2A9YKCWWTWSCENEWHSmart Wi-Fi Room Controller

Contents • Download the app • Add a device in your app using Smart Pairing • Wiring Instructions • Single pole and 3-way wiring diagram • Pre-installation preparation • Installation steps Section 1. Installation Section 2. Wiring Diagram For more details, please refer to the manual. If you have any questions during installation, please contact us [email protected] Section 3. APP Pairing CAUTION - PLEASE READ! This device is intended for installation in accordance with the National Electric Code and local regulations in the United States, or the Canadian Electrical Code and local regulations in Canada. If you are unsure or uncomfortable about performing this installation consult a qualified electrician. WARNING - SHOCK HAZARD TURN OFF THE POWER to the circuit for the switch and lighting fixture at the service panel (circuit breaker) prior to installation. ALL WIRING CONNECTIONS MUST BE MADE WITH THE POWER OFF to avoid personal injury and/or damage to the switch. OTHER WARNINGS Risk of Fire Risk of Electrical Shock Risk of Burns V1.0 FCC This device complies with part 15 of the FCC and Industry Canada license-exempt RSS standard(s). Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Important note: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator&your body. SIZE: 420 x 297 mm 80G 105 x 49.5 mm SIZE: 420 x 297mm Pantone 2995C/CP Material: 80G writing paper Dismantling method: organ page 105 x 49.5 mm finished product wire nuts x4 screws x2 Room Controller x1 Smart Wi-Fi Room Controller Single Pole or 3-Way Compatible CWW-TW-SCENE-WH Specifications: Included in Box: A quick note before we go over the wiring schematics. Please do not try installing this device if you are unsure of how electrical circuits operate within your home. As exciting as it is to have a smart switch installed, it can be dangerous and even life-threatening if you do not install this correctly. Please consult a qualified electrician if necessary. A Few Quick Reminders If you have any questions, please contact us at [email protected] Power: 120V AC, 60Hz Wireless Frequency: 2.4GHz Wireless Standard: IEEE802.11b/g/n Maximum Load: 600W for hardwired loads No Maximum for wireless loads Temperature Range: 32° F~104° F Range: up to 50 ft radius from Wi-Fi Access point Indoor use. For control of WiZ Connected smart loads only Note before installation 1) The Pure Smart Room Controller must not exceed 600W for hardwired loads. Hardwired installation is optional. No load maximum for wireless loads. 2) Works with smart loads only. Not for use with non-smart bulbs or fixtures. Compatible with any WiZ Connected or Pure Smart lamp/fixture/device. 3) Works only with another Pure Smart or WiZ Connected wall control for 2 location control. Only compatible with SWW-SWT-WH, SWW-DIM-WH, CWW-TW-SCENE-WH, and CWR-TW-SCENE-WH for multi-location control. May NOT be used with traditional non-smart 3-way/4way on-off combinations. 4) Please check the original 3-way wiring in your home before installation, and then follow the wiring diagram included here in the manual. 5) Install the smart room controller in the electrical box which directly connects to the power Line and Neutral. 6) This room controller requires a Neutral for installation. 7) Not recommended for use with a fan. Section 2. Wiring Diagram 1. Tools Needed: Flat Head Screwdriver. 2. Turn power OFF at circuit breaker or fuse box. 3. Remove wallplate. 4. Remove the switch mounting screws. Line Load GroundNeutral 5. Disconnect the wires and label them after removing the old switch. Please use our sticker. 6. There are 4 different colored wire leads on the smart room controller, each of these are marked. Refer to the wiring diagrams included here for how to connect the wire leads with the existing conductors in the electrical box. 7. After successful wiring, install the wall plate with the included screws. Installation NeutralNeutral LineLine 120VAC 60 Hz 120VAC 60 Hz BlackBlack Black White White Load Load (Optional) White GreenGreen Ground Ground CWW-TW-SCENE-WHCWW-TW-SCENE-WH Load, Pure Smart Light Fixture or Bulb …

Text truncated - open the document above for the full version.

1/1 USAgentforServiceofProcessLETTEROFATTESTATION TO: OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USAgentforServiceofProcess: CompanyName:PureEdgeLightingLLC. FRN:0032171019 ContactName:BlakeMatthew Address:1718W.FullertonAve.Chicago,IL60614UnitedStates TelephoneNo:(224)735-5497 Email:[email protected] Applicant: Companyname:PureEdgeLightingLLC. ProductDescription:SmartWi-FiRoomController Granteecode:2A9YK FCCID:2A9YKCWWTWSCENEWH ContactName:BlakeMatthew Address:1718W.FullertonAveChicagoIllinois,60614,UnitedStates TelephoneNo:(224)735-5497 Email:[email protected] [PureEdgeLightingLLC.]certifiesthat,asofthedateofthisfilingofthe applicationwiththeTCB,[PureEdgeLightingLLC.]isourdesignatedUSagent forserviceofprocessfortheabovereferencedFCCID.[PureEdgeLighting LLC.]acceptstomaintainanagentfornolessthanoneyearafterthegrantee hasterminatedallmarketingandimportationortheconclusionofany commissionrelatedproceedinginvolvingequipment.[PureEdgeLightingLLC.] accepts,asofthedateofthefilingoftheapplication,theobligationofthe designatedUSagentforserviceofprocessfortheabovereferenceFCCID. TheUSAgentforServiceofProcessisawareofandagreestocomplywiththerequirements outlinedintheFCCEquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause §2.911. TheApplicantisawareofandagreestocomplywiththerequirementsoutlinedintheFCC EquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause§2.911. Date:2023/06/19 Applicant’sName:BlakeMatthewUSAgent’sName:BlakeMatthew Title:NationalSalesManager-Smart Technology Title:NationalSalesManager-Smart Technology SignatureSignature

C5266091_X24_Ed.2 1/1 PureEdgeLightingLLC. “AttestationStatements” TO: OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 TheCommissionadoptedrulesthatprohibitequipmentauthorizationfor“covered” telecommunicationsequipmentandvideosurveillanceequipmentproducedbyentitiesidentified ontheCommission’sCoveredList 1 ,whichisperiodicallyupdated.SeetheCoveredListformore details.ThisAttestationStatementistoconfirmthatwefollowtheSection2.911(d)(5)(i)-(ii) Applicant Companyname:PureEdgeLightingLLC. Granteecode:2A9YK FCCID:2A9YKCWWTWSCENEWH ContactName:BlakeMatthew Address:1718W.FullertonAveChicagoIllinois,60614,UnitedStates TelephoneNo:(224)735-5497 FaxNo:(224)735-5497 Email:[email protected] i.[PureEdgeLightingLLC.](“theapplicant”)certifiesthattheequipmentfor whichauthorizationissoughtisnot“covered”equipmentprohibitedfrom receivinganequipmentauthorizationpursuanttosection2.903oftheFCC rules.Theapplicantmustsignthiscertification. ii.[PureEdgeLightingLLC.](“theapplicant”)certifiesthat,asofthedateof thefilingoftheapplication,theapplicant[isnot](asaspecificallynamed entityoranyofitssubsidiariesoraffiliates)identifiedontheCoveredListas anentityproducing“covered”equipment.Theapplicantmustsignthis certification. [PureEdgeLightingLLC.](“theapplicant”)certifiesthat,asofthedateofthefiling oftheapplication,theapplicant[isnot]identifiedontheCoveredList asanentityproducing“covered”equipment. Date:2023/06/19 Applicant’sName:BlakeMatthew Title:NationalSalesManager-Smart Technology Signature 1 TheCommission’sCoveredListispublishedbythePublicSafetyandHomelandSecurityBureauandpostedonthe Commission’swebsite.ThisCoveredList,whichisperiodicallyupdated,identifiesparticularequipment,producedby particularentities,thatconstitutes“covered”equipment.https://www.fcc.gov/supplychain/coveredlist

PureEdgeLightingLLC. ProductSimilarityDeclaration Productname: SmartWi-FiRoomController Modelname: CWW-TW-SCENE-WH,Wiz33 FCCID/ISED:2A9YKCWWTWSCENEWH We(PureEdgeLightingLLC.)herebystatethatallthemodelsare electricalidenticalincludingthesamesoftwareparameterand hardwaredesign(i.e.,circuitdesign,PCBLayout,RF module/circuit,antennatype(s)andantennalocation,components onPCB,etc.,),samemechanicalstructureanddesign(including productenclosure,materials,etc.,),theonlydifferenceisthe modelname. Signature: Name:BlakeMatthew Title:NationalSalesManager-SmartTechnology UnitedStates,June19,2023

C5266091_X8_Ed.1 1/1 LetterofAuthorization PureEdgeLightingLLC. Company:PureEdgeLightingLLC. Address:1718W.FullertonAveChicagoIllinois,60614,United States ProductName:SmartWi-FiRoomController ModelNumber:CWW-TW-SCENE-WH,Wiz33 FCCIdentifier:2A9YKCWWTWSCENEWH WeauthorizeLGAITechnologicalCenterS.A.,RondadelaFontdelCarme,s/n, 08193Bellaterra,Spain,toactonourbehalfonallmattersconcerningthe abovenamedequipment. AnyindividualwithinLGAITechnologicalCenterS.A.isauthorizedtoactonour behalfandtakeactionontheapplication. WedeclarethatauthorizeLGAITechnologicalCenterS.A.,RondadelaFontdel Carme,s/n,08193Bellaterra,Spain,isallowedtoforwardallinformation relatedtotheapprovalprojecttotheFederalCommunicationCommissionand todiscussanyissuesconcerningtheapprovalapplication.Anyandallacts carriedoutbyLGAITechnologicalCenterS.A.onourbehalfshallhavethe sameeffectasactsofourown. Name:BlakeMatthewDate:2023-06-19 Title:NationalSalesManager-SmartTechnology Signatureofapplicant:

C5266091_X10_Ed.2 1/1 PureEdgeLightingLLC. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 Date:2023-06-19 Subject:RequestforConfidentiality FCCID:2A9YKCWWTWSCENEWH ToWhomItMayConcern, PursuanttotheprovisionsofSections0.457and0.459ofCommission'srules (47CFR0.457,0.459),wearerequestingtheCommissiontowithholdthefollowing attachment(s)asconfidentialdocumentfrompublicdisclosure. ExhibitsLong-Term Confidentiality Short-Term Confidentiality NOTE2 IDLabel/LocationNoNo AttestationStatementNoNo ExternalPhotosNo ☐ BlockDiagram ☒☐ Schematics ☒☐ TestReportNoNo TestSetupPhotosNo ☐ User’sManual ☐ NOTE 1 ☐ InternalPhotos ☐ NOTE 1 ☐ PartsList/TuneUp ☐☐ RFExposureInfoNoNo OperationalDescription ☒☐ CoverLetter(s)NoNo SDRSoftware/SecurityInfo ☐ No NOTE1:Long-TermConfidentialitymaybepermittedunderspecialconditions(SeeII.LONG-TERMCONFIDENTIALITY,Section3of KDB726920,uselastinforce) NOTE2:Short-TermConfidentialitycanberequestedforamaximumof180daysfromthedateofthegrant. Abovementioneddocumentcontainsdetailedsystemandequipmentdescriptionare consideredasproprietaryinformationinoperationoftheequipment.Thepublic disclosureofabovedocumentsmightbeharmfultoourcompanyandwouldgive competitoranunfairadvantageinthemarket. Incaseofshort-termConfidentiality,theapplicantrequeststheexhibitsselected abovearewithheldfrompublicviewforaperiodofdaysfromthedateofthe GrantofEquipmentAuthorizationandpriortomarketing. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondentduringcertificationreviewprocesscannotbegrantedasconfidential documentsandthoseinformationwillbeavailableforpublicreviewoncethegrantof equipmentauthorizationisissued. Sincerely, C5266091_X10_Ed.2 1/1 Signature: Name:BlakeMatthew Title:NationalSalesManager-SmartTechnology

FCCID:2A9YKCWWTWSCENEWH 1/3 FCCID:2A9YKCWWTWSCENEWH 2/3 FCCID:2A9YKCWWTWSCENEWH 3/3

1/1

FCCID:2A9YKCWWTWSCENEWH 1/9 FCCID:2A9YKCWWTWSCENEWH 2/9 FCCID:2A9YKCWWTWSCENEWH 3/9 FCCID:2A9YKCWWTWSCENEWH 4/9 FCCID:2A9YKCWWTWSCENEWH 5/9 ANT FCCID:2A9YKCWWTWSCENEWH 6/9 FCCID:2A9YKCWWTWSCENEWH 7/9 FCCID:2A9YKCWWTWSCENEWH 8/9 FCCID:2A9YKCWWTWSCENEWH 9/9

Report No.: PTC23060810101E-FC02 Page 1 of 7 FCC TEST REPORT FCC ID: 2A9YKCWWTWSCENEWH Product : Smart Wi-Fi Room Controller Model Name : CWW-TW-SCENE-WH, Wiz33 Brand : N/A Report No. : PTC23060810101E-FC02 Prepared for Pure Edge Lighting LLC. 1718 W. Fullerton Ave ChicagoIllinois, 60614, United States Prepared by Precise Testing & Certification Co., Ltd. Building 1, No. 6, Tongxin Road, Dongcheng Street, Dongguan, Guangdong, China. Report No.: PTC23060810101E-FC02 Page 2 of 7 TEST RESULT CERTIFICATION Applicant’s name : Pure Edge Lighting LLC. Address : 1718 W. Fullerton Ave ChicagoIllinois, 60614, United States Manufacture's name : NIE-TECH Co., Ltd Address : Jinlian commercial center 9001, Jinxiu road No.2, Changan Town,Dongguan City, GuangDongProv., CHINA Product name : Smart Wi-Fi Room Controller Model name : CWW-TW-SCENE-WH, Wiz33 Test procedure : FCC CFR47 Part 1.1307(b)(1) Test Date : Jun. 09, 2023 to Jun. 17, 2023 Date of Issue : Jun. 28, 2023 Test Result : PASS This device described above has been tested by PTC, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of PTC, this document may be altered or revised by PTC, personal only, and shall be noted in the revision of the document. Test Engineer: Simon Pu / Engineer Technical Manager: Ronnie Liu / Manager Report No.: PTC23060810101E-FC02 Page 3 of 7 Contents Page 2 TEST SUMMARY .............................................................................................................................................. 4 3 GENERAL INFORMATION ............................................................................................................................. 5 3.1 GENERAL DESCRIPTION OF E.U.T. ......................................................................................................... 5 4 RF EXPOSURE ................................................................................................................................................. 6 4.1 REQUIREMENTS ....................................................................................................................................... 6 4.2 THE PROCEDURES / LIMIT ........................................................................................................................ 6 4.3 MPE CALCULATION METHOD ................................................................................................................. 7 4.4 TEST RESULT .......................................................................................................................................... 7 Report No.: PTC23060810101E-FC02 Page 4 of 7 2 Test Summary Test Items Test Requirement Result Maximum Permissible Exposure (Exposure of Humans to RF Fields) 15.247 (i) PASS Remark: N/A: Not Applicable Report No.: PTC23060810101E-FC02 Page 5 of 7 3 General Information 3.1 General Description of E.U.T. Product Name : Smart Wi-Fi Room Controller Model Name : CWW-TW-SCENE-WH Additional model : Wiz33 Model difference : Different model names Specification : 802.11b/g/n HT20 Operation Frequency : 2412-2462MHz for 802.11b/g/ n(HT20) Number of Channel : 11 channels for 802.11b/g/ n(HT20) Type of Modulation : DSSS with DBPSK/DQPSK/CCK for 802.11b; OFDM with BPSK/QPSK/16QAM/64QAM for 802.11g/n; Antenna installation : PCB antenna Antenna Gain : 2.72 dBi Power supply : Input: AC 120V 60Hz Hardware Version : N/A Software Version : N/A Report No.: PTC23060810101E-FC02 Page 6 of 7 4 RF Exposure Test Requirement : FCC Part 1.1307(b)(1) Evaluation Method : KDB 447498 D01 General RF Exposure Guidance v06 4.1 Requirements Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2 m normally can be maintained between the user and the device. 4.2 The procedures / limit (A) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm2) Averaging Time |E|2,|H|2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz ; *Plane-wave equivalent power density Report No.: PTC23060810101E-FC02 Page 7 of 7 4.3 MPE Calculation Method E (V/m) ＝ d G P   30 Power Density: Pd (W/m²) ＝ 377 2 E E ＝ Electric field (V/m) P ＝ Peak RF output power (W) G ＝ EUT Antenna numeric gain (numeric) d ＝ Separation distance between radiator and human body (m) The formula can be changed to Pd ＝ 2 377 30 d G P    θφ From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained 4.4 Test Result Mode Antenna Gain (numeric) Max. Peak Output Power (dBm) Tune up tolerance (dBm) Max Tune Up Power (mW) Power Density (mW/cm2) Limit of Power Density (mW/cm2) Result 2462 1.87 16.83 17±1 0.063096 0.234817 1 Pass ******THE END REPORT******

ReportNo.:RFI-LAB-RF-202306-FF14-1 QP030-E41 Page1of10 TestingReport CustomerName:NIE-TECHCo.,Ltd ProductName:ESP-WROOM-02D-ANT SampleModel:ESP-WROOM-02D-ANT ReferenceStandard:GB/T9410-2008;ANSI/IEEEStd149-1979 IssueDate:2023.6.14 Engineer:Date: Auditor:Date: Approver:Date: ReportNo.:RFI-LAB-RF-202306-FF14-1 QP030-E41 Page2of10 Version VersionNo.DateDescriptionFormulateApproval A02023.6.14Forthefirsttime,formulateZkrisEason Contents 1.GeneralInformation.........................................................................................................................3 1.1Generalinformationoftestinginstitutions...........................................................................3 1.2Testingprinciple...................................................................................................................3 1.3Testequipment......................................................................................................................4 1.4Testenvironment...................................................................................................................4 1.5Statement..............................................................................................................................4 2.SampleInformation.........................................................................................................................5 2.1Clientinformation.................................................................................................................5 2.2DescriptionofEUT(S)..........................................................................................................5 2.3EUTappearance....................................................................................................................6 2.4EUTsetupphotooffreespaceOTAtesting.........................................................................6 3.TestResults.....................................................................................................................................7 3.1Teststandard.........................................................................................................................7 3.2Testuncertainty.....................................................................................................................7 3.3Testdata................................................................................................................................8 3.3.1VSWRparameters.....................................................................................................8 3.3.2VSWRdata................................................................................................................8 3.3.3Typicalfreespaceefficiencyandgain......................................................................8 3.3.4Typicalfreespaceradiationpattern...........................................................................9 （Thefollowingisblank）..............................................................................................................10 ReportNo.:RFI-LAB-RF-202306-FF14-1 QP030-E41 Page3of10 1.GeneralInformation 1.1Generalinformationoftestinginstitutions Name ShenzhenRFI-LABCommunicationTechnologyCo.,Ltd. Address 10/FA,LingyunBld,LiufangRd,BaoanDistrict,SZ Tel 13682621346 E-mail [email protected] Equipment AlltheequipmentusedinthereportisfixedinZoneB,WestSideof1/F,Building1, TingweiIndustrialPark,No.6LiufangRoad,Bao'anDistrict,Shenzhen 1.2Testingprinciple ReportNo.:RFI-LAB-RF-202306-FF14-1 QP030-E41 Page4of10 1.3Testequipment EquipmentModelNo.SerialNo.Manufacturer Calibration date Next calibration date OTATest System RayZone-5000 RFI-LAB-RF -D00 GTS2023.3.142025.3.13 Network Analyzer E5071C RFI-LAB-RF -D01 KEYSIGHT2023.5.112024.5.10 Network Analyzer E5071C RFI-LAB-RF -C02 KEYSIGHT2023.5.112024.5.10 1.4Testenvironment Temperature 24.2°C Humidity 59%RH Pressure 100.15kPa 1.5Statement (1)Thetestresultsinthereportareonlyapplicabletothetestedsamplesandthetestedsamples workundertheenvironmentdescribedinthereport. (2)OnlyShenzhenRFI-LABCommunicationTechnologyCo.,Ltd.havetherighttomodifythe report,andthemodificationinformationshallbeannotatedintherevisionform. (3)Anyobjectiontothisreportshallberaisedwithin30daysafterformalconfirmationofthe report. (4)Thisreportisinvalidifthereisanyevidencethatthesampleinformationprovidedisfalsified. (5)Thereportisinvalidwithoutthesignatureoftheauditorandapprover. ReportNo.:RFI-LAB-RF-202306-FF14-1 QP030-E41 Page5of10 2.SampleInformation 2.1Clientinformation Name NIE-TECHCo.,Ltd Address / Contacts / Tel / E-mail / Manufacturer / 2.2DescriptionofEUT(S) ProductName ESP-WROOM-02D-ANT SampleModel ESP-WROOM-02D-ANT AntennaSize / SerialNo. / AntennaType PCBAntenna TestItem VSWR;Antennagain;Efficiency;Radiationpattern FrequencyRange 2400-2500MHz ReceivedDate 2023.6.12 TestDate 2023.6.13 Remark ThelengthoftheRFcableis90mm ReportNo.:RFI-LAB-RF-202306-FF14-1 QP030-E41 Page6of10 2.3EUTappearance 2.4EUTsetupphotooffreespaceOTAtesting Planform Frontview ReportNo.:RFI-LAB-RF-202306-FF14-1 QP030-E41 Page7of10 3.TestResults 3.1Teststandard NameParameterMethodStandardno. Mobile communication antenna Antennagain Genericspecification forantennasusedinthe mobilecommunications GB/T 9410-2008 Radiationpattern VSWR Antenna Radiationefficiency IEEEStandardTest ProceduresforAntennas ANSI/IEEEStd 149-1979 Gainanddirectivity 3.2Testuncertainty TheuncertaintywascalculatedonthebasisoftheGUMpublishedbyISO,usingthe inclusionfactorofK=2andthe95%confidenceleveltoexpresstheextended uncertainty. ItemUncertainty VSWR±0.3 Antennagain±0.72dB Radiationefficiency±0.72dB ReportNo.:RFI-LAB-RF-202306-FF14-1 QP030-E41 Page8of10 3.3Testdata 3.3.1VSWRparameters 3.3.2VSWRdata 3.3.3Typicalfreespaceefficiencyandgain Frequency/MHz 240024502500 VSWR 1.16091.53511.8900 Frequency/MHz 24002410242024302440245024602470248024902500 PeakGain/dBi 2.702.482.572.642.562.502.672.722.452.322.14 Efficiency/% 64.9164.1663.8264.0563.9763.7864.2564.…

Text truncated - open the document above for the full version.

Page 1 of 79 FCC TEST REPORT FCC ID: 2A9YKCWWTWSCENEWH Product : Smart Wi-Fi Room Controller Model Name : CWW-TW-SCENE-WH, Wiz33 Brand : N/A Report No. : PTC23060810101E-FC01 Prepared for Pure Edge Lighting LLC. 1718 W. Fullerton Ave ChicagoIllinois, 60614, United States Prepared by Precise Testing & Certification Co., Ltd. Building 1, No. 6, Tongxin Road, Dongcheng Street, Dongguan, Guangdong, China. Report No.: PTC23060810101E-FC01 Page 2 of 79 1 TEST RESULT CERTIFICATION Applicant’s name : Pure Edge Lighting LLC. Address : 1718 W. Fullerton Ave ChicagoIllinois, 60614, United States Manufacture's name : NIE-TECH Co., Ltd Address : Jinlian commercial center 9001, Jinxiu road No.2, Changan Town,Dongguan City, GuangDongProv., CHINA Product name : Smart Wi-Fi Room Controller Model name : CWW-TW-SCENE-WH, Wiz33 Standards : FCC CFR47 Part 15 Section 15.247 Test procedure : ANSI C63.10:2013 Test Date : Jun. 09, 2023 to Jun. 17, 2023 Date of Issue : Jun. 28, 2023 Test Result : Pass This device described above has been tested by PTC, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of PTC, this document may be altered or revised by PTC, personal only, and shall be noted in the revision of the document. Test Engineer: Simon Pu / Engineer Technical Manager: Ronnie Liu / Manager Report No.: PTC23060810101E-FC01 Page 3 of 79 Contents Page 1 TEST RESULT CERTIFICATION .............................................................................................................................. 2 2 TEST SUMMARY ......................................................................................................................................................... 5 3 GENERAL INFORMATION ........................................................................................................................................ 6 3.1 GENERAL DESCRIPTION OF E.U.T. .................................................................................................................... 6 3.2 CHANNEL LIST .................................................................................................................................................... 7 3.3 TEST SITE ........................................................................................................................................................... 8 4 EQUIPMENT DURING TEST ..................................................................................................................................... 9 4.1 EQUIPMENTS LIST............................................................................................................................................... 9 4.2 MEASUREMENT UNCERTAINTY ......................................................................................................................... 11 4.3 DESCRIPTION OF SUPPORT UNITS ................................................................................................................... 12 5 CONDUCTED EMISSION ......................................................................................................................................... 13 5.1 E.U.T. OPERATION ........................................................................................................................................... 13 5.2 EUT SETUP ...................................................................................................................................................... 13 5.3 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................................. 14 5.4 MEASUREMENT PROCEDURE ........................................................................................................................... 14 5.5 CONDUCTED EMISSION LIMIT ........................................................................................................................... 14 5.6 MEASUREMENT DESCRIPTION .......................................................................................................................... 14 5.7 CONDUCTED EMISSION TEST RESULT ............................................................................................................. 14 6 RADIATED SPURIOUS EMISSIONS ..................................................................................................................... 17 6.1 EUT OPERATION .............................................................................................................................................. 17 6.2 TEST SETUP ..................................................................................................................................................... 18 6.3 SPECTRUM ANALYZER SETUP .......................................................................................................................... 19 6.4 TEST PROCEDURE ..........…

Text truncated - open the document above for the full version.