2A2PW190981Indoor Access Point

FS.COMInc. CERTIFICATIONSCONCERNING“COVERED”EQUIPMENT Date: 2024-07-25 FederalCommunicationsCommission Authorizationand EvaluationDivision 7435 OaklandMills Road Columbia,Maryland21046 FCC ID:2A2PW190981 To WhomIt May Concern: As requiredby section2.911(d)(5)(i),[FS.COMInc.] (“the applicant”) certifiesthat the equipmentfor whichauthorizationis soughtis not “covered” equipmentprohibitedfrom receivingan equipmentauthorizationpursuantto section2.903of the FCC rules. As requiredby section2.911(d)(5)(ii),[FS.COMInc.] (“the applicant”) certifiesthat, as of the date of the filing of the application,the applicant[is not] identifiedon the CoveredList (as a specificallynamedentityor any of its subsidiariesor affiliates)as an entityproducing “covered” equipment. Thankyou for your attentionto this matter. Sincerelyyours, Signature PrintedName:Tao Zhang Company:FS.COMInc. Job Title: General.Manager.of.North.America Email:[email protected] Telephone:206-775-1516

Rev 1/26/2023 (FS.COMInc.) FederalCommunicationsCommission Authorizationand EvaluationDivision 7435OaklandMillsRoad Columbia,MD 21046 USA Date:02 -15 -2023 Ref:AttestationStatementsPart 2.911(d)(7)Filing GranteeCode:2A2PW190981 FS.COMInc. (“the applicant”) certifiesthat,as of the dateof the filingof the application,we designate ourselvesas the U.S. agentfor serviceof process. DesignatedU.S. AgentInformation: FRN:0028912681 Name:FS.COMInc. Address:380 CenterpointBlvd NewCastleDelawareUnitedStates19720 ContactPerson:Tao Zhang Tel.: 206-775-1516 Email:[email protected] Sincerely, [FS.COMInc.] [ Tao Zhang ] [Applicantsignature]

RF_160,Issue 02 FS.COMInc. Declarationof Authorization We Name:FS.COMInc. Address:380 CenterpointBlvd City:New Castle State:Delaware Country:UnitedStates19720 Declarethat: NameRepresentativeof agent:Ms. Rose Liu Agent Companyname:BTL Inc . Address:No.3 Jinshagang1st Road, Shixia,DalangTown City: Dong Guan Country: China is authorizedto apply for Certificationand signingrelateddocumentsof the followingproduct(s), including731 form (s) : Productdescription:IndoorAccessPoint Type designation:AP-N635 Trademark: FCC ID :2A2PW190981 on our behalf. Date:2024-07-15 City :New Castle Name:Tao Zhang Function:General.Manager.of.North.America Signature: Notes: (1): Requiredfor FCC application (2): For FCC it must be the GranteeCode “owner ” or the authorizedagent.

FCC, Requestfor non-disclosureDate: 02-01-2022 RF_501,Issue 10 CompanyName:FS.COMInc. Address:380 CenterpointBlvd City:New CastleDelaware Country:UnitedStates19720 To: Kiwa NetherlandsB.V.,Dept. FCC TCB Wilmersdorf50 7327 AC Apeldoorn The Netherlands Subject:Requestfor confidentialityFCC ID:2A2PW190981 Referencenumber:###### Dear FCC TCB, 1. Long-TermConfidentiality Pursuantto 47 CFR Section0.459(a)& (b), we herebyrequestsnon-disclosureand confidentialtreatment of the followingmaterialssubmittedin supportof FCC certificationapplication: Bill(s) of MaterialBlock Diagrams OperationalDescriptionSchematicDiagramsTune-upProcedure Abovematerialscontainsecrets,proprietaryand technicalinformation,which would customarilybe guardedfrom competitorsunder 47 CFR, section0.457(d)(2).Disclosureor publicationor any portionof this companyconfidentialmaterialto other partiescould causesubstantialcompetitiveharm and provide unjustifiedbenefitsfor competitors. 2. Short-TermConfidentiality(STC) Pursuantto PublicNoticeDA 04-1705of the Commission’s policy,in order to complywith the marketing regulationsin 47 CFR §2.803 and the importationrules in 47 CFR §2.1204,applicantherebyrequests Short-TermConfidentialtreatmentof the followingmaterials(See notes below): InternalPhotosUser ’s ManualTest Set-upPhotosExternalPhotos Justification: Date:202 4-07-25Nameand signatureof applicant:Tao Zhang Notes: 1) A documentor type of documentcan only have ONE type of confidentiality! 2) Short-Termconfidentialityis in principlefor 45 days from date of grant; it can be extendedmax 3 times (total time 180 days max.)! The planneddate shouldstate in the RF731applicationform. 3) FCC must be informedwhen marketingbeginsearlier. 4) Releasetakes place automaticallythus extensionmust be requestedin time. Teleficationdoes not remindyou of this! 5) Requestfor extensionor for releasemust be receivedby Kiwa NL B.V. at least 7 days beforedate of actual marketingor before expirationof the STC period

Declarationof Product We Name:FS.COMInc. Address:380 CenterpointBlvd City:New Castle State:Delaware Country:UnitedStates19720 Declarethat: FCC ID :2A2PW190981 1. Protocolattestationstatement: a. Statementformodulesonly:Contention-BasedProtocol,as demonstratedin thetest report,is permanentlyembeddedin themoduleandis nothost-dependent. b. Statementdescribingthemethodtheindooraccesspointusesto controltheassociated client/subordinatepowercontrol. 2. Statementacknowledgingdevicerestrictions: a. Low-powerindoorAccessPoint.AccessPointoperatingin the5.925-7.125GHzband shallbe suppliedpowerfroma wiredconnection,hasan integratedantenna,is notbatterypowered, anddoesnothavea weatherizedenclosure. b. Thisdevice'soperationwillnotbe allowedon oil platforms,cars,trains,boats,and aircraft,exceptthatoperationof thisdeviceis permittedin largeaircraftwhileflying above10,000feet. c. Indooraccesspointsareprohibitedforcontrolof or communicationswithunmanned aircraftsystems,includingdrones. on our behalf. Date:2024-07-25 City :New Castle Name:Tao Zhang Function:General.Manager.of.North.America Signature:

FS.COMInc. Wi-Fi Channel12 and 13 DeclarationLetter Date: 2024-07-24 We, the undersignedcompany CompanyName:FS.COMInc. Address:380 CenterpointBlvd New CastleDelawareUnitedStates19720 Declarethat: Productdescription:IndoorAccessPoint Type designation:AP-N635 Brand: FCC ID:2A2PW190981 Only channels1~11 will be used in USA. Countrycode selectionis disabled. If you have any questionsregardingthe authorization,pleasedo not hesitateto contactus, thank you~ Sincerely, Signature:________________________ Name:Tao Zhang Tel:206-775-1516 Email:[email protected]

Project No.: 2309G010 Page 1 of 22 ATTACHMENT PHOTOGRAPHS OF EUT Project No.: 2309G010 Page 2 of 22 Project No.: 2309G010 Page 3 of 22 Project No.: 2309G010 Page 4 of 22

Project No.: 2309G010 Page 5 of 22 5G WiFi Ant. 1 5G WiFi Ant. 2 2.4G WiFi Ant. 1 2.4G WiFi Ant. 2 6G WiFi Ant. 1 6G WiFi Ant. 2 6G WiFi Ant. 3 6G WiFi Ant. 4 BLE Ant. Project No.: 2309G010 Page 6 of 22 Project No.: 2309G010 Page 7 of 22 Project No.: 2309G010 Page 8 of 22 Project No.: 2309G010 Page 9 of 22 Project No.: 2309G010 Page 10 of 22 Project No.: 2309G010 Page 11 of 22 Project No.: 2309G010 Page 12 of 22 Project No.: 2309G010 Page 13 of 22 Project No.: 2309G010 Page 14 of 22 Project No.: 2309G010 Page 15 of 22 Project No.: 2309G010 Page 16 of 22 Project No.: 2309G010 Page 17 of 22 Project No.: 2309G010 Page 18 of 22 Project No.: 2309G010 Page 19 of 22 Project No.: 2309G010 Page 20 of 22 Project No.: 2309G010 Page 21 of 22 Project No.: 2309G010 Page 22 of 22

Report No.: BTL-FCCP-6-2309G010 Page 1 of 5 FCC RF EXPOSURE REPORT FCC ID: 2A2PW190981 Project No. : 2309G010 Equipment : Indoor Access Point Brand Name : Test Model : AP-N635 Series Model : N/A Applicant : FS.COM Inc. Address : 380 Centerpoint Blvd, New Castle, DE 19720, United States Manufacturer : FS.COM Inc. Address : 380 Centerpoint Blvd, New Castle, DE 19720, United States Date of Receipt : Nov. 07, 2023 Date of Test : Nov. 07, 2023 ~ Jul. 15, 2024 Issued Date : Aug. 14, 2024 Report Version : R00 Test Sample : Engineering Sample No.: SSL2023121336 for LE, SSL20240415180 for 2.4G&5G&6G. Standard(s) : FCC Guidelines for Human Exposure IEEE C95.1 & FCC Part 2.1091 FCC Title 47 Part 2.1091 & KDB 447498 D01 v06 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Nick Chen Approved by : Chay Cai Room 108, Building 2, No. 1, Yile Road, Songshan Lake Zone, Dongguan City, Guangdong 523000 China Te l : + 8 6-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-6-2309G010 Page 2 of 5 REPORT ISSUED HISTORY Report No. Version Description Issued Date Note BTL-FCCP-6-2309G010 R00 Original Report. Aug. 14, 2024 Valid Report No.: BTL-FCCP-6-2309G010 Page 3 of 5 1. MPE CALCULATION METHOD Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna 2. ANTENNA SPECIFICATION For LE: Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 N/A N/A PCB N/A 3.52 Note: The antenna gain is provided by the manufacturer. For 2.4GHz: Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 N/A N/A PCB N/A 2.96 2 N/A N/A PCB N/A 2.98 Note: 1) This EUT supports CDD, and all antenna gains are not equal, so Directional gain=10log[(10 G1/20 +10 G2/20 +...10 GN/20 ) 2 /N]dBi, that is Directional gain=10log[(10 2.96/20 +10 2.98/20 ) 2 /2]dBi =5.98. 2) The antenna gain is provided by the manufacturer. For 5GHz: Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 N/A N/A PCB N/A 4.08 2 N/A N/A PCB N/A 4.10 Note: 1) This EUT supports CDD, and all antenna gains are not equal, so Directional gain=10log[(10 G1/20 +10 G2/20 +...10 GN/20 ) 2 /N]dBi, that is Directional gain=10log[(10 4.08/20 +10 4.10/20 ) 2 /2]dBi =7.10. 2) Beamfroming Gain: 3.00 dB, that is Directional gain=3.00+4.10=7.10. 3) The antenna gain and beamforming gain are provided by the manufacturer. For 6GHz: Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 N/A N/A PCB N/A 3.50 2 N/A N/A PCB N/A 3.50 3 N/A N/A PCB N/A 3.47 4 N/A N/A PCB N/A 3.50 Note: 1) This EUT supports CDD, and all antenna gains are not equal, so Directional gain=10log[(10 G1/20 +10 G2/20 +...10 GN/20 ) 2 /N]dBi, that is Directional gain=10log[(10 3.5/20 +10 3.5/20 +10 3.47/20 +10 3.5/20 ) 2 /4]dBi =9.51. 2) The antenna gain and beamforming gain are provided by the manufacturer. Report No.: BTL-FCCP-6-2309G010 Page 4 of 5 3. TABLE FOR ANTENNA CONFIGURATION For 2.4GHz: Operating Mode TX Mode 2TX IEEE 802.11b V(Ant. 1 + Ant. 2) IEEE 802.11g V(Ant. 1 + Ant. 2) IEEE 802.11n(HT20) V(Ant. 1 + Ant. 2) IEEE 802.11n(HT40) V(Ant. 1 + Ant. 2) IEEE 802.11ax(HE20) V(Ant. 1 + Ant. 2) IEEE 802.11ax(HE40) V(Ant. 1 + Ant. 2) For 5GHz_Non Beamforming: Operating Mode TX Mode 2TX IEEE 802.11a V (Ant. 1 + Ant. 2) IEEE 802.11n(HT20) V(Ant. 1 + Ant. 2) IEEE 802.11n(HT40) V(Ant. 1 + Ant. 2) IEEE 802.11ac(VHT20) V (Ant. 1 + Ant. 2) IEEE 802.11ac(VHT40) V (Ant. 1 + Ant. 2) IEEE 802.11ac(VHT80) V (Ant. 1 + Ant. 2) IEEE 802.11ax(HE20) V (Ant. 1 + Ant. 2) IEEE 802.11ax(HE40) V (Ant. 1 + Ant. 2) IEEE 802.11ax(HE80) V (Ant. 1 + Ant. 2) IEEE 802.11ax(HE160) V (Ant. 1 + Ant. 2) For 5GHz_ Beamforming: Operating Mode TX Mode 2TX IEEE 802.11n(HT20) V(Ant. 1 + Ant. 2) IEEE 802.11n(HT40) V(Ant. 1 + Ant. 2) IEEE 802.11ac(VHT20) V (Ant. 1 + Ant. 2) IEEE 802.11ac(VHT40) V (Ant. 1 + Ant. 2) IEEE 802.11ac(VHT80) V (Ant. 1 + Ant. 2) IEEE 802.11ax(HE20) V (Ant. 1 + Ant. 2) IEEE 802.11ax(HE40) V (Ant. 1 + Ant. 2) IEEE 802.11ax(HE80) V (Ant. 1 + Ant. 2) IEEE 802.11ax(HE160) V (Ant. 1 + Ant. 2) For 6GHz_Non Beamforming: Operating Mode TX Mode 4TX IEEE 802.11ax(HE20) V (Ant. 1 + Ant. 2 + Ant. 3 + Ant. 4) IEEE 802.11ax(HE40) V (Ant. 1 + Ant. 2 + Ant. 3 + Ant. 4) IEEE 802.11ax(HE80) V (Ant. 1 + Ant. 2 + Ant. 3 + Ant. 4) IEEE 802.11ax(HE160) V (Ant. 1 + Ant. 2 + Ant. 3 + Ant. 4) For 6GHz_Beamforming: Operating Mode TX Mode 4TX IEEE 802.11ax(HE20) V (Ant. 1 + Ant. 2 + Ant. 3 + Ant. 4) IEEE 802.11ax(HE40) V (Ant. 1 + Ant. 2 + Ant. 3 + Ant. 4) IEEE 802.11ax(HE80) V (Ant. 1 + Ant. 2 + Ant. 3 + Ant. 4) IEEE 802.11ax(HE160) V (Ant. 1 + Ant. 2 + Ant. 3 + Ant. 4) Report No.: BTL-FCCP-6-2309G010 Page 5 of 5 4. CALCULATED RESULT For BT LE: Antenna gain (dBi) Antenna gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 3.52 2.2491 6.40 4.3652 0.00116 1 Complies For 2.4GHz: Directional gain (dBi) Directional gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 5.98 3.9628 27.84 608.1350 0.47968 1 Complies For 5GHz_ Non Beamforming: Directional gain (dBi) Directional gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 7.10 5.1286 28.86 769.1304 0.46458 1 Complies For 5GHz_ Beamforming: Directional gain (dBi) Directional gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 7.10 5.1286 28.59 722.7698 0.43658 1 Complies For 6GHz_ Non Beamforming: Max. e.i.r.p. (dBm) Max. e.i.r.p. (mW) Power Density (S) (mW/ cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 25.93 391.7419 0.04614 1 Complies For 6G…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-1-2309G010 Page 1 of 69 FCC Radio Test Report FCC ID: 2A2PW190981 This report concerns: Original Grant Project No. : 2309G010 Equipment : Indoor Access Point Brand Name : Test Model : AP-N635 Series Model : N/A Applicant : FS.COM Inc. Address : 380 Centerpoint Blvd, New Castle, DE 19720, United States Manufacturer : FS.COM Inc. Address : 380 Centerpoint Blvd, New Castle, DE 19720, United States Date of Receipt : Nov. 07, 2023 Date of Test : Nov. 07, 2023 ~ Jul. 09, 2024 Issued Date : Aug. 14, 2024 Report Version : R00 Test Sample : Engineering Sample No.: SSL2023110711 for radiated, SSL2023121336 for conducted. Standard(s) : FCC CFR Title 47, Part 15, Subpart C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Nick Chen Approved by : Chay Cai Room 108, Building 2, No. 1, Yile Road, Songshan Lake Zone, Dongguan City, Guangdong 523000 China Te l : + 8 6-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-1-2309G010 Page 2 of 69 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL assumes no responsibility for the data provided by the customer, any statements, inferences or generalizations drawn by the customer or others from the reports issued by BTL. The report must not be used by the client to claim product certification, approval, or endorsement by NVLA P, NIST, or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025: 2017 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-1-2309G010 Page 3 of 69 Table of Contents Page REPORT ISSUED HISTORY 6 1 . APPLICABLE STANDARDS 7 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 2.3 TEST ENVIRONMENT CONDITIONS 9 3 . GENERAL INFORMATION 10 3.1 GENERAL DESCRIPTION OF EUT 10 3.2 DESCRIPTION OF TEST MODES 11 3.3 PARAMETERS OF TEST SOFTWARE 12 3.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 13 3.5 SUPPORT UNITS 13 3.6 CUSTOMER INFORMATION DESCRIPTION 13 4 . AC POWER LINE CONDUCTED EMISSIONS 14 4.1 LIMIT 14 4.2 TEST PROCEDURE 14 4.3 DEVIATION FROM TEST STANDARD 14 4.4 TEST SETUP 15 4.5 EUT OPERATING CONDITIONS 15 4.6 TEST RESULTS 15 5 . RADIATED EMISSIONS 16 5.1 LIMIT 16 5.2 TEST PROCEDURE 17 5.3 DEVIATION FROM TEST STANDARD 18 5.4 TEST SETUP 18 5.5 EUT OPERATING CONDITIONS 20 5.6 TEST RESULT - 9 KHZ TO 30 MHZ 20 5.7 TEST RESULT - 30 MHZ TO 1000 MHZ 20 5.8 TEST RESULT - ABOVE 1000 MHZ 20 6 . BANDWIDTH 21 6.1 LIMIT 21 6.2 TEST PROCEDURE 21 Report No.: BTL-FCCP-1-2309G010 Page 4 of 69 Table of Contents Page 6.3 DEVIATION FROM STANDARD 21 6.4 TEST SETUP 21 6.5 EUT OPERATION CONDITIONS 21 6.6 TEST RESULTS 21 7 . MAXIMUM OUTPUT POWER 22 7.1 LIMIT 22 7.2 TEST PROCEDURE 22 7.3 DEVIATION FROM STANDARD 22 7.4 TEST SETUP 22 7.5 EUT OPERATION CONDITIONS 22 7.6 TEST RESULTS 22 8 . CONDUCTED SPURIOUS EMISSION 23 8.1 LIMIT 23 8.2 TEST PROCEDURE 23 8.3 DEVIATION FROM STANDARD 23 8.4 TEST SETUP 23 8.5 EUT OPERATION CONDITIONS 23 8.6 TEST RESULTS 23 9 . POWER SPECTRAL DENSITY 24 9.1 LIMIT 24 9.2 TEST PROCEDURE 24 9.3 DEVIATION FROM STANDARD 24 9.4 TEST SETUP 24 9.5 EUT OPERATION CONDITIONS 24 9.6 TEST RESULTS 24 10 . MEASUREMENT INSTRUMENTS LIST 25 11 . EUT TEST PHOTO 27 APPENDIX A - AC POWER LINE CONDUCTED EMISSIONS 33 APPENDIX B - RADIATED EMISSION - 9 KHZ TO 30 MHZ 36 APPENDIX C - RADIATED EMISSION - 30 MHZ TO 1000 MHZ 41 APPENDIX D - RADIATED EMISSION - ABOVE 1000 MHZ 44 APPENDIX E - BANDWIDTH 59 Report No.: BTL-FCCP-1-2309G010 Page 5 of 69 Table of Contents Page APPENDIX F - MAXIMUM OUTPUT POWER 62 APPENDIX G - CONDUCTED SPURIOUS EMISSION 65 APPENDIX H - POWER SPECTRAL DENSITY 68 Report No.: BTL-FCCP-1-2309G010 Page 6 of 69 REPORT ISSUED HISTORY Report No. Version Description Issued Date Note BTL-FCCP-1-2309G010 R00 Original Report. Aug. 14, 2024 Valid Report No.: BTL-FCCP-1-2309G010 Page 7 of 69 1. APPLICABLE STANDARDS According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards: ANSI C63.10-2013 The following reference test guidance is not within the scope of accreditation of NVLAP: KDB 558074 D01 15.247 Meas Guidance v05r02 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC CFR Title 47, Part 15, Subpart C Standard(s) Section Test Item Test Result Judgment Remark 15.207 AC Power Line Conducted Emissions APPENDIX A PASS ------ 15.247(d) 15.205(a) 15.209(a) Radiated Emission…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-2-2309G010 Page 1 of 120 FCC Radio Test Report FCC ID: 2A2PW190981 This report concerns: Original Grant Project No. : 2309G010 Equipment : Indoor Access Point Brand Name : Test Model : AP-N635 Series Model : N/A Applicant : FS.COM Inc. Address : 380 Centerpoint Blvd, New Castle, DE 19720, United States Manufacturer : FS.COM Inc. Address : 380 Centerpoint Blvd, New Castle, DE 19720, United States Date of Receipt : Nov. 07, 2023 Date of Test : Nov. 07, 2023 ~ Jul. 09, 2024 Issued Date : Aug. 14, 2024 Report Version : R00 Test Sample : Engineering Sample No.: SSL2023110711 & SSL20240415180 for power, SSL2023110711 for other. Standard(s) : FCC CFR Title 47, Part 15, Subpart C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Nick Chen Approved by : Chay Cai Room 108, Building 2, No. 1, Yile Road, Songshan Lake Zone, Dongguan City, Guangdong 523000 China Te l : + 8 6-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-2-2309G010 Page 2 of 120 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL assumes no responsibility for the data provided by the customer, any statements, inferences or generalizations drawn by the customer or others from the reports issued by BTL. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025: 2017 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-2-2309G010 Page 3 of 120 Table of Contents Page REPORT ISSUED HISTORY 6 1 . APPLICABLE STANDARDS 7 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 2.3 TEST ENVIRONMENT CONDITIONS 9 3 . GENERAL INFORMATION 10 3.1 GENERAL DESCRIPTION OF EUT 10 3.2 DESCRIPTION OF TEST MODES 12 3.3 PARAMETERS OF TEST SOFTWARE 13 3.4 DUTY CYCLE 14 3.5 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 16 3.6 SUPPORT UNITS 16 3.7 CUSTOMER INFORMATION DESCRIPTION 16 4 . AC POWER LINE CONDUCTED EMISSIONS 17 4.1 LIMIT 17 4.2 TEST PROCEDURE 17 4.3 DEVIATION FROM TEST STANDARD 17 4.4 TEST SETUP 18 4.5 EUT OPERATION CONDITIONS 18 4.6 TEST RESULTS 18 5 . RADIATED EMISSIONS 19 5.1 LIMIT 19 5.2 TEST PROCEDURE 20 5.3 DEVIATION FROM TEST STANDARD 21 5.4 TEST SETUP 21 5.5 EUT OPERATION CONDITIONS 23 5.6 TEST RESULTS - 9 KHZ TO 30 MHZ 23 5.7 TEST RESULTS - 30 MHZ TO 1000 MHZ 23 5.8 TEST RESULTS - ABOVE 1000 MHZ 23 6 . BANDWIDTH 24 6.1 LIMIT 24 6.2 TEST PROCEDURE 24 Report No.: BTL-FCCP-2-2309G010 Page 4 of 120 Table of Contents Page 6.3 DEVIATION FROM STANDARD 24 6.4 TEST SETUP 24 6.5 EUT OPERATION CONDITIONS 24 6.6 TEST RESULTS 24 7 . MAXIMUM OUTPUT POWER 25 7.1 LIMIT 25 7.2 TEST PROCEDURE 25 7.3 DEVIATION FROM STANDARD 25 7.4 TEST SETUP 25 7.5 EUT OPERATION CONDITIONS 25 7.6 TEST RESULTS 25 8 . CONDUCTED SPURIOUS EMISSIONS 26 8.1 LIMIT 26 8.2 TEST PROCEDURE 26 8.3 DEVIATION FROM STANDARD 26 8.4 TEST SETUP 26 8.5 EUT OPERATION CONDITIONS 26 8.6 TEST RESULTS 26 9 . POWER SPECTRAL DENSITY 27 9.1 LIMIT 27 9.2 TEST PROCEDURE 27 9.3 DEVIATION FROM STANDARD 27 9.4 TEST SETUP 27 9.5 EUT OPERATION CONDITIONS 27 9.6 TEST RESULTS 27 10 . MEASUREMENT INSTRUMENTS LIST 28 11 . EUT TEST PHOTO 31 APPENDIX A - AC POWER LINE CONDUCTED EMISSIONS 37 APPENDIX B - RADIATED EMISSION - 9 KHZ TO 30 MHZ 40 APPENDIX C - RADIATED EMISSION - 30 MHZ TO 1000 MHZ 45 APPENDIX D - RADIATED EMISSION- ABOVE 1000 MHZ 48 APPENDIX E - BANDWIDTH 87 APPENDIX F - MAXIMUM OUTPUT POWER 94 Report No.: BTL-FCCP-2-2309G010 Page 5 of 120 Table of Contents Page APPENDIX G - CONDUCTED SPURIOUS EMISSIONS 101 APPENDIX H - POWER SPECTRAL DENSITY 114 Report No.: BTL-FCCP-2-2309G010 Page 6 of 120 REPORT ISSUED HISTORY Report No. Version Description Issued Date Note BTL-FCCP-2-2309G010 R00 Original Report. Aug. 14, 2024 Valid Report No.: BTL-FCCP-2-2309G010 Page 7 of 120 1. APPLICABLE STANDARDS According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards: ANSI C63.10-2013 The following reference test guidance is not within the scope of accreditation of NVLAP: KDB 558074 D01 15.247 Meas Guidance v05r02 KDB 662911 D01 Multiple Transmitter Output v02r01 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC CFR Title 47, Part 15, Subpart C Standard(s) Section Test Item Test Result Judgment Remark 15.207 AC Power Line …

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-2-2309G010 Page 102 of 120 Test Mode TX B Mode_Ant. 1 Bandedge-CH01 Bandedge-CH11 CH01 – 10th Harmonic of the fundamental frequency CH06 – 10th Harmonic of the fundamental frequency CH11 – 10th Harmonic of the fundamental frequency Report No.: BTL-FCCP-2-2309G010 Page 103 of 120 Test Mode TX B Mode_Ant. 2 Bandedge-CH01 Bandedge-CH11 CH01 – 10th Harmonic of the fundamental frequency CH06 – 10th Harmonic of the fundamental frequency CH11 – 10th Harmonic of the fundamental frequency Report No.: BTL-FCCP-2-2309G010 Page 104 of 120 Test Mode TX G Mode_Ant. 1 Bandedge-CH01 Bandedge-CH11 CH01 – 10th Harmonic of the fundamental frequency CH06 – 10th Harmonic of the fundamental frequency CH11 – 10th Harmonic of the fundamental frequency Report No.: BTL-FCCP-2-2309G010 Page 105 of 120 Test Mode TX G Mode_Ant. 2 Bandedge-CH01 Bandedge-CH11 CH01 – 10th Harmonic of the fundamental frequency CH06 – 10th Harmonic of the fundamental frequency CH11 – 10th Harmonic of the fundamental frequency Report No.: BTL-FCCP-2-2309G010 Page 106 of 120 Test Mode TX N(HT20) Mode_Ant. 1 Bandedge-CH01 Bandedge-CH11 CH01 – 10th Harmonic of the fundamental frequency CH06 – 10th Harmonic of the fundamental frequency CH11 – 10th Harmonic of the fundamental frequency Report No.: BTL-FCCP-2-2309G010 Page 107 of 120 Test Mode TX N(HT20) Mode_Ant. 2 Bandedge-CH01 Bandedge-CH11 CH01 – 10th Harmonic of the fundamental frequency CH06 – 10th Harmonic of the fundamental frequency CH11 – 10th Harmonic of the fundamental frequency Report No.: BTL-FCCP-2-2309G010 Page 108 of 120 Test Mode TX N(HT40) Mode_Ant. 1 Bandedge-CH03 Bandedge-CH09 CH03 – 10th Harmonic of the fundamental frequency CH06 – 10th Harmonic of the fundamental frequency CH09 – 10th Harmonic of the fundamental frequency Report No.: BTL-FCCP-2-2309G010 Page 109 of 120 Test Mode TX N(HT40) Mode_Ant. 2 Bandedge-CH03 Bandedge-CH09 CH03 – 10th Harmonic of the fundamental frequency CH06 – 10th Harmonic of the fundamental frequency CH09 – 10th Harmonic of the fundamental frequency Report No.: BTL-FCCP-2-2309G010 Page 110 of 120 Test Mode TX AX(HE20) Mode_Ant. 1 Bandedge-CH01 Bandedge-CH11 CH01 – 10th Harmonic of the fundamental frequency CH06 – 10th Harmonic of the fundamental frequency CH11 – 10th Harmonic of the fundamental frequency Report No.: BTL-FCCP-2-2309G010 Page 111 of 120 Test Mode TX AX(HE20) Mode_Ant. 2 Bandedge-CH01 Bandedge-CH11 CH01 – 10th Harmonic of the fundamental frequency CH06 – 10th Harmonic of the fundamental frequency CH11 – 10th Harmonic of the fundamental frequency Report No.: BTL-FCCP-2-2309G010 Page 112 of 120 Test Mode TX AX(HE40) Mode_Ant. 1 Bandedge-CH03 Bandedge-CH09 CH03 – 10th Harmonic of the fundamental frequency CH06 – 10th Harmonic of the fundamental frequency CH09 – 10th Harmonic of the fundamental frequency Report No.: BTL-FCCP-2-2309G010 Page 113 of 120 Test Mode TX AX(HE40) Mode_Ant. 2 Bandedge-CH03 Bandedge-CH09 CH03 – 10th Harmonic of the fundamental frequency CH06 – 10th Harmonic of the fundamental frequency CH09 – 10th Harmonic of the fundamental frequency

Report No.: BTL-FCCP-2-2309G010 Page 114 of 120 APPENDIX H - POWER SPECTRAL DENSITY Report No.: BTL-FCCP-2-2309G010 Page 115 of 120 Test Mode TX B Mode_Ant. 1 Channel Frequency (MHz) Power Spectral Density (dBm/3kHz) Max. Limit (dBm/3kHz) Result 01 2412 -1.43 8.00 Complies 06 2437 -1.47 8.00 Complies 11 2462 -1.03 8.00 Complies CH01 CH06 CH11 Test Mode TX B Mode_Ant. 2 Channel Frequency (MHz) Power Spectral Density (dBm/3kHz) Max. Limit (dBm/3kHz) Result 01 2412 2.65 8.00 Complies 06 2437 1.66 8.00 Complies 11 2462 3.91 8.00 Complies CH01 CH06 CH11 Test Mode TX B Mode_Total Channel Frequency (MHz) Power Spectral Density (dBm/3kHz) Max. Limit (dBm/3kHz) Result 01 2412 4.08 8.00 Complies 06 2437 3.38 8.00 Complies 11 2462 5.12 8.00 Complies Report No.: BTL-FCCP-2-2309G010 Page 116 of 120 Test Mode TX G Mode_Ant. 1 Channel Frequency (MHz) Power Spectral Density (dBm/3kHz) Max. Limit (dBm/3kHz) Result 01 2412 -1.39 8.00 Complies 06 2437 -0.77 8.00 Complies 11 2462 -1.86 8.00 Complies CH01 CH06 CH11 Test Mode TX G Mode_Ant. 2 Channel Frequency (MHz) Power Spectral Density (dBm/3kHz) Max. Limit (dBm/3kHz) Result 01 2412 -1.48 8.00 Complies 06 2437 -1.73 8.00 Complies 11 2462 -1.39 8.00 Complies CH01 CH06 CH11 Test Mode TX G Mode_Total Channel Frequency (MHz) Power Spectral Density (dBm/3kHz) Max. Limit (dBm/3kHz) Result 01 2412 1.58 8.00 Complies 06 2437 1.79 8.00 Complies 11 2462 1.39 8.00 Complies Report No.: BTL-FCCP-2-2309G010 Page 117 of 120 Test Mode TX N(HT20) Mode_Ant. 1 Channel Frequency (MHz) Power Spectral Density (dBm/3kHz) Max. Limit (dBm/3kHz) Result 01 2412 -1.27 8.00 Complies 06 2437 -0.62 8.00 Complies 11 2462 -1.95 8.00 Complies CH01 CH06 CH11 Test Mode TX N(HT20) Mode_Ant. 2 Channel Frequency (MHz) Power Spectral Density (dBm/3kHz) Max. Limit (dBm/3kHz) Result 01 2412 -1.13 8.00 Complies 06 2437 -1.26 8.00 Complies 11 2462 0.13 8.00 Complies CH01 CH06 CH11 Test Mode TX N(HT20) Mode_Total Channel Frequency (MHz) Power Spectral Densi…

Text truncated - open the document above for the full version.