2A64B-DEX62Floor Cleaning Robot

平面印刷品基本技术要求 科沃斯机器人股份有限公司 物料名称开普勒 PLUS- 美国 - 水箱版 - 电子档说明书 -MP尺 寸145*210mm 型 号ZJ2515印刷颜色单色 K 物料编码451-2515-1804装订方式胶装 版 次A1阶 段A 材 质封面 157 哑粉纸 + 内页 80g 双胶纸页 数97p 变更记录： 设计审核批准 ECOVACS ：机密图档 PLD 2025.11.27 舒韫 Instruction Manual Instruction Manual ���������������������������������������������������������������������������������������������EN I P03 Manuel d’instructions ����������������������������������������������������������������������������������FR-CA I P33 Manual de instrucciones �����������������������������������������������������������������������������ES-LA I P65 3EN IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS When using an electrical Appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE SAVE THESE INSTRUCTIONS 1� Do not allow to be used as a toy� Close attention is necessary when used by or near children� 2� Clear the area to be cleaned� Remove power cords and small objects from the oor that could entangle the Appliance� Tuck rug fringe under the rug base, and lift items such as curtains and tablecloths off the oor� 3� If there is a drop off in the cleaning area due to a step or stairs, you should operate the Appliance to ensure that it can detect the step without falling over the edge� It may become necessary to place a physical barrier at the edge to keep the unit from falling� Make sure the physical barrier is not a trip hazard� 4� Only use as described in this manual� Only use attachments recommended or sold by the manufacturer� 5� Do not handle plug or appliance with wet hands� 6� Non-rechargeable batteries are prohibited� 7� Do not use without Dust Bin and/or Filters in place� 8� Do not operate the vacuum in an area where there are lit candles or fragile objects on the oor to be cleaned� 9� Do not use and store in extremely hot or cold environments (below -5 ̊C /23 ̊F or above 40 ̊C/104 ̊F)� Please charge the robot in temperature above 0°C/32°F and below 40°C/104°F� 10� Keep hair, loose clothing, ngers, and all parts of body away from any openings and moving parts� 11� Do not operate the Appliance in a room where an infant or child is sleeping� 12� For INDOOR use ONLY� Do not use the Appliance in outdoor, commercial or industrial environments� Do not use Appliance on wet surfaces or surfaces with standing water� 13� Do not allow the Appliance to pick up large objects like stones, large pieces of paper, or any item that may clog the Appliance� 14� Do not use to pick up ammable or combustible materials such as gasoline, printer, or copier 4EN toner, or use in areas where they may be present� 15� Do not pick up anything that is burning or smoking, such as cigarettes, matches, hot ashes, or anything that could cause a re� 16� Do not put any object into openings� Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air ow� 17� Take care not to damage the power cord� Do not pull on or carry the Appliance or Docking Station by the power cord, use the power cord as a handle, close a door on the power cord, or pull power cord around sharp edges or corners� Do not run Appliance and Docking Station over the power cord� Keep power cord away from hot surfaces� Do not unplug by pulling on cord� To unplug, grasp the plug, not the cord� 18� If the power cord is damaged, it must be replaced by the manufacturer or its service agent in order to avoid a hazard� 19� Do not use with a damaged power cord or plug� Do not use the Appliance or Docking Station if it is not working properly, has been dropped, damaged, left outdoors, or come in contact with water� It must be repaired by the manufacturer or its service agent in order to avoid a hazard� 20� Turn OFF the power switch before cleaning or maintaining the Appliance� Turn off all controls before unplugging� Always turn off this appliance before connecting or disconnecting motorized nozzle� 21� Turn OFF the Power Switch before removing the Dust Bin� 22� Remove the Appliance from the Docking Station, and turn OFF the power switch to the Appliance before removing the battery for disposal of the Appliance� 23� The battery must be removed and discarded according to local laws and regulations before disposal of the Appliance� 24� Please dispose of used batteries according to local laws and regulations� 25� Do not incinerate the Appliance even if it is severely damaged� The batteries can explode in a re� 26� When not using the Docking Station, unplug from outlet when not in use and before servicing� 27� The Appliance must be used in accordance with the directions in this Instruction Manual�Ecovacs Home Service Robotics cannot be held liable or responsible for any damages or injuries caused by improper use� 28� Prevent unintentional starting� Ensure the switch 5EN is in the off position before connecting to battery pack, picking up or carrying the appliance� 29� When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects, that can make a connection from one terminal to another� Shorting the battery terminals together may cause burns or a re� 30� Under abusive conditions, liquid may be ejected from the battery; avoid contact� If contact accidentally occurs, ush with water� If liquid contacts eyes, additionally seek medical help� Liquid ejected from the battery may cause irritation or burns� 31� Do not use a battery pack or appliance that is damaged or modied� Damaged or modied batteries may exhibit unpredictable behavior resulting in re, explosion, or risk of injury� 32� Do not expose a battery pack or appliance to re or excessive temperature� Exposure to re or temperature above 130°C may cause explosion� The temperature of 130°C can be replaced by the temperature of 265°F� 33� Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specied in the instructions� Cha…

Text truncated - open the document above for the full version.

Ecovacs Home Service Robotics Co., Ltd. No.518 Songwei Road,Wusongjiang industry Park, Guoxiang Street, Wuzhong District, Suzhou, Jiangsu, China. 092723-17 rev 10 Certification Application Attestation Statements Date: December 29, 2025 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) Ecovacs Home Service Robotics Co., Ltd. certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) Ecovacs Home Service Robotics Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of this application, the applicant ☐ - is / - is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates – see KDB 986446 Question 5) as an entity producing “covered” equipment. The applicant also certifies that the device does not have cybersecurity and/or anti-virus software produced by Kaspersky Lab, Inc or any of its successors and assignees identified on the covered list installed on the device, nor will it be installed by the applicant ay time after certification. Thank you, By: Alix Liu (Signature 2 ) (Print name) Title: Compliance Manager Company: Ecovacs Home Service Robotics Co., Ltd. Telephone: 0512-67072006 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . 2 - Letters should be placed on appropriate letterhead.

U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Ecovacs Robotics, Inc. FRN: 0033541814 Contact Name: Thomas Climer Street Address: 1500 Fashion Island Blvd., Suite 201 City/Province/Zip: San Mateo, CA 94404 Telephone No: 650.437.2872 Email: [email protected] Signed by (Printed Name/Title): Thomas Climer, GTM Director The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission- related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Ecovacs Home Service Robotics Co., Ltd. Grantee Code: 2A64B FRN #: 0032456899 Contact Name: Alix Liu Street Address: No.518 Songwei Road, Wusongjiang industry Park,Guoxiang Street, Wuzhong District City/Province/Zip: Suzhou, Jiangsu,China Telephone No: 0512-67072006 Email: [email protected] Applicant Signature 1 : Signed by (Printed Name/Title): Alix Liu/ Comoliance manager 1 - Letters must be placed on appropriate letterhead. The signee for the applicant must be one of the following: Applicant (grantee) contact of record in the FCC’s authorization system, or authorized officers or employee of the applicant (grantee). Date:29/12/2025 Date: 29/12/2025

Ecovacs Home Service Robotics Co., Ltd. No.518 Songwei Road, Wusongjiang industry Park, Guoxiang Street, Wuzhong District, Suzhou, Jiangsu, China. Declaration Letter We Ecovacs Home Service Robotics Co., Ltd. hereby declare that the product Floor Cleaning Robot / DEX62 is not capable of operating with channel 12 and 13 in regions of US and Canada. Versions of the product available for import and sale in the US and Canada will not operate on channels 12 and 13. It will not be possible for users and configure these channels in the US and Canada version. By: ______________________ Alix Liu (Signature 1 ) (Print name) Title: Compliance Manager________ On behalf of: Ecovacs Home Service Robotics Co., Ltd.________ (Company Name) Telephone: _____0512-67072006_____________ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Ecovacs Home Service Robotics Co., Ltd. No.518 Songwei Road,Wusongjiang industry Park,Guoxiang Street, Wuzhong District,Suzhou, Jiangsu,China. 041521-14 Authority to Act as Agent Date: December 29, 2025 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: __Intertek Testing Services (Shanghai FTZ) Co., Ltd _ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: _____2026.12.29____ By: __________________________ _______Alix Liu________ (Signature 1 ) (Print name) Title: ____Compliance Manager_____ On behalf of: __ Ecovacs Home Service Robotics Co., Ltd.__ (Company Name) Telephone: ____0512-67072006 __________ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Ecovacs Home Service Robotics Co., Ltd. No.518 Songwei Road,Wusongjiang industry Park, Guoxiang Street, Wuzhong District, Suzhou, Jiangsu, China. 041521-14 Request for Confidentiality Date: December 29, 2025 Subject: Confidentiality Request for: ______FCC ID: 2A64B-DEX62____ Pursuant to FCC 47 CFR 0.457(d) and 0.459, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit ☐ Short Term ☒ Permanent Block Diagrams ☐ Short Term External Photos ☐ Short Term ☐ Permanent * 1 Internal Photos ☐ Short Term ☒ Permanent Operation Description/Theory of Operation ☐ Short Term ☒ Permanent Schematics ☐ Short Term Test Setup Photos ☐ Short Term ☐ Permanent * 3 User’s Manual __ Ecovacs Home Service Robotics Co., Ltd.____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180) 2 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By: __________________________ ________Alix Liu_____________ (Signature/Title 3 ) (Print name) 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Please refer to https://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

FCC ID: 2A64B-DEX62 IC: 28593-DEX62 External Photos FCC ID: 2A64B-DEX62 IC: 28593-DEX62 FCC ID: 2A64B-DEX62 IC: 28593-DEX62

location illustration 110mm 34mm R=3mm 注意：磨砂雾面膜 DEEBOT T80S OMNI Floor Cleaning Robot/Robot-nettoyeur de plancher/Robot limpia pisos Model/Modèle/Modelo: DEX62 Rated Input/Entrée nominale/Entrada clasicada: 20V 2A Docking Station/Station d' accueil/Estación de carga: CH2497F. For use only with Ecovacs Home Service Robotics Co., Ltd. CH2497F charger./ À utiliser uniquement avec le chargeur Ecovacs Home Service Robotics Co., Ltd. CH2497F./ Solo para uso con los cargadores CH2497F de Ecovacs Home Service Robotics Co., Ltd. This Device Complies with DHHS Radiation Rules, 21 CFR Chapter 1,Subchapter J./ Cet appareil est conforme aux règles de radiation du DHHS,21 CFR chapitre 1, sous-chapitre J.This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B) FCC ID: 2A64B-DEX62 IC: 28593-DEX62 MADE IN CHINA/FAIT EN CHINE/HECHO EN CHINA 5025506 Conforms to UL Std.1017 Certied to CSA Std. C22.2 NO.243 The position where the nameplate is pasted

FCC ID: 2A64B-DEX62 IC: 28593-DEX62 Internal Photos FCC ID: 2A64B-DEX62 IC: 28593-DEX62 FCC ID: 2A64B-DEX62 IC: 28593-DEX62 FCC ID: 2A64B-DEX62 IC: 28593-DEX62 FCC ID: 2A64B-DEX62 IC: 28593-DEX62 FCC ID: 2A64B-DEX62 IC: 28593-DEX62 FCC ID: 2A64B-DEX62 IC: 28593-DEX62 FCC ID: 2A64B-DEX62 IC: 28593-DEX62 FCC ID: 2A64B-DEX62 IC: 28593-DEX62 FCC ID: 2A64B-DEX62 IC: 28593-DEX62 Antenna Location FCC ID: 2A64B-DEX62 IC: 28593-DEX62

Ecovacs Home Service Robotics Co., Ltd. MPE ASSESSMENT REPORT Report Type: FCC Part §2.1091 and §1.1307(b) assessment report Model: DEX62 REPORT NUMBER: 2511B0890SHA-003 ISSUE DATE: December 29, 2025 DOCUMENT CONTROL NUMBER: TTRFFCCMPE-01_V1 © 2018 Intertek Intertek Testing Services (Shanghai FTZ) Co., Ltd. Building No.86, 1198 Qinzhou Road (North) Caohejing Development Zone Shanghai 200233, China Telephone: 86 21 6127 8200 www.intertek.com TEST REPORT This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. TTRFFCCMPE-01_V1© 2018 Intertek Page 2 of 8 Report no.: 2511B0890SHA-003 Applicant: Ecovacs Home Service Robotics Co., Ltd. No.518 Songwei Road,Wusongjiang industry Park, Guoxiang Street, Wuzhong District, Suzhou, Jiangsu, China. Manufacturer: Ecovacs Home Service Robotics Co., Ltd. No.518 Songwei Road,Wusongjiang industry Park, Guoxiang Street, Wuzhong District, Suzhou, Jiangsu, China. Factory 1: Ecovacs Robotics Co., Ltd. No.518 Songwei Road, Wusongjiang industry Park, Guoxiang Street, Wuzhong District, Suzhou, Jiangsu, China Factory 2: Ecovacs Home Service Robotics Co., Ltd. No.518 Songwei Road, Wusongjiang industry Park, Guoxiang Street, Wuzhong District, Suzhou, Jiangsu, China. FCC ID: 2A64B-DEX62 SUMMARY: The equipment complies with the requirements according to the following standard(s) or Specification: KDB447498 D01 General RF Exposure Guidance v06 FCC Part2.1091, FCC Part1.1307(b) PREPARED BY: REVIEWED BY: Project Engineer Eric Li Reviewer Wakeyou Wang Report No.: 2511B0890SHA-003 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 3 of 8 Revision History Report No. Version Description Issued Date 2511B0890SHA-003 Rev. 01 Initial issue of report December 29, 2025 Report No.: 2511B0890SHA-003 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 4 of 8 1 GENERAL INFORMATION 1.1 Description of Equipment Under Test (EUT) Product name: Floor Cleaning Robot Type/Model: DEX62 Description of EUT: The EUT is a Floor Cleaning Robot, it supports Bluetooth and WIFI functions. There is one model, we tested it and listed the worst results in this report. Rating: DC20V, 2.0A Brand Name: , , , EUT type: Table top Floor standing Software Version: / Hardware Version: / Sample Identification No.: A251125-002-001 Sample received date: 2025.11.25 Date of test: 2025.11.27~2025.12.13 1.2 Technical Specification Frequency Band: 2402MHz to 2480MHz Support Standards: Bluetooth Low Energy Type of Modulation: GFSK Channel Number: 40 Data Rate 1Mbps Channel Separation: 2MHz Antenna Information: FPC Antenna, gain is 3.39dBi Frequency Band: 2400MHz ~ 2483.5MHz Support Standards: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n-HT20, IEEE 802.11n-HT40 Type of Modulation: IEEE 802.11b: DSSS (CCK, DQPSK, DBPSK) IEEE 802.11g: OFDM (64-QAM, 16-QAM, QPSK, BPSK) IEEE 802.11n-HT20: OFDM (64-QAM, 16-QAM, QPSK, BPSK) IEEE 802.11n-HT40: OFDM (64-QAM, 16-QAM, QPSK, BPSK) Channel Number: 11 Channels for 802.11b, 802.11g, 802.11n(HT20) 7 Channels for 802.11n(HT40) Channel Separation: 5 MHz Antenna: FPC Antenna, gain is 3.39dBi Report No.: 2511B0890SHA-003 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 5 of 8 1.3 Description of Test Facility Name: Intertek Testing Services (Shanghai FTZ) Co., Ltd. Address: Building 86, No. 1198 Qinzhou Road(North), Shanghai 200233, P.R. China Telephone: 86 21 61278200 Telefax: 86 21 54262353 The test facility is recognized, certified, or accredited by these organizations: CNAS Accreditation Lab Registration No. CNAS L21189 FCC Accredited Lab Designation Number: CN0175 IC Registration Lab CAB identifier.: CN0014 VCCI Registration Lab Member No: 3598 (Registration No.: R-14243, G-10845, C-14723, T-12252) A2LA Accreditation Lab Certificate Number: 3309.02 Report No.: 2511B0890SHA-003 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 6 of 8 2 MPE Assessment Test result: Pass 2.1 MPE Assessment Limit Mobile device exposure for standalone operations: Frequency range E-field strength (V/m) H-field strength (A/m) B-field (uT) Equivalent plane wave power density S eq (W/m 2 ) 0-1 Hz - 3,2 × 10 4 4 × 10 4 - 1-8 Hz 10 000 3,2 × 10 4 /f 2 4 × 10 4 /f 2 - 8-25 Hz 10 000 4 000/f 5 000/f - 0,025-0,8 kHz 250/f 4/f 5/f - 0,8-3 kHz 250/f 5 6,25 - 3-150 kHz 87 5 6,25 - 0,15-1 MHz 87 0,73/f 0,92/f - 1-10 MHz 87/f 1/2 0,73/f 0,92/f - 10-400 MHz 28 0,073 0,092 2 400-2 000 MHz 1,375 f 1/2 0,0037 f 1/2 0,0046 f 1/2 f/200 2-300 GHz 61 0,16 0,20 10 Mobile device exposure for simultaneous transmission operations: the sum of the MPE ratios for all simultaneously transmitting antennas incorporated in a host device is ≤ 1.0 Report No.: 2511B0890SHA-003 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 7 of 8 2.2 Assessment Results Power density (S) is calculated according to the formula: S = PG / (4πR²) Where S = power density in mW/cm² P = Radiated transmit power in mW G = numeric gain of transmit antenna R = distance (cm) As we can see from the test report 2511B0890SHA-001 and 2511B0890SHA-002: The calculations in the table below use the highest gain of antenna for client EUT. These calculations represent worst case in terms of the exposure levels. Mode Frequency band Max Power Antenna Gain R…

Text truncated - open the document above for the full version.

Customer Project Name Customer NO. specification FPC antenna 4A8-1100-2300 matte black oil with white characters; Size: 32X10MM; The wire is 175MM in length, 1.13mm in diameter, and black. With first-generation IPEX; ROHS Supplier NO. Specification NO. Write by REV. Ver.1 Date 202 4-7- 10 Note antenna testing FN-LINK TECHNOLOGY LIMITED 1.试验设备和条件(Test Equipment & Conditions) 1.1 Network Analyzers : KEYSIGHT P5002A 1.2 Communications Test Set: R&S CMW 500 1.3 3D Chamber Test System: 24-probe test system 1. Test schematic diagram of the microwave anechoic chamber 2.explain。 FN-LINK TECHNOLOGY LIMITED 2D antenna diagram FN-LINK TECHNOLOGY LIMITED 2D antenna diagram FN-LINK TECHNOLOGY LIMITED WiFi- Antenna S11 Freq/GHz240024502500510055005850 VSWR1.31.01.22.51.81.7 FN-LINK TECHNOLOGY LIMITED WiFi Antenna - Test data: FN-LINK TECHNOLOGY LIMITED WiFi Antenna -2.4G direction diagram Apple image: FN-LINK TECHNOLOGY LIMITED FN-LINK TECHNOLOGY LIMITED

FCC ID: 2A64B-DEX62 IC: 28593-DEX62 Appendix A of 2511B0890SHA-001 test results of BLE DTS Bandwidth Test Result TestMode Antenna Frequency [MHz] DTS BW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict BLE_1M Ant1 2402 0.712 2401.648 2402.360 0.5 PASS BLE_1M Ant1 2440 0.700 2439.652 2440.352 0.5 PASS BLE_1M Ant1 2480 0.704 2479.636 2480.340 0.5 PASS FCC ID: 2A64B-DEX62 IC: 28593-DEX62 Test Graphs BLE_1M-Ant1-2402-PASS BLE_1M-Ant1-2440-PASS BLE_1M-Ant1-2480-PASS FCC ID: 2A64B-DEX62 IC: 28593-DEX62 Occupied Channel Bandwidth Test Result TestMode Antenna Frequency [MHz] OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict BLE_1M Ant1 2402 1.0478 2401.4800 2402.5278 --- --- BLE_1M Ant1 2440 1.0440 2439.4807 2440.5247 --- --- BLE_1M Ant1 2480 1.0410 2479.4876 2480.5286 --- --- FCC ID: 2A64B-DEX62 IC: 28593-DEX62 Test Graphs BLE_1M-Ant1-2402 BLE_1M-Ant1-2440 BLE_1M-Ant1-2480 FCC ID: 2A64B-DEX62 IC: 28593-DEX62 Maximum conducted output power Test Result Peak TestMode Antenna Frequency [MHz] Conducted Peak Powert[dBm] Conducted Limit[dBm] EIRP[dBm] EIRP Limit[dBm] Verdict BLE_1M Ant1 2402 3.58 ≤30 6.97 ≤36 PASS BLE_1M Ant1 2440 3.71 ≤30 7.10 ≤36 PASS BLE_1M Ant1 2480 4.25 ≤30 7.64 ≤36 PASS FCC ID: 2A64B-DEX62 IC: 28593-DEX62 Test Graphs Peak BLE_1M-Ant1-2402-PASS BLE_1M-Ant1-2440-PASS BLE_1M-Ant1-2480-PASS FCC ID: 2A64B-DEX62 IC: 28593-DEX62 Maximum power spectral density Test Result TestMode Antenna Frequency [MHz] Result[dBm/3kHz] Limit[dBm/3kHz] Verdict BLE_1M Ant1 2402 -11.47 ≤8.00 PASS BLE_1M Ant1 2440 -11.41 ≤8.00 PASS BLE_1M Ant1 2480 -11.56 ≤8.00 PASS FCC ID: 2A64B-DEX62 IC: 28593-DEX62 Test Graphs BLE_1M-Ant1-2402-PASS BLE_1M-Ant1-2440-PASS BLE_1M-Ant1-2480-PASS FCC ID: 2A64B-DEX62 IC: 28593-DEX62 Band edge measurements Test Result TestMode Antenna ChName Frequency [MHz] RefLevel[dBm] Result[dBm] Limit[dBm] Verdict BLE_1M Ant1 Low 2402 2.34 -49.61 ≤-17.66 PASS BLE_1M Ant1 High 2480 3.44 -49.46 ≤-16.56 PASS FCC ID: 2A64B-DEX62 IC: 28593-DEX62 Test Graphs BLE_1M-Ant1-2402-PASS BLE_1M-Ant1-2480-PASS FCC ID: 2A64B-DEX62 IC: 28593-DEX62 Conducted Spurious Emission Test Result TestMode Antenna Frequency [MHz] FreqRange [MHz] RefLevel [dBm] Result[dBm] Limit[dBm] Verdict BLE_1M Ant1 2402 0~Reference 2.78 2.78 --- PASS BLE_1M Ant1 2402 30~1000 2.78 -59.98 ≤-17.22 PASS BLE_1M Ant1 2402 1000~26500 2.78 -49.21 ≤-17.22 PASS BLE_1M Ant1 2440 0~Reference 2.81 2.81 --- PASS BLE_1M Ant1 2440 30~1000 2.81 -61.49 ≤-17.19 PASS BLE_1M Ant1 2440 1000~26500 2.81 -48.94 ≤-17.19 PASS BLE_1M Ant1 2480 0~Reference 3.44 3.44 --- PASS BLE_1M Ant1 2480 30~1000 3.44 -61.59 ≤-16.56 PASS BLE_1M Ant1 2480 1000~26500 3.44 -48.65 ≤-16.56 PASS FCC ID: 2A64B-DEX62 IC: 28593-DEX62 Test Graphs BLE_1M-Ant1-2402-0~Reference-PASS BLE_1M-Ant1-2402-30~1000-PASS BLE_1M-Ant1-2402-1000~26500-PASS FCC ID: 2A64B-DEX62 IC: 28593-DEX62 BLE_1M-Ant1-2440-0~Reference-PASS BLE_1M-Ant1-2440-30~1000-PASS BLE_1M-Ant1-2440-1000~26500-PASS BLE_1M-Ant1-2480-0~Reference-PASS FCC ID: 2A64B-DEX62 IC: 28593-DEX62 BLE_1M-Ant1-2480-30~1000-PASS BLE_1M-Ant1-2480-1000~26500-PASS

FCC ID: 2A64B-DEX62 IC: 28593-DEX62 Appendix B of 2511B0890SHA-002 Test results of WIFI DTS Bandwidth Test Result TestMode Antenna Frequency[MHz] DTS BW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11B Ant1 2412 8.600 2407.920 2416.520 0.5 PASS 11B Ant1 2437 10.040 2431.960 2442.000 0.5 PASS 11B Ant1 2462 9.520 2457.000 2466.520 0.5 PASS 11G Ant1 2412 16.320 2403.840 2420.160 0.5 PASS 11G Ant1 2437 16.080 2429.080 2445.160 0.5 PASS 11G Ant1 2462 16.320 2453.840 2470.160 0.5 PASS 11N20SISO Ant1 2412 17.560 2403.200 2420.760 0.5 PASS 11N20SISO Ant1 2437 17.600 2428.200 2445.800 0.5 PASS 11N20SISO Ant1 2462 17.560 2453.200 2470.760 0.5 PASS 11N40SISO Ant1 2422 35.520 2404.400 2439.920 0.5 PASS 11N40SISO Ant1 2437 35.280 2419.480 2454.760 0.5 PASS 11N40SISO Ant1 2452 33.120 2436.400 2469.520 0.5 PASS FCC ID: 2A64B-DEX62 IC: 28593-DEX62 Test Graphs 11B-Ant1-2412-PASS 11B-Ant1-2437-PASS 11B-Ant1-2462-PASS FCC ID: 2A64B-DEX62 IC: 28593-DEX62 11G-Ant1-2412-PASS 11G-Ant1-2437-PASS 11G-Ant1-2462-PASS 11N20SISO-Ant1-2412-PASS FCC ID: 2A64B-DEX62 IC: 28593-DEX62 11N20SISO-Ant1-2437-PASS 11N20SISO-Ant1-2462-PASS 11N40SISO-Ant1-2422-PASS FCC ID: 2A64B-DEX62 IC: 28593-DEX62 11N40SISO-Ant1-2437-PASS 11N40SISO-Ant1-2452-PASS FCC ID: 2A64B-DEX62 IC: 28593-DEX62 Occupied Channel Bandwidth Test Result TestMode Antenna Channel Frequency[MHz] OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11B Ant1 2412 14.904 2404.5571 2419.4611 --- --- 11B Ant1 2437 14.897 2429.5768 2444.4738 --- --- 11B Ant1 2462 15.006 2454.4862 2469.4922 --- --- 11G Ant1 2412 17.168 2403.4222 2420.5902 --- --- 11G Ant1 2437 17.211 2428.4221 2445.6331 --- --- 11G Ant1 2462 17.107 2453.3507 2470.4577 --- --- 11N20SISO Ant1 2412 18.158 2402.9185 2421.0765 --- --- 11N20SISO Ant1 2437 18.206 2427.9250 2446.1310 --- --- 11N20SISO Ant1 2462 18.159 2452.8476 2471.0066 --- --- 11N40SISO Ant1 2422 35.932 2404.0662 2439.9982 --- --- 11N40SISO Ant1 2437 35.948 2419.0411 2454.9891 --- --- 11N40SISO Ant1 2452 35.910 2434.0687 2469.9787 --- --- FCC ID: 2A64B-DEX62 IC: 28593-DEX62 Test Graphs 11B-Ant1-2412 11B-Ant1-2437 11B-Ant1-2462 FCC ID: 2A64B-DEX62 IC: 28593-DEX62 11G-Ant1-2412 11G-Ant1-2437 11G-Ant1-2462 11N20SISO-Ant1-2412 FCC ID: 2A64B-DEX62 IC: 28593-DEX62 11N20SISO-Ant1-2437 11N20SISO-Ant1-2462 11N40SISO-Ant1-2422 FCC ID: 2A64B-DEX62 IC: 28593-DEX62 11N40SISO-Ant1-2437 11N40SISO-Ant1-2452 FCC ID: 2A64B-DEX62 IC: 28593-DEX62 Maximum conducted output power Test Result Average Test Mode Ant Freque ncy [MHz] Average power [dBm] Duty Cycle [%] DC Factor [dBm] Result [dBm] Limit [dBm] Gain [dBi] EIRP [dBm] EIRP Limit [dBm] Verdict 11B Ant1 2412 14.26 99.28 0.03 14.29 ≤30.00 3.39 17.68 ≤36.00 PASS 11B Ant1 2437 14.20 96.06 0.17 14.37 ≤30.00 3.39 17.76 ≤36.00 PASS 11B Ant1 2462 14.67 98.81 0.05 14.72 ≤30.00 3.39 18.11 ≤36.0…

Text truncated - open the document above for the full version.