ZYQ-HHK13CTABLET

Product Notices © Copyright 2013 Hewlett-Packard Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: August 2013 Document Part Number: 744153-B21 About This Guide The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. WARNING!Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION:Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE:Text set off in this manner provides important supplemental information. iii iv About This Guide Table of contents 1 Regulatory notices .......................................................................................................................................... 1 Federal Communications Commission notice ...................................................................................... 1 Modifications ........................................................................................................................ 1 Cables .................................................................................................................................. 1 Declaration of Conformity for products marked with the FCC logo (United States only) ..... 2 Products with wireless LAN devices or HP Mobile Broadband Modules ............................. 2 Brazil notice .......................................................................................................................................... 2 Canada notices .................................................................................................................................... 3 Avis Canadien ...................................................................................................................................... 3 Radiation Exposure Statement: ............................................................................................................ 3 Déclaration d'exposition aux radiations: ............................................................................................... 3 European Union regulatory notices ...................................................................................................... 3 Declaration of Conformity .................................................................................................... 3 Декларация за съответствие ............................................................................ 4 Prohlášení o shodě ............................................................................................. 4 Overensstemmelseserklæring ............................................................................ 4 Konformitätserklärung ......................................................................................... 5 Vastavusavaldus ................................................................................................. 5 Declaración de conformidad ............................................................................... 5 ∆ήλωση συμμόρφωσης ....................................................................................... 5 Déclaration de conformité ................................................................................... 6 Izjava o usklađenosti ........................................................................................... 6 Dichiarazione di conformità ................................................................................. 6 Atbilstības deklarācija ......................................................................................... 7 Atitikties deklaracija ............................................................................................. 7 Megfelelőségi nyilatkozat .................................................................................... 7 Conformiteitsverklaring ....................................................................................... 8 Samsvarserklæring ............................................................................................. 8 Deklaracja zgodności .......................................................................................... 8 Declaração de Conformidade ............................................................................. 9 Declaraţie de conformitate .................................................................................. 9 Vyhlásenie o zhode ............................................................................................. 9 Izjava o skladnosti ............................................................................................. 10 Vaatimustenmukaisuusvakuutus ....................................................................... 10 Konformitetsdeklaration .................................................................................... 10 Uygunluk Beyanı ............................................................................................... 10 v Products with wireless modules (EMF) ............................................................. 11 Japan notices ..................................................................................................................................... 11 Wireless LAN,…

Text truncated - open the document above for the full version.

Quick Start BirchQS_SL.book Page 1 Monday, August 5, 2013 8:58 AM BirchQS_SL.book Page 2 Monday, August 5, 2013 8:58 AM 1 Setting up your tablet After charging the battery, and while the battery image is displayed on the screen, press and hold the power button about 5 seconds until the HP logo is displayed. Follow the on-screen instructions to select a language, a wireless network, and a Google™ account. Lock and unlock Lock—Press the power button. Unlock—Press the power button to turn on the tablet, then place your finger on the lock icon and slide your finger to the unlock position. IMPORTANT: If the battery image is not displayed on the screen, press the power button briefly to display the image, and then press and hold the power button until the HP logo is displayed. NOTE: If you do not have a Google account, you can create one now. 1 2 3 BirchQS_SL.book Page 1 Monday, August 5, 2013 8:58 AM 2 Turn off the tablet Press and hold the power button, touch Power off, and then touch OK. If your tablet becomes unresponsive, press and hold the power button for several seconds to turn off the tablet. Using the Home screen Search—Type one or more keywords to search with Google. All apps—Displays a list of all apps installed. To configure your preferences, touch , and then tap the Settings icon. Recent apps—Opens a list of apps used recently. Home—Opens the Home screen. Back—Opens the previous screen. Voice search—Speak one or more keywords to search with Google. NOTE: The appearance of the Home screen may vary. BirchQS_SL.book Page 2 Monday, August 5, 2013 8:58 AM 3 Use gestures Return to the Home screen To quickly return to the Home screen, touch . Use the on-screen keyboard Touch a text field to open the on-screen keyboard. Some apps may open the keyboard automatically. Change your tablet’s view The Auto-rotate feature allows you to change your tablet’s view. For landscape view, hold the tablet horizontally. For portrait view, hold the tablet vertically. To change the Auto-rotate setting, swipe down from the top of the screen to display notifications, and then touch the Screen rotation icon to lock or unlock the screen rotation. Download apps from the Google Play™ Store You must be connected to a wireless network and signed into Google account before you can access the Play Store to download apps. 1. On the Home screen, touch , and then touch the Play Store app. NOTE: Some apps do not rotate automatically. BirchQS_SL.book Page 3 Monday, August 5, 2013 8:58 AM 4 2. To search for an app, touch the Search icon, and then type a keyword, or touch a category. 3. Scroll down to see the available apps, and then touch an app to select it. 4. Touch Install, and the app begins to download and install. View photos To view the photos in your Gallery, touch the All apps icon, and then touch the Gallery app. Display apps, widgets, and notification Apps—Touch , and then touch the Apps tab to see a list of all apps. Widgets—Touch , and then touch the Widgets tab to see a list of all widgets. Notification—Swipe down from the top of the screen to see your notifications. Organize the Home screen To add an app or a widget to the Home screen, touch the Apps tab or the Widgets tab, and then tap and hold an app or widget until it is added to the Home screen. To remove an app or widget from the Home screen, drag it to the X at the top of the screen. BirchQS_SL.book Page 4 Monday, August 5, 2013 8:58 AM 5 More HP resources Software terms By installing, copying, downloading, or otherwise using any software product preinstalled on this computer, you agree to be bound by the terms of the HP End User License Agreement (EULA). If you do not accept these license terms, your sole remedy is to return the entire unused product (hardware and software) within 14 days for a full refund subject to the refund policy of your seller. For any further information or to request a full refund of the purchase price of the tablet, please contact your seller. Specification The tablet operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100—240 V, 50—60 Hz. Temperature—Operating: Metric, 0°C to 40°C; U.S., 32°F to 104°F Relative humidity—(noncondensing) Operating: 10% to 90% Regulatory information Regulatory markings for your country or region may be located on the back of the tablet or may be displayed electronically. If the markings for your country are not on the back of the tablet, please check the electronic labeling. To display the regulatory e-labels: 1.Touch All apps, touch Settings, and then touch About tablet. 2.Touch Regulatory Information, and then the label icons are displayed. Depending on your tablet model, the Product Notices document is located in the box or accessible from the HP doc app on the Home screen. For regulatory identification purposes, your product is assigned a Regulatory Model Identification Number. The Regulatory Model Identification Number for your product is HSTNH-K13C. This regulatory number should not be confused with the marketing name (if any, etc.) or product numbers (HP P/N, etc.). ResourceContents HP support: For U.S.support, go to http://www.hp.com/go/contactHP. For worldwide support, go to http://welcome.hp.com/country/us/en/wwcontact_us.html.  Online chat with an HP technician.  Email support.  Find telephone numbers.  Locate HP service center locations.  Access User Guide. Serial number, product number, and model number Back of tablet Google For Google support, go to http://www.google.com/mobile/android.  Access Google online help and support. Limited Warranty Depending on your tablet model, the warranty is located in the box or accessible from the HP doc app on the Home screen. You can also go to http://www.hp.com/go/orderdocuments.  Warranty information about this tablet. NOTE: The tablet can operate on DC power using an industry-standard micro-A or micro-B USB cable. The HP 5V 2A adapter included with your tablet is recommend…

Text truncated - open the document above for the full version.

KEEN HIGH HOLDING (HK) LIMITED We , KEEN HIGH HOLDING (HK) LIMITED declare that this EUT (FCC ID: ZYQ-HHK13C) doesn’t have ad Hoc Mode function on “non-US/Canada frequencies“. In addition, the frequency selection feature is disabled by firmware for devices marketed to the US/ Canada. For DTS part of this device, only channels 1-11 will be used in North America. Country code selection is disabled. Should you have any questions or comments regarding this matter, Please have my best attention. Sincerely yours, Signature: Contact Person: Alina Wu Company: KEEN HIGH HOLDING (HK) LIMITED TEL: (86)0755-8830 9222 FAX: (86)0755-8830 9268 E-mail: [email protected]

KEEN HIGH HOLDING (HK) LIMITED Statement We, the under signed, KEEN HIGH HOLDING (HK) LIMITED declared that, our product (Tablet, HSTNH-K13C) has been tested by SGS IECC Limited Located in Units 303-305, 3/F., 31 Lok Yip Road, On Lok Tsuen, Fanling, N.T., Hong Kong . Regards It is in compliance with conducted and radiated emission limits of FCC Rules Part 15B. Signature: Printed signature: Alina Wu On behalf of KEEN HIGH HOLDING (HK) LIMITED 08/21/2013

KEEN HIGH HOLDING (HK) LIMITED Authority to Act as Agent Date: __08/21/2013 ______ American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Hellen Wang in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all matters relating to all processes required in FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: ___12 months_____ By: Alina Wu (Signature 1 ) (Print name) Title: _______ Engineer _____ On behalf of: ________ KEEN HIGH HOLDING (HK) LIMITED _________________ (Company Name) 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

KEEN HIGH HOLDING (HK) LIMITED Request for Confidentiality Date: 08/21/2013 Subject: Confidentiality Request for: ____ FCC ID: ZYQ-HHK13C Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 1 Internal Photos Short Term PermanentOperation Description/Theory of Operation Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: ______(Insert Explanation as Necessary)______ _ KEEN HIGH HOLDING (HK) LIMITED _____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180 ) 2 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TCB in the event information regarding the product or the product is made available to the public. TCB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: Engineer Alina Wu (Signature/Title 3 ) (Print name)

1 Photographs - EUT Constructional Details Test model No.: HSTNH-K13C Adapter:

1 Photographs - EUT Constructional Details Test model No.: HSTNH-K13C Adapter: Antenna:

SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM130800454401 Appendix A Detailed System Validation Results System Performance Check 2450MHz Body Date/Time: 2013-9-3 10:58:28 Test Laboratory: SGS-SAR Lab System Performance Check 2450MHz Body DUT: Dipole 2450 MHz; Type: D2450V2; Serial: 733 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: MSL2450 Medium parameters used: f = 2450 MHz; σ = 1.96 mho/m; ε r = 51.7; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3088; ConvF(4.2, 4.2, 4.2); Calibrated: 2012-11-26 Sensor-Surface: 4mm (Mechanical Surface Detection) Electronics: DAE3 Sn569; Calibrated: 2012-11-27 Phantom: SAM 1; Type: SAM V4.0; Serial: TP-1283 Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 d=10mm, Pin=250mW/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 10.2 mW/g d=10mm, Pin=250mW/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 86.1 V/m; Power Drift = -0.171 dB Peak SAR (extrapolated) = 30.0 W/kg SAR(1 g) = 13.3 mW/g; SAR(10 g) = 5.9 mW/g Maximum value of SAR (measured) = 14.9 mW/g 0 dB = 14.9mW/g

SGS-CSTC Standards Technical Services Co., Ltd. No. 1 W orkshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM130800454401 Page : 1 of 34 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 COVER PAGE FCC SAR TEST REPORT Application No.: SZEM1308004544RF Applicant: KEEN HIGH HOLDING (HK) LIMITED Manufacturer: HEWLETT-PACKARD COMPANY Factory: 1. Inventec (Pudong) Corporation 2. INVENTEC HI-TECH CORPORATION 3. INVENTEC (CHONGQING) CORP. Product Name: Tablet Model No.(EUT): HSTNH-K13C FCC ID: ZYQ-HHK13C Standards: IEEE Std C95(1991) IEEE1528(2003) OET Bulletin No. 65, Supplement C (2001) Date of Receipt: 2013-09-02 Date of Test: 2013-09-03 to 2013-09-03 Date of Issue: 2013-09-06 Test Result : PASS * * In the configuration tested, the EUT detailed in this report complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM130800454401 Page: 2 of 34 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Test Summary Frequency Band Test position Test Ch. /Freq. Max average SAR1- g(W/kg) Conducted power (dBm) Tune up Limit (dBm) Scaling Factor Scaled SAR (W/kg) SAR limit (W/kg) verdict WIFI (2.4GHz) Body 11/2462 0.952 15.780 17.000 1.324 1.261 1.6 PASS Remark: The maximum Scaled SAR value of Body is 1.261W/kg. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM130800454401 Page: 3 of 34 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days on…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Ltd. No. 1 W orkshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM130800454403 Page: 1 of 77 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover page FCC REPORT Application No: SZEM1308004544RF Applicant: KEEN HIGH HOLDING (HK) LIMITED Manufacturer: HEWLETT-PACKARD COMPANY Factory: 1. Inventec (Pudong) Corporation 2. INVENTEC HI-TECH CORPORATION 3. INVENTEC (CHONGQING) CORP. Product Name: Tablet Model No.(EUT): HSTNH-K13C FCC ID: ZYQ-HHK13C Standards: 47 CFR Part 15, Subpart C (2012) Date of Receipt: 2013-08-16 Date of Test: 2013-08-16 to 2013-09-03 Date of Issue: 2013-09-16 Test Result: PASS * * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM130800454403 Page: 2 of 77 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Test Summary Test Item Test Requirement Test method Result Antenna Requirement 47 CFR Part 15, Subpart C Section 15.203/15.247 (c) ANSI C63.10 (2009) PASS AC Power Line Conducted Emission 47 CFR Part 15, Subpart C Section 15.207 ANSI C63.10 (2009) PASS Conducted Peak Output Power 47 CFR Part 15, Subpart C Section 15.247 (b)(1) ANSI C63.10 (2009) PASS 20dB Occupied Bandwidth 47 CFR Part 15, Subpart C Section 15.247 (a)(1) ANSI C63.10 (2009) PASS Carrier Frequencies Separation 47 CFR Part 15, Subpart C Section 15.247 (a)(1) ANSI C63.10 (2009) PASS Hopping Channel Number 47 CFR Part 15, Subpart C Section 15.247 (b) ANSI C63.10 (2009) PASS Dwell Time 47 CFR Part 15, Subpart C Section 15.247 (a)(1) ANSI C63.10 (2009) PASS Pseudorandom Frequency Hopping Sequence 47 CFR Part 15, Subpart C Section 15.247(b)(4)&TCB Exclusion List (7 July 2002) ANSI C63.10 (2009) PASS Band-edge for RF Conducted Emissions 47 CFR Part 15, Subpart C Section 15.247(d) ANSI C63.10 (2009) PASS RF Conducted Spurious Emissions 47 CFR Part 15, Subpart C Section 15.247(d) ANSI C63.10 (2009) PASS Radiated Spurious emissions 47 CFR Part 15, Subpart C Section 15.205/15.209 ANSI C63.10 (2009) PASS Band Edge (Radiated Emission) 47 CFR Part 15, Subpart C Section 15.205/15.209 ANSI C63.10 (2009) PASS SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM130800454403 Page: 3 of 77 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic for…

Text truncated - open the document above for the full version.