2A95C-CGRCBluetooth remote control

CG Remote Control Pro Instructions for use Before using the product, read this manual carefully and keep it properly 产品图解 功能说明 配对 产品信息 投屏模式 短按：“ ”或“ ”左右移动 “ ”确定，长按返回。 接听/左键返回/确认键 充电指示灯 充电指示灯 按键指示灯 红色：充电中 绿色：充满 蓝色：配对中 按键指示灯 挂断/右键 *投屏控制支持Carplay、Auto、Hicar、蓝牙模式。 2.短按遥控器任意按键（遥控器蓝色指示灯快闪），等待AIO-5显示“已配对” 1.进入系统设置-设备-遥控器-点击“配对” 如配对超时请重复以上操作。 蓝灯快闪 蓝牙模式 短按：“ ”或“ ”切换歌曲 “ ”暂停/播放。 录像预览页 短按：“ ”切换摄像头 “ ”锁定视频 “ ”拍照 任意画面 长按：“ ”或“ ”切换应用 “ ”返回。 名 称： CG遥控器Pro P/N： MSFP0089 产品尺寸： 65.7*26.8*18.9mm 材 质： PC+GF10％ 接 口： Type-C 工作频率： 2400 - 2483.5MHz 电 池： 3.7V 300mah 充 电： 5V - 0.5A 遥控器 遥控器 遥控器状态 未连接 配对 CG遥控器 Pro 使用说明书 使用产品前请仔细阅读本使用说明，并妥善保管 Introduce Function Introduction pairing OPI Operating frequency Charging interface Link The application operation control can be carried out through the remote control on the screen projection pages of Carplay, Auto, and Hicar. Answer/LeftReturn/OK Charging indicator Charging indicator Button light Red: Charging Green:full charge Blue: Click Button light Ring off/Right *The projection control supports Carplay, Auto, Hicar, and Bluetooth modes. 2.Short press any button on the remote control (the blue indicator light on the remote control flashes quickly) and wait for AIO-5 to display " paired 1.Go to System Settings - Devices - Remote Control - Click on 'Pair' If pairing timeout occurs, please repeat the above operation Blue light flashing fast CG Remote Control Pro Bluetooth When in Bluetooth mode, briefly press the left and right buttons to switch songs, and the middle button can play/pause. Video When in the recording screen, you can switch between camera preview, lock the video, and take photos. Any state Under any screen, you can long press to switch to the homepage, screen projection camera screen, and short press to control incoming and outgoing calls. Name P/N MSFP0089 Size 65.7*26.8*18.9mm Material PC+GF10％ Type-C 2400 - 2483.5MHz battery 3.7V 300mah charge 5V - 0.5A Compliance Standard：GB4943.1-2022 Manufacturer: CHIGEE Technology Co.,Ltd Production Address: 2nd Floor, Building 2, Sanlian Industrial Park, Shiyant Street,Bao'an District, Shenzhen remote controller remote controller Remote control status Not connected pairing CHIGEE公众号 生产厂商：深圳市骑技科技有限公司 生产地址：深圳市宝安区石岩街道三联工业区二栋二层 执行标准：GB4943.1-2022 FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Sincerely, Name/Title： Weihua Zhong/Manager Company: CHIGEE TECHNOLOGY CO., LTD. Address: 2 Building 2F, Da er shan Sanlian Industrial District, Tangtou Community, Shiyan Street Bao'an District, Shenzhen City, Guangdong Province China Phone: +86-0755-29365261 Fax: N/A E-Mail: [email protected]

Shenzhen HTT Technology Co., Ltd. Report No.: HTT202309333 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park,Hangcheng Road, Nanchang Community, Xixiang Street, Bao'an District, Guangdong Province, Shenzhen, China Page 1 of 4 Product Name: Bluetooth remote control Model No.: CGRC EUT Constructional Details External Photo Report No.: HTT202309333 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park,Hangcheng Road, Nanchang Community, Xixiang Street, Bao'an District, Guangdong Province, Shenzhen, China Page 2 of 4 Report No.: HTT202309333 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park,Hangcheng Road, Nanchang Community, Xixiang Street, Bao'an District, Guangdong Province, Shenzhen, China Page 3 of 4 Report No.: HTT202309333 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park,Hangcheng Road, Nanchang Community, Xixiang Street, Bao'an District, Guangdong Province, Shenzhen, China Page 4 of 4 ------End------

Label and Location Size: L: 2.0cm*W: 1.0cm Label and Location FCC ID : 2A95C-CGRC

Shenzhen HTT Technology Co., Ltd. Report No.: HTT202309333 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park,Hangcheng Road, Nanchang Community, Xixiang Street, Bao'an District, Guangdong Province, Shenzhen, China Page 1 of 3 Product Name: Bluetooth remote control Model No.: CGRC EUT Constructional Details Internal Photo Report No.: HTT202309333 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park,Hangcheng Road, Nanchang Community, Xixiang Street, Bao'an District, Guangdong Province, Shenzhen, China Page 2 of 3 Report No.: HTT202309333 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park,Hangcheng Road, Nanchang Community, Xixiang Street, Bao'an District, Guangdong Province, Shenzhen, China Page 3 of 3 ------End------

RF Exposure evaluation FCC ID: 2A95C-CGRC 1.1. Applicable Standard According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1093 RF exposure requirement KDB447498 v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies 1.2. Requirement According to KDB447498 D01 General RF Exposure Guidance v06 Section 4.3.1 Standalone SAR test exclusion considerations: “Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition, listed below, is satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions.22 The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander (see 5) of section 4.1). To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, typically in the SAR measurement or SAR analysis report, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting is required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for the SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions; for example, handheld PTT two-way radios, handsets, laptops & tablets etc.23 “ [(max. power of channel, including tune-up tolerance, mW)/ (min. test separation distance, mm)] · [√f (GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f (GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. 1.3. Manufacturing tolerance GFSK (Peak) Channel Channel 0 Channel 19 Channel 39 Target (dBm) -2.0 -3.0 -2.0 Tolerance ±(dB) 1.0 1.0 1.0 Page 2 of 2 2. E v a l u a t i o n R e s u l t Evaluation Results Band/Mode f (GHz) Antenna Distance (mm) RF output power (including tune-up tolerance) SAR Test Exclusion Threshold SAR Test Exclusion dBm mW BT 2.450 5 -1.0 0.7943 0.2487<3.0 Yes 3. C o n c l u s i o n The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06 .....................End of Report.........................

ShenzhenXiangboyiTechnologyCo.Ltd Tel:(+86)0755-29369912Fax:(+86)0755-61624200 R&DCenter:101,floor1,Wenchengbuilding,YousongCulturalInnovationPark,No.95, YousongRoad,LonghuaDistrict,Shenzhen. ProductionBase:5/F,buildingB,Huazhichuanggu,No.7,Yuhuastreet,138Industrial Zone,TangxiaTown,DongguanCity. -1-/11 Customer Ridingskills Project ProjectNOXBY230622-BT Date：2023/8/5 ShenzhenXiangboyi TechnologyCo.Ltd Antenna Specification ShenzhenXiangboyiTechnologyCo.Ltd Tel:(+86)0755-29369912Fax:(+86)0755-61624200 R&DCenter:101,floor1,Wenchengbuilding,YousongCulturalInnovationPark,No.95, YousongRoad,LonghuaDistrict,Shenzhen. ProductionBase:5/F,buildingB,Huazhichuanggu,No.7,Yuhuastreet,138Industrial Zone,TangxiaTown,DongguanCity. -2-/11 Customerconfirmation EngineerPMQualityApproval Supplierconfirmation MERFExamineApproval Samplepaste ShenzhenXiangboyiTechnologyCo.Ltd Tel:(+86)0755-29369912Fax:(+86)0755-61624200 R&DCenter:101,floor1,Wenchengbuilding,YousongCulturalInnovationPark,No.95, YousongRoad,LonghuaDistrict,Shenzhen. ProductionBase:5/F,buildingB,Huazhichuanggu,No.7,Yuhuastreet,138Industrial Zone,TangxiaTown,DongguanCity. -3-/11 Catalogue 1TestSystemandEquipment..........................................-4- 2ProductDescription............................................................-5- 3DeviceDescription..............................................................-6- 4MatchingCircuits.................................................................-7- 5TestData............................................................. 6EngineeringDrawing........................................................-10- 7.PhysicalAssemblyPicture-10- .............. - 8 - ShenzhenXiangboyiTechnologyCo.Ltd Tel:(+86)0755-29369912Fax:(+86)0755-61624200 R&DCenter:101,floor1,Wenchengbuilding,YousongCulturalInnovationPark,No.95, YousongRoad,LonghuaDistrict,Shenzhen. ProductionBase:5/F,buildingB,Huazhichuanggu,No.7,Yuhuastreet,138Industrial Zone,TangxiaTown,DongguanCity. -4-/11 1TestSystemandEquipment Testitemsequipment 1 ： Sparameter 1. 1. Return Return loss loss 2. 2. VSWR VSWR Network Network analyzer: analyzer: A338/A333/HP8753D A338/A333/HP8753D 2：Activetest Comprehensive Comprehensive test test instrument: instrument: Agilent Agilent 8960/ 8960/ CMW500 CMW500 3：Radiationmode andgain 1. 1. Radiation Radiation mode mode 2. 2. Gain Gain 1. 1. Shielding Shielding room room ： ： 7x4x3 7x4x3 m m (ETS-3D) (ETS-3D) 2. 2. Network Network analyzer analyzer ： ： HP HP 8753D 8753D ShenzhenXiangboyiTechnologyCo.Ltd Tel:(+86)0755-29369912Fax:(+86)0755-61624200 R&DCenter:101,floor1,Wenchengbuilding,YousongCulturalInnovationPark,No.95, YousongRoad,LonghuaDistrict,Shenzhen. ProductionBase:5/F,buildingB,Huazhichuanggu,No.7,Yuhuastreet,138Industrial Zone,TangxiaTown,DongguanCity. -5-/11 2ProductDescription TechnicalrequirementsTechnicalindexRemarks Band BT RangeOfFrequency BT:2400-2500Mhz VSWR <2.0CenterFrequency Impendance 50Ω Polarization Linearpolarization operatingtemperature -32°C/+55°C storagetemperature -55°C/+85°C SaltFog 24h(24halterningwet&dry) RoHSCompliant yes ShenzhenXiangboyiTechnologyCo.Ltd Tel:(+86)0755-29369912Fax:(+86)0755-61624200 R&DCenter:101,floor1,Wenchengbuilding,YousongCulturalInnovationPark,No.95, YousongRoad,LonghuaDistrict,Shenzhen. ProductionBase:5/F,buildingB,Huazhichuanggu,No.7,Yuhuastreet,138Industrial Zone,TangxiaTown,DongguanCity. -6-/11 3DeviceDescription Thewholemachinephoto ShenzhenXiangboyiTechnologyCo.Ltd Tel:(+86)0755-29369912Fax:(+86)0755-61624200 R&DCenter:101,floor1,Wenchengbuilding,YousongCulturalInnovationPark,No.95, YousongRoad,LonghuaDistrict,Shenzhen. ProductionBase:5/F,buildingB,Huazhichuanggu,No.7,Yuhuastreet,138Industrial Zone,TangxiaTown,DongguanCity. -7-/11 4MatchingCircuits ElementValueVender E1(0402)NA E2(0402)0Ω E3(0402)NA E4(0402)0Ω Originalmatchunchanged. ShenzhenXiangboyiTechnologyCo.Ltd Tel:(+86)0755-29369912Fax:(+86)0755-61624200 R&DCenter:101,floor1,Wenchengbuilding,YousongCulturalInnovationPark,No.95, YousongRoad,LonghuaDistrict,Shenzhen. ProductionBase:5/F,buildingB,Huazhichuanggu,No.7,Yuhuastreet,138Industrial Zone,TangxiaTown,DongguanCity. -8-/11 5PassiveTestData ShenzhenXiangboyiTechnologyCo.Ltd Tel:(+86)0755-29369912Fax:(+86)0755-61624200 R&DCenter:101,floor1,Wenchengbuilding,YousongCulturalInnovationPark,No.95, YousongRoad,LonghuaDistrict,Shenzhen. ProductionBase:5/F,buildingB,Huazhichuanggu,No.7,Yuhuastreet,138Industrial Zone,TangxiaTown,DongguanCity. -9-/11 Radiationpattern ShenzhenXiangboyiTechnologyCo.Ltd Tel:(+86)0755-29369912Fax:(+86)0755-61624200 R&DCenter:101,floor1,Wenchengbuilding,YousongCulturalInnovationPark,No.95, YousongRoad,LonghuaDistrict,Shenzhen. ProductionBase:5/F,buildingB,Huazhichuanggu,No.7,Yuhuastreet,138Industrial Zone,TangxiaTown,DongguanCity. -10-/11 6EngineeringDrawing ShenzhenXiangboyiTechnologyCo.Ltd Tel:(+86)0755-29369912Fax:(+86)0755-61624200 R&DCenter:101,floor1,Wenchengbuilding,YousongCulturalInnovationPark,No.95, YousongRoad,LonghuaDistrict,Shenzhen. ProductionBase:5/F,buildingB,Huazhichuanggu,No.7,Yuhuastreet,138Industrial Zone,TangxiaTown,DongguanCity. -11-/11 7.PhysicalAssemblyPicture

Shenzhen HTT Technology Co., Ltd. Report No.: HTT202309333F01 This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 30 TEST Report Applicant: CHIGEE TECHNOLOGY CO., LTD. Address of Applicant: 2 Building 2F, Da er shan Sanlian Industrial District, Tangtou Community, Shiyan Street, Bao'an District, Shenzhen City, Guangdong Province. Manufacturer : CHIGEE TECHNOLOGY CO., LTD. Address of Manufacturer : 2 Building 2F, Da er shan Sanlian Industrial District, Tangtou Community, Shiyan Street, Bao'an District, Shenzhen City, Guangdong Province. Equipment Under Test (EUT) Product Name: Bluetooth remote control Model No.: CGRC Series model: CGRC PRO, CGRC CAN, SRS-006, MFP0119 Trade Mark: CHIGEE FCC ID: 2A95C-CGRC Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of sample receipt: Sep.18,2023 Date of Test: Sep.18,2023~Sep.25,2023 Date of report issued: Sep.25,2023 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: HTT202309333F01 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park, Hangcheng Road,Nanchang Community, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Page 2 of 30 1. Version Version No. Date Description 00 Sep.25,2023 Original Tested/ Prepared By Date: Sep.25,2023 Project Engineer Check By: Date: Sep.25,2023 Reviewer Approved By : Date: Sep.25,2023 Authorized Signature Report No.: HTT202309333F01 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park, Hangcheng Road,Nanchang Community, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Page 3 of 30 2. Contents Page 1. VERSION ........................................................................................................................................................ 2 2. CONTENTS .................................................................................................................................................... 3 3. TEST SUMMARY ........................................................................................................................................... 4 4. GENERAL INFORMATION ............................................................................................................................ 5 4.1. GENERAL DESCRIPTION OF EUT ................................................................................................................ 5 4.2. TEST MODE ............................................................................................................................................... 7 4.3. DESCRIPTION OF SUPPORT UNITS .............................................................................................................. 7 4.4. DEVIATION FROM STANDARDS .................................................................................................................... 7 4.5. ABNORMALITIES FROM STANDARD CONDITIONS ........................................................................................... 7 4.6. TEST FACILITY ........................................................................................................................................... 7 4.7. TEST LOCATION ......................................................................................................................................... 7 4.8. ADDITIONAL INSTRUCTIONS ........................................................................................................................ 7 5. TEST INSTRUMENTS LIST ........................................................................................................................... 8 6. TEST RESULTS AND MEASUREMENT DATA ........................................................................................... 9 6.1. CONDUCTED EMISSIONS ............................................................................................................................ 9 6.2. CONDUCTED OUTPUT POWER .................................................................................................................. 12 6.3. CHANNEL BANDWIDTH .............................................................................................................................. 13 6.4. POWER SPECTRAL DENSITY ..................................................................................................................... 15 6.5. BAND EDGES ........................................................................................................................................... 17 6.5.1 Conducted Emission Method .......................................................................................................... 17 6.5.2 Radiated Emission Method ............................................................................................................. 18 6.6. SPURIOUS EMISSION ................................................................................................................................ 20 6.6.1 Conducted Emission Method .......................................................................................................... 20 6.6.2 Radiated Emission Method ............................................................................................................. 22 6.7. ANTENNA REQUIREMENT .......................................................................................................................... 29 7. TEST SETUP PHOTO .................................................................................................................................. 30 8. EUT CONSTRUCTIONAL DETAILS .............................…

Text truncated - open the document above for the full version.

Shenzhen HTT Technology Co., Ltd. Report No.: HTT202309333 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park,Hangcheng Road, Nanchang Community, Xixiang Street, Bao'an District, Guangdong Province, Shenzhen, China Page 1 of 2 Product Name: Bluetooth remote control Model No.: CGRC Test Setup Photo Radiated Emission Report No.: HTT202309333 Shenzhen HTT Technology Co.,Ltd. Tel: 0755-23595200 Fax: 0755-23595201 1F, Building B, Huafeng International Robotics Industrial Park,Hangcheng Road, Nanchang Community, Xixiang Street, Bao'an District, Guangdong Province, Shenzhen, China Page 2 of 2 Conducted Emission ------End------