2A9YKG259WRGBTWLED LAMP

Tr u Color ™ RGB Tu na ble White wit h Tr u Color ™ Lam ps & Controls Collection Architectural Lighting - TruColor ™ RGBT W A Collection of Over 60 Architectural Lighting Fixtures PureEdge Lighting is the Original Designer of the 5/8” Recessed Plaster -In Drywall Lighting System For the full collection and more, visit www.pureedgelighting.com Bul bs also work with select Pure Smart ™ Wall Controllers What is TruColor ™ ? Pure Smart TruColor ™ technology uses five-channels of tunable LEDs, composed of RGBTW r ed, blue, green, warm white, and cool white. With our proprietary color mixing we produce one of the widest, most accurate spectrum available from 1500K-6500K, giving our customers access to the warm glow of the sunset (1500K-2400K golden hour) to the white light of the mid-day sun (5700K) and beyond. TruColor LED’s achieve an average CRI-Color Rendering Index of 93+ and a Duv of +-.004 in relation to the blackbody curve at any point on the spectrum of tunable white CCT. Verge Cor ner Veil Reveal Wall WashReveal Cove TruCurve ™ TruLine Cirrus Wall Wash Flex Neon Nimbus Up/Down LED Strip Cirrus Wall GrazerCirrus Ceiling/ Suspension A19 LED LAMP A19-E26-9W-RGBTW & A21-E26-13W-RGBTW BR30 LED LAMP BR30-E26-12W-RGBTW B11 LED LAMP B11-E12-4W-RGBTW G25 LED LAMP G25-E26-9W-RGBTW MR16 LED LAMP MR16-GU5.3-4W-XWF-RGBTW This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Pure Edge Lighting LLC. Add: 1718 W. Fullerton Ave, Chicago, Illinois 60614 United States Tel: (224) 735-5497 Email: [email protected] Attestation Letter Date: 2023-09-15 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam: Our product LED LAMP, model: G25‐E26‐9W‐RGBTW, FCC ID:2A9YKG259WRGBTW,for marketing purpose, this product only supports 2.4G WiFi (2412-2462MHz,802.11b/g/n ht20 modes, 2422-2452MHz, 802.11n ht40).The other functions, bands and modes was disabled to use by manufacturer in the software, the end user has no capability to activate it. Sincerely, Signature: Contact Person: Blake Matthew Title: National Sales Manager

CFR 47 §2.911(d)(5)(i)(ii) Attestation Letter Pure Edge Lighting LLC. Add: 1718 W. Fullerton Ave, Chicago, Illinois 60614 United States Tel: (224) 735-5497 Email: [email protected] Attestation Letter Date: 2023/9/15 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i)(ii) Filing FCC ID:2A9YKG259WRGBTW, Signature: Contact Person: Blake Matthew Pure Edge Lighting LLC. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Pure Edge Lighting LLC. (“the applicant”) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Title: National Sales Manager

CFR 47 §2.911(d)(7) U.S Agent U.S. AGENT LETTER OF ATTESTATION Date: 2023/9/15 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID:2A9YKG259WRGBTW, Pure Edge Lighting LLC. (“the Applicant”) certifies that, as of the date of the filing of the application, Pure Edge Lighting LLC. (U.S. agent). is our designated U.S. agent for service of process for the above referenced FCC ID. Pure Edge Lighting LLC. (“the Applicant”)accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Pure Edge Lighting LLC. (U.S. agent) accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: Pure Edge Lighting LLC. Address: 1718 W. Fullerton Ave, Chicago, Illinois 60614 United States FRN: 0032171019 Email: [email protected] Contact person: Blake Matthew Tel: (224) 735-5497 Sincerely, Applicant Name Pure Edge Lighting LLC. Applicant Printed Name Blake Matthew Applicant Signature

QA-FR-170-B Pure Edge Lighting LLC. Add: 1718 W. Fullerton Ave, Chicago, Illinois 60614 United States Tel: (224) 735-5497 Email: [email protected] FCC Authorization Date: 2023/9/15 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, We , Pure Edge Lighting LLC., Hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Contact Person: Blake Matthew Title: National Sales Manager

QA-FR-171-A Pure Edge Lighting LLC. Add: 1718 W. Fullerton Ave, Chicago, Illinois 60614 United States Tel: (224) 735-5497 Email: [email protected] FCC Confidential Authorization Date: 2023-09-15 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification o f FCC ID:2A9YKG259WRGBTW In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, (Pure Edge Lighting LLC.) hereby requests long-term confidential treatment of information accompanying this application as outlined below: Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature: Printed name: Blake Matthew Title: National Sales Manager

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230846382-EXP Page 1 of 2 EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS EUT China Certification ICT Co., Ltd (Dongguan) Report No.: CR230846382-EXP Page 2 of 2

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230846382-INP Page 1 of 8 EXHIBIT C - EUT INTERNAL PHOTOGRAPHS Uncover China Certification ICT Co., Ltd (Dongguan) Report No.: CR230846382-INP Page 2 of 8 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230846382-INP Page 3 of 8 Chip China Certification ICT Co., Ltd (Dongguan) Report No.: CR230846382-INP Page 4 of 8 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230846382-INP Page 5 of 8 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230846382-INP Page 6 of 8 Chip Antenna China Certification ICT Co., Ltd (Dongguan) Report No.: CR230846382-INP Page 7 of 8 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230846382-INP Page 8 of 8 Chip

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230846382-00A Page 65 of 67 5. RF EXPOSURE EVALUATION 5.1 MPE- Maximum Permissible Exposure 5.1.1 Applicable Standard According to subpart §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f²) 30 30–300 27.5 0.073 0.2 30 300–1500 / / f/1500 30 1500–100,000 / / 1.0 30 f = frequency in MHz; * = Plane-wave equivalent power density; According to §1.1310 and §2.1091 RF exposure is calculated. Calculation formula: Prediction of power density at the distance of the applicable MPE limit S = PG/4R² = power density (in appropriate units, e.g. mW/cm 2 ); P = power input to the antenna (in appropriate units, e.g., mW); G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain; R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); Operation Modes Frequency (MHz) Antenna Gain Conducted output power including Tune-up Tolerance Evaluation Distance Power Density MPE Limit (dBi) (numeric)(dBm) (mW) (cm) (mW/cm 2 )(mW/cm 2 ) 2.4G WLAN 2412-2462 3.8 2.4 22.5 177.83 20.00 0.0849 1 Note: The Maximum Conducted Power including Tune-up Tolerance was declared by manufacturer. Result: The device compliant the MPE-Based Exemption at 20cm distances.

嘉兴佳利电子有限公司http://www.glead.com.cn阿里巴巴http://zydq.en.alibaba.com JIAXINGGLEADELECTRONICSCO.,LTD -1- 产品技术规格书 SPECIFICATION 中国浙江省嘉兴市经济开发区正原路66号 No.66ZhengyuanRoad,EconomicDevelopmentZone,Jiaxing,Zhejiang,China TEL：0086-573-83651818FAX：0086-573-83651858 拟制 Preparedby ：审核 Checkedby ：批准 Approvedby ： 送样日期 FormedOn 产品版本 DocumentVersion (V1.3) 产品型号PARTNO：LA31H2450-A35 客户料号CUSTOMERPARTNO： 客户确认CUSTOMERAPPROVEDBY： 确认日期APPROVEDDATE： 嘉兴佳利电子有限公司http://www.glead.com.cn阿里巴巴http://zydq.en.alibaba.com JIAXINGGLEADELECTRONICSCO.,LTD -2- 目录 Tableofcontents 规格书版本更改记录Versionrejiggertrackrecord..............................3 1.概述Introduction..................................................................4 2.型号PartNumber...............................................................4 3.外型尺寸及测试板焊盘尺寸Dimensions.....................4～5 4.测试电路和匹配电路EvaluationBoardandMatchingCircuits............5 5.电气性能ElectricalCharacteristics..........................................6 6.特性曲线Characteristiccurve...................................................6 7.方向图RadiationPattern...................................................7～8 8.可靠性试验后允许误差PostDependabilityTolerance...............9 9.可靠性试验DependabilityTest..........................................9～10 10.回流焊温度ReflowSolderingStandardCondition.....................10 11.包装尺寸PackagingandDimensions....................................11 嘉兴佳利电子有限公司http://www.glead.com.cn阿里巴巴http://zydq.en.alibaba.com JIAXINGGLEADELECTRONICSCO.,LTD -3- 产品规格书版本更改记录 Versionrejiggertrackrecord 版本号 Version 更改记录Rejigger 拟制 Prepared 批准 Approve 日期 Date V1.0首次发行蔡壮陆德龙2015.12.25 V1.1更改产品尺寸公差值罗昌桅卢冠宇2017.05.24 V1.2 修正可靠性试验说明内容8.1~8.4潘枫卢冠宇2017.11.07 V1.3 修正可靠性项目9.4内容 更新回流焊温度曲线图表 新增11.1产品包装摆放方向示意图 修正11.3产品储存条件为MSL:1 潘枫卢冠宇2018.07.31 备注： 1、更改产品电性能指标时，版本号需更换（V1.0换为V2.0、V3.0......）； 2、更改产品测试方法（包括可靠性测试条件），或更改使用条件时，当前版本号加系列（V1.0 换为V1.1、V1.2......）。 嘉兴佳利电子有限公司http://www.glead.com.cn阿里巴巴http://zydq.en.alibaba.com JIAXINGGLEADELECTRONICSCO.,LTD -4- 产品尺寸/Size：3.2×1.6×1.2 1.概述 INTRODUCTION " 佳利 " 微波多层陶瓷天线 LA 系列产品设计用于 WLAN 、 WiFi 、蓝牙、 PHS ，手机 多频天线 ,FM 等小体积 SMD 片式设计。 "GLEAD"MicrowaveMulti-LayerCeramicAntennaLAseriesaredesignedtobeused inWLAN 、 WiFi 、 Bluetooth 、 PHS 、 Multiple-bandMobilephoneantenna,FM,etcand compactsizeSMDchipdesign. 2.型号 PartNumber LA31H2450-A35 3.外型尺寸 Dimensions （ Unit ： mm ） 天线频率/AntennaFrequency:2450MHz 产品设计结构H型/ViaDesignSeries 多层结构天线/Multi-layerAntenna 产品名称，编号A35/ProductName:A35 嘉兴佳利电子有限公司http://www.glead.com.cn阿里巴巴http://zydq.en.alibaba.com JIAXING GLEAD ELECTRONICS CO., LTD - 5 - 4. 测试电路和匹配电路Evaluation Board and Matching Circuits 5. 电气性能Electrical Characteristics No. Item （项目） Specifications （特性） 5.1 (带匹配电路测试)After Matching 2450 MHz 5.2Band Width通带宽度100MHz typ. 5.3Peak Gain峰值增益3.8dBi 5.4V.S.W.R驻波比≤2.0 5.5 Polarization极化方式 Linear线性 5.6 Azimuth Beam width方位角 Omni-directional全向 5.7 Impedance阻抗 50 Ω 6.2n 1.8n Central Frequency 中心频率(No matching) 2412-2462MHz 嘉兴佳利电子有限公司http://www.glead.com.cn阿里巴巴http://zydq.en.alibaba.com JIAXINGGLEADELECTRONICSCO.,LTD -6- 6.特性曲线 Characteristiccurve 7. 方向图 RadiationPattern coordinates： 嘉兴佳利电子有限公司http://www.glead.com.cn阿里巴巴http://zydq.en.alibaba.com JIAXINGGLEADELECTRONICSCO.,LTD -7- X-ZPlane Y-ZPlane X-YPlane 嘉兴佳利电子有限公司http://www.glead.com.cn阿里巴巴http://zydq.en.alibaba.com JIAXING GLEAD ELECTRONICS CO., LTD - 8 - 3DRadiation Pattern Frequency (MHz) 240024502500 Avg. Gain (dBi) -0.23-0.36-0.51 Peck Gain (dBi) 3.78 3.8 3.7 Efficiency (%) 7071.269 嘉兴佳利电子有限公司http://www.glead.com.cn阿里巴巴http://zydq.en.alibaba.com JIAXINGGLEADELECTRONICSCO.,LTD -9- 8可靠性试验后允许误差PostDependabilityTolerance 经可靠性试验后允许比起始读数偏差见下表 PostDependabilityTolerance(Refertothetable) 9可靠性试验DependabilityTest 基准条件：温度范围Temperaturerange25±5°C 相对湿度范围RelativeHumidityrange55~75%RH 工作温度OperatingTemperaturerange-40°C~+125°C 9.1耐振动VibrationResist 在振动频率为10~55Hz振幅为1.5mm沿X.Y.Z方向各振动2小时后测试符合表8.1~8.4规定。 Thedeviceshouldsatisfytheelectricalcharacteristicsspecifiedinparagraph8.1~8.4afterappliedto thevibrationof10to55Hzwithamplitudeof1.5mmfor2hourseachinX,YandZdirections. 9.2耐跌落冲击DropShock 在100cm高度处按X，Y，Z三个面分别自由跌落在木制地板上共3次后测试符合表8.1~8.4规 定。 Thedeviceshouldsatisfytheelectricalcharacteristicsspecifiedinparagraph8.1~8.4afterdropping ontothehardwoodenboardfromtheheightof100cmfor3timeseachfacetofthe3dimensionsofthe device. 9.3耐焊接热SolderHeatProof 能承受经120~150°C的温度预热120秒后，在255°C+10°C的焊锡浸5±0.5秒，或300°C-10°C的 电烙铁焊接3±0.5秒，焊接面无损伤。 Thedeviceshouldbesatisfiedafterpreheatingat120°C~150°Cfor120secondsanddippingin solderingSnat255°C+10°Cfor5±0.5seconds，orelectriciron300°C-10°Cfor3±0.5seconds， withoutdamnify. 9.4推力试验AdhesiveStrengthofTermination 在产品电极端子上或表面上可承受5N(≦0603)；10N(>0603)水平推力10±1秒而无明显外观损坏 与电极移位。 Thedevicehavenoremarkabledamageorremovaloftheterminationafterhorizontalforceof 5N(≦0603)；10N(>0603)with10±1seconds. No.Item（项目） PostDependabilityTolerance (可靠性试验后允许附加误差) 8.1CentralFrequency中心频率±5MHz 8.2BandWidth通带宽度±5MHz 8.3Gain增益±0.1dBi 8.4V.S.W.R(inBW)驻波比±0.1 嘉兴佳利电子有限公司http://www.glead.com.cn阿里巴巴http://zydq.en.alibaba.com JIAXINGGLEADELECTRONICSCO.,LTD -10- 9.5耐弯曲试验BendingResistTest 将产品按图焊在1.6±0.2mm的PCB板中间，由箭头方向施 力：1mm/S，弯曲距离：1.5mm，保持5±1S，产品金属层无脱落。 WeldtheproducttothecenterpartofthePCBwiththethickness 1.6±0.2mmastheillustrationshows,andkeepexertingforce arrow-wardonitatspeedof:1mm/S,andholdfor5±1Satthe positionof1.5mmbendingdistance,sofar,anypeelingoffofthe productmetalcoatingshouldnotbedetected. 9.6耐湿热特性MoistureProof 在温度为60±2°C，相对湿度90~95%的恒温湿箱中放置96小时，在常温中恢复1~2小时后测 试，符合表8.1~8.4规定。 Thedeviceshouldsatisfytheelectricalcharacteristicsspecifiedinparagraph8.1~8.4afterexposedto thetemperature60±2°Candtherelativehumidity90~95%RHfor96hoursand1~2hoursrecoverytime undernormalcondition. 9.7高温特性HighTemperatureEndurance 在温度为125±5°C的恒温箱中放置96±2小时，在常温中恢复1~2小时后测试。符合表8.1~8.4 规定。 Thedeviceshouldsatisfytheelectricalcharacteristicsspecifiedinparagraph8.1~8.4afterexposedto temperature125±5°Cfor96±2hoursand1~2hoursrecoverytimeundernormaltemperature. 9.8低温特性LowTemperatureEndurance 在温度为-40°C±5°C低温箱中放置96±2小时后恢复1~2小时测试符合表8.1~8.4规定。 Thedeviceshouldalsosatisfytheelectricalcharacteri…

Text truncated - open the document above for the full version.

TEST REPORT Applicant: Pure Edge Lighting LLC. Address: 1718 W. Fullerton Ave, Chicago, IL, 60614 FCC ID: 2A9YKG259WRGBTW Product Name: LED LAMP Standard(s): 47 CFR Part 15, Subpart C(15.247) ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 The above device has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR230846382-00A Date Of Issue: 2023/9/20 Reviewed By: Julie Tan Title: RF Engineer Approved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230846382-00A Page 2 of 67 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR230846382-00A Page 3 of 67 CONTENTS DOCUMENT REVISION HISTORY .......................................................................................... 5 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 8 1.2.1 EUT Operation Condition: ............................................................................................................................. 8 1.2.2 Support Equipment List and Details .............................................................................................................. 8 1.2.3 Support Cable List and Details ...................................................................................................................... 8 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 9 1.3 MEASUREMENT UNCERTAINTY ........................................................................................................ 10 2. SUMMARY OF TEST RESULTS .......................................................................................... 11 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 12 3.1 AC LINE CONDUCTED EMISSIONS .................................................................................................... 12 3.1.1 Applicable Standard ..................................................................................................................................... 12 3.1.2 EUT Setup.................................................................................................................................................... 13 3.1.3 EMI Test Receiver Setup ............................................................................................................................. 13 3.1.4 Test Procedure ............................................................................................................................................. 14 3.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 14 3.2 RADIATION SPURIOUS EMISSIONS .................................................................................................... 15 3.2.1 Applicable Standard ..................................................................................................................................... 15 3.2.2 EUT Setup.................................................................................................................................................... 15 3.2.3 EMI Test Receiver & Spectrum Analyzer Setup ......................................................................................... 16 3.2.4 Test Procedure ............................................................................................................................................. 16 3.2.5 Corrected Amplitude & Margin Calculation ................................................................................................ 16 3.3 MINIMUM 6 DB EMISSION BANDWIDTH ........................................................................................... 17 3.3.1 Applicable Standard ..................................................................................................................................... 17 3.3.2 EUT Setup.................................................................................................................................................... 17 3.3.3…

Text truncated - open the document above for the full version.

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230846382-00A-TSP Page 1 of 2 EXHIBIT D - TEST SETUP PHOTOGRAPHS Conducted Emissions Front View Conducted Emissions Side View China Certification ICT Co., Ltd (Dongguan) Report No.: CR230846382-00A-TSP Page 2 of 2 Radiated Emission Below 1GHz View Radiated Emission Above 1GHz View