2AAC4-KS056996Magnetic Wireless Power Bank

KS056996 KS056996 KS056996A KS056996 KS056996A ISED Canada Statement: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Radiation Exposure: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Déclaration d'ISED Canada: Cet appareil contient des émetteurs/récepteurs exemptés de licence qui sont conformes aux RSS exemptés de licence d’innovation, sciences et développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes: (1) ce dispositif ne peut pas causer d’interférence. (2) ce dispositif doit accepter toute interférence, y compris l’interférence qui peut causer un fonctionnement indésirable du dispositif. Exposition aux radiations: Cet équipement est conforme à la réglementation canadienne sur les radiations. limites d'exposition établies pour un environnement non contrôlé. Déclaration d'exposition aux radiations IC L'appareil a été évalué pour répondre aux exigences générales d'exposition aux RF. L'appareil peut être utilisé sans restriction dans des conditions d'exposition portables.

Rev 1/26/2023 Case-Mate, Inc. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2026/7/20 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2AAC4-KS056996 Applicant FRN: 0022711741 [Case-Mate, Inc.] certifies that, as of the date of the filing of the application, [Case-Mate, Inc.] is our designated U.S. agent for service of process for the above referenced FCC ID. [Case-Mate, Inc.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. [Case-Mate, Inc.] accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: Case-Mate, Inc. FRN: 0022711741 Contact Name: Saumil A Mody Address: 990 Hammond Dr Ste. 700, Atlanta, GA 30328-6176, United States Telephone No: 765-409-3883 Email: [email protected] Sincerely, [Case-Mate, Inc.] [Case-Mate, Inc.] [Saumil A Mody] [Saumil A Mody]

(Case-Mate Inc.) (2026/7/20) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID: 2AAC4-KS056996) [Case-Mate Inc.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, (Applicant signature) (Applicant printed name) Saumil A Mody (Case-Mate Inc.) (2026/7/20) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCC ID: 2AAC4-KS056996) [Case-Mate Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Saumil A Mody

Case-Mate Inc. 2026/7/30 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen BCTC Technology Co., Ltd. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: Client’s name / title : Saumil A Mody / Manager Contact information / address: 990 Hammond Dr., Ste. 700, Atlanta, Georgia 30328-6176, United States

Case-Mate Inc. 2026/7/20 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: Magnetic Wireless Power Bank Trademark: N/A MODEL: KS056996, KS057066, CM060104, CM060106, CM060108, CMMSBTRY, KN060960, KN060962, KN060964, LSFMSBTRY, PP060764 To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - Block Diagram - Schematics - Operational Description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Client’s signature: Client’s name / title : Saumil A Mody / Manager Contact information / address: 990 Hammond Dr., Ste. 700, Atlanta, Georgia 30328-6176, United States

Case-Mate, Inc. Model Difference 2026/7/20 EUT NAME: Magnetic Wireless Power Bank Trademark: N/A MODEL: KS056996, KS057066, CM060104, CM060106, CM060108, CMMSBTRY, KN060960, KN060962, KN060964, LSFMSBTRY, PP060764 FCC ID: 2AAC4-KS056996 All the models are the same circuit and RF module, except model names and the color. Model Color KS056996 KS057066 CM060104 CM060106 CM060108 CMMSBTRY KN060960 KN060962 KN060964 LSFMSBTRY PP060764 Regards Sincerely Client’s signature: Client’s name / title : Saumil A Mody / Vice President of Engineering & Sourcing Contact information / address: 990 Hammond Dr., Ste. 700, Atlanta, Georgia 30328-6176, United States

Report No.: BCTC2605550334E Page 1 of 8 External Photos Report No.: BCTC2605550334E Page 2 of 8 Report No.: BCTC2605550334E Page 3 of 8 Report No.: BCTC2605550334E Page 4 of 8 Report No.: BCTC2605550334E Page 5 of 8

CAUTION: Risk of Fire and Burns. Do Not Open, Crush, Heat Above 45°C or Incinerate. Follow Manufacturer’s Instructions. AVERTISSEMENT: Risque d'incendie et de brûlures. Ne pas ouvrir, écraser, chauffer à une températuresupérieure à la 45°C ou incinérer. Suivre les instructions du fabricant. Batch20260629 PP060764 Product Name Built-in Battery Chemistry type: Li-ion Type-C Output: DC 5V/3A WirelessOutput: 15W max FCC ID: 2AAC4-KS056996 Model: PP060764 Magnetic Wireless Power Bank 3.75V, 5000mAh, 18.75Wh Type-C Input: DC 5V/2A(2.7A max) Rated Capacity: 2500mAh(5V) Compatible 10w/7.5w/5w IC: 12369A-KS056996A HVIN: PP060764 KS056996 Batch20260629 Product Name Built-in Battery Chemistry type: Li-ion Type-C Output: DC 5V/3A WirelessOutput: 15W max FCC ID: 2AAC4-KS056996 Model: KS056996 Magnetic Wireless Power Bank 3.75V, 5000mAh, 18.75Wh Type-C Input: DC 5V/2A(2.7A max) Rated Capacity: 2500mAh(5V) Compatible 10w/7.5w/5w IC: 12369A-KS056996A HVIN: KS056996A CAUTION: Risk of Fire and Burns. Do Not Open, Crush, Heat Above 45°C or Incinerate. Follow Manufacturer’s Instructions. AVERTISSEMENT: Risque d'incendie et de brûlures. Ne pas ouvrir, écraser, chauffer à une températuresupérieure à la 45°C ou incinérer. Suivre les instructions du fabricant.

Report No.: BCTC2605550334E Page 6 of 8 Internal Photos Antenna Report No.: BCTC2605550334E Page 7 of 8 Report No.: BCTC2605550334E Page 8 of 8

No.：BCTC/KJ-RF-ICT-001 Page 1 of 17 Edition：B.1 TEST REPORT Shenzhen BCTC Technology Co., Ltd. Report No.: BCTC2605233123-2E Applicant: Case-Mate Inc. Product Name: Magnetic Wireless Power Bank Test Model: KS056996 Tested Date: 2026-06-12 to 2026-07-14 Issued Date: 2026-07-14 Report No.: BCTC2605233123E No.：BCTC/KJ-RF-ICT-001 Page 2 of 17 Edition：B.1 FCC ID: 2AAC4-KS056996 The test report is effective only with both signature and specialized stamp.This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Technology Co., Ltd, this report can’t be reproduced except in full.The tested sample(s) and the sample information are provided by the client. Product Name: Magnetic Wireless Power Bank Trademark: N/A Model/Type reference: KS056996 KS057066, CM060104, CM060106, CM060108, CMMSBTRY, KN060960, KN060962, KN060964, LSFMSBTRY, PP060764 Prepared For: Case-Mate Inc. Address: 990 Hammond Dr., Ste. 700, Atlanta, GA 30328-6176, USA Manufacturer: Shunhetai (Shenzhen) Technology Co., Ltd. Address: 201-302, 1th Building, Jiayu Environmental Protection Industrial Park, No. 162, Shajiang Road, Songgang Street, Baoan District, Shenzhen, Guangdong, 518105, CN. Prepared By: Shenzhen BCTC Technology Co., Ltd. Address: Room 101M, Unit 1, Building1, Pengyuan, No.18, Lilang Road, Shanglilang, Nanwan Subdistrict, Longgang District, Shenzhen, Guangdong, China. Sample Received Date: 2026-06-12 Sample tested Date: 2026-06-12 to 2026-07-14 Report No.: BCTC2605233123-2E Test Standards: FCC CFR 47 part1, 1.1307(b), 1.1310 KDB 680106 D01 Wireless Power Transfer v04 Test Results: PASS Prepared by : Reviewer by : Approved by: Louis Zeng /Editor Mike Zheng / Supervisor Sewen Guo/Manager Report No.: BCTC2605233123E No.：BCTC/KJ-RF-ICT-001 Page 3 of 17 Edition：B.1 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 4 2. Product Information ............................................................................................... 5 2.1 Product Information ............................................................................................... 5 2.2 Test Setup Configuration ...................................................................................... 5 2.3 Support Equipment ............................................................................................... 6 2.4 Test Mode ............................................................................................................. 6 3. Test Facility And Test Instrument Used ................................................................. 7 3.1 Test Facility ........................................................................................................... 7 3.2 Test Instrument Used ............................................................................................ 7 4. Method Of Measurement ....................................................................................... 8 4.1 Applicable Standard .............................................................................................. 8 4.2 Block Diagram Of Test Setup ................................................................................ 8 4.3 Limit ...................................................................................................................... 9 4.4 Test procedure ...................................................................................................... 9 4.5 Equipment Approval Considerations ................................................................... 10 4.6 E and H field Strength ......................................................................................... 11 5. Photographs Of Test Set-Up ............................................................................... 16 (Note: N/A Means Not Applicable) Report No.: BCTC2605233123E No.：BCTC/KJ-RF-ICT-001 Page 4 of 17 Edition：B.1 1. Version Report No. Issue Date Description Approved BCTC2605233123-2E 2026-07-14 Original Valid Report No.: BCTC2605233123E No.：BCTC/KJ-RF-ICT-001 Page 5 of 17 Edition：B.1 2. Product Information 2.1 Product Information Model/Type reference: KS056996 KS057066, CM060104, CM060106, CM060108, CMMSBTRY, KN060960, KN060962, KN060964, LSFMSBTRY, PP060764 Model differences: All the model are the same circuit and RF module, except model names and appearance of the color., the test model is KS056996. Hardware Version: N/A Software Version: N/A Type of Modulation: ASK Operation Frequency: 5W/10W/15W: 115-205kHz 7.5W: 360-365kHz Antenna installation: Loop coil antenna Ratings: Type C Input: DC 5V/2A(2.7A max) Type C Output: DC 5V/3A, 15W Max Wireless Output: 15W Max. compatible 10W/7.5W/5W Battery: DC 3.75V 2.2 Test Setup Configuration See test photographs attached in EUT TEST SETUP PHOTOGRAPHS for the actual connections between Product and support equipment. Test Mode 1 Test Mode 2-4 E-2 Adapter E-1 EUT AC Plug C-1 E-3 Module EUT E-3 Module Report No.: BCTC2605233123E No.：BCTC/KJ-RF-ICT-001 Page 6 of 17 Edition：B.1 2.3 Support Equipment No. Cable Type Quantity Provider Length (m) Shielded Note 1 DC Cable -- --- 0.8m --- C-1 2 -- -- --- --- --- --- No. Device Type Brand Model Series No. Note E-1 Magnetic Wireless Power Bank N/A KS056996 N/A EUT E-2 AC Adapter TEKA-UCA2 0US / TEKA Auxiliary E-3 Intelligent wireless charging full function test module V3.1.1 / EESON Auxiliary Notes: 1. All the equipment/cables were placed in the worst-case configuration to maximize the emission during the test. 2. Grounding was established in accordance with the manufacturer’s requirements and conditions for the intended use. 2.4 Test Mode Test Mode 1 Charging+5W(115-205KHz) Test Mode 2 5W(115-205KHz) Test Mode 3 7.5W(360-365kHz) Test Mode 4 15W(115-205kHz) Report No.: BCTC2605233123E No.：BCTC/KJ-RF-ICT-001 Page 7 of 17 Edition：B.1 3. Test Facility And Test Instrument Used 3.1 Test Fa…

Text truncated - open the document above for the full version.

第 1 页 承 認 書 SPECIFICATION FOR APPROVAL 深圳市三盛创电子科技有限公司 Shen zhen SAN SHENG CHUANG Electronic Technology Co.,Ltd 工廠地址：深圳市光明区珍玉二路105号二楼 联系电话：86+13076959310 电子邮件：[email protected] 客 戶： CUSTOMER: 深圳市星之豪科技有限公司 客 戶 料 號： CUST P/N: A12-6.3uh-60mm 三盛创 料 號： FINE P/N: 01.01.01.02.0085 産 品 型 號： DESC: Φ20.5mm*40mm-6.8uH-0.08*24P*2P*10Ts-60mm 日 期： DATE: 2025.10.16 版 本： Version: A.0 擬制 PREPARED BY 審核 CHECKED BY 批准 APPROVED BY 客戶承認 CUSTOMER APPROVE 赵金花 上官禄游 安帅印 第 2 页 版本變更履歷 VersionChangeHistory 版 本 Rev. 變 更 前 Before Change 變 更 後 After Change 更 改 日 期 Chang Date 批 准 Approved By A.0 新发行 ---- 2025.10.16 安帅印 第 3 页 SPECIFICATION 産 品 型 號： D E S C Φ20.5mm*40mm-6.8uH-0.08*24P*2P* 10Ts-60mm 版 本 Rev：A.0 客戶CUST: 深圳市星之豪科技有限公司 客 户 料 号 CUST P/N: A12-6.3uh-60mm 一、尺寸DIMENSION:(mm) 二、原理图SCHEMATIC DIAGRAM: A 40±1.0 B 20.5±0.5 C 42.5±0.5 D 5.3±0.3 E 60±2 F 5±1.0 G 0.5±0.1 H 1.7±0.2 I 3±1 J 41±1 注： 1.交叉出线。 三、绕线参数Winding Specification: 序号 NO. 端子 TERMINAL 线径 WIRE 圈数 Turns 绕线方向 Winding Direction 1 S F 热风线0.08*24P*2P 10Ts CCW 四、电气特性ELECTRICAL CHARACTERISTICS: 温度TEMPERATURE:25±10°C, 湿度RELATIVE HUMIDITY:65±20% 序号 NO. 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TEST FREQUENCY 测试仪器 TEST EQUIPMENTS 1 IND. S-F 6.8uH ±10%加磁片 100KHz/0.25V TM U2832 2 DCR S-F ≤80mΩ 100KHz/0.25V TM U2832 3 Q值 S-F ≥34 mΩ 100KHz/0.25V TM U2832 擬制/日期PREPARED BY/DATE 審核/日期CHECKED BY/DATE 上官禄游2025.10.16 安帅印2025.10.16 第 4 页 SPECIFICATION 產品型號 D E S C Φ20.5mm*40mm-6.8uH-0.08*24P*2P* 10Ts-60mm 版 本 Rev：A.0 客戶: CUST： 深圳市星之豪科技有限公司 客戶料號： CUSTP/N： A12-6.3uh-60mm 材料清单MaterialList: 序号 NO 材料名称 Materialname 品名描述 Description 1 线材 热风线0.08*24P 2 磁片 硬磁片（PC 40料）带槽（42.5±0.5mm，内孔5.3mm， 厚度为0.5±0.1mm） 3 锡条 无铅锡条（高温） 4 高温胶纸 5mm高温胶纸 5 胶水 环保白乳胶 6 背胶 普通白色背胶41mm*8mm 深圳市三盛创电子科技有限公司 Shen zhen SAN SHENG CHUANG Electronic Technology Co.,Ltd 工廠地址：深圳市光明区珍玉二路105号二楼 联系电话：86+13076959310 电子邮件：[email protected]

No.：BCTC/KJ-RF-ICT-001 Page 1 of 31 Edition：B.1 TEST REPORT Shenzhen BCTC Technology Co., Ltd. Report No.: BCTC2605233123-1E Applicant: Case-Mate Inc. Product Name: Magnetic Wireless Power Bank Test Model.: KS056996 Tested Date: 2026-06-12 to 2026-07-30 Issued Date: 2026-07-30 Report No.: BCTC2605550334-1E No.：BCTC/KJ-RF-ICT-001 Page 2 of 31 Edition：B.1 FCC ID: 2AAC4-KS056996 The test report is effective only with both signature and specialized stamp.This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Technology Co., Ltd, this report can’t be reproduced except in full.The tested sample(s) and the sample information are provided by the client. Product Name: Magnetic Wireless Power Bank Trademark: N/A Model/Type Ref.: KS056996 KS057066, CM060104, CM060106, CM060108, CMMSBTRY, KN060960, KN060962, KN060964, LSFMSBTRY, PP060764 Prepared For: Case-Mate Inc. Address: 990 Hammond Dr., Ste. 700, Atlanta, GA 30328-6176, USA Manufacturer: Shunhetai (Shenzhen) Technology Co., Ltd. Address: 201-302, 1th Building, Jiayu Environmental Protection Industrial Park, No. 162, Shajiang Road, Songgang Street, Baoan District, Shenzhen, Guangdong, 518105, CN. Prepared By: Shenzhen BCTC Technology Co., Ltd. Address: Room 101M, Unit 1, Building1, Pengyuan, No.18, Lilang Road, Shanglilang, Nanwan Subdistrict, Longgang District, Shenzhen, Guangdong, China. Sample Received Date: 2026-06-12 Sample tested Date: 2026-06-12 to 2026-07-30 Report No.: BCTC2605233123-1E Test Standards: FCC Part15.209 ANSI C63.10-2020 Test Results: PASS Prepared by : Reviewer by : Approved by: Louis Zeng /Editor Mike Zheng / Supervisor Sewen Guo/Manager Report No.: BCTC2605550334-1E No.：BCTC/KJ-RF-ICT-001 Page 3 of 31 Edition：B.1 Table of Content Test Report Declaration Page 1. Version .................................................................................................................. 4 2. Test Summary ....................................................................................................... 5 3. Measurement Uncertainty ..................................................................................... 6 4. Product Information and Test Setup ...................................................................... 7 4.1 Product Information ................................................................................................. 7 4.2 Test Setup Configuration ......................................................................................... 7 4.3 Support Equipment ............................................................................................... 8 4.4 Test Mode ............................................................................................................. 8 5. Test Facility and Test Instrument Used ................................................................. 8 5.1 Test Facility ........................................................................................................... 9 5.2 Test Instrument Used ............................................................................................ 9 6. Conducted Emissions .......................................................................................... 11 6.1 Block Diagram Of Test Setup ................................................................................ 11 6.2 Limit ....................................................................................................................... 11 6.3 Test Procedure ...................................................................................................... 11 6.4 EUT Operating Conditions ..................................................................................... 12 6.5 Test Result ............................................................................................................ 12 7. Radiated Emissions ............................................................................................. 15 7.1 Block Diagram Of Test Setup ................................................................................ 15 7.2 Limit ....................................................................................................................... 16 7.3 Test Procedure ...................................................................................................... 16 7.4 Test Result .......................................................................................................... 17 8. Bandwidth Test .................................................................................................... 26 9. Antenna Requirements ........................................................................................ 28 10. EUT Test Setup Photographs.............................................................................. 29 Report No.: BCTC2605550334-1E No.：BCTC/KJ-RF-ICT-001 Page 4 of 31 Edition：B.1 1. Version Report No. Issue Date Description Approved BCTC2605233123-1E 2026-07-30 Original Valid Report No.: BCTC2605550334-1E No.：BCTC/KJ-RF-ICT-001 Page 5 of 31 Edition：B.1 2. Test Summary The Product has been tested according to the following specifications: No. Test Parameter Clause No Results 1 Conducted Emission 15.207 PASS* 2 Radiated Emission 15.209 PASS* 3 20dB Bandwidth 15.215 PASS* 4 Antenna Requirement 15.203 PASS Note 1:"N/A" means not applicable in this report. Note 2: "*" indicates that the test results are determined base on CFR 47 FCC Part 15 Subpart C (clause 15.207/209). And the test results are took into account measurement uncertainty(see section 3 for measurement uncertainty information) Report No.: BCTC2605550334-1E No.：BCTC/KJ-RF-ICT-001 Page 6 of 31 Edition：B.1 3. Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the Product as specified in CISPR 16-4-2:2011/AMD2:2018. This uncertainty represents an expanded uncertainty expressed at approximately the 95% conf…

Text truncated - open the document above for the full version.

Report No.: BCTC2605550334E Page 1 of 2 Conducted Measurement Photos Report No.: BCTC2605550334E Page 2 of 2 Radiated Measurement Photos