2A95C-BNH1CG Navigator holder for BMW

Dimensions（尺寸）91 x 53 x 55 mm Clamp fitment（标配管夹适配管径）Ø12–Ø16 mm Materials（材料） Cradle body: PC + 10% GF; Clamp: Aluminum alloy 底座PC+10%GF;管夹铝合金 Cable length（线材长度）70 cm Operating voltage（工作电压)DC 12V Fuse rating（保险丝规格） 3A Waterproof rating（防水等级） IP69K Power connector（底座供电插头） Compatible with BMW OEM LIN-protocol power plug 适配宝马原装LIN协议电源插头 18-pin communication connector （底座 18PIN 通讯连接器） Compatible with BMW OEM infotainment data port 适配宝马原装车机数据接口 Mounting latch interface（底座安装卡扣） Compatible with BMW OEM head-unit latch structure 适配宝马原装车机安装卡口 MPack0617 Product Overview（产品概述） Package Contents（产品清单） Parts Description（部件详情） The CG BMW Electric Quick-Release Mount is specifically designed for BMW models equipped with the original LIN protocol power interface. The mount supports the BMW NAV LIN bus protocol, enabling transmission of vehicle data to compatible display units and providing Wonder Wheel control signals. It also supports the BMW LIN bus protocol, allowing original vehicle data—such as vehicle speed, engine RPM, total mileage, temperature, and lean angle—to be transmitted to compatible display units. CG 宝马电动快拆底座专为配备 BMW 原装 LIN 协议电源接口的宝马摩托车设计。底座支持BMW NAV LIN总线协议，可向兼容 车机传输原车数据，并提供 Wonder Wheel 滚轮控制信号。底座支持BMWLIN总线协议，可将原车数据传输至兼容车机 (如车 速、转速、总里程、温度、倾角等)。 Electric Quick-Release Mount ×1 电动快拆底座 ×1 Disassembly Tool Kit ×1 拆装工具包 ×1 12-16mm Crossbar Mounting Base ×1 12-16mm 横杆安装底座 ×1 ① Mounting latch hooks（底座安装卡扣） fit the BMW OEM Navigator mounting interface 适配BMW原厂车机安装卡口 当底座故障或摩托车无法通电，导致无法通过解锁按键解锁时 If the cradle fails or the bike has no power and you can't unlock using the button: 1. Use the included T6 Torx tool to remove the two screws. 使用配件包内的T6扳手，拧下盖子上的2颗螺丝。 3. With the cover open, move the override pin in the direction shown and hold it in the UNLOCK position. 打开应急解锁盖后，按箭头方向拨动拨针，并保持拨针在解锁位置。 4. While holding the pin, press the release lever to remove the display. 同时按压脱扣推杆，即可取下车机。 5. After removal, return the pin to its normal position and reinstall the cover and screws. 取下后请复位拨针，并装回复位应急解锁盖与螺丝。 T6 screws（use the included T6 tool） T6螺丝（配件包内T6扳手） Emergency release cover 应急解锁盖 Override pin（hold in UNLOCK） 拨针（保持在解锁位） Press release lever to remove 按压脱扣推杆取下车机 2. Open the emergency release cover to access the manual release mechanism inside. 打开应急解锁盖，内部为应急解锁装置。 ② Releaselever（脱扣推杆） press to release the latch and remove the display (only when unlocked) 按压以释放卡扣，用于取下车机(需在已解锁状态下) ③ 18-pin data connector （18PIN通讯连接器） plugs into the BMW OEM infotainment data port (vehicle data + Wonder Wheel signals) 适配BMW原装车机数据接口(用于数据与滚轮控制信号传输) ④ Power connector (底座供电插头) compatible with the BMW OEM LIN power plug (12V supply) 适配BMW原装LIN协议电源插头(12V供电) ⑤ Unlock button (ignition ON) (解锁按键(需上电)） Press and hold the button for 2 second to unlock. After releasing, press the release leverwithin 10 seconds to remove the display; after 10 seconds, it will automatically relock. 长按按键2秒解锁。松开后请在10秒内按下脱扣推杆即可 取下车机;超过10秒将自动重新上锁。 ① Attach the lower half of the horizontal rod clamp to the base. 将横杆管夹下半部分固定至底座上。 The cradle has a built-in electromagnetic lock-no physical key required. 底座内置电磁锁，无需实体钥匙。 Ignition OFF / unpowered: the cradle stays locked, and the display cannot be removed. 车辆熄火/断电:底座保持上锁，无法拆下车机。 Ignition ON / powered: Hold the unlock button for 2 seconds to unlock. Then press the release lever to remove the display. 车辆上电:长按解锁键两秒，即可解锁。随后按压脱扣推杆即可取下车机。 Green: fully latched (ready to ride) 绿色:已扣紧，可正常使用 Half red/half green = not fullyseated (do not ride-reinstall and confirm it clicks in) 半红半绿:未完全扣紧(请勿骑行，请重新安装并确认到位) Button LED (blue) : Lights up when theunlock button is pressed. 按键指示灯(蓝色):按下解锁按键时点亮，用于提示按键 动作已触发。 Red: unlatched/released 红色:已脱扣/未锁定 *The latch statuswindow is locatedat the upper-leftof the cradle andindicates the latchstatus. 卡扣状态指示窗位于底座左上方，用于显示锁扣状态。 ② Mount the base onto the Ø12-Ø16mm horizontal rod, securing it firmly with the four screws. 将底座安装到Ø12–Ø16mm 的横杆上，并拧紧4颗螺丝牢固固定。 ③ Plug the base's power connector into the BMW OEM LIN protocol power interface. Once powered, the system will be ready for use. 随后将底座供电插头接入BMW原厂LIN协议电源接口，为底座供电后即可正常使用。 建议由具备经验的技师安装。布线需避开高温与活动部件，避免拉扯与夹线。仅适用于DC 12V 系统，请勿接入24V。 Professionalinstallation is recommended. Route cables away from heat sources and moving parts, and avoid pinching or tension. For 12V systems only-do not connect to 24V. ⑥ Fits Ø12/Ø16 crossbar （适配 Ø12-Ø16 横杆） Includes a mounting clamp for Ø12–Ø16 crossbars. 包装内含支架，适配 Ø12–Ø16 横杆。 ⑦ 4-point silicone dampers （四点硅胶减震） Four silicone dampers help reduce vibration for a more stable mount. 四点硅胶减震用于降低震动传递，提升骑行稳定性与观感。 Anti-Theft & Quick Release（防盗与快拆机制） Latch status window （卡扣状态指示窗） Emergency release procedure （应急解锁操作步骤）Product Specifications（产品规格） CG 宝马电动快拆底座CG 宝马电动快拆底座 使用说明书使用说明书 CG Navigator holder for BMW User Instruction FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device comp…

Text truncated - open the document above for the full version.

Shenzhen HTT Technology Co., Ltd. Report No.: HTT2026041358 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park,Hangcheng Road, Nanchang Community, Xixiang Street, Bao'an District, Guangdong Province, Shenzhen, China Page 1 of 4 Product Name: CG Navigator holder for BMW Model No.: BNH-1 EUT Constructional Details External Photo Report No.: HTT2026041358 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park,Hangcheng Road, Nanchang Community, Xixiang Street, Bao'an District, Guangdong Province, Shenzhen, China Page 2 of 4 Report No.: HTT2026041358 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park,Hangcheng Road, Nanchang Community, Xixiang Street, Bao'an District, Guangdong Province, Shenzhen, China Page 3 of 4 Report No.: HTT2026041358 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park,Hangcheng Road, Nanchang Community, Xixiang Street, Bao'an District, Guangdong Province, Shenzhen, China Page 4 of 4 ------End------

Label and Location Size: L: 2.0cm*W: 1.0cm Label and Location FCC ID : 2A95C-BNH1

Shenzhen HTT Technology Co., Ltd. Report No.: HTT2026041358 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park,Hangcheng Road, Nanchang Community, Xixiang Street, Bao'an District, Guangdong Province, Shenzhen, China Page 1 of 3 Product Name: CG Navigator holder for BMW Model No.: BNH-1 EUT Constructional Details Internal Photo ANTENNA Report No.: HTT2026041358 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park,Hangcheng Road, Nanchang Community, Xixiang Street, Bao'an District, Guangdong Province, Shenzhen, China Page 2 of 3 Report No.: HTT2026041358 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park,Hangcheng Road, Nanchang Community, Xixiang Street, Bao'an District, Guangdong Province, Shenzhen, China Page 3 of 3 ------End------

Shenzhen HTT Technology Co., Ltd. Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park, Hangcheng Road,Nanchang Community, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Page 1 of 8 RF Exposure MPE Report Reference No. ..................... : FCC ID............................................. : HTT2026041358F02 2A95C-BNH1 Compiled by ( position+printed name+signature) . : File administrators Supervised by ( position+printed name+signature) . : Project Engineer Approved by ( position+printed name+signature) . : RF Manager Date of issue .................................... : May. 11, 2026 Testing Laboratory Name .............. : Shenzhen HTT Technology Co.,Ltd. Address............................................ : 1F, Building B, Huafeng International Robotics Industrial Park, Hangcheng Road,Nanchang Community, Xixiang Street, Bao’an District, Shenzhen, Guangdong, China Applicant’s name ............................ : CHIGEE TECHNOLOGY CO., LTD. Address............................................ : Lingya Industrial Park, No. 1 Tangtou Road, Bao'an District, Shenzhen, China. Standard ........................................... : 47CFR §1.1310 47CFR §2.1091 KDB447498 D01 General RF Exposure Guidance v06 Shenzhen HTT Technology Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HTT Technology Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HTT Technology Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : CG Navigator holder for BMW Manufacturer .................................... : CHIGEE TECHNOLOGY CO., LTD. Trade Mark ........................................ CHIGEE Model/Type reference ...................... : BNH-1 Rating ............................................... : DC 12.0V Result ............................................... : PASS Report No.: HTT2026041358F02 Page 2 of 8 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park, Hangcheng Road,Nanchang Community, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Page 2 of 8 T E S T R E P O R T Equipment under Test : CG Navigator holder for BMW Model /Type : BNH-1 Listed Models : MFP0241, MFP0245, SRS-059 Model difference : The PCB board, circuit, structure and internal of these models are the same, Only model number is different for these model. Applicant : CHIGEE TECHNOLOGY CO., LTD. Address : Lingya Industrial Park, No. 1 Tangtou Road, Bao'an District, Shenzhen, China. Manufacturer : CHIGEE TECHNOLOGY CO., LTD. Address : Lingya Industrial Park, No. 1 Tangtou Road, Bao'an District, Shenzhen, China. Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: HTT2026041358F02 Page 3 of 8 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park, Hangcheng Road,Nanchang Community, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Page 3 of 8 Contents 1 T E S T S T A N D A R D S ................................................... 4 2 S U M M A R Y .............................................................. 5 2.1 General Remarks 5 2.2 Product Description 5 2.3 Special Accessories 5 2.4 Modifications 5 3 T E S T E N V I R O N M E N T 6 3.1 Address of the test laboratory 6 3.2 Test Facility 6 3.3 Statement of the measurement uncertainty 6 4 T E S T L I M I T 7 4.1 Requirement 7 4.2 MPE Calculation Method 7 4.3 Conducted Power Results 8 4.4 Manufacturing tolerance 8 4.5 Standalone MPE Result 8 4.6 Simultaneous Transmission for MPE Result 8 5 C O N C L U S I O N .......................................................... 8 Report No.: HTT2026041358F02 Page 4 of 8 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park, Hangcheng Road,Nanchang Community, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Page 4 of 8 1 T E S T S T A N D A R D S The tests were performed according to following standards: ANSI C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. FCC KDB 447498 D01 General RF Exposure Guidance v06: Mobile and Portable Device, RF Exposure, Equipment Authorization Procedures. FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1091: Radiofrequency radiation exposure evaluation: mobile devices Report No.: HTT2026041358F02 Page 5 of 8 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park, Hangcheng Road,Nanchang Community, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Page 5 of 8 2 S U M M A R Y 2.1 General Remarks Date of receipt of test sample : Apr. 28, 2026 Testing commenced on : Apr. 28, 2026 Testing concluded on : May. 11, 2026 2.2 Product Description Product Description: CG Navigator holder for BMW Model/Type reference: BNH-1 Power supply: DC 12.0V Testing sample ID： HTT2026041358-1# (Engineer sample) HTT2026041358-2# (Normal sample) Hardware version: / Software version: / Bluetooth BLE Supported type: Bluetooth low Energy Modulation: GFSK Operation frequency: 2402MHz to 2480MHz Channel number: 40 Channel separation: 2 MHz Bit Rate of Transmitter: 1Mbps/2Mbps Antenna type: Chip Antenna Antenna gain: 4.30 dBi 2.3 Special Accessories The following is the EUT test of the auxiliary equipment provided by the laboratory: Description Manufacturer …

Text truncated - open the document above for the full version.

1 Appendix RF Test Data for BLE Company: : CHIGEE TECHNOLOGY CO., LTD. EUT : CG Navigator holder for BMW FCC ID: : 2A95C-BNH1 Model Number : BNH-1 Report No. : HTT2026041358F01 Reviewed By : Heber He 2 1. Duty Cycle 1.1 Test Result 1.1.1 Ant1 Ant1 Mode TX Type Frequency (MHz) T_on (ms) Period (ms) Duty Cycle (%) Duty Cycle Correction Factor (dB) Max. DC Variation (%) 1M SISO 2402 0.480 0.625 76.80 1.15 0.03 2440 0.480 0.625 76.80 1.15 0.02 2480 0.480 0.625 76.80 1.15 0.02 2M SISO 2402 0.296 0.625 47.36 3.25 0.02 2440 0.296 0.625 47.36 3.25 0.03 2480 0.296 0.625 47.36 3.25 0.00 3 1.2 Test Graph 1.2.1 Ant1 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV 4 1M_HCH_2480MHz_Ant1_NTNV 2M_LCH_2402MHz_Ant1_NTNV 5 2M_MCH_2440MHz_Ant1_NTNV 2M_HCH_2480MHz_Ant1_NTNV 6 2. Bandwidth 2.1 Test Result 2.1.1 OBW Mode TX Type Frequency (MHz) ANT 99% Occupied Bandwidth (MHz) Verdict Result Limit 1M SISO 2402 1 1.064 / Pass 2440 1 1.048 / Pass 2480 1 1.075 / Pass 2M SISO 2402 1 2.015 / Pass 2440 1 2.011 / Pass 2480 1 2.025 / Pass 2.1.2 6dB BW Mode TX Type Frequency (MHz) ANT 6dB Bandwidth (MHz) Verdict Result Limit 1M SISO 2402 1 0.716 >=0.5 Pass 2440 1 0.711 >=0.5 Pass 2480 1 0.768 >=0.5 Pass 2M SISO 2402 1 1.295 >=0.5 Pass 2440 1 1.304 >=0.5 Pass 2480 1 1.318 >=0.5 Pass 7 2.2 Test Graph 2.2.1 OBW 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV 8 1M_HCH_2480MHz_Ant1_NTNV 2M_LCH_2402MHz_Ant1_NTNV 9 2M_MCH_2440MHz_Ant1_NTNV 2M_HCH_2480MHz_Ant1_NTNV 10 2.2.2 6dB BW 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV 11 1M_HCH_2480MHz_Ant1_NTNV 2M_LCH_2402MHz_Ant1_NTNV 12 2M_MCH_2440MHz_Ant1_NTNV 2M_HCH_2480MHz_Ant1_NTNV 13 3. Maximum Conducted Output Power 3.1 Test Result 3.1.1 Power Mode TX Type Frequency (MHz) Maximum Peak Conducted Output Power (dBm) Verdict ANT1 Limit 1M SISO 2402 3.48 <=30 Pass 2440 2.94 <=30 Pass 2480 2.95 <=30 Pass 2M SISO 2402 3.47 <=30 Pass 2440 2.97 <=30 Pass 2480 2.98 <=30 Pass 14 4. Maximum Power Spectral Density 4.1 Test Result 4.1.1 PSD Mode TX Type Frequency (MHz) Maximum PSD (dBm) Verdict ANT1 Limit(dBm/3kHz) 1M SISO 2402 2.61dBm/100kHz <=8 Pass 2440 2.05dBm/100kHz <=8 Pass 2480 2.08dBm/100kHz <=8 Pass 2M SISO 2402 1.17dBm/100kHz <=8 Pass 2440 0.40dBm/100kHz <=8 Pass 2480 0.77dBm/100kHz <=8 Pass 15 4.2 Test Graph 4.2.1 PSD 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV 16 1M_HCH_2480MHz_Ant1_NTNV 2M_LCH_2402MHz_Ant1_NTNV 17 2M_MCH_2440MHz_Ant1_NTNV 2M_HCH_2480MHz_Ant1_NTNV 18 5. Unwanted Emissions In Non-restricted Frequency Bands 5.1 Test Result 5.1.1 Ref Mode TX Type Frequency (MHz) ANT Level of Reference (dBm) 1M SISO 2402 1 2.57 2440 1 2.04 2480 1 2.06 2M SISO 2402 1 1.18 2440 1 0.45 2480 1 0.62 5.1.2 CSE Mode TX Type Frequency (MHz) ANT Level of Reference (dBm) Limit (dBm) Verdict 1M SISO 2402 1 2.57 -17.43 Pass 2440 1 2.04 -17.96 Pass 2480 1 2.06 -17.94 Pass 2M SISO 2402 1 1.18 -18.82 Pass 2440 1 0.45 -19.55 Pass 2480 1 0.62 -19.38 Pass 19 5.2 Test Graph 5.2.1 Ref 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV 20 1M_HCH_2480MHz_Ant1_NTNV 2M_LCH_2402MHz_Ant1_NTNV 21 2M_MCH_2440MHz_Ant1_NTNV 2M_HCH_2480MHz_Ant1_NTNV 22 5.2.2 CSE 1M_LCH_2402MHz_Ant1_NTNV 1M_LCH_2402MHz_Ant1_NTNV 23 1M_MCH_2440MHz_Ant1_NTNV 1M_HCH_2480MHz_Ant1_NTNV 24 1M_HCH_2480MHz_Ant1_NTNV 2M_LCH_2402MHz_Ant1_NTNV 25 2M_LCH_2402MHz_Ant1_NTNV 2M_MCH_2440MHz_Ant1_NTNV 26 2M_HCH_2480MHz_Ant1_NTNV 2M_HCH_2480MHz_Ant1_NTNV

Shenzhen HTT Technology Co., Ltd. Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park, Hangcheng Road,Nanchang Community, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. ...................: FCC ID. ......................................... : HTT2026041358F01 2A95C-BNH1 Compiled by ( position+printed name+signature) : File administrators Supervised by ( position+printed name+signature) : Project Engineer Approved by ( position+printed name+signature) : RF Manager Date of issue ...................................: May. 11, 2026 Testing Laboratory Name .............: Shenzhen HTT Technology Co.,Ltd. Address ...........................................: 1F, Building B, Huafeng International Robotics Industrial Park, Hangcheng Road,Nanchang Community, Xixiang Street, Bao’an District, Shenzhen, Guangdong, China Applicant’s name...........................: CHIGEE TECHNOLOGY CO., LTD. Address ...........................................: Lingya Industrial Park, No. 1 Tangtou Road, Bao'an District, Shenzhen, China. Test specification ......................... : Standard ..........................................: FCC Part 15.247 Shenzhen HTT Technology Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HTT Technology Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HTT Technology Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Equipment description ................ : CG Navigator holder for BMW Trade Mark ......................................: CHIGEE Manufacturer ...................................: CHIGEE TECHNOLOGY CO., LTD. Model/Type reference .....................: BNH-1 Listed Models ..................................: MFP0241, MFP0245, SRS-059 Modulation ......................................: GFSK Frequency ........................................ From 2402MHz to 2480MHz Ratings ............................................: DC 12.0V Result ..............................................: PASS Report No.: HTT2026041358F01 Page 2 of 32 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park, Hangcheng Road,Nanchang Community, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China T E S T R E P O R T Equipment under Test : CG Navigator holder for BMW Model /Type : BNH-1 Listed Models : MFP0241, MFP0245, SRS-059 Model difference : The PCB board, circuit, structure and internal of these models are the same, Only model number is different for these model. Applicant : CHIGEE TECHNOLOGY CO., LTD. Address : Lingya Industrial Park, No. 1 Tangtou Road, Bao'an District, Shenzhen, China. Manufacturer : CHIGEE TECHNOLOGY CO., LTD. Address : Lingya Industrial Park, No. 1 Tangtou Road, Bao'an District, Shenzhen, China. Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: HTT2026041358F01 Page 3 of 32 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park, Hangcheng Road,Nanchang Community, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Contents 1 TEST STANDARDS .......................................................................................................................................... 4 2 SUMMARY ........................................................................................................................................................ 5 2.1 General Remarks .................................................................................................................................... 5 2.2 Product Description ................................................................................................................................. 5 2.3 Equipment Under Test ............................................................................................................................ 5 2.4 Short description of the Equipment under Test (EUT) ............................................................................ 5 2.5 EUT configuration .................................................................................................................................... 5 2.6 EUT operation mode ............................................................................................................................... 5 2.7 Block Diagram of Test Setup .................................................................................................................. 6 2.8 Related Submittal(s) / Grant (s) .............................................................................................................. 6 2.9 Modifications ........................................................................................................................................... 6 3 TEST ENVIRONMENT ...................................................................................................................................... 7 3.1 Address of the test laboratory ................................................................................................................. 7 3.2 Test Facility ............................................................................................................................................. 7 3.3 Environmental conditions ........................................................................................................................ 7 3.4 Summary of measurement results .....................................…

Text truncated - open the document above for the full version.

Shenzhen HTT Technology Co., Ltd. Report No.: HTT2026041358 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park,Hangcheng Road, Nanchang Community, Xixiang Street, Bao'an District, Guangdong Province, Shenzhen, China Page 1 of 2 Product Name: CG Navigator holder for BMW Model No.: BNH-1 Test Setup Photo Radiated Emission Report No.: HTT2026041358 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park,Hangcheng Road, Nanchang Community, Xixiang Street, Bao'an District, Guangdong Province, Shenzhen, China Page 2 of 2 RF Test ------End------