2AAAL-T041-315-FR01RF Wireless Remote Controller for LED controller

User manual There are Two keys on the product,and each key stand for a sole code with the carrier of 315MHz. For example: If you press k1 button,the transmitter will transmit a serial code with the carrier of 315MHz,and it is sole，we called it channel 1.and at the same time,the receiver which have the same code with the transmitter,received the code ,it will take some action,just for example,control the relay,led,beep,and so on. K2 stand for channel 2,and has the same usage with K1 which describe above. FCC Statement： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFEREN CE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

Dalian Seaside Door Controlling System Co. Ltd. SAMPLE LETTER OF AUTHORIZATION Type the following letter on your company letterhead: DATE: 2015-03-05 To whom it may concern: We the undersigned, hereby authorize < Shenzhen Huatongwei International Inspection Co., LTD.> to act as our authorized agent on our behalf in all manners relating to application for FCC equipment authorization, including signing of all documents relating to these matters. Any individual within this entity may act on our behalf. Any and all acts carried out by < Shenzhen Huatongwei International Inspection Co., LTD..> on our behalf shall have the same effect as acts of our own. This authorization is valid until further written notice from < Dalian Seaside Door Controlling System Co. Ltd.>. Sincerely, (Name and Title) :Wei Zhao/ Technical Manager 2015-03-05

Dalian Seaside Door Controlling System Co. Ltd. 2015-03-05 FO023_FCC Sample Confidentiality Form, Confidentiality form.docx FO023 – FCC SAMPLE CONFIDENTIALITY FORM Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with Sections 0.457 and 0.459 pertaining to confidential material. Dalian Seaside Door Controlling System Co. Ltd.would like the following documents regarding this submission for FCC ID: 2AAAL-T041-315-FR01to be kept confidential. 1. operation .pdf. 2. block diagram .pdf 3. sch .pdf The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, Wei Zhao / Technical Manager 2015-03-05

Report No : TRE14120180 Page 18 of 21 6. External and Internal Photos of the EUT External Photos Report No : TRE14120180 Page 19 of 21

Report No : TRE14120180 Page 20 of 21 Internal Photos Report No : TRE14120180 Page 21 of 21 .......................End of Report.........................

TEST REPORT Report Reference No. .................... : TRE14120180 R/C..........:10258 FCC ID ............................................. : 2AAAL-T041-315-FR01 Applicant’s name ........................... : Dalian Seaside Door Controlling System Co. Ltd. Address ............................................. : No.23-7,Yaobei Road,Ganjingzi District,Dalian,Liaoning,China. Manufacturer......................................: Dalian Seaside Door Controlling System Co. Ltd. Address...............................................: No.23-7,Yaobei Road,Ganjingzi District,Dalian,Liaoning,China. Test item description .................... : Remote Control Trade Mark ....................................... : / Model/Type reference ....................... : T041-315-FR01 Listed Model(s) ................................. : / Standard ......................................... : FCC CFR Title 47 Part 15 Subpart C Section 15.231 Date of receipt of test sample...........: Dec 31, 2014 Date of testing..............................: Dec 31, 2014- Mar 13, 2015 Date of issue.................................: Mar 13, 2015 Result .................. ........................: PASS Compiled by ( position+printed name+signature) .. : File administrators Yingchun Shan Supervised by ( position+printed name+signature) .. : Project Engineer Yingchun Shan Approved by ( position+printed name+signature) .. : RF Manager Hans Hu Testing Laboratory Name ............. : Shenzhen Huatongwei International Inspection Co., Ltd Address ............................................. : Keji Nan No.12 Road, Hi-tech Park, Shenzhen, China Shenzhen Huatongwei International Inspection Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Huatongwei International Inspection Co., Ltd is acknowledged as copyright owner and source of the material. Shenzhen Huatongwei International Inspection Co., Ltd takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Report No : TRE14120180 Page 2 of 21 Contents 1. TEST STANDARDS AND TEST DESCRIPTION 3 1.1. Test Standards 3 1.2. Test Description 3 2. SUMMARY 4 2.1. Client Information 4 2.2. Product Description 4 2.3. EUT operation mode 4 2.4. EUT configuration 4 2.5. Modifications 4 3. TEST ENVIRONMENT 5 3.1. Address of the test laboratory 5 3.2. Test Facility 5 3.3. Environmental conditions 6 3.4. Statement of the measurement uncertainty 6 3.5. Equipments Used during the Test 7 4. TEST CONDITIONS AND RESULTS 8 4.1. Antenna requirement 8 4.2. AC Power Conducted Emission(Not Applicable) 9 4.3. Radiated Emission 9 4.4. Occpied Bandwidth 15 4.5. Deactivation Time 16 5. TEST SETUP PHOTOS OF THE EUT 17 6. EXTERNAL AND INTERNAL PHOTOS OF THE EUT 18 Report No : TRE14120180 Page 3 of 21 1. TEST STANDARDS AND TEST DESCRIPTION 1.1. Test Standards The tests were performed according to following standards: FCC Rules Part 15.231: Periodic operation in the band 40.66–40.70 MHz and above 70 MHz. ANSI C63.10-2009: American National Standard for Testing Unlicensed Wireless Devices. 1.2. Test Description Test Item Section in CFR 47 Result Conducted Emissions 15.207 N/A Unintentional Radiated Emissions 15.109 PASS Radiated & Spurious Emissions 15.205/15.209(a)/15.231(b/15.35(c)PASS Deactivation Time 15.231(a)(1) PASS Duty Cycle 15.231 PASS Occpied Bandwidth 15.231(c) PASS Remark: The measurement uncertainty is not included in the test result. Report No : TRE14120180 Page 4 of 21 2. SUMMARY 2.1. Client Information Applicant: Dalian Seaside Door Controlling System Co. Ltd. Address: No.23-7,Yaobei Road,Ganjingzi District,Dalian,Liaoning,China. Manufacturer: Dalian Seaside Door Controlling System Co. Ltd. Address: No.23-7,Yaobei Road,Ganjingzi District,Dalian,Liaoning,China. 2.2. Product Description Name of EUT Remote Control Trade Mark: / Model No.: T041-315-FR01 Listed Model(s): / Power supply: DC12.0V from battery Adapter information: / Operation frequency: 315.0MHz Channel number: 1 Antenna type: Intergral Antenna Antenna gain: 0dBi 2.3. EUT operation mode The EUT has been tested under typical operating condition. The Applicant provides software to control the EUT for staying in continous transmitting mode for testing. 2.4. EUT configuration The following peripheral devices and interface cables were connected during the measurement: ● - supplied by the manufacturer ○ - supplied by the lab ○ Power Cable Length (m) : / Shield : / Detachable : / ○ Multimeter Manufacturer : / Model No. : / 2.5. Modifications No modifications were implemented to meet testing criteria. Report No : TRE14120180 Page 5 of 21 3. TEST ENVIRONMENT 3.1. Address of the test laboratory Shenzhen Huatongwei International Inspection Co., Ltd. Keji Nan No.12 Road, Hi-tech Park, Shenzhen, China Phone: 86-755-26748019 Fax: 86-755-26748089 3.2. Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L1225 Shenzhen Huatongwei International Inspection Co., Ltd. has been assessed and proved to be in compliance with CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC 17025: 2005 General Requirements) for the Competence of Testing and Calibration Laboratories, Date of Registration: February 28, 2015. Valid time is until February 27, 2018. A2LA-Lab Cert. No. 2243.01 Shenzhen Huatongwei International Inspection Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to be in compliance with ISO/IEC 17025: 2005 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. Valid time is until Sept 30, 2015. FCC-Registration No.: 662850 Shenzhen Huatongwei International Inspection Co., Ltd. EMC Laboratory h…

Text truncated - open the document above for the full version.

Report No : TRE14120180 Page 17 of 21 5. Test Setup Photos of the EUT