2A2PW179641Indoor Access Point

Rev 1/26/2023 FS.COM Inc. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 01-15- 2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2A2PW179641 FS.COM Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Tao Zhang Rev 1/26/2023 FS.COM Inc. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 01- 13- 2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2A2PW179641 FS.COM Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List( as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Tao Zhang

Rev 1/26/2023 FS.COM Inc. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 01-15-2024 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID or Grantee Code: 2A2PW179641 FS.COM Inc. (“the applicant”) certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information: FRN: 0028912681 Name: FS.COM Inc. Address: 380 Centerpoint Blvd, New Castle, Delaware, United States 19720 Contact Person: Tao Zhang Tel.: 206-775- 1516 Email: [email protected] Sincerely, FS.COM Inc. Tao Zhang

FS.COM Inc. Declaration of Authorization We Name: FS.COM Inc. Address: 380 Centerpoint Blvd City: New Castle State: Delaware Country: United States Declare that: Name Representative of agent: Ms. Rose Liu Agent Company name: BTL Inc . Address: No.3,Jinshagang 1st Road, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s): Product description: Indoor Access Point Type designation: AP- N515H Trademark: FCC ID : 2A2PW179641 on our behalf. Date: 2024-01- 15 City: New Castle Name: Tao Zhang Function: General.Manager.of.North.America Signature:

FS.COM Inc. Date: 01-15-2024 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2A2PW179641 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Block Diagram Schematics Operational Description SOFTWARE SECURITY INFORMATION The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Tao Zhang

FS.COM Inc. Wi-Fi Channel 12 and 13 Declaration Letter Date: 2024-01-15 We, the undersigned company Company Name: FS.COM Inc. Address: 380 Centerpoint Blvd, New Castle, Delaware, United States Declare that: Product description: Indoor Access Point Type designation: AP-N515H Brand: FCC ID: 2A2PW179641 Only channels 1~11 will be used in USA. Country code selection is disabled. If you have any questions regarding the authorization, please do not hesitate to contact us, thank you~ Sincerely, Signature: ______________________ Name: Tao Zhang Tel: 206-775-1516 Email: [email protected]

Appendix No.: EP-2304G014-1 APPENDIX-EUT PHOTOS Project No.: 2304G014 Page 1 of 20 Appendix No.: EP-2304G014-1 APPENDIX-EUT PHOTOS Project No.: 2304G014 Page 2 of 20 Appendix No.: EP-2304G014-1 APPENDIX-EUT PHOTOS Project No.: 2304G014 Page 3 of 20 Appendix No.: EP-2304G014-1 APPENDIX-EUT PHOTOS Project No.: 2304G014 Page 4 of 20

label location

Appendix No.: EP-2304G014-1 APPENDIX-EUT PHOTOS Project No.: 2304G014 Page 5 of 25 Antenna 1 Antenna 3 Antenna 2 Appendix No.: EP-2304G014-1 APPENDIX-EUT PHOTOS Project No.: 2304G014 Page 6 of 25 Appendix No.: EP-2304G014-1 APPENDIX-EUT PHOTOS Project No.: 2304G014 Page 7 of 25 Appendix No.: EP-2304G014-1 APPENDIX-EUT PHOTOS Project No.: 2304G014 Page 8 of 25 Appendix No.: EP-2304G014-1 APPENDIX-EUT PHOTOS Project No.: 2304G014 Page 9 of 25 Appendix No.: EP-2304G014-1 APPENDIX-EUT PHOTOS Project No.: 2304G014 Page 10 of 25 Appendix No.: EP-2304G014-1 APPENDIX-EUT PHOTOS Project No.: 2304G014 Page 11 of 25 Appendix No.: EP-2304G014-1 APPENDIX-EUT PHOTOS Project No.: 2304G014 Page 12 of 25 Appendix No.: EP-2304G014-1 APPENDIX-EUT PHOTOS Project No.: 2304G014 Page 13 of 25 Appendix No.: EP-2304G014-1 APPENDIX-EUT PHOTOS Project No.: 2304G014 Page 14 of 25 Appendix No.: EP-2304G014-1 APPENDIX-EUT PHOTOS Project No.: 2304G014 Page 15 of 25 Appendix No.: EP-2304G014-1 APPENDIX-EUT PHOTOS Project No.: 2304G014 Page 16 of 25 Appendix No.: EP-2304G014-1 APPENDIX-EUT PHOTOS Project No.: 2304G014 Page 17 of 25 Appendix No.: EP-2304G014-1 APPENDIX-EUT PHOTOS Project No.: 2304G014 Page 18 of 25 Appendix No.: EP-2304G014-1 APPENDIX-EUT PHOTOS Project No.: 2304G014 Page 19 of 25 Appendix No.: EP-2304G014-1 APPENDIX-EUT PHOTOS Project No.: 2304G014 Page 20 of 25 Antenna 1 Appendix No.: EP-2304G014-1 APPENDIX-EUT PHOTOS Project No.: 2304G014 Page 21 of 25 Appendix No.: EP-2304G014-1 APPENDIX-EUT PHOTOS Project No.: 2304G014 Page 22 of 25 Antenna 2

Appendix No.: EP-2304G014-1 APPENDIX-EUT PHOTOS Project No.: 2304G014 Page 23 of 25 Appendix No.: EP-2304G014-1 APPENDIX-EUT PHOTOS Project No.: 2304G014 Page 24 of 25 Antenna 3 Appendix No.: EP-2304G014-1 APPENDIX-EUT PHOTOS Project No.: 2304G014 Page 25 of 25

Report No.: BTL-FCCP-5-2304G014 Project No.: 2304G014 Page 1 of 8 Report Version: R00 FCC RF Exposure Report FCC ID: 2A2PW179641 Report No. : BTL-FCCP-5-2304G014 Equipment : Indoor Access Point Model Name : AP-N515H Brand Name : Applicant : FS.COM Inc. Address : 380 Centerpoint Blvd, New Castle, DE 19720, United States Manufacturer : FS.COM Inc. Address : 380 Centerpoint Blvd, New Castle, DE 19720, United States Standard(s) : 47 CFR § 2.1091 FCC Guidelines for Human Exposure IEEE C95.1 Date of Receipt : 2023/4/21 Date of Test : 2023/10/27 ~ 2023/11/10 Issued Date : 2024/1/15 The above equipment has been tested and found in compliance with the requirement of the above standards by BTL Inc. Prepared by : Jerry Chuang, Supervisor Approved by : Peter Chen, Manager BTL Inc. No.18, Ln. 171, Sec. 2, Jiuzong Rd., Neihu Dist., Taipei City 114, Taiwan Tel: +886-2-2657-3299 Fax: +886-2-2657-3331 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-5-2304G014 Project No.: 2304G014 Page 2 of 8 Report Version: R00 REVISION HISTORY Report No. Version Description Issued Date Note BTL-FCCP-5-2304G014 R00 Original Report. 2024/1/15 Valid Report No.: BTL-FCCP-5-2304G014 Project No.: 2304G014 Page 3 of 8 Report Version: R00 1. LIMITS According to § 1.1310 Radiofrequency radiation exposure limits. (a) Specific absorption rate (SAR) shall be used to evaluate the environmental impact of human exposure to radiofrequency (RF) radiation as specified in § 1.1307(b) of this part within the frequency range of 100 kHz to 6 GHz (inclusive). (b) The SAR limits for occupational/controlled exposure are 0.4 W/kg, as averaged over the whole body, and a peak spatial-average SAR of 8 W/kg, averaged over any 1 gram of tissue (defined as a tissue volume in the shape of a cube). Exceptions are the parts of the human body treated as extremities, such as hands, wrists, feet, ankles, and pinnae, where the peak spatial-average SAR limit for occupational/controlled exposure is 20 W/kg, averaged over any 10 grams of tissue (defined as a tissue volume in the shape of a cube). Exposure may be averaged over a time period not to exceed 6 minutes to determine compliance with occupational/controlled SAR limits. (c) The SAR limits for general population/uncontrolled exposure are 0.08 W/kg, as averaged over the whole body, and a peak spatial-average SAR of 1.6 W/kg, averaged over any 1 gram of tissue (defined as a tissue volume in the shape of a cube). Exceptions are the parts of the human body treated as extremities, such as hands, wrists, feet, ankles, and pinnae, where the peak spatial-average SAR limit is 4 W/kg, averaged over any 10 grams of tissue (defined as a tissue volume in the shape of a cube). Exposure may be averaged over a time period not to exceed 30 minutes to determine compliance with general population/uncontrolled SAR limits. (e) Limits for Maximum Permissible Exposure (MPE) to radiofrequency electromagnetic fields (Table 1). Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (i) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *(100) ≤6 3.0-30 1842/f 4.89/f *(900/f 2 ) <6 30-300 61.4 0.163 1.0 <6 300-1.500 f/300 <6 1.500-100.000 5 <6 (ii) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) <30 1.34-30 824/f 2.19/f *(180/f 2 ) <30 30-300 27.5 0.073 0.2 <30 300-1.500 f/1500 <30 1.500-100.000 1.0 <30 f = frequency in MHz. * = Plane-wave equivalent power density. Report No.: BTL-FCCP-5-2304G014 Project No.: 2304G014 Page 4 of 8 Report Version: R00 2. APPLIED EXEMPTION CRITERIA Refer to KDB 447498 D04, ticked item is applied: For RF Exposure Test Exemptions for Single Source: ☐ 1-mW Test Exemption Per § 1.1307(b)(3)(i)(A), a single RF source is exempt RF device (from the requirement to show data demonstrating compliance to RF exposure limits, as previously mentioned) if the available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption applies to all operating configurations and exposure conditions, for the frequency range 100 kHz to 100 GHz, regardless of fixed, mobile, or portable device exposure conditions. This is a standalone exemption, and it cannot be applied in conjunction with any other test exemption. ☐ SAR-Based Exemption A more comprehensive exemption, considering a variable power threshold that depends on both the separation distance and power, is provided in § 1.1307(b)(3)(i)(B). This exemption is applicable to the frequency range between 300 MHz and 6 GHz, with test separation distances between 0.5 cm and 40 cm, and for all RF sources in fixed, mobile, and portable device exposure conditions. Accordingly, a RF source is considered an RF exempt device if its available maximum time-averaged (matched conducted) power or its effective radiated power (ERP), whichever is greater, are below a specified threshold. This exemption threshold was derived based on general population 1-g SAR requirements and is detailed in Appendix C. § 1.1307(b)(3)(i)(B): Or the available maximum time-averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold P th (mW) described in the following formula. This method shall only be used at separation distances (cm) from 0.5 centimeters to 40 centimeters and at frequencies from 0.3 GHz to 6 GHz (inclusive). P th is given by: Report No.: BTL-FCCP-5-2304G014 Project No.: 2304G014 Page 5 of 8 Report Version: R00 ☒ MPE-Based Exemption An alternative to the SAR-based exemption is provided in § 1.1307(b)(3)(i)(C), for a much wider frequency range, from 300 kHz to 100 GHz, applicable for separation distances greater or equal to λ/2π, where λ is the free-space operating wavelength in meters. The MPE-based test exemption condition is in terms of ERP, defined as the product of the maximum antenna gain and the delivered maximum time-averaged power.10 For this case, a RF so…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-1-2304G014 Project No.: 2304G014 Page 1 of 69 Report Version: R00 FCC Radio Test Report FCC ID: 2A2PW179641 Report No. : BTL-FCCP-1-2304G014 Equipment : Indoor Access Point Model Name : AP-N515H Brand Name : Applicant : FS.COM Inc. Address : 380 Centerpoint Blvd, New Castle, DE 19720, United States Manufacturer : FS.COM Inc. Address : 380 Centerpoint Blvd, New Castle, DE 19720, United States Radio Function : Bluetooth Low Energy FCC Rule Part(s) : FCC CFR Title 47, Part 15, Subpart C (15.247) Measurement Procedure(s) : ANSI C63.10-2013 Date of Receipt : 2023/4/21 Date of Test : 2023/10/27 ~ 2023/11/10 Issued Date : 2024/1/15 The above equipment has been tested and found in compliance with the requirement of the above standards by BTL Inc. Prepared by : Jerry Chuang, Supervisor Approved by : Peter Chen, Manager BTL Inc. No.18, Ln. 171, Sec. 2, Jiuzong Rd., Neihu Dist., Taipei City 114, Taiwan Tel: +886-2-2657-3299 Fax: +886-2-2657-3331 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-1-2304G014 Project No.: 2304G014 Page 2 of 69 Report Version: R00 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-1-2304G014 Project No.: 2304G014 Page 3 of 69 Report Version: R00 CONTENTS 1 SUMMARY OF TEST RESULTS 6 1.1 TEST FACILITY 7 1.2 MEASUREMENT UNCERTAINTY 7 1.3 TEST ENVIRONMENT CONDITIONS 7 1.4 DUTY CYCLE 8 2 GENERAL INFORMATION 9 2.1 DESCRIPTION OF EUT 9 2.2 TEST MODES 11 2.3 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 2.4 SUPPORT UNITS 13 3 AC POWER LINE CONDUCTED EMISSIONS TEST 14 3.1 LIMIT 14 3.2 TEST PROCEDURE 14 3.3 DEVIATION FROM TEST STANDARD 14 3.4 TEST SETUP 15 3.5 TEST RESULT 15 4 RADIATED EMISSIONS TEST 16 4.1 LIMIT 16 4.2 TEST PROCEDURE 17 4.3 DEVIATION FROM TEST STANDARD 17 4.4 TEST SETUP 17 4.5 EUT OPERATING CONDITIONS 18 4.6 TEST RESULT – 9KHZ TO 30 MHZ 19 4.7 TEST RESULT – 30 MHZ TO 1 GHZ 19 4.8 TEST RESULT – ABOVE 1 GHZ 19 5 BANDWIDTH TEST 20 5.1 APPLIED PROCEDURES / LIMIT 20 5.2 TEST PROCEDURE 20 5.3 DEVIATION FROM STANDARD 20 5.4 TEST SETUP 20 5.5 EUT OPERATION CONDITIONS 20 5.6 TEST RESULTS 20 6 OUTPUT POWER TEST 21 6.1 LIMIT 21 6.2 TEST PROCEDURE 21 6.3 DEVIATION FROM STANDARD 21 6.4 TEST SETUP 21 6.5 EUT OPERATION CONDITIONS 21 6.6 TEST RESULTS 21 7 POWER SPECTRAL DENSITY TEST 22 7.1 APPLIED PROCEDURES / LIMIT 22 7.2 TEST PROCEDURE 22 7.3 DEVIATION FROM STANDARD 22 7.4 TEST SETUP 22 7.5 EUT OPERATION CONDITIONS 22 7.6 TEST RESULTS 22 8 ANTENNA CONDUCTED SPURIOUS EMISSION 23 Report No.: BTL-FCCP-1-2304G014 Project No.: 2304G014 Page 4 of 69 Report Version: R00 8.1 APPLIED PROCEDURES / LIMIT 23 8.2 TEST PROCEDURE 23 8.3 DEVIATION FROM STANDARD 23 8.4 TEST SETUP 23 8.5 EUT OPERATION CONDITIONS 23 8.6 TEST RESULTS 23 9 LIST OF MEASURING EQUIPMENTS 24 10 EUT TEST PHOTO 26 11 EUT PHOTOS 26 APPENDIX A AC POWER LINE CONDUCTED EMISSIONS 27 APPENDIX B RADIATED EMISSIONS - 9 KHZ TO 30 MHZ 32 APPENDIX C RADIATED EMISSIONS - 30 MHZ TO 1 GHZ 37 APPENDIX D RADIATED EMISSIONS - ABOVE 1 GHZ 40 APPENDIX E BANDWIDTH 59 APPENDIX F OUTPUT POWER 62 APPENDIX G POWER SPECTRAL DENSITY TEST 64 APPENDIX H ANTENNA CONDUCTED SPURIOUS EMISSION 67 Report No.: BTL-FCCP-1-2304G014 Project No.: 2304G014 Page 5 of 69 Report Version: R00 REVISION HISTORY Report No. Version Description Issued Date Note BTL-FCCP-1-2304G014 R00 Original Report. 2024/1/15 Valid Report No.: BTL-FCCP-1-2304G014 Project No.: 2304G014 Page 6 of 69 Report Version: R00 1 SUMMARY OF TEST RESULTS Test procedures according to the technical standards. Standard(s) Section Description Test Result Judgement Remark 15.207 AC Power Line Conducted Emissions APPENDIX A Pass ------ 15.205 15.209 15.247(d) Radiated Emissions APPENDIX B APPENDIX C APPENDIX D Pass ------ 15.247(a)(2) Bandwidth APPENDIX E Pass ------ 15.247(b)(3) Output Power APPENDIX F Pass ------ 15.247(e) Power Spectral Density APPENDIX G Pass ------ 15.247(d) Antenna conducted Spurious Emission APPENDIX H Pass ------ 15.203 Antenna Requirement ------ Pass ------ NOTE: (1) ”N/A” denotes test is not applicable in this Test Report. (2) The report format version is TP.1.1.1. Report No.: BTL-FCCP-1-2304G014 Project No.: 2304G014 Page 7 of 69 Report Version: R00 1.1 TEST FACILITY The test locations stated below…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-2-2304G014 Project No.: 2304G014 Page 1 of 131 Report Version: R00 FCC Radio Test Report FCC ID: 2A2PW179641 Report No. : BTL-FCCP-2-2304G014 Equipment : Indoor Access Point Model Name : AP-N515H Brand Name : Applicant : FS.COM Inc. Address : 380 Centerpoint Blvd, New Castle, DE 19720, United States Manufacturer : FS.COM Inc. Address : 380 Centerpoint Blvd, New Castle, DE 19720, United States Radio Function : WLAN 2.4 GHz FCC Rule Part(s) : FCC CFR Title 47, Part 15, Subpart C (15.247) Measurement Procedure(s) : ANSI C63.10-2013 Date of Receipt : 2023/4/21 Date of Test : 2023/10/27 ~ 2023/11/10 Issued Date : 2024/1/15 The above equipment has been tested and found in compliance with the requirement of the above standards by BTL Inc. Prepared by : Jerry Chuang, Supervisor Approved by : Peter Chen, Manager BTL Inc. No.18, Ln. 171, Sec. 2, Jiuzong Rd., Neihu Dist., Taipei City 114, Taiwan Tel: +886-2-2657-3299 Fax: +886-2-2657-3331 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-2-2304G014 Project No.: 2304G014 Page 2 of 131 Report Version: R00 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-2-2304G014 Project No.: 2304G014 Page 3 of 131 Report Version: R00 CONTENTS 1 SUMMARY OF TEST RESULTS 6 1.1 TEST FACILITY 7 1.2 MEASUREMENT UNCERTAINTY 7 1.3 TEST ENVIRONMENT CONDITIONS 7 1.4 DUTY CYCLE 8 2 GENERAL INFORMATION 10 2.1 DESCRIPTION OF EUT 10 2.2 TEST MODES 12 2.3 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 13 2.4 SUPPORT UNITS 14 3 AC POWER LINE CONDUCTED EMISSIONS TEST 15 3.1 LIMIT 15 3.2 TEST PROCEDURE 15 3.3 DEVIATION FROM TEST STANDARD 15 3.4 TEST SETUP 16 3.5 TEST RESULT 16 4 RADIATED EMISSIONS TEST 17 4.1 LIMIT 17 4.2 TEST PROCEDURE 18 4.3 DEVIATION FROM TEST STANDARD 18 4.4 TEST SETUP 18 4.5 EUT OPERATING CONDITIONS 19 4.6 TEST RESULT – 9KHZ TO 30 MHZ 20 4.7 TEST RESULT – 30 MHZ TO 1 GHZ 20 4.8 TEST RESULT – ABOVE 1 GHZ 20 5 BANDWIDTH TEST 21 5.1 LIMIT 21 5.2 TEST PROCEDURE 21 5.3 DEVIATION FROM TEST STANDARD 21 5.4 TEST SETUP 21 5.5 EUT OPERATING CONDITIONS 21 5.6 TEST RESULT 21 6 OUTPUT POWER TEST 22 6.1 LIMIT 22 6.2 TEST PROCEDURE 22 6.3 DEVIATION FROM TEST STANDARD 22 6.4 TEST SETUP 22 6.5 EUT OPERATING CONDITIONS 22 6.6 TEST RESULT 22 7 POWER SPECTRAL DENSITY 23 7.1 LIMIT 23 7.2 TEST PROCEDURE 23 7.3 DEVIATION FROM TEST STANDARD 23 7.4 TEST SETUP 23 7.5 EUT OPERATING CONDITIONS 23 7.6 TEST RESULT 23 8 ANTENNA CONDUCTED SPURIOUS EMISSIONS TEST 24 Report No.: BTL-FCCP-2-2304G014 Project No.: 2304G014 Page 4 of 131 Report Version: R00 8.1 LIMIT 24 8.2 TEST PROCEDURE 24 8.3 DEVIATION FROM TEST STANDARD 24 8.4 TEST SETUP 24 8.5 EUT OPERATING CONDITIONS 24 8.6 TEST RESULT 24 9 LIST OF MEASURING EQUIPMENTS 25 10 EUT TEST PHOTO 27 11 EUT PHOTOS 27 APPENDIX A AC POWER LINE CONDUCTED EMISSIONS 28 APPENDIX B RADIATED EMISSIONS - 9 KHZ TO 30 MHZ 33 APPENDIX C RADIATED EMISSIONS - 30 MHZ TO 1 GHZ 38 APPENDIX D RADIATED EMISSIONS - ABOVE 1 GHZ 41 APPENDIX E BANDWIDTH 92 APPENDIX F OUTPUT POWER 105 APPENDIX G POWER SPECTRAL DENSITY 112 APPENDIX H ANTENNA CONDUCTED SPURIOUS EMISSIONS 119 Report No.: BTL-FCCP-2-2304G014 Project No.: 2304G014 Page 5 of 131 Report Version: R00 REVISION HISTORY Report No. Version Description Issued Date Note BTL-FCCP-2-2304G014 R00 Original Report. 2024/1/15 Valid Report No.: BTL-FCCP-2-2304G014 Project No.: 2304G014 Page 6 of 131 Report Version: R00 1 SUMMARY OF TEST RESULTS Test procedures according to the technical standards. Standard(s) Section Description Test Result Judgement Remark 15.207 AC Power Line Conducted Emissions APPENDIX A Pass ------ 15.205 15.209 15.247(d) Radiated Emissions APPENDIX B APPENDIX C APPENDIX D Pass ------ 15.247(a) Bandwidth APPENDIX E Pass ------ 15.247(b) Output Power APPENDIX F Pass ------ 15.247(e) Power Spectral Density APPENDIX G Pass ------ 15.247(d) Antenna conducted Spurious Emission APPENDIX H Pass ------ 15.203 Antenna Requirement ------ Pass ------ NOTE: (1) ”N/A” denotes test is not applicable in this Test Report. (2) The report format version is TP.1.1.1. Report No.: BTL-FCCP-2-2304G014 Project No.: 2304G014 Page 7 of 131 Report Version: R00 1.1 TEST FACILITY The test locations stated below are under the TAF Accreditation Number 0659. The te…

Text truncated - open the document above for the full version.

RG-AP180-I Antenna Test Report Copyright,Sercomm Corporation, All Rights Reserved. Date : Sep. 6, 2022 Prepared by : Stella Sun Outline •Antenna Structure & Placement •Return Loss & Isolation •Radiation Pattern •Peak Gain & Efficiency Proprietary 2 Antenna Structure & Placement Ant 2 Ant 3 Ant 1 Z X Y Proprietary 3 Antenna No. Operating Frequency Type Material FeedingSize Ant 1BTPIFAMetalTrace 22.8(L) x 5.1(W) x 4.8(H) mm 3 Ant 2WiFi 2G/5G DipolePCBCable 35(L) x 10(W) x 0.8(T) mm 3 Ant 3WiFi 2G/5G DipolePCBCable 35(L) x 10(W) x 0.8(T) mm 3 Return Loss –Ant 1 Proprietary 4 Return Loss –Ant 2 Proprietary 5 Return Loss –Ant 3 Proprietary 6 Isolation –Ant 1 & Ant 2 Proprietary 7 Isolation –Ant 1 & Ant 3 Proprietary 8 Isolation –Ant 2 & Ant 3 Proprietary 9 3D Pattern –Ant 1 @ 2.45GHz Z X Y Y X Proprietary 10 X Z Z Y X 3D Pattern –Ant 2 @ 2.45GHz Y X Z X Y Proprietary 11 X Z Z Y X 3D Pattern –Ant 2 @ 5.5GHz Z X Y Y X Proprietary 12 X Z Z Y X 3D Pattern –Ant 3 @ 2.45GHz Z X Y Y X Proprietary 13 X Z Z Y X 3D Pattern –Ant 3 @ 5.5GHz Z X Y Y X Proprietary 14 X Z Z Y X 2D Pattern –Ant 1 @ 2.45GHz XY plane Z X Y Proprietary 15 XY plane XZ planeYZ plane 2D Pattern –Ant 2 @ 2.45GHz XY plane Z X Y Proprietary 16 XY plane XZ planeYZ plane 2D Pattern –Ant 2 @ 5.5GHz XY plane Z X Y Proprietary 17 XY plane XZ planeYZ plane 2D Pattern –Ant 3 @ 2.45GHz XY plane Z X Y Proprietary 18 XY plane XZ planeYZ plane 2D Pattern –Ant 3 @ 5.5GHz XY plane Z X Y Proprietary 19 XY plane XZ planeYZ plane Peak Gain & Efficiency Ant 1 Frequency (MHz) Peak Gain (dBi) Efficiency (%) 2400 MHz 2.553.2 2450 MHz 2.252.8 2500 MHz 2.151.9 Ant 2 Frequency (MHz) Peak Gain (dBi) Efficiency (%) Ant 3 Frequency (MHz) Peak Gain (dBi) Efficiency (%) Proprietary 20 (MHz)(dBi)(%) 2400 MHz 3.453.4 2450 MHz 3.755.3 2500 MHz 3.653.6 5150 MHz 4.165.5 5250 MHz 4.365.7 5350 MHz 4.466.3 5550 MHz 4.672.9 5850 MHz 4.373.3 (MHz)(dBi)(%) 2400 MHz 5.554.3 2450 MHz 5.557.9 2500 MHz 5.658.1 5150 MHz 4.663.2 5250 MHz 4.664.5 5350 MHz 4.765.1 5550 MHz 5.567.5 5850 MHz 4.863.3

Appendix No.: TP-2304G014-FCCP-1 APPENDIX-TEST PHOTOS Project No.: 2304G014 Page 1 of 6 AC Power Line Conducted Emissions test photos Appendix No.: TP-2304G014-FCCP-1 APPENDIX-TEST PHOTOS Project No.: 2304G014 Page 2 of 6 Radiated emissions test photos 9 KHZ to 30 MHZ Appendix No.: TP-2304G014-FCCP-1 APPENDIX-TEST PHOTOS Project No.: 2304G014 Page 3 of 6 Radiated emissions test photos 30 MHz to 1 GHz Appendix No.: TP-2304G014-FCCP-1 APPENDIX-TEST PHOTOS Project No.: 2304G014 Page 4 of 6 Radiated emissions test photos Above 1 GHz Appendix No.: TP-2304G014-FCCP-1 APPENDIX-TEST PHOTOS Project No.: 2304G014 Page 5 of 6 Radiated emissions test photos Above 18 GHz Appendix No.: TP-2304G014-FCCP-1 APPENDIX-TEST PHOTOS Project No.: 2304G014 Page 6 of 6 DFS test photos