test View